Re: nobody cared about IRQ 19 (firewire, on a HP 2510p notebook)
From: Martin Michlmayr
Date: Mon Mar 31 2008 - 05:57:27 EST
* Thomas Gleixner <tglx@xxxxxxxxxxxxx> [2008-03-30 22:10]:
> Can we please have a full boot log (dmesg) and the output of /proc/interrupts and "lspci -vvv"
I've attached all of that information.
--
Martin Michlmayr
http://www.cyrius.com/
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-rc7-amd64 (Debian 2.6.25~rc7-1~experimental.1~snapshot.11011) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Sun Mar 30 17:36:02 CEST 2008
[ 0.000000] Command line: root=/dev/mapper/lucky-root ro vga=791
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7b0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7b0000 - 000000007f7c5400 (reserved)
[ 0.000000] BIOS-e820: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7e7fb8 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 522160) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F77A0, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7F7C81C4, 0074 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: FACP 7F7C8084, 00F4 (r4 HP 30C9 3 HP 1)
[ 0.000000] ACPI: DSDT 7F7C84C0, 13484 (r1 HP nc2500 10000 MSFT 3000001)
[ 0.000000] ACPI: FACS 7F7E7D80, 0040
[ 0.000000] ACPI: SLIC 7F7C8238, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: HPET 7F7C83B0, 0038 (r1 HP 30C9 1 HP 1)
[ 0.000000] ACPI: APIC 7F7C83E8, 0068 (r1 HP 30C9 1 HP 1)
[ 0.000000] ACPI: MCFG 7F7C8450, 003C (r1 HP 30C9 1 HP 1)
[ 0.000000] ACPI: TCPA 7F7C848C, 0032 (r2 HP 30C9 1 HP 1)
[ 0.000000] ACPI: SSDT 7F7DB944, 02BE (r1 HP HPQPAT 1 MSFT 3000001)
[ 0.000000] ACPI: SSDT 7F7DC586, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7F7DC7E5, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7F7DC88B, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f7b0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 522160) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007f7b0000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000022ef7] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-6464a7] TEXT DATA BSS
[ 0.000000] early res: 3 [37909000-37fef295] RAMDISK
[ 0.000000] early res: 4 [9fc00-a0bff] EBDA
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] No mptable found.
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 522160
[ 0.000000] On node 0 totalpages: 522063
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1102 pages reserved
[ 0.000000] DMA zone: 2841 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7082 pages used for memmap
[ 0.000000] DMA32 zone: 510982 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35224 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513823
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/lucky-root ro vga=791
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000002] time.c: Detected 1196.998 MHz processor.
[ 0.000033] Console: colour dummy device 80x25
[ 0.000037] console [tty0] enabled
[ 0.000312] Checking aperture...
[ 0.000331] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000334] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2047828k/2088640k available (2205k kernel code, 40424k reserved, 1027k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.080009] Calibrating delay using timer specific routine.. 2397.27 BogoMIPS (lpj=4794551)
[ 0.080086] Security Framework initialized
[ 0.080096] SELinux: Disabled at boot.
[ 0.080103] Capability LSM initialized
[ 0.080473] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.082281] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.083199] Mount-cache hash table entries: 256
[ 0.083436] Initializing cgroup subsys ns
[ 0.083445] Initializing cgroup subsys cpuacct
[ 0.083478] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.083485] CPU: L2 cache: 2048K
[ 0.083492] CPU 0/0 -> Node 0
[ 0.083496] CPU: Physical Processor ID: 0
[ 0.083501] CPU: Processor Core ID: 0
[ 0.083514] CPU0: Thermal monitoring handled by SMI
[ 0.083516] using mwait in idle threads.
[ 0.084014] ACPI: Core revision 20070126
[ 0.159849] Using local APIC timer interrupts.
[ 0.160012] APIC timer calibration result 8312498
[ 0.160015] Detected 8.312 MHz APIC timer.
[ 0.160257] Booting processor 1/2 APIC 0x1
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 2394.01 BogoMIPS (lpj=4788021)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Core(TM)2 Duo CPU U7600 @ 1.20GHz stepping 0d
[ 0.248605] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.252053] Brought up 2 CPUs
[ 0.252179] CPU0 attaching sched-domain:
[ 0.252183] domain 0: span 00000003
[ 0.252186] groups: 00000001 00000002
[ 0.252191] domain 1: span 00000003
[ 0.252194] groups: 00000003
[ 0.252198] CPU1 attaching sched-domain:
[ 0.252201] domain 0: span 00000003
[ 0.252203] groups: 00000002 00000001
[ 0.252208] domain 1: span 00000003
[ 0.252210] groups: 00000003
[ 0.252623] net_namespace: 1016 bytes
[ 0.252633] Booting paravirtualized kernel on bare hardware
[ 0.252958] NET: Registered protocol family 16
[ 0.253267] ACPI: bus type pci registered
[ 0.253402] PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
[ 0.253409] PCI: Not using MMCONFIG.
[ 0.253414] PCI: Using configuration type 1
[ 0.256981] ACPI: EC: Look up EC in DSDT
[ 0.006529] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.352927] ACPI: Interpreter enabled
[ 0.352935] ACPI: (supports S0 S3 S4 S5)
[ 0.352961] ACPI: Using IOAPIC for interrupt routing
[ 0.373140] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.373149] ACPI: EC: driver started in interrupt mode
[ 0.373254] ACPI: PCI Root Bridge [C003] (0000:00)
[ 0.374568] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.374580] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[ 0.375467] PCI: Transparent bridge - 0000:00:1e.0
[ 0.375547] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.376539] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT]
[ 0.376876] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT]
[ 0.377174] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT]
[ 0.457624] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
[ 0.458064] ACPI: PCI Interrupt Link [C130] (IRQs *10 11)
[ 0.458499] ACPI: PCI Interrupt Link [C131] (IRQs 10 *11)
[ 0.458932] ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5
[ 0.459369] ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
[ 0.459788] ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled.
[ 0.460232] ACPI: PCI Interrupt Link [C144] (IRQs 10 *11)
[ 0.460437] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
[ 0.460798] ACPI: Power Resource [C29F] (on)
[ 0.460907] ACPI: Power Resource [C1C7] (off)
[ 0.461123] ACPI: Power Resource [C3AD] (off)
[ 0.461329] ACPI: Power Resource [C3B0] (off)
[ 0.461535] ACPI: Power Resource [C3C3] (off)
[ 0.461741] ACPI: Power Resource [C3C4] (off)
[ 0.461945] ACPI: Power Resource [C3C5] (off)
[ 0.462148] ACPI: Power Resource [C3C6] (off)
[ 0.462352] ACPI: Power Resource [C3C7] (off)
[ 0.462616] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.462672] pnp: PnP ACPI init
[ 0.462686] ACPI: bus type pnp registered
[ 0.462990] 00:00: calling quirk 0xffffffff8035b6ca: quirk_system_pci_resources+0x0/0x173()
[ 0.463069] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.470412] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.471723] pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.471808] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.471891] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.471970] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.472054] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.472449] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.472543] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.472638] pnp 00:09: Plug and Play ACPI device, IDs SYN0130 SYN0100 SYN0002 PNP0f13 (active)
[ 0.473563] 00:0a: calling quirk 0xffffffff8035b6ca: quirk_system_pci_resources+0x0/0x173()
[ 0.473649] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.477980] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.478106] 00:0c: calling quirk 0xffffffff8035b6ca: quirk_system_pci_resources+0x0/0x173()
[ 0.478202] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.480866] 00:0d: calling quirk 0xffffffff8035b6ca: quirk_system_pci_resources+0x0/0x173()
[ 0.480975] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.481004] pnp: PnP ACPI: found 14 devices
[ 0.481011] ACPI: ACPI bus type pnp unregistered
[ 0.481290] usbcore: registered new interface driver usbfs
[ 0.481382] usbcore: registered new interface driver hub
[ 0.481448] usbcore: registered new device driver usb
[ 0.481654] PCI: Using ACPI for IRQ routing
[ 0.481661] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.508048] NET: Registered protocol family 8
[ 0.508054] NET: Registered protocol family 20
[ 0.508116] PCI-GART: No AMD northbridge found.
[ 0.508130] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
[ 0.508139] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.509204] ACPI: RTC can wake from S4
[ 0.512044] Switched to high resolution mode on CPU 0
[ 0.260027] Switched to high resolution mode on CPU 1
[ 0.524049] pnp: the driver 'system' has been registered
[ 0.524065] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.524074] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.524082] system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.524090] system 00:00: driver attached
[ 0.524104] system 00:0a: ioport range 0x500-0x55f has been reserved
[ 0.524114] system 00:0a: ioport range 0x800-0x80f has been reserved
[ 0.524122] system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.524132] system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.524139] system 00:0a: driver attached
[ 0.524148] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 0.524156] system 00:0c: ioport range 0x2f8-0x2ff has been reserved
[ 0.524163] system 00:0c: ioport range 0x3f8-0x3ff has been reserved
[ 0.524170] system 00:0c: ioport range 0x1000-0x107f has been reserved
[ 0.524178] system 00:0c: ioport range 0x1100-0x113f has been reserved
[ 0.524185] system 00:0c: ioport range 0x1200-0x121f has been reserved
[ 0.524193] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.524201] system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.524210] system 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.524219] system 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.524228] system 00:0c: iomem range 0xfed90000-0xfed99fff could not be reserved
[ 0.524236] system 00:0c: driver attached
[ 0.524244] system 00:0d: iomem range 0xcee00-0xcffff has been reserved
[ 0.524251] system 00:0d: iomem range 0xd2000-0xd3fff has been reserved
[ 0.524259] system 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved
[ 0.524268] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.524276] system 00:0d: driver attached
[ 0.524915] PCI: Bridge: 0000:00:1c.0
[ 0.524921] IO window: disabled.
[ 0.524930] MEM window: disabled.
[ 0.524938] PREFETCH window: disabled.
[ 0.524950] PCI: Bridge: 0000:00:1c.1
[ 0.524954] IO window: disabled.
[ 0.524964] MEM window: 0xe0000000-0xe00fffff
[ 0.524973] PREFETCH window: disabled.
[ 0.524990] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 0.524995] IO window: 0x00003000-0x000030ff
[ 0.525005] IO window: 0x00003400-0x000034ff
[ 0.525014] PREFETCH window: 0x88000000-0x8bffffff
[ 0.525024] MEM window: 0x8c000000-0x8fffffff
[ 0.525033] PCI: Bridge: 0000:00:1e.0
[ 0.525040] IO window: 3000-3fff
[ 0.525050] MEM window: 0xe0100000-0xe03fffff
[ 0.525059] PREFETCH window: 0x0000000088000000-0x000000008bffffff
[ 0.525103] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.525117] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.525149] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.525162] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.525180] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.525204] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.525269] NET: Registered protocol family 2
[ 0.560220] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.561439] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.564750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.565650] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.565658] TCP reno registered
[ 0.576334] checking if image is initramfs... it is
[ 1.544147] Freeing initrd memory: 7064k freed
[ 1.302450] audit: initializing netlink socket (disabled)
[ 1.302486] type=2000 audit(1206956948.549:1): initialized
[ 1.302799] Total HugeTLB memory allocated, 0
[ 1.302957] VFS: Disk quotas dquot_6.5.1
[ 1.303003] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.303140] io scheduler noop registered
[ 1.303146] io scheduler anticipatory registered
[ 1.303152] io scheduler deadline registered
[ 1.303174] io scheduler cfq registered (default)
[ 1.303191] pci 0000:00:02.0: Boot video device
[ 1.303490] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.303546] assign_interrupt_mode Found MSI capability
[ 1.303612] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.303758] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.303812] assign_interrupt_mode Found MSI capability
[ 1.303873] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.304567] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000900000, using 3072k, total 7616k
[ 1.304577] vesafb: mode is 1024x768x16, linelength=2048, pages=3
[ 1.304584] vesafb: scrolling: redraw
[ 1.304590] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.324650] Console: switching to colour frame buffer device 128x48
[ 1.344940] fb0: VESA VGA frame buffer device
[ 1.348618] Real Time Clock Driver v1.12ac
[ 1.349161] hpet_resources: 0xfed00000 is busy
[ 1.349279] Linux agpgart interface v0.103
[ 1.349441] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.350145] pnp: the driver 'serial' has been registered
[ 1.350483] isa bounce pool size: 16 pages
[ 1.351884] brd: module loaded
[ 1.352111] input: Macintosh mouse button emulation as /class/input/input0
[ 1.352520] pnp: the driver 'i8042 kbd' has been registered
[ 1.352538] i8042 kbd 00:08: driver attached
[ 1.352584] pnp: the driver 'i8042 aux' has been registered
[ 1.352611] i8042 aux 00:09: driver attached
[ 1.352659] PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12
[ 1.354957] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.355932] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.356099] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.356298] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.356497] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.356696] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.384202] mice: PS/2 mouse device common for all mice
[ 1.384446] cpuidle: using governor ladder
[ 1.384593] cpuidle: using governor menu
[ 1.385299] TCP bic registered
[ 1.385430] NET: Registered protocol family 1
[ 1.385615] NET: Registered protocol family 17
[ 1.385990] registered taskstats version 1
[ 1.386283] Freeing unused kernel memory: 372k freed
[ 1.408034] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.667455] ACPI: Transitioning device [C3B1] to D3
[ 1.668216] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 1.672120] ACPI: Fan [C3B1] (off)
[ 1.676533] ACPI: Transitioning device [C3B2] to D3
[ 1.680180] ACPI: PNP0C0B:01 is registered as cooling_device1
[ 1.684120] ACPI: Fan [C3B2] (off)
[ 1.692275] ACPI: Transitioning device [C3C8] to D3
[ 1.696170] ACPI: PNP0C0B:02 is registered as cooling_device2
[ 1.700124] ACPI: Fan [C3C8] (off)
[ 1.708448] ACPI: Transitioning device [C3C9] to D3
[ 1.712171] ACPI: PNP0C0B:03 is registered as cooling_device3
[ 1.716124] ACPI: Fan [C3C9] (off)
[ 1.720504] ACPI: Transitioning device [C3CA] to D3
[ 1.724169] ACPI: PNP0C0B:04 is registered as cooling_device4
[ 1.728123] ACPI: Fan [C3CA] (off)
[ 1.736384] ACPI: Transitioning device [C3CB] to D3
[ 1.740170] ACPI: PNP0C0B:05 is registered as cooling_device5
[ 1.744124] ACPI: Fan [C3CB] (off)
[ 1.752169] ACPI: Transitioning device [C3CC] to D3
[ 1.756174] ACPI: PNP0C0B:06 is registered as cooling_device6
[ 1.760125] ACPI: Fan [C3CC] (off)
[ 2.044889] ACPI: SSDT 7F7DBCCA, 023D (r1 HP Cpu0Ist 3000 INTL 20060317)
[ 2.052394] ACPI: SSDT 7F7DBF8C, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317)
[ 2.071031] Monitor-Mwait will be used to enter C-1 state
[ 2.071036] Monitor-Mwait will be used to enter C-2 state
[ 2.071234] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.072200] ACPI: ACPI0007:00 is registered as cooling_device7
[ 2.076141] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.080649] ACPI: SSDT 7F7DBC02, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
[ 2.084599] ACPI: SSDT 7F7DBF07, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
[ 1.834505] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 2.091059] Marking TSC unstable due to TSC halts in idle
[ 1.836206] ACPI: ACPI0007:01 is registered as cooling_device8
[ 1.840129] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.848840] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.852468] ACPI: Thermal Zone [TZ6] (25 C)
[ 1.877151] ACPI: LNXTHERM:02 is registered as thermal_zone1
[ 1.884428] ACPI: Thermal Zone [TZ0] (36 C)
[ 1.895862] ACPI: LNXTHERM:03 is registered as thermal_zone2
[ 1.897449] ACPI: Thermal Zone [TZ1] (40 C)
[ 1.907944] ACPI: LNXTHERM:04 is registered as thermal_zone3
[ 1.912265] ACPI: Thermal Zone [TZ3] (29 C)
[ 1.928287] ACPI: LNXTHERM:05 is registered as thermal_zone4
[ 2.249594] ACPI: Thermal Zone [TZ4] (28 C)
[ 1.950447] ACPI: LNXTHERM:06 is registered as thermal_zone5
[ 2.266800] ACPI: Thermal Zone [TZ5] (66 C)
[ 2.440785] USB Universal Host Controller Interface driver v3.0
[ 2.444629] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.448589] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 2.448595] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.452815] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.456629] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002040
[ 2.460795] usb usb1: configuration #1 chosen from 1 choice
[ 2.464628] hub 1-0:1.0: USB hub found
[ 2.468597] hub 1-0:1.0: 2 ports detected
[ 2.845333] Uniform Multi-Platform E-IDE driver
[ 2.847531] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.584987] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.588605] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.592585] usb usb1: Product: UHCI Host Controller
[ 2.596585] usb usb1: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 2.600585] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.604634] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 2.608595] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 2.608601] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.612657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 2.616629] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00002060
[ 2.620739] usb usb2: configuration #1 chosen from 1 choice
[ 2.624621] hub 2-0:1.0: USB hub found
[ 2.628594] hub 2-0:1.0: 2 ports detected
[ 2.736748] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.740629] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.744631] usb usb2: Product: UHCI Host Controller
[ 2.748620] usb usb2: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 2.752618] usb usb2: SerialNumber: 0000:00:1a.1
[ 2.756672] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 2.760631] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.760638] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.764688] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 2.768657] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002080
[ 2.772775] usb usb3: configuration #1 chosen from 1 choice
[ 2.776656] hub 3-0:1.0: USB hub found
[ 2.780629] hub 3-0:1.0: 2 ports detected
[ 3.263285] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 2.891436] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.895350] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.899352] usb usb3: Product: UHCI Host Controller
[ 2.903351] usb usb3: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 2.907353] usb usb3: SerialNumber: 0000:00:1d.0
[ 2.911392] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 2.915359] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.915366] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.919430] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 2.923428] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020a0
[ 2.927508] usb usb4: configuration #1 chosen from 1 choice
[ 2.931388] hub 4-0:1.0: USB hub found
[ 2.935361] hub 4-0:1.0: 2 ports detected
[ 2.987664] usb 1-1: configuration #1 chosen from 1 choice
[ 2.991767] usb 1-1: New USB device found, idVendor=03f0, idProduct=171d
[ 2.995679] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.999671] usb 1-1: Product: HP Integrated Module
[ 3.003671] usb 1-1: Manufacturer: Broadcom Corp
[ 3.502026] Clocksource tsc unstable (delta = -156435253 ns)
[ 3.027480] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.031401] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.035394] usb usb4: Product: UHCI Host Controller
[ 3.039396] usb usb4: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 3.043393] usb usb4: SerialNumber: 0000:00:1d.1
[ 3.051411] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.059400] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.059406] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.063461] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 3.067438] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000020c0
[ 3.075550] usb usb5: configuration #1 chosen from 1 choice
[ 3.079431] hub 5-0:1.0: USB hub found
[ 3.083404] hub 5-0:1.0: 2 ports detected
[ 3.194227] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.198135] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.202136] usb usb5: Product: UHCI Host Controller
[ 3.206133] usb usb5: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 3.210136] usb usb5: SerialNumber: 0000:00:1d.2
[ 3.763670] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.821243] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.831070] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 3.833944] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.837893] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 3.837899] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.841950] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 3.853775] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.853858] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 3.853870] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0621000
[ 3.873881] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.878039] usb usb6: configuration #1 chosen from 1 choice
[ 3.881897] hub 6-0:1.0: USB hub found
[ 3.885875] hub 6-0:1.0: 4 ports detected
[ 3.993988] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.997860] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.001859] usb usb6: Product: EHCI Host Controller
[ 4.005859] usb usb6: Manufacturer: Linux 2.6.25-rc7-amd64 ehci_hcd
[ 4.009866] usb usb6: SerialNumber: 0000:00:1a.7
[ 4.013910] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 4.017888] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.017894] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.021954] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 4.033342] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.033879] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.033888] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0628000
[ 3.607254] usb 3-2: configuration #1 chosen from 1 choice
[ 3.615143] usb 3-2: can't set config #1, error -71
[ 4.055920] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.056084] usb usb7: configuration #1 chosen from 1 choice
[ 4.056123] hub 7-0:1.0: USB hub found
[ 4.056132] hub 7-0:1.0: 6 ports detected
[ 3.619109] usb 3-2: New USB device found, idVendor=08ff, idProduct=2580
[ 3.623026] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.627025] usb 3-2: Product: Fingerprint Sensor
[ 4.162421] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.166295] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.170295] usb usb7: Product: EHCI Host Controller
[ 4.174295] usb usb7: Manufacturer: Linux 2.6.25-rc7-amd64 ehci_hcd
[ 4.178295] usb usb7: SerialNumber: 0000:00:1d.7
[ 4.182792] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
[ 4.186306] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.190306] ICH8M: not 100% native mode: will probe irqs later
[ 4.194305] ICH8M: IDE port disabled
[ 4.198301] ide0: BM-DMA at 0x20e0-0x20e7, BIOS settings: hda:DMA, hdb:DMA
[ 4.202302] Probing IDE interface ide0...
[ 3.881561] usb 1-1: USB disconnect, address 2
[ 4.130786] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 4.662531] hdb: MATSHITADVD-RAM UJ-842S, ATAPI CD/DVD-ROM drive
[ 4.308545] usb 1-1: configuration #1 chosen from 1 choice
[ 4.311185] usb 1-1: New USB device found, idVendor=03f0, idProduct=171d
[ 4.312555] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.316553] usb 1-1: Product: HP Integrated Module
[ 4.320552] usb 1-1: Manufacturer: Broadcom Corp
[ 5.006232] hda: TOSHIBA MK8009GAH, ATA DISK drive
[ 5.009808] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.009875] hda: UDMA/100 mode selected
[ 5.013854] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.014144] hdb: MWDMA2 mode selected
[ 4.564497] usb 3-2: USB disconnect, address 2
[ 5.018100] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.032577] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929010210]
[ 4.599311] No dock devices found.
[ 4.610772] SCSI subsystem initialized
[ 4.624147] libata version 3.00 loaded.
[ 5.119647] hda: max request size: 128KiB
[ 5.120275] hda: 156301488 sectors (80026 MB), CHS=65535/16/63
[ 5.124426] hda: cache flushes supported
[ 5.128334] hda: hda1 hda2 hda3
[ 4.685600] hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 4.688413] Uniform CD-ROM driver Revision: 3.20
[ 4.807443] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 5.446132] usb 3-2: configuration #1 chosen from 1 choice
[ 5.453185] usb 3-2: New USB device found, idVendor=08ff, idProduct=2580
[ 5.456923] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.460918] usb 3-2: Product: Fingerprint Sensor
[ 5.687875] device-mapper: uevent: version 1.0.3
[ 5.689072] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
[ 77.449099] PM: Starting manual resume from disk
[ 77.216432] kjournald starting. Commit interval 5 seconds
[ 77.599693] EXT3-fs: mounted filesystem with ordered data mode.
[ 81.817874] input: Power Button (FF) as /class/input/input2
[ 81.876808] ACPI: Power Button (FF) [PWRF]
[ 81.880947] input: Sleep Button (CM) as /class/input/input3
[ 81.934673] ACPI: Sleep Button (CM) [C2BF]
[ 81.936839] input: Lid Switch as /class/input/input4
[ 81.970287] ACPI: Lid Switch [C155]
[ 81.973476] ACPI: AC Adapter [C23B] (on-line)
[ 82.137608] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
[ 82.140790] e1000e: Copyright (c) 1999-2007 Intel Corporation.
[ 82.144822] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 82.148768] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 82.000153] ACPI: Battery Slot [C23D] (battery present)
[ 82.365653] eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:68:06:12:ee
[ 82.365657] eth0: Intel(R) PRO/1000 Network Connection
[ 82.365696] eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
[ 82.365775] agpgart: Detected an Intel 965GM Chipset.
[ 82.001910] ACPI: WMI: Mapper loaded
[ 82.403700] agpgart: Detected 7676K stolen memory.
[ 82.424832] agpgart: AGP aperture is 256M @ 0xd0000000
[ 82.707289] ACPI: device:02 is registered as cooling_device9
[ 82.710253] input: Video Bus as /class/input/input5
[ 82.784809] ACPI: Video Device [C09A] (multi-head: yes rom: no post: no)
[ 82.697069] Bluetooth: Core ver 2.11
[ 82.744260] NET: Registered protocol family 31
[ 82.745456] Bluetooth: HCI device and connection manager initialized
[ 82.749397] Bluetooth: HCI socket layer initialized
[ 83.245523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 83.248928] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
[ 83.252890] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 82.887798] input: PC Speaker as /class/input/input6
[ 83.486815] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c9]
[ 83.595018] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 83.595025] ricoh-mmc: Copyright(c) Philip Langdale
[ 83.608017] Bluetooth: HCI USB driver ver 2.9
[ 83.612151] Yenta: ISA IRQ mask 0x04b8, PCI irq 18
[ 83.615053] Socket status: 30000006
[ 83.619041] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 83.239173] usbcore: registered new interface driver hci_usb
[ 83.623042] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 83.627028] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff
[ 83.631027] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 83.635396] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.3 [1180:0843] (rev 11)
[ 83.639049] ricoh-mmc: Controller is now disabled.
[ 83.807538] sdhci: Secure Digital Host Controller Interface driver
[ 83.810237] sdhci: Copyright(c) Pierre Ossman
[ 83.814275] sdhci: SDHCI controller found at 0000:02:06.2 [1180:0822] (rev 21)
[ 83.818247] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 20 (level, low) -> IRQ 20
[ 83.822258] sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 83.830231] mmc0: SDHCI at 0xe0102000 irq 20 DMA
[ 83.561362] pnp: the driver 'tpm_inf_pnp' has been registered
[ 83.561745] tpm_inf_pnp 00:02: Found C284 with ID IFX0102
[ 83.565798] tpm_inf_pnp 00:02: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 83.570037] tpm_inf_pnp 00:02: driver attached
[ 84.051552] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks
[ 84.054282] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 84.058376] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 84.062287] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 84.066299] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 84.118656] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 84.123101] phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 84.339785] ACPI: PCI interrupt for device 0000:10:00.0 disabled
[ 84.164081] input: PS/2 Generic Mouse as /class/input/input7
[ 84.220160] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 84.224143] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 84.805893] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 84.844060] input: SynPS/2 Synaptics TouchPad as /class/input/input8
[ 86.605978] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x006ba000
[ 87.270261] EXT3 FS on dm-1, internal journal
[ 88.670658] loop: module loaded
[ 88.786193] tun: Universal TUN/TAP device driver, 1.6
[ 88.786406] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 91.314501] kjournald starting. Commit interval 5 seconds
[ 91.317416] EXT3 FS on hda1, internal journal
[ 91.321095] EXT3-fs: mounted filesystem with ordered data mode.
[ 91.362657] kjournald starting. Commit interval 5 seconds
[ 91.364863] EXT3 FS on dm-3, internal journal
[ 91.368449] EXT3-fs: mounted filesystem with ordered data mode.
[ 91.071837] Adding 1048568k swap on /dev/mapper/lucky-swap. Priority:-1 extents:1 across:1048568k
[ 92.858817] Bridge firewalling registered
[ 93.215772] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 92.876596] device eth0 entered promiscuous mode
[ 94.897320] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 94.900894] eth0: 10/100 speed: disabling TSO
[ 94.905430] br0: port 1(eth0) entering learning state
[ 103.880556] br0: topology change detected, propagating
[ 103.884547] br0: port 1(eth0) entering forwarding state
[ 105.552042] NET: Registered protocol family 10
[ 105.555411] lo: Disabled Privacy Extensions
[ 112.922474] pnp: the driver 'parport_pc' has been registered
[ 112.664432] lp: driver loaded but no devices found
[ 112.778585] ppdev: user-space parallel port driver
[ 115.797086] eth0: no IPv6 routers present
[ 116.287256] br0: no IPv6 routers present
[ 119.053997] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 121.707099] Bluetooth: L2CAP ver 2.9
[ 121.710270] Bluetooth: L2CAP socket layer initialized
[ 121.850732] Bluetooth: RFCOMM socket layer initialized
[ 121.854078] Bluetooth: RFCOMM TTY layer initialized
[ 121.858023] Bluetooth: RFCOMM ver 1.8
[ 122.418172] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 122.419231] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006)
[ 122.417622] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 122.417898] iwl4965: Could not read microcode: -2
[ 122.425981] ACPI: PCI interrupt for device 0000:10:00.0 disabled
[ 125.489416] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 125.493348] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006)
[ 125.509783] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 125.513236] iwl4965: Could not read microcode: -2
[ 125.517315] ACPI: PCI interrupt for device 0000:10:00.0 disabled
[ 126.367749] hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[ 126.369671] hdb: task_no_data_intr: error=0x04 { AbortedCommand }
[ 126.369671] ide: failed opcode was: 0xef
[ 130.641477] [drm] Initialized drm 1.1.0 20060810
[ 130.666634] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 130.666652] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 130.666902] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 142.804354] eth0: no IPv6 routers present
[ 147.382170] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 147.382286] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006)
[ 147.393959] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 147.393971] iwl4965: Could not read microcode: -2
CPU0 CPU1
0: 22082 23036 IO-APIC-edge timer
1: 23 12 IO-APIC-edge i8042
8: 0 1 IO-APIC-edge rtc
9: 116 119 IO-APIC-fasteoi acpi
12: 129 114 IO-APIC-edge i8042
14: 5053 4013 IO-APIC-edge ide0
16: 15965 7536 IO-APIC-fasteoi uhci_hcd:usb1, i915@pci:0000:00:02.0
17: 60 63 IO-APIC-fasteoi uhci_hcd:usb2, HDA Intel
18: 0 2 IO-APIC-fasteoi uhci_hcd:usb5, ehci_hcd:usb6, yenta
19: 11425 19979 IO-APIC-fasteoi ohci1394
20: 25 20 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb7, sdhc0:slot0
22: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
1277: 574 516 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 8375 13897 Local timer interrupts
RES: 4901 4903 Rescheduling interrupts
CAL: 189 18289 function call interrupts
TLB: 503 588 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
SPU: 0 0 Spurious interrupts
ERR: 0
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1277
Region 0: Memory at e0600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e0620000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 2020 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0300c Data: 4191
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 2040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 2060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e0621000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e0624000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: fee0300c Data: 4169
Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device 0000
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e0000000-e00fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: fee0300c Data: 4171
Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 30c9
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 2080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 20a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 20c0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e0628000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0100000-e03fffff
Prefetchable memory behind bridge: 0000000088000000-000000008bffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 30c9
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 20e0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ide-pci-generic, piix, ata_generic
02:06.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:06.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at e0101000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: ohci1394
Kernel modules: ohci1394
02:06.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
Subsystem: Hewlett-Packard Company Unknown device 30c9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 20
Region 0: Memory at e0102000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci
Kernel modules: sdhci
02:06.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
Subsystem: Intel Corporation Unknown device 1001
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 00000000fee0300c Data: 41d9
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: iwl4965
Kernel modules: iwl4965