[patch 21/37] ata_piix: verify SIDPR access before enabling it

[Greg KH]

2.6.25-stable review patch.  If anyone has any objections, please let us
know.

------------------
From: Tejun Heo <htejun@xxxxxxxxx>

commit cb6716c879ecf49e2af344926c6a476821812061 upstream

On certain configurations (certain macbooks), even though all the
conditions for SIDPR access described in the datasheet are met,
actually reading those registers just returns 0 and have no effect on
write.  Verify SIDPR is actually working before enabling it.

This is reported by Ryan Roth in bz#10512.

Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
Cc: Ryan Roth <ryan.roth@xxxxxxxx>
Signed-off-by: Jeff Garzik <jgarzik@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
 drivers/ata/ata_piix.c |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1531,6 +1531,8 @@ static void __devinit piix_init_sidpr(st
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
 	struct piix_host_priv *hpriv = host->private_data;
+	struct ata_device *dev0 = &host->ports[0]->link.device[0];
+	u32 scontrol;
 	int i;
 
 	/* check for availability */
@@ -1549,6 +1551,29 @@ static void __devinit piix_init_sidpr(st
 		return;
 
 	hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR];
+
+	/* SCR access via SIDPR doesn't work on some configurations.
+	 * Give it a test drive by inhibiting power save modes which
+	 * we'll do anyway.
+	 */
+	scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+
+	/* if IPM is already 3, SCR access is probably working.  Don't
+	 * un-inhibit power save modes as BIOS might have inhibited
+	 * them for a reason.
+	 */
+	if ((scontrol & 0xf00) != 0x300) {
+		scontrol |= 0x300;
+		piix_sidpr_write(dev0, SCR_CONTROL, scontrol);
+		scontrol = piix_sidpr_read(dev0, SCR_CONTROL);
+
+		if ((scontrol & 0xf00) != 0x300) {
+			dev_printk(KERN_INFO, host->dev, "SCR access via "
+				   "SIDPR is available but doesn't work\n");
+			return;
+		}
+	}
+
 	host->ports[0]->ops = &piix_sidpr_sata_ops;
 	host->ports[1]->ops = &piix_sidpr_sata_ops;
 }

-- 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/