Re: regression caused by: genirq: do not leave interupts enabled on free_irq

[Yinghai Lu]

On Tue, Apr 15, 2008 at 12:44 AM, Andrew Morton
<akpm@xxxxxxxxxxxxxxxxxxxx> wrote:
>
> On Fri, 11 Apr 2008 12:48:43 -0700 "Yinghai Lu" <yhlu.kernel@xxxxxxxxx> wrote:
>
>  > On Fri, Apr 11, 2008 at 11:22 AM, Yinghai Lu <yhlu.kernel@xxxxxxxxx> wrote:
>  > > On Fri, Apr 11, 2008 at 12:30 AM, Eric W. Biederman
>  > >  <ebiederm@xxxxxxxxxxxx> wrote:
>  > >  >
>  > >  >
>  > >
>  > >
>  > > >  On Fri, 2008-04-11 at 00:17 -0700, Yinghai Lu wrote:
>  > >  >  > On Fri, Apr 11, 2008 at 12:14 AM, Yinghai Lu <yhlu.kernel@xxxxxxxxx> wrote:
>  > >  >  > > On Fri, Apr 11, 2008 at 12:01 AM, Thomas Gleixner <tglx@xxxxxxxxxxxxx> wrote:
>  > >  >  > >  > On Thu, 10 Apr 2008, Yinghai Lu wrote:
>  > >  >  > >  >  > last week found:
>  > >  >  > >  >  > after latest kernel kexec RHEL 5.1 or other stack kernel, the nvidia
>  > >  >  > >  >  > forcedeth doesn't work anymore.
>  > >  >  > >  >  >
>  > >  >  > >  >  > I stared at forcedeth.c two days. and revert every patches about that
>  > >  >  > >  >  > doesn't help.
>  > >  >  > >  >
>  > >  >  > >  >  So forcedeth does not come up again, when you kexec from linus.git
>  > >  >  > >  >  into an older distro kernel. Or is it the other way round ?
>  > >  >  > >  RHEL 5.1 kexec RHEL 5.1 : works
>  > >  >  > >  RHEL 5.1 kexec linus kernel: works
>  > >  >  > >  linus (after -rc2) kexec linus tree: works:
>  > >  >  > >  linus  (after -rc2) kexec RHEL 5.1 : forcedeth will not come up
>  > >  >  > >  linus ( before -rc2 include rc2) kexec RHEL 5.1 works
>  > >  >  > >
>  > >  >  > the forcedeth can not get IP address...
>  > >  >
>  > >  >  Sounds like you are not getting any interrupts when you receive a
>  > >  >  packet.  (i.e. The interrupt line is staying disabled).
>  > >  >
>  > >  >  Is MSI an option here?  I'm wondering if we disable the MSI and
>  > >  >  something is not enabling it.
>  > >
>  > >
>  > >
>  > >  after
>  > >  setpci -s 0x00:08.0 0x60.b=0xfe
>  > >
>  > >  the eth0 can get ip address with ifup eth0.
>  >
>  > it is RHEL 5.1 problem...with msi.
>  >
>  > somehow msi entry msi_attrib_maskbit=is_mask_bit_support always get
>  > 0...., and use msi_irq_wo_maskbit_type instead of
>  > msi_irq_w_maskbit_type
>  >
>  > so when load that directly without kexec
>  > that 0x60 always to 0x00.
>  >
>  > and this time kernel after 2.6.25-rc2 ( not included) really shutdown
>  > the msi with 0xff the all maskbit...
>  >
>
>  So... where did this end up?   It's a post-2.6.24 regression, isn't it?

between 2.6.25-rc2 and 2.6.25-rc3 by one patch from Thomas regarding
genirq to solve one long standing spurious problem...
looks like the irq is ioapic or pic, right?

YH
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/