[PATCH] smc-ultra: get rid of "eth%d" message

From: NÃmeth MÃrton
Date: Tue May 20 2008 - 18:13:22 EST


Print out the dev->name only after register_netdev(). If the
dev->name is printk()ed out before calling register_netdev()
the result will be "eth%d" in the dmesg instead of "eth0".

Signed-off-by: MÃrton NÃmeth <nm127@xxxxxxxxxxx>

---
--- linux-2.6.26-rc3/drivers/net/smc-ultra.c.orig 2008-04-17 04:49:44.000000000 +0200
+++ linux-2.6.26-rc3/drivers/net/smc-ultra.c 2008-05-20 22:04:15.000000000 +0200
@@ -228,9 +228,6 @@ static int __init ultra_probe1(struct ne
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inb(ioaddr + 8 + i);

- printk("%s: %s at %#3x, %s", dev->name, model_name,
- ioaddr, print_mac(mac, dev->dev_addr));
-
/* Switch from the station address to the alternate register set and
read the useful registers there. */
outb(0x80 | reg4, ioaddr + 4);
@@ -253,8 +250,10 @@ static int __init ultra_probe1(struct ne
irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)];

if (irq == 0) {
- printk(", failed to detect IRQ line.\n");
- retval = -EAGAIN;
+ printk(KERN_ERR "%s at %#3x, %s, "
+ "failed to detect IRQ line.\n", model_name,
+ ioaddr, print_mac(mac, dev->dev_addr));
+ retval = -EAGAIN;
goto out;
}
dev->irq = irq;
@@ -280,22 +279,19 @@ static int __init ultra_probe1(struct ne

ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256);
if (!ei_status.mem) {
- printk(", failed to ioremap.\n");
- retval = -ENOMEM;
+ printk(KERN_ERR "%s at %#3x, %s, failed to ioremap.\n",
+ model_name, ioaddr, print_mac(mac, dev->dev_addr));
+ retval = -ENOMEM;
goto out;
}

dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256;

if (piomode) {
- printk(",%s IRQ %d programmed-I/O mode.\n",
- eeprom_irq ? "EEPROM" : "assigned ", dev->irq);
ei_status.block_input = &ultra_pio_input;
ei_status.block_output = &ultra_pio_output;
ei_status.get_8390_hdr = &ultra_pio_get_hdr;
} else {
- printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ",
- dev->irq, dev->mem_start, dev->mem_end-1);
ei_status.block_input = &ultra_block_input;
ei_status.block_output = &ultra_block_output;
ei_status.get_8390_hdr = &ultra_get_8390_hdr;
@@ -311,6 +307,21 @@ static int __init ultra_probe1(struct ne
retval = register_netdev(dev);
if (retval)
goto out;
+
+ if (piomode) {
+ printk(KERN_INFO "%s: %s at %#3x, %s,"
+ "%s IRQ %d programmed-I/O mode.\n",
+ dev->name, model_name, ioaddr,
+ print_mac(mac, dev->dev_addr),
+ eeprom_irq ? " EEPROM" : " assigned", dev->irq);
+ } else {
+ printk(KERN_INFO "%s: %s at %#3x, %s,"
+ "%s IRQ %d memory %#lx-%#lx.\n",
+ dev->name, model_name, ioaddr,
+ print_mac(mac, dev->dev_addr),
+ eeprom_irq ? "" : " assigned",
+ dev->irq, dev->mem_start, dev->mem_end-1);
+ }
return 0;
out:
release_region(ioaddr, ULTRA_IO_EXTENT);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/