Re: BIOS bug, APIC version if 0 for CPU#0

[Justin Mattock]

On Wed, May 7, 2008 at 9:47 PM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> On Wednesday, 7 of May 2008, Gabriel C wrote:
>  > Rafael J. Wysocki wrote:
>  > > On Tuesday, 22 of April 2008, Justin Mattock wrote:
>  > >> On Tue, Apr 22, 2008 at 1:49 PM, Kasper Sandberg <lkml@xxxxxxxxxxx> wrote:
>  > >>> On Tue, 2008-04-22 at 06:10 +0000, Justin Mattock wrote:
>  > >>>  > On Tue, Apr 22, 2008 at 5:21 AM, Jacek Luczak <difrost.kernel@xxxxxxxxx> wrote:
>  > >>>  > > Hi,
>  > >>>  > >
>  > >>>  > >
>  > >>>  > >  > Hello;
>  > >>>  > >  > with the latest git on a macbook the system can barely boot without
>  > >>>  > >  > freezing, a work around for me at leat is either disable smp, or once
>  > >>>  > >  > booted  turn on glxgears,or compiling the kernel i.g. when using the
>  > >>>  > >  > processors I'm not receiving a freeze, only when everything starts
>  > >>>  > >  > lowering down. in dmesg I'm noticing BIOS bug, APIC version is 0 for
>  > >>>  > >  > CPU#0! fixing up to 0x10. (tell you're hw vendor) could this be the
>  > >>>  > >  > reason for the system freezes?,
>  > >>>  > >
>  > >>>  > >  I don't think so. On my machine there's no freezes with latest git and:
>  > >>>  > >  ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>  > >>>  > >  BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
>  > >>>  > >  ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>  > >>>  > >  BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
>  > >>>  > >
>  > >>>  > >  I've got exactly the same messages.
>  > >>>  >
>  > >>>  > Are you using a macbook aswell?
>  > >>>  >
>  > >>>  > >
>  > >>>  > >
>  > >>>  > >  > also I didnt have a camera handy on me
>  > >>>  > >  > but the screen spit out = Bug spinlock lockup on CPU#0
>  > >>>  > >  > swapper/0. c17fa7c0 PID 0, comm: swapper not tainted.
>  > >>>  > >
>  > >>>  > >  Can you try to write down more of those bug messages?
>  > >>>  >
>  > >>>  > Yeah,
>  > >>>  >
>  > >>>  > >
>  > >>>  > >
>  > >>>  > >  > I dont have a problem disabling smp, except when I cat /proc/cpuinfo I
>  > >>>  > >  > don't see anything about my cores.
>  > >>>  > >
>  > >>>  > >  What exactly you expect to see in /proc/cpuinfp while smp is disabled?
>  > >>>  >
>  > >>>  > under smp I see cpu cores. disabling smp I dont see cpu cores, under
>  > >>>  > cat /proc/cpuinfo.
>  > >>>
>  > >>>  well.. SMP is kindof support for multiple processors, be it in one
>  > >>>  socket, or multiple sockets.. without SMP you will only be able to use 1
>  > >>>  of your X cores.
>  > >> Yeah disabling smp is not a good idea on a macbook pro, performace is horrible.
>  > >>
>  > >>>  >
>  > >>>  >
>  > >>>  > >
>  > >>>  > >
>  > >>>  > >  > I know this is a stupid question
>  > >>>  > >  > but will it hurt the system if smp is disabled
>  > >>>  > >  > for the macbook pro ati chipset.?
>  > >>>  > >
>  > >>>  > >  No it won't.
>  > >>>  > >
>  > >>>  > >  -Jacek
>  > >>>  > >
>  > >>>  >
>  > >>>  > Cool as long as the system Is o.k. disabling smp.
>  > >>>  It is.. but with the limitations outlined above.
>  > >>>  >   What about x86: PAT
>  > >>>  > support is disabled. how do I enable this option?
>  > >>>  > regards;
>  > >>>  >
>  > >>>
>  > >>>
>  > >> Thanks for the feedback, well I guess this would be either a
>  > >> regression or a bug. I think the best would be to have somebody else
>  > >> with a macbook pro 15' ati chipset confirm this freezeing as well,
>  > >> before going out and jumping the gun, and filing a bug report.
>  > >> regards;
>  > >
>  > > What's the current status of this issue?
>  >
>  > I reported this issue too but got ignored .. No one of the x86 maintainer did answer my questions.
>  >
>  > http://www.ussg.iu.edu/hypermail/linux/kernel/0805.0/1258.html
>  >
>  > However it does not do any bad on my boxes ( so far I can tell ) is just plain annoying and wrong some who since
>  > is *only* occurs on 32bit kernels. HW is broken or even isn't.
>  >
>  > It seems to me this issue is related to the move of generic_processor_info() and fiends to apic_32.c ( but I'm not really sure ) ,
>  > all I'm sure about this message was not in 2.6.25 nor in 2.6.24.
>
>  It will be listed as http://bugzilla.kernel.org/show_bug.cgi?id=10613.
>
>  Please add yourself to the Cc list in there.
>
>  Thanks,
>  Rafael
>

Cool, thanks for informing me. As of now I've decided to revert to
2.6.25-rc9 due to it running smoothly on a macbook pro,
and everything working. I'll try a go at a later kernel, whenever ATI
decides to add support for fault.
regards;

-- 
Justin P. Mattock
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/