[PATCH] au1xmmc: SDIO IRQ support
From: Manuel Lauss
Date: Sat May 17 2008 - 11:58:52 EST
Wire up the SD controllers' SDIO IRQ capability.
Signed-off-by: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/au1xmmc.c | 16 +++++++++++++++-
1 files changed, 15 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 234f324..b3270b1 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -743,6 +743,9 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
if (!(status & SD_STATUS_I))
return IRQ_NONE; /* not ours */
+ if (status & SD_STATUS_SI) /* SDIO */
+ mmc_signal_sdio_irq(host->mmc);
+
if (host->mrq && (status & STATUS_TIMEOUT)) {
if (status & SD_STATUS_RAT)
host->mrq->cmd->error = -ETIMEDOUT;
@@ -855,10 +858,21 @@ static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host)
}
#endif
+static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
+{
+ struct au1xmmc_host *host = mmc_priv(mmc);
+
+ if (en)
+ IRQ_ON(host, SD_CONFIG_SI);
+ else
+ IRQ_OFF(host, SD_CONFIG_SI);
+}
+
static const struct mmc_host_ops au1xmmc_ops = {
.request = au1xmmc_request,
.set_ios = au1xmmc_set_ios,
.get_ro = au1xmmc_card_readonly,
+ .enable_sdio_irq = au1xmmc_enable_sdio_irq,
};
static void au1xmmc_poll_event(unsigned long arg)
@@ -957,7 +971,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
mmc->max_blk_count = 512;
mmc->ocr_avail = AU1XMMC_OCR;
- mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
host->status = HOST_S_IDLE;
--
1.5.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/