Re: [Bluez-devel] forcing SCO connection patch

[Dave Young]

On Mon, Feb 25, 2008 at 3:30 PM, Dave Young <hidave.darkstar@xxxxxxxxx> wrote:
> Quote mail from louis@xxxxxxxx :
>
>  2007/12/17 Louis JANG <louis@xxxxxxxx>:
>
>
> > Hello everybody,
>  >
>  >  I attached two patches. the first one(bluez-kernel-forcesco.patch) is to
>  >  force using HCI_OP_ADD_SCO instead of HCI_OP_SETUP_SYNC_CONN, and the
>  >  second one is to handle SCO connection complete event but its request
>  >  was ESCO.
>  >
>  >  1.
>  >  I'm developing bluetooth functions in my linux phone project, and I'm
>  >  using bluez for my job. I've tested lots of headsets, and found that I
>  >  coudn't connect SCO channel with HCI_OP_SETUP_SYNC_CONN in some old
>  >  headsets. I could connect SCO channel with HCI_OP_ADD_SCO in this case.
>  >  however, there is no api to force using SCO instead of ESCO in bluez. so
>  >  I added SCO_FORCESCO to handle this old headsets
>  >
>  >  2.
>  >  When I tried to connect SCO channel with
>  >  HCI_OP_SETUP_SYNC_CONN(LINK_TYPE_ESCO), some bluetooth headsets responds
>  >  with LINK_TYPE_SCO because it did not support ESCO. But bluez couldn't
>  >  handle this situation, and patch_hci_event.c is for this.
>  >
>  >
>  >  BRs
>  >  Louis JANG
>  >
>  >
>
>  Reply from bmidgley@xxxxxxxxx:
>
>  On Mon, Feb 25, 2008 at 2:43 PM, Brad Midgley <bmidgley@xxxxxxxxx> wrote:
>  > Louis
>
> >
>  >
>  >  >  When I tried to connect SCO channel with
>  >  >  HCI_OP_SETUP_SYNC_CONN(LINK_TYPE_ESCO), some bluetooth headsets responds
>  >  >  with LINK_TYPE_SCO because it did not support ESCO. But bluez couldn't
>  >  >  handle this situation, and patch_hci_event.c is for this.
>  >
>
> >  Marcel looked at this patch and came back with the comments below. Can
>  >  you revisit it? I think some other people are seeing the same issues.
>  >  The patch won't go upstream until Marcel likes it.
>  >
>  >  the patch you sent me is fully broken. First of all the coding style
>  >  is wrong. Does nobody have learned this by now? I always look for that
>  >  first before even reading the patch. Second the case where an
>  >  ESCO_LINK returns NULL is broken and will fall over and crash.
>  >
>  >  --
>  >  Brad
>  >
>
>
>  I ever asked marcel about the coding style. please see following thread:
>  http://lkml.org/lkml/2008/1/22/91
>
>  I think the style problem marcel said is
>  1. using kernel codeing style
>  2. marcel's style
>  container_of or get_user_data calls at the top of the variable declaration
>  using the empty lines to seperate code blocks
>
>  Please rework your patch and resend if you fixed them.
>
>  BTW, please use the new bluetooth mailing list for kerne issue.
>  linux-bluetooth@xxxxxxxxxxxxxxx
>
>  (Thanks for andrew and davem)

On bugzilla, bug 9871 are same problem as yours.

add davem and netdev in cc-list

>
>  Regards
>  dave
>
>  Regards
>  dave
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/