Re: device mapper not reporting no-barrier-support?

[Andrew Morton]

On Mon, 25 Feb 2008 14:26:15 +0100 Anders Henke <anders.henke@xxxxxxxx> wrote:

> Hi,
> 
> I'm currently stuck between Kernel LVM and DRBD, as I'm using Kernel
> 2.6.24.2 with DRBD 8.2.5 on top of an LVM2 device (LV).
> 
> -LVM2/device mapper doesn't support write barriers
> -DRBD uses blkdev_issue_flush() to flush its metadata to disk.
>  On a no-barrier-device, DRBD should receive EOPNOTSUPP, but
>  it really does receive an EIO. Promptly, DRBD gives the
>  error message "drbd0: local disk flush failed with status -5".
> 
> The physical disk (in LVM speak) is a RAID1 on a 3ware 9650SE-2LP
> controller; the driver 3w-9xxx supports barriers and after moving my D
> RBD device from the LV to a single partition on the same RAID1, the 
> error messages from DRBD vanished.
> 
> I've posted a lengty summary of my findings to
> 
> http://lists.linbit.com/pipermail/drbd-user/2008-February/008665.html
> 
> ... where Lars Ellenberg from DRBD basically responded in
> 
> http://lists.linbit.com/pipermail/drbd-user/2008-February/008666.html
> 
> ... that DRBD does catch the EOPNOTSUPP for blkdev_issue_flush and
> BIO_RW_BARRIER, but the lvm implementation of blkdev_issue_flush in
> 2.6.24.2 aparently does return EIO for blkdev_issue_flush.
> 
> So simply the question: how should a top-layer driver check wether a lower
> device does support barriers? md-raid does check this way differently than
> e.g. XFS does, while DRBD also adds a third way to check this.
> Or is this "merely" a bug in drivers/md/dm.c?
> 

(cc dm-devel)

I'd say it's a DM bug.  Probably a hard-to-fix one though.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/