Re: bcm43xx regression in 2.6.24 (with patch)

[Alexey Zaytsev]

On Wed, Feb 27, 2008 at 3:27 AM, Michael Buesch <mb@xxxxxxxxx> wrote:
>
> On Wednesday 27 February 2008 01:23:17 Alexey Zaytsev wrote:
>  > On Wed, Feb 27, 2008 at 1:47 AM, John W. Linville
>  > <linville@xxxxxxxxxxxxx> wrote:
>  > > On Wed, Feb 27, 2008 at 01:12:32AM +0300, Alexey Zaytsev wrote:
>  > >  > On Wed, Feb 27, 2008 at 1:04 AM, Michael Buesch <mb@xxxxxxxxx> wrote:
>  > >
>  > >
>  > > > >  Besides that the bcm43xx driver is not broken. That's the whole reason
>  > >  > >  this damn thread started at all. So it can't be broken.
>  > >  > >
>  > >  > Can't agree here. The bcm43xx driver used to work with 2.6.23 without requiring
>  > >  > any module magic.
>  > >
>  > >  At the risk of prolonging things... :-(
>  > >
>  > >  Isn't the fundamental problem here that the ssb driver claims the same
>  > >  PCI IDs as the bcm43xx driver?  He have hit this same issue a number
>  > >  of times: 8139too vs.  8139cp, eepro vs. e100, sk98lin vs. skge,
>  > >  and I'm sure there are more.  I admit that this situation is a bit
>  > >  more confusing, since the user is less likely to predict a conflict
>  > >  between bcm43xx and the ssb driver.  This is especially true since
>  > >  the user isn't even selecting ssb directly, but is instead selecting
>  > >  the apparently unrelated b44.
>  > >
>  > >  Still, the bcm43xx driver is not fundamentally damaged.  This is
>  > >  fundamentally a "two drivers claiming the same PCI ID" issue, not a
>  > >  "you broke my driver" one.
>  >
>  > Is there any reason the ssb driver should claim the bcm43xx pci ids in
>  > the first place? I have very little understanding what the Sonic Silicon
>  > Backplane really is, but I see that the b44 driver claims its PCI ids
>  > directly. I also think I understand why the b43/b43legacy drivers can't
>  > claim the ids directly: because the driver-device matching is done not
>  > with the pci bus methods, but with the ssb bus methods, and it would
>  > be impossible to automatically choose the right driver for the right
>  > device (with same ssb ids), as the first of the two drivers loaded would
>  > succeed in probe()'ing the pci "ssb bridge" device, and not letting the
>  > other to take control, even after moments later the ssb probe for the
>  > non-supported ssb device would fail. (Or am I completely wrong?)
>  >
>  > That said, I still think that the ssb driver claims the wrong pci ids,
>  > which is especially wrong if the the b43/b43legacy drivers are not
>  > even built. And my patch fixes exactly this problem - the ssb driver
>  > no more claims the broadcom pci ids, when the b43/b43legacy drivers
>  > are not built.
>  >
>  > One better solution I think might be to move the b43_pci_bridge.c
>  > code to a separate module, and let the b43/b43legacy drivers
>  > depend on it, but as I said, I have little knowledge in the
>  > ssb stuff, so I did it the easy way.
>
>  See the comment in b43_pci_bridge.c
>
Yes, I've seen it. And this design, kind of, causes me some trouble. ^

>  --
>  Greetings Michael.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/