Who is the maintainer of drivers/block/floppy.c and associated files?[...]
I ask because there are a few of us still using it, in particular with what some may call oddball disk formats & I'm up to here with doing such as this:
[root@coyote coco3]# setfdprm /dev/fd0 COCO7203.5
[root@coyote coco3]# getfdprm /dev/fd0
get geometry parameters: No such device
Or: Assuming the above took,
[root@coyote coco3]# dd if=/dev/fd0 of=test.dsk
dd: reading `/dev/fd0': Input/output error
0+0 records in
0+0 records out
0 bytes (0 B) copied, 25.5495 s, 0.0 kB/s
/var/log/messages is full of these now:
May 23 21:02:07 coyote kernel: [20603.055178] floppy0: probe failed...
May 23 21:02:07 coyote kernel: [20603.455755] floppy0: unexpected interrupt
May 23 21:02:07 coyote kernel: [20603.455827] floppy0: sensei repl[0]=80
May 23 21:02:07 coyote kernel: [20603.456135] floppy0: -- FDC reply errorfloppy0: probe failed...
The drive led is on and the disk is turning during that 25 seconds.
This is booted to 2.6.26-rc2, with the floppy driver built in.
2.6.26-rc1 worked flawlessly yesterday, for both writing, then reading back for a cmp session, twice each way, until it(2.6.26-rc1) went away after about 3 hours uptime, the 5th time -rc1 had done this to me without a single footprint in the logs. -rc2 is doing better, uptime is 5:45 so far.[...]