Re: [PATCH] [POWERPC] Add i2c pins to dts and board setup

[Scott Wood]

Jochen Friedrich wrote:
> Initialize I2C pins on boards with CPM1/CPM2 controllers.
>
> Signed-off-by: Jochen Friedrich <jochen@xxxxxxxx>
> ---
>  arch/powerpc/boot/dts/mpc8272ads.dts         |   10 ++++++++++
>  arch/powerpc/boot/dts/mpc866ads.dts          |   10 ++++++++++
>  arch/powerpc/boot/dts/mpc885ads.dts          |   10 ++++++++++
>  arch/powerpc/platforms/82xx/mpc8272_ads.c    |    4 ++++
>  arch/powerpc/platforms/8xx/mpc86xads_setup.c |    4 ++++
>  arch/powerpc/platforms/8xx/mpc885ads_setup.c |    3 +++
>  6 files changed, 41 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
> index 46e2da3..57abcc1 100644
> --- a/arch/powerpc/boot/dts/mpc8272ads.dts
> +++ b/arch/powerpc/boot/dts/mpc8272ads.dts
> @@ -217,6 +217,16 @@
>  				linux,network-index = <1>;
>  				fsl,cpm-command = <0x16200300>;
>  			};
> +
> +			i2c@11860 {
> +				compatible = "fsl,mpc8272-i2c",
> +					     "fsl,cpm2-i2c",
> +					     "fsl,cpm-i2c";
> +				reg = <11860 20 8afc 2>;
> +				interrupts = <1 8>;
> +				interrupt-parent = <&PIC>;
> +				fsl,cpm-command = <29600000>;
> +			};
>  		};
>  
>  		PIC: interrupt-controller@10c00 {
> diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
> index 765e43c..84c190e 100644
> --- a/arch/powerpc/boot/dts/mpc866ads.dts
> +++ b/arch/powerpc/boot/dts/mpc866ads.dts
> @@ -171,6 +171,16 @@
>  				fsl,cpm-command = <0000>;
>  				linux,network-index = <1>;
>  			};
> +
> +			i2c@860 {
> +				compatible = "fsl,mpc866-i2c",
> +					     "fsl,cpm1-i2c",
> +					     "fsl,cpm-i2c";
> +				reg = <860 20 3c80 30>;
> +				interrupts = <10>;
> +				interrupt-parent = <&CPM_PIC>;
> +				fsl,cpm-command = <0010>;
> +			};
>  		};
>  	};
>  
> diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
> index 9895043..67d0e8d 100644
> --- a/arch/powerpc/boot/dts/mpc885ads.dts
> +++ b/arch/powerpc/boot/dts/mpc885ads.dts
> @@ -215,6 +215,16 @@
>  				fsl,cpm-command = <0x80>;
>  				linux,network-index = <2>;
>  			};
> +
> +			i2c@860 {
> +				compatible = "fsl,mpc885-i2c",
> +					     "fsl,cpm1-i2c",
> +					     "fsl,cpm-i2c";
> +				reg = <860 20 3c80 30>;
> +				interrupts = <10>;
> +				interrupt-parent = <&CPM_PIC>;
> +				fsl,cpm-command = <0010>;
> +			};
>  		};
>  	};
>  

These are v1 dts files -- you need an 0x  prefix on the hex numbers.

-Scott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/