Re: iTCO watchdog timer

[Stephen Clark]

Stephen Clark wrote:
> Wim Van Sebroeck wrote:
> > Hi Steve,
> >
> > > [root@joker20 ~]# ./testwdog
> > > The GETSUPPORT call reported (-1):
> > >   options         : ?
> > >   firmware_version: ?
> > >   identity        : ?
> > > The GETSTATUS call reported 0 (0)
> > > The GETBOOTSTATUS call reported 0 (0)
> > > The GETTEMP call reported 0°F = -17°C (ret=-1)
> > > The SETOPTIONS (DISABLECARD) call returned=0
> > > The SETOPTIONS (ENABLECARD) call returned=0
> > > The timeout is 30 seconds (0)
> > > The timeout is now set to 34 seconds (0)
> > > The timeout is 34 seconds (0)
> > > The GETTIMELEFT call reported 33 seconds (0x0021) (0)
> > > The GETTIMELEFT call reported 19 seconds (0x0013) (0)
> > > The GETTIMELEFT call reported 20 seconds (0x0014) (0)
> > > The GETTIMELEFT call reported 21 seconds (0x0015) (0)
> > > The GETTIMELEFT call reported 22 seconds (0x0016) (0)
> > > The GETTIMELEFT call reported 22 seconds (0x0016) (0)
> >
> > So the timer counts down. So I have to find out why it doesn't reboot.
> > And it has to do only with the ICH9 chipsets. I'll adapt the iTCO_wdt
> > driver so that we have extra debugging info and will sent it to you.
> >
> > Greetings,
> > Wim.
> Thanks,
>
> I'll be waiting patiently.
>
> Regards,
> Steve
Hi Wim,

Still waiting.

Regards,
Steve
--

"They that give up essential liberty to obtain temporary safety,
deserve neither liberty nor safety."  (Ben Franklin)

"The course of history shows that as a government grows, liberty
decreases."  (Thomas Jefferson)


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/