tg3 bad performance, lots of hardware interrupts

From: Harald Hannelius
Date: Thu Mar 27 2008 - 10:07:25 EST



Hi there,

I experience a lot of hardware interrupts with a BCM5751 PCI-express NIC (tg3). modprobe tg3, ifconfig ethX up and friends makes the system unresponsive. Just having the interface up makes the system sluggish.

Onboard forcedeth works fine (with the same cable).

iperf gives me just 2Mbps on a 1Gbps ethernet. Load average near 1.0. top reports 40-50%hi (hardware interrupts) when generating traffic over that interface.

The system is a Supermicro H8SMI-2 motherboard, HP EA833AA BROADCOM NETXTREME PCI-express NIC, 2GB RAM, Dual-Core opteron 2.8GHz.

All of our other servers with broadcom NIC's work fine with tg3, but they aren't PCI-express.

I have tried booting with pci=nomsi and pci=routeirq (BIOS with or without "pnp OS" defined). Ubuntu 7.10 live-cd same result. Haven't tried other OS'es.

irq_balancing enabled.

Kernel conf: http://www.iki.fi/~harald/kernconf.gz (9kB).

Any hints on what to check for? Hardware or tg3 driverproblem?


I would be glad to report more info, if needed. I have profiling support but I have never profiled a kernel before. I haven't got any other PCI-e NIC's to test with, yet.


# uname -r
2.6.24.4

# dmesg|grep tg
tg3.c:v3.86 (November 9, 2007)

# lspci -vvv
07:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 21)
Subsystem: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 216
Region 0: Memory at febf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
Address: 00000000fee0300c Data: 4142
Capabilities: [d0] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <4us, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <4us, L1 <64us
Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1


--
A: Top Posters! | s/y Charlotta |
Q: What is the most annoying thing on mailing lists? | FIN-2674 |
http://www.fe83.org/ Finn Express Purjehtijat ry | ============= |
Harald H Hannelius | harald (At) iki (dot) fi | GSM +358 50 594 1020
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/