Re: Voyager phys_cpu_present_map compile error

[James Bottomley]

On Mon, 2008-04-21 at 14:00 +0200, Ingo Molnar wrote:
> * Adrian Bunk <bunk@xxxxxxxxxx> wrote:
> 
> > I shouldn't send bug reports at 3 in the morning...
> > 
> > Attached is the .config for both Voyager build errors I reported.
> 
> thanks, the three patches below should fix it.
> 
> i ended up excluding Voyager configs from our test space some time ago 
> (and VISWS as well - there's one more visws fix in x86.git), that's how 
> this broke. These subarchitectures seem not to be used at all and the 
> code wont boot on normal PCs. We could mark it BROKEN but the fix seems 
> simple in any case.

The voyager pieces of this code look fine to me.  I can't test at the
moment because we're having the carpets cleaned and I can't get down
into the cellar where the systems are, but I'll do so shortly.

James


> 	Ingo
> 
> ---------------------->
> Subject: x86: voyager fix
> From: Ingo Molnar <mingo@xxxxxxx>
> Date: Mon Apr 21 13:39:53 CEST 2008
> 
> Reported-by: Adrian Bunk <bunk@xxxxxxxxxx>
> Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
> ---
>  arch/x86/Kconfig                    |    2 +-
>  arch/x86/kernel/setup.c             |    2 ++
>  arch/x86/mach-voyager/voyager_smp.c |   17 -----------------
>  3 files changed, 3 insertions(+), 18 deletions(-)
> 
> Index: linux-x86.q/arch/x86/Kconfig
> ===================================================================
> --- linux-x86.q.orig/arch/x86/Kconfig
> +++ linux-x86.q/arch/x86/Kconfig
> @@ -23,7 +23,7 @@ config X86
>  	select HAVE_KPROBES
>  	select HAVE_KRETPROBES
>  	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
> -	select HAVE_ARCH_KGDB
> +	select HAVE_ARCH_KGDB if !X86_VOYAGER
>  
> 
>  config GENERIC_LOCKBREAK
> Index: linux-x86.q/arch/x86/kernel/setup.c
> ===================================================================
> --- linux-x86.q.orig/arch/x86/kernel/setup.c
> +++ linux-x86.q/arch/x86/kernel/setup.c
> @@ -21,8 +21,10 @@ EXPORT_SYMBOL(boot_cpu_physical_apicid);
>  DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
>  EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
>  
> +#ifndef CONFIG_X86_VOYAGER
>  /* Bitmask of physically existing CPUs */
>  physid_mask_t phys_cpu_present_map;
> +#endif
>  
>  #if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_SMP)
>  /*
> Index: linux-x86.q/arch/x86/mach-voyager/voyager_smp.c
> ===================================================================
> --- linux-x86.q.orig/arch/x86/mach-voyager/voyager_smp.c
> +++ linux-x86.q/arch/x86/mach-voyager/voyager_smp.c
> @@ -208,11 +208,6 @@ static struct irq_chip vic_chip = {
>  /* used to count up as CPUs are brought on line (starts at 0) */
>  static int cpucount = 0;
>  
> -/* steal a page from the bottom of memory for the trampoline and
> - * squirrel its address away here.  This will be in kernel virtual
> - * space */
> -unsigned char *trampoline_base;
> -
>  /* The per cpu profile stuff - used in smp_local_timer_interrupt */
>  static DEFINE_PER_CPU(int, prof_multiplier) = 1;
>  static DEFINE_PER_CPU(int, prof_old_multiplier) = 1;
> @@ -429,18 +424,6 @@ void __init smp_store_cpu_info(int id)
>  	identify_secondary_cpu(c);
>  }
>  
> -/* set up the trampoline and return the physical address of the code */
> -unsigned long __init setup_trampoline(void)
> -{
> -	/* these two are global symbols in trampoline.S */
> -	extern const __u8 trampoline_end[];
> -	extern const __u8 trampoline_data[];
> -
> -	memcpy(trampoline_base, trampoline_data,
> -	       trampoline_end - trampoline_data);
> -	return virt_to_phys(trampoline_base);
> -}
> -
>  /* Routine initially called when a non-boot CPU is brought online */
>  static void __init start_secondary(void *unused)
>  {
> 
> Subject: x86: Drop duplicate from setup.c
> From: Alexey Starikovskiy <astarikovskiy@xxxxxxx>
> Date: Mon, 21 Apr 2008 13:31:55 +0400
> 
> Signed-off-by: Alexey Starikovskiy <astarikovskiy@xxxxxxx>
> Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
> ---
>  arch/x86/kernel/setup.c |    2 --
>  1 file changed, 2 deletions(-)
> 
> Index: linux-x86.q/arch/x86/kernel/setup.c
> ===================================================================
> --- linux-x86.q.orig/arch/x86/kernel/setup.c
> +++ linux-x86.q/arch/x86/kernel/setup.c
> @@ -18,8 +18,6 @@ unsigned disabled_cpus __cpuinitdata;
>  unsigned int boot_cpu_physical_apicid = -1U;
>  EXPORT_SYMBOL(boot_cpu_physical_apicid);
>  
> -physid_mask_t phys_cpu_present_map;
> -
>  DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
>  EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
>  
> Subject: x86: fix compilation error in VisWS
> From: Alexey Starikovskiy <astarikovskiy@xxxxxxx>
> Date: Mon, 21 Apr 2008 13:32:01 +0400
> 
> Signed-off-by: Alexey Starikovskiy <astarikovskiy@xxxxxxx>
> Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
> ---
>  arch/x86/mach-visws/mpparse.c |   15 +--------------
>  1 file changed, 1 insertion(+), 14 deletions(-)
> 
> Index: linux-x86.q/arch/x86/mach-visws/mpparse.c
> ===================================================================
> --- linux-x86.q.orig/arch/x86/mach-visws/mpparse.c
> +++ linux-x86.q/arch/x86/mach-visws/mpparse.c
> @@ -11,22 +11,9 @@
>  /* Have we found an MP table */
>  int smp_found_config;
>  
> -/*
> - * Various Linux-internal data structures created from the
> - * MP-table.
> - */
> -int apic_version [MAX_APICS];
> -
>  int pic_mode;
> -unsigned long mp_lapic_addr;
> -
> -/* Processor that is doing the boot up */
> -unsigned int boot_cpu_physical_apicid = -1U;
> -
> -/* Bitmask of physically existing CPUs */
> -physid_mask_t phys_cpu_present_map;
>  
> -unsigned int __initdata maxcpus = NR_CPUS;
> +extern unsigned int __cpuinitdata maxcpus;
>  
>  /*
>   * The Visual Workstation is Intel MP compliant in the hardware

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/