Re: Sata-MV, Intergated Sata Device Support

[Mark Lord]

Jeff Garzik wrote:
> Jon Li wrote:
> > Hello,
> >
> > I am curious as to whether there are plans to add support for integrated
> > sata devices.  I personally want to add support for a 60x1C0 based
> > device (pci:id = 0x5182).  I think adding support should be relatively
> > simple, except for a few issues outlined below.
> >
> > In the original mvSata.c (ver3.4) that has 0x5182 support, the config
> > space is as such:
> >
> > case MV_SATA_DEVICE_ID_5182:
> >         pAdapter->numberOfChannels = MV_SATA_5182_PORT_NUM;
> >         pAdapter->numberOfUnits = 1;
> >         pAdapter->portsPerUnit = 2;
> >         pAdapter->sataAdapterGeneration = MV_SATA_GEN_IIE;
> >         /*The integrated sata core chip based on 60x1 C0*/
> >         pAdapter->chipIs60X1C0 = MV_TRUE;
> >         pAdapter->hostInterface = MV_HOST_IF_INTEGRATED;
> >         pAdapter->mainMaskOffset = 0x20024; /*the iobaseaddress is
> > 0x60000*/
> >         pAdapter->mainCauseOffset = 0x20020;
> >         break;
> >
> > I have not yet figured out how all these values are defined in sata-mv.c
> > (ver 0.8).  Specifically, where do I define "numberOfChannels" which
> > should equal 2, and "numberOfUnits" which obviously equals 1?
> >
> > I have a current config space (not completed) for sata-mv.c which is:
> >
> >     {  /* chip_5182 */
> >         .sht        = &mv_sht,
> >         .flags        = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
> >                    MV_FLAG_DUAL_HC),
> >         .pio_mask    = 0x1f,    /* pio0-4 */
> >         .udma_mask    = 0x7f,    /* udma0-6 */
> >         .port_ops    = &mv6_ops,
> >     },
...

Saeed:  isn't this what your SOC patches already implemented for us?
As near as I can tell, sata_mv now already has support for the 60x1C0.

-ml
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/