Re: Disk geometry from /sys

[Francis Moreau]

On Fri, Apr 18, 2008 at 3:37 PM, Seewer Philippe <philippe.seewer@xxxxxx> wrote:
>
>  Mark Lord wrote:
>
> > That can sound a bit misleading.  The complete story, for ATA/SATA drives,
> > is that the disk has two geometries:  an internal physical one, with a
> fixed number of heads and cylinders, but variable sectors/track
> > (which normally varies by cylinder zone).
> >
> > Software *never* sees or knows about that geometry, so ignore it.
> >
> > The second geometry, is the one that the drive reports to software
> > as its "native" geometry.  This is what you see from "hdparm -I"
> > and friends, and this geometry is what has to be used by software
> > when using cylinder/head/sector (CHS) addressing for I/O operations.
> > The hardware interface has a limit of 4-bits for the head value,
> > so the maximum number of heads can never be more than 16.
> >
> > Nobody uses CHS addressing for I/O operations, at least not on
> > any hardware newer than at least ten years old, so this geometry
> > is also unimportant for most uses.
> >
> > That's what the drive knows about.
> >
> > Software, for compatibility with the MS-DOS partition table scheme,
> > sometimes uses a "logical" geometry, where we "pretend" that a drive
> > can have up to 255 heads, which then allows more of the disk to be
> > described within the limitations of the partition table data layout.
> > That's where one frequently sees "255 heads", even though the drive
> > underneath uses 16 at the interface level, and probably as only 2
> > or 4 real heads inside the shell.
> >
>
>  Aye. Though I prefer the term virtual geometry. But thats cosmetics. Sorry
> for beeing unclear, and many thanks for untangling my post.
>
>  If anyones interested in even more Details about C/H/S adressing and so on,
> there's a very good document about that to be found here:
>  http://www.mossywell.com/boot-sequence/
>

unfortunately this link doesn't work for now...

-- 
Francis
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/