Re: [PATCH] pci_try_set_mwi() in sata_promise

[Grant Grundler]

On Wed, Apr 23, 2008 at 6:33 AM, Marin Mitov <mitov@xxxxxxxxxxx> wrote:
...
>  > 2. What improvement does that pci_try_set_mwi() cause? Speed? Fewer errors?
>
>  May be speed, but practically hardly observable.

I expect the difference to be in available memory BW.
MWI (Memory Write Invalidate) allows the IO controller to write
partial cachlines without having to do a read/modify/write sequence.
R/W/M means the cacheline has to cross the memory bus twice.
The difference in performance will depend on how often the
Promise SATA controller was doing partial cachline
transactions with the wrong cacheline size.

This should be measurable if you run a memory test at the same time
as you stress the SATA controller with fio. Re-read the same 128KB block
repeatedly from the Promise controller (I'm expecting that to be cached)
and measure the available memory BW (e.g. see lmbench for a memtest).
Repeat with MWI enabled.


>  > 3. Why call pci_try_set_mwi()? Can't you set the cache line size directly?
>
>  pci_set_cacheline_size() is NOT exported, while pci_try_set_mwi() IS and
> sets (as a side effect) the cache line size.

Setting the cachline size only makes sense if MWI is enabled.
Drivers should not longer directly set the cacheline size since it might
not be what they think it is.

hth,
grant
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/