Re: [PATCH 2/8] NTP4 user space bits update

[john stultz]

On Fri, 2008-03-14 at 19:40 +0100, zippel@xxxxxxxxxxxxxx wrote:
> plain text document attachment (ntp4_user)
> This adds a few more things from the ntp nanokernel related to user
> space. It's now possible to select the resolution used of some values
> via STA_NANO and the kernel reports in which mode it works (pll/fll).
> 
> If some values for adjtimex() are outside the acceptable range, they are
> now simply normalized instead of letting the syscall fail.
> I removed MOD_CLKA/MOD_CLKB as the mapping didn't really makes any
> sense, the kernel doesn't support setting the clock.
> 
> Signed-off-by: Roman Zippel <zippel@xxxxxxxxxxxxxx>

I've not looked up the new NTP4-ims, but few comments below.

> ---
>  include/linux/timex.h |   12 ++++--
>  kernel/time/ntp.c     |   91 +++++++++++++++++++++++++-------------------------
>  2 files changed, 56 insertions(+), 47 deletions(-)
> 
> Index: linux-2.6/include/linux/timex.h
> ===================================================================
> --- linux-2.6.orig/include/linux/timex.h	2008-03-13 10:42:20.000000000 +0100
> +++ linux-2.6/include/linux/timex.h	2008-03-13 10:48:59.000000000 +0100
> @@ -58,6 +58,8 @@
> 
>  #include <asm/param.h>
> 
> +#define NTP_API		4	/* NTP API version */
> +
>  /*
>   * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
>   * for a slightly underdamped convergence characteristic. SHIFT_KH
> @@ -135,6 +137,8 @@ struct timex {
>  #define ADJ_ESTERROR		0x0008	/* estimated time error */
>  #define ADJ_STATUS		0x0010	/* clock status */
>  #define ADJ_TIMECONST		0x0020	/* pll time constant */
> +#define ADJ_MICRO		0x1000	/* select microsecond resolution */
> +#define ADJ_NANO		0x2000	/* select nanosecond resolution */
>  #define ADJ_TICK		0x4000	/* tick value */
>  #define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
>  #define ADJ_OFFSET_SS_READ	0xa001  /* read-only adjtime */
> @@ -146,8 +150,6 @@ struct timex {
>  #define MOD_ESTERROR	ADJ_ESTERROR
>  #define MOD_STATUS	ADJ_STATUS
>  #define MOD_TIMECONST	ADJ_TIMECONST
> -#define MOD_CLKB	ADJ_TICK
> -#define MOD_CLKA	ADJ_OFFSET_SINGLESHOT /* 0x8000 in original */
> 
> 
>  /*
> @@ -169,9 +171,13 @@ struct timex {
>  #define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
> 
>  #define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
> +#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
> +#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
> +#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
> 
> +/* read-only bits */
>  #define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
> -    STA_PPSERROR | STA_CLOCKERR) /* read-only bits */
> +	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
> 
>  /*
>   * Clock states (time_state)
> Index: linux-2.6/kernel/time/ntp.c
> ===================================================================
> --- linux-2.6.orig/kernel/time/ntp.c	2008-03-13 10:42:20.000000000 +0100
> +++ linux-2.6/kernel/time/ntp.c	2008-03-13 10:47:49.000000000 +0100
> @@ -65,7 +65,9 @@ static void ntp_update_offset(long offse
>  	if (!(time_status & STA_PLL))
>  		return;
> 
> -	time_offset = offset * NSEC_PER_USEC;
> +	time_offset = offset;
> +	if (!(time_status & STA_NANO))
> +		time_offset *= NSEC_PER_USEC;
> 
>  	/*
>  	 * Scale the phase adjustment and
> @@ -86,8 +88,11 @@ static void ntp_update_offset(long offse
>  	freq_adj = time_offset * mtemp;
>  	freq_adj = shift_right(freq_adj, time_constant * 2 +
>  			   (SHIFT_PLL + 2) * 2 - SHIFT_NSEC);
> -	if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC))
> +	time_status &= ~STA_MODE;
> +	if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC)) {
>  		freq_adj += div_s64(time_offset << (SHIFT_NSEC - SHIFT_FLL), mtemp);
> +		time_status |= STA_MODE;
> +	}
>  	freq_adj += time_freq;
>  	freq_adj = min(freq_adj, (s64)MAXFREQ_NSEC);
>  	time_freq = max(freq_adj, (s64)-MAXFREQ_NSEC);
> @@ -272,6 +277,7 @@ static inline void notify_cmos_timer(voi
>   */
>  int do_adjtimex(struct timex *txc)
>  {
> +	struct timespec ts;
>  	long save_adjust;
>  	int result;
> 
> @@ -282,17 +288,11 @@ int do_adjtimex(struct timex *txc)
>  	/* Now we validate the data before disabling interrupts */
> 
>  	if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT) {
> -	  /* singleshot must not be used with any other mode bits */
> -		if (txc->modes != ADJ_OFFSET_SINGLESHOT &&
> -					txc->modes != ADJ_OFFSET_SS_READ)
> +		/* singleshot must not be used with any other mode bits */
> +		if (txc->modes & ~ADJ_OFFSET_SS_READ)
>  			return -EINVAL;

This could probably go in the cleanup patch, no?


>  	}
> 
> -	if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
> -	  /* adjustment Offset limited to +- .512 seconds */
> -		if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
> -			return -EINVAL;
> -
>  	/* if the quartz is off by more than 10% something is VERY wrong ! */
>  	if (txc->modes & ADJ_TICK)
>  		if (txc->tick <  900000/USER_HZ ||
> @@ -300,51 +300,46 @@ int do_adjtimex(struct timex *txc)
>  			return -EINVAL;
> 
>  	write_seqlock_irq(&xtime_lock);
> -	result = time_state;	/* mostly `TIME_OK' */
> 
>  	/* Save for later - semantics of adjtime is to return old value */
>  	save_adjust = time_adjust;
> 
> -#if 0	/* STA_CLOCKERR is never set yet */
> -	time_status &= ~STA_CLOCKERR;		/* reset STA_CLOCKERR */
> -#endif

This as well is just cleanup.


>  	/* If there are input parameters, then process them */
>  	if (txc->modes) {
> -		if (txc->modes & ADJ_STATUS)	/* only set allowed bits */
> -			time_status = (txc->status & ~STA_RONLY) |
> -				      (time_status & STA_RONLY);
> +		if (txc->modes & ADJ_STATUS) {
> +			if ((time_status & STA_PLL) &&
> +			    !(txc->status & STA_PLL)) {
> +				time_state = TIME_OK;
> +				time_status = STA_UNSYNC;
> +			}
> +			/* only set allowed bits */
> +			time_status &= STA_RONLY;
> +			time_status |= txc->status & ~STA_RONLY;
> +		}

More cleanup.


> +		if (txc->modes & ADJ_NANO)
> +			time_status |= STA_NANO;
> +		if (txc->modes & ADJ_MICRO)
> +			time_status &= ~STA_NANO;
> 
>  		if (txc->modes & ADJ_FREQUENCY) {
> -			if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
> -				result = -EINVAL;
> -				goto leave;
> -			}
> -			time_freq = ((s64)txc->freq * NSEC_PER_USEC)
> +			time_freq = min(txc->freq, MAXFREQ);
> +			time_freq = min(time_freq, -MAXFREQ);
> +			time_freq = ((s64)time_freq * NSEC_PER_USEC)
>  					>> (SHIFT_USEC - SHIFT_NSEC);
>  		}
> 
> -		if (txc->modes & ADJ_MAXERROR) {
> -			if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
> -				result = -EINVAL;
> -				goto leave;
> -			}
> +		if (txc->modes & ADJ_MAXERROR)
>  			time_maxerror = txc->maxerror;
> -		}
> -
> -		if (txc->modes & ADJ_ESTERROR) {
> -			if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
> -				result = -EINVAL;
> -				goto leave;
> -			}
> +		if (txc->modes & ADJ_ESTERROR)
>  			time_esterror = txc->esterror;
> -		}
> 
>  		if (txc->modes & ADJ_TIMECONST) {
> -			if (txc->constant < 0) {	/* NTP v4 uses values > 6 */
> -				result = -EINVAL;
> -				goto leave;
> -			}
> -			time_constant = min(txc->constant + 4, (long)MAXTC);
> +			time_constant = txc->constant;
> +			if (!(time_status & STA_NANO))
> +				time_constant += 4;
> +			time_constant = min(time_constant, (long)MAXTC);
> +			time_constant = max(time_constant, 0l);
>  		}
> 
>  		if (txc->modes & ADJ_OFFSET) {
> @@ -360,16 +355,20 @@ int do_adjtimex(struct timex *txc)
>  		if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
>  			ntp_update_frequency();
>  	}
> -leave:
> +
> +	result = time_state;	/* mostly `TIME_OK' */
>  	if (time_status & (STA_UNSYNC|STA_CLOCKERR))
>  		result = TIME_ERROR;
> 
>  	if ((txc->modes == ADJ_OFFSET_SINGLESHOT) ||
>  	    (txc->modes == ADJ_OFFSET_SS_READ))
>  		txc->offset = save_adjust;
> -	else
> +	else {
>  		txc->offset = ((long)shift_right(time_offset, SHIFT_UPDATE)) *
> -	    			NTP_INTERVAL_FREQ / 1000;
> +	    			NTP_INTERVAL_FREQ;
> +		if (!(time_status & STA_NANO))
> +			txc->offset /= NSEC_PER_USEC;
> +	}
>  	txc->freq	   = (time_freq / NSEC_PER_USEC) <<
>  				(SHIFT_USEC - SHIFT_NSEC);
>  	txc->maxerror	   = time_maxerror;
> @@ -391,7 +390,11 @@ leave:
>  	txc->stbcnt	   = 0;
>  	write_sequnlock_irq(&xtime_lock);
> 
> -	do_gettimeofday(&txc->time);
> +	getnstimeofday(&ts);
> +	txc->time.tv_sec = ts.tv_sec;
> +	txc->time.tv_usec = ts.tv_nsec;
> +	if (!(time_status & STA_NANO))
> +		txc->time.tv_usec /= NSEC_PER_USEC;



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/