Re: Performance problems with 3ware 9500S-4LP and 2.6.25-rc3

[Chris Snook]

Andre Noll wrote:
> On 13:33, Chris Snook wrote:
>
> > > During the daily cron job that uses rsync to sync a 500G file system
> > >from another machine to the raid on the 3ware controller the load
> > > jumps up, and the machine becomes sluggish as hell. For example, an
> > > ssh login to that machine takes minutes to complete and ldap becomes
> > > unreliable while the rsync job is running. Even Nagios complains
> > > about the machine being down while rsync is running.
> > You're putting your box under astronomical load.  This is generally 
> > regarded as a bad idea, regardless of how well your storage controller 
> > is performing.
>
> The machine becomes sluggish also when I write directly to the raid
> array. A simple
>
> 	dd if=/dev/zero of=tmpfile
>
> shouldn't push the load up to 4, right?

Actually, it's normal for pdflush to spawn up to 8 threads when you're 
dirtying memory faster than it can be written to disk.  Load going to 4 
is not abnormal.  ssh logins taking minutes is very abnormal.

> > Can you measure the single-threaded throughput (say, 
> > coping one huge file, and then syncing) to give us a baseline 
> > performance figure?
>
> Single threaded throughput seems to be ok (140M/s). The problem is
> that the machine becomes unresponsive.

Does the machine become unresponsive during the single-threaded test, or 
only when doing the rsync?

	-- Chris
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/