Re: [RFC][PATCH 2/4] RTC: SWARM I2C board initialization

[Jean Delvare]

Hi Maciej,

On Wed, 7 May 2008 01:40:27 +0100 (BST), Maciej W. Rozycki wrote:
> (...)
> 2. The i2c-sibyte.c BCM1250A SMBus controller driver now registers its 
>    buses as numbered so that board setup is correctly applied.  Plus minor 
>    corrections.

Minor corrections which would ideally belong to a separate patch
(there's a whole lot more cleanups that could be done in that driver,
BTW...)

> (...)
> --- linux-2.6.26-rc1-20080505.macro/drivers/i2c/busses/i2c-sibyte.c	2008-05-05 02:55:25.000000000 +0000
> +++ linux-2.6.26-rc1-20080505/drivers/i2c/busses/i2c-sibyte.c	2008-05-06 23:45:32.000000000 +0000
> @@ -2,6 +2,7 @@
>   * Copyright (C) 2004 Steven J. Hill
>   * Copyright (C) 2001,2002,2003 Broadcom Corporation
>   * Copyright (C) 1995-2000 Simon G. Vogl
> + * Copyright (C) 2008  Maciej W. Rozycki

I don't think that the minor changes below are enough for you to claim
copyright on that driver.

>   *
>   * This program is free software; you can redistribute it and/or
>   * modify it under the terms of the GNU General Public License
> @@ -132,18 +133,18 @@ static const struct i2c_algorithm i2c_si
>  /*
>   * registering functions to load algorithms at runtime
>   */
> -int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
> +static int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
>  {
>  	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
>  
> -	/* register new adapter to i2c module... */
> +	/* Register new adapter to i2c module...  */
>  	i2c_adap->algo = &i2c_sibyte_algo;
>  
> -	/* Set the frequency to 100 kHz */
> +	/* Set the requested frequency.  */

Why do you double the space and the end of comments? Never seen that
before, and I can't see the idea.

>  	csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
>  	csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
>  
> -	return i2c_add_adapter(i2c_adap);
> +	return i2c_add_numbered_adapter(i2c_adap);
>  }
>  
>  
> @@ -159,6 +160,7 @@ static struct i2c_adapter sibyte_board_a
>  		.class		= I2C_CLASS_HWMON,
>  		.algo		= NULL,
>  		.algo_data	= &sibyte_board_data[0],
> +		.nr		= 0,
>  		.name		= "SiByte SMBus 0",
>  	},
>  	{
> @@ -167,6 +169,7 @@ static struct i2c_adapter sibyte_board_a
>  		.class		= I2C_CLASS_HWMON,
>  		.algo		= NULL,
>  		.algo_data	= &sibyte_board_data[1],
> +		.nr		= 1,
>  		.name		= "SiByte SMBus 1",
>  	},
>  };

I'm not sure how you intend to push these changes upstream. I would
take a patch only touching drivers/i2c/busses/i2c-sibyte.c in my i2c
tree, however a patch also touching arch code, must be handled be the
maintainer for that architecture or platform.

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/