[Patch 11/18] isolate activate IRQ's hardware specific components
From: Dean Nelson
Date: Fri Jun 06 2008 - 12:54:32 EST
Isolate architecture specific code related to XPC's activate IRQ.
Signed-off-by: Dean Nelson <dcn@xxxxxxx>
---
drivers/misc/sgi-xp/xpc.h | 14 +-
drivers/misc/sgi-xp/xpc_main.c | 96 ++++----------
drivers/misc/sgi-xp/xpc_partition.c | 121 -----------------
drivers/misc/sgi-xp/xpc_sn2.c | 217 ++++++++++++++++++++++++++++----
4 files changed, 229 insertions(+), 219 deletions(-)
Index: linux-2.6/drivers/misc/sgi-xp/xpc_main.c
===================================================================
--- linux-2.6.orig/drivers/misc/sgi-xp/xpc_main.c 2008-05-28 10:48:52.750718708 -0500
+++ linux-2.6/drivers/misc/sgi-xp/xpc_main.c 2008-05-30 08:55:11.902785903 -0500
@@ -147,11 +147,11 @@ static struct ctl_table_header *xpc_sysc
/* non-zero if any remote partition disengage request was timed out */
int xpc_disengage_request_timedout;
-/* #of IRQs received */
-atomic_t xpc_act_IRQ_rcvd;
+/* #of activate IRQs received */
+atomic_t xpc_activate_IRQ_rcvd = ATOMIC_INIT(0);
/* IRQ handler notifies this wait queue on receipt of an IRQ */
-DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
+DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
static unsigned long xpc_hb_check_timeout;
static struct timer_list xpc_hb_timer;
@@ -190,7 +190,7 @@ struct xpc_msg *(*xpc_get_deliverable_ms
void (*xpc_initiate_partition_activation) (struct xpc_rsvd_page *remote_rp,
u64 remote_rp_pa, int nasid);
-void (*xpc_process_act_IRQ_rcvd) (int n_IRQs_expected);
+void (*xpc_process_activate_IRQ_rcvd) (int n_IRQs_expected);
enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *part);
void (*xpc_teardown_infrastructure) (struct xpc_partition *part);
@@ -239,17 +239,6 @@ xpc_timeout_partition_disengage_request(
}
/*
- * Notify the heartbeat check thread that an IRQ has been received.
- */
-static irqreturn_t
-xpc_act_IRQ_handler(int irq, void *dev_id)
-{
- atomic_inc(&xpc_act_IRQ_rcvd);
- wake_up_interruptible(&xpc_act_IRQ_wq);
- return IRQ_HANDLED;
-}
-
-/*
* Timer to produce the heartbeat. The timer structures function is
* already set when this is initially called. A tunable is used to
* specify when the next timeout should occur.
@@ -260,7 +249,7 @@ xpc_hb_beater(unsigned long dummy)
xpc_increment_heartbeat();
if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
- wake_up_interruptible(&xpc_act_IRQ_wq);
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
add_timer(&xpc_hb_timer);
@@ -306,7 +295,7 @@ xpc_hb_checker(void *ignore)
dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
"been received\n",
(int)(xpc_hb_check_timeout - jiffies),
- atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count);
+ atomic_read(&xpc_activate_IRQ_rcvd) - last_IRQ_count);
/* checking of remote heartbeats is skewed by IRQ handling */
if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
@@ -322,15 +311,15 @@ xpc_hb_checker(void *ignore)
}
/* check for outstanding IRQs */
- new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
+ new_IRQ_count = atomic_read(&xpc_activate_IRQ_rcvd);
if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
force_IRQ = 0;
dev_dbg(xpc_part, "found an IRQ to process; will be "
"resetting xpc_hb_check_timeout\n");
- xpc_process_act_IRQ_rcvd(new_IRQ_count -
- last_IRQ_count);
+ xpc_process_activate_IRQ_rcvd(new_IRQ_count -
+ last_IRQ_count);
last_IRQ_count = new_IRQ_count;
xpc_hb_check_timeout = jiffies +
@@ -338,9 +327,9 @@ xpc_hb_checker(void *ignore)
}
/* wait for IRQ or timeout */
- (void)wait_event_interruptible(xpc_act_IRQ_wq,
- (last_IRQ_count <
- atomic_read(&xpc_act_IRQ_rcvd)
+ (void)wait_event_interruptible(xpc_activate_IRQ_wq,
+ (last_IRQ_count < atomic_read(
+ &xpc_activate_IRQ_rcvd)
|| time_is_before_eq_jiffies(
xpc_hb_check_timeout) ||
xpc_exiting));
@@ -884,10 +873,7 @@ xpc_do_exit(enum xp_retval reason)
* the heartbeat checker thread in case it's sleeping.
*/
xpc_exiting = 1;
- wake_up_interruptible(&xpc_act_IRQ_wq);
-
- /* ignore all incoming interrupts */
- free_irq(SGI_XPC_ACTIVATE, NULL);
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
/* wait for the discovery thread to exit */
wait_for_completion(&xpc_discovery_exited);
@@ -968,9 +954,6 @@ xpc_do_exit(enum xp_retval reason)
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
}
- /* close down protections for IPI operations */
- xpc_restrict_IPI_ops();
-
/* clear the interface to XPC's functions */
xpc_clear_interface();
@@ -979,6 +962,11 @@ xpc_do_exit(enum xp_retval reason)
kfree(xpc_partitions);
kfree(xpc_remote_copy_buffer_base);
+
+ if (is_shub())
+ xpc_exit_sn2();
+ else
+ xpc_exit_uv();
}
/*
@@ -1144,7 +1132,9 @@ xpc_init(void)
if (xp_max_npartitions != 64)
return -EINVAL;
- xpc_init_sn2();
+ ret = xpc_init_sn2();
+ if (ret != 0)
+ return ret;
} else if (is_uv()) {
xpc_init_uv();
@@ -1163,7 +1153,8 @@ xpc_init(void)
&xpc_remote_copy_buffer_base);
if (xpc_remote_copy_buffer == NULL) {
dev_err(xpc_part, "can't get memory for remote copy buffer\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_1;
}
xpc_partitions = kzalloc(sizeof(struct xpc_partition) *
@@ -1171,7 +1162,7 @@ xpc_init(void)
if (xpc_partitions == NULL) {
dev_err(xpc_part, "can't get memory for partition structure\n");
ret = -ENOMEM;
- goto out_1;
+ goto out_2;
}
/*
@@ -1187,7 +1178,7 @@ xpc_init(void)
DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
- part->act_IRQ_rcvd = 0;
+ part->activate_IRQ_rcvd = 0;
spin_lock_init(&part->act_lock);
part->act_state = XPC_P_INACTIVE;
XPC_SET_REASON(part, 0, 0);
@@ -1205,33 +1196,6 @@ xpc_init(void)
xpc_sysctl = register_sysctl_table(xpc_sys_dir);
/*
- * Open up protections for IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
- xpc_allow_IPI_ops();
-
- /*
- * Interrupts being processed will increment this atomic variable and
- * awaken the heartbeat thread which will process the interrupts.
- */
- atomic_set(&xpc_act_IRQ_rcvd, 0);
-
- /*
- * This is safe to do before the xpc_hb_checker thread has started
- * because the handler releases a wait queue. If an interrupt is
- * received before the thread is waiting, it will not go to sleep,
- * but rather immediately process the interrupt.
- */
- ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0,
- "xpc hb", NULL);
- if (ret != 0) {
- dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
- "errno=%d\n", -ret);
- ret = -EBUSY;
- goto out_2;
- }
-
- /*
* Fill the partition reserved page with the information needed by
* other partitions to discover we are alive and establish initial
* communications.
@@ -1296,14 +1260,16 @@ out_4:
(void)unregister_die_notifier(&xpc_die_notifier);
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
out_3:
- free_irq(SGI_XPC_ACTIVATE, NULL);
-out_2:
- xpc_restrict_IPI_ops();
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
kfree(xpc_partitions);
-out_1:
+out_2:
kfree(xpc_remote_copy_buffer_base);
+out_1:
+ if (is_shub())
+ xpc_exit_sn2();
+ else
+ xpc_exit_uv();
return ret;
}
Index: linux-2.6/drivers/misc/sgi-xp/xpc_partition.c
===================================================================
--- linux-2.6.orig/drivers/misc/sgi-xp/xpc_partition.c 2008-05-28 10:48:51.978623224 -0500
+++ linux-2.6/drivers/misc/sgi-xp/xpc_partition.c 2008-05-30 08:55:11.902785903 -0500
@@ -29,16 +29,6 @@
/* XPC is exiting flag */
int xpc_exiting;
-/* SH_IPI_ACCESS shub register value on startup */
-static u64 xpc_sh1_IPI_access;
-static u64 xpc_sh2_IPI_access0;
-static u64 xpc_sh2_IPI_access1;
-static u64 xpc_sh2_IPI_access2;
-static u64 xpc_sh2_IPI_access3;
-
-/* original protection values for each node */
-u64 xpc_prot_vec[MAX_NUMNODES];
-
/* this partition's reserved page pointers */
struct xpc_rsvd_page *xpc_rsvd_page;
static u64 *xpc_part_nasids;
@@ -211,117 +201,6 @@ xpc_setup_rsvd_page(void)
}
/*
- * Change protections to allow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
-void
-xpc_allow_IPI_ops(void)
-{
- int node;
- int nasid;
-
- /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
- if (is_shub2()) {
- xpc_sh2_IPI_access0 =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
- xpc_sh2_IPI_access1 =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
- xpc_sh2_IPI_access2 =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
- xpc_sh2_IPI_access3 =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
-
- for_each_online_node(node) {
- nasid = cnodeid_to_nasid(node);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
- -1UL);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
- -1UL);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
- -1UL);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
- -1UL);
- }
-
- } else {
- xpc_sh1_IPI_access =
- (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
-
- for_each_online_node(node) {
- nasid = cnodeid_to_nasid(node);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
- -1UL);
-
- /*
- * Since the BIST collides with memory operations on
- * SHUB 1.1 sn_change_memprotect() cannot be used.
- */
- if (enable_shub_wars_1_1()) {
- /* open up everything */
- xpc_prot_vec[node] = (u64)HUB_L((u64 *)
- GLOBAL_MMR_ADDR
- (nasid,
- SH1_MD_DQLP_MMR_DIR_PRIVEC0));
- HUB_S((u64 *)
- GLOBAL_MMR_ADDR(nasid,
- SH1_MD_DQLP_MMR_DIR_PRIVEC0),
- -1UL);
- HUB_S((u64 *)
- GLOBAL_MMR_ADDR(nasid,
- SH1_MD_DQRP_MMR_DIR_PRIVEC0),
- -1UL);
- }
- }
- }
-}
-
-/*
- * Restrict protections to disallow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
-void
-xpc_restrict_IPI_ops(void)
-{
- int node;
- int nasid;
-
- /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
- if (is_shub2()) {
-
- for_each_online_node(node) {
- nasid = cnodeid_to_nasid(node);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
- xpc_sh2_IPI_access0);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
- xpc_sh2_IPI_access1);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
- xpc_sh2_IPI_access2);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
- xpc_sh2_IPI_access3);
- }
-
- } else {
-
- for_each_online_node(node) {
- nasid = cnodeid_to_nasid(node);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
- xpc_sh1_IPI_access);
-
- if (enable_shub_wars_1_1()) {
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
- SH1_MD_DQLP_MMR_DIR_PRIVEC0),
- xpc_prot_vec[node]);
- HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
- SH1_MD_DQRP_MMR_DIR_PRIVEC0),
- xpc_prot_vec[node]);
- }
- }
- }
-}
-
-/*
* Get a copy of a portion of the remote partition's rsvd page.
*
* remote_rp points to a buffer that is cacheline aligned for BTE copies and
Index: linux-2.6/drivers/misc/sgi-xp/xpc_sn2.c
===================================================================
--- linux-2.6.orig/drivers/misc/sgi-xp/xpc_sn2.c 2008-05-28 10:48:52.774721677 -0500
+++ linux-2.6/drivers/misc/sgi-xp/xpc_sn2.c 2008-05-30 08:58:01.275821609 -0500
@@ -22,6 +22,87 @@
static struct xpc_vars_sn2 *xpc_vars; /* >>> Add _sn2 suffix? */
static struct xpc_vars_part_sn2 *xpc_vars_part; /* >>> Add _sn2 suffix? */
+/* SH_IPI_ACCESS shub register value on startup */
+static u64 xpc_sh1_IPI_access;
+static u64 xpc_sh2_IPI_access0;
+static u64 xpc_sh2_IPI_access1;
+static u64 xpc_sh2_IPI_access2;
+static u64 xpc_sh2_IPI_access3;
+
+/*
+ * Change protections to allow IPI operations.
+ */
+static void
+xpc_allow_IPI_ops_sn2(void)
+{
+ int node;
+ int nasid;
+
+ /* >>> The following should get moved into SAL. */
+ if (is_shub2()) {
+ xpc_sh2_IPI_access0 =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
+ xpc_sh2_IPI_access1 =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
+ xpc_sh2_IPI_access2 =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
+ xpc_sh2_IPI_access3 =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
+
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+ -1UL);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+ -1UL);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+ -1UL);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+ -1UL);
+ }
+ } else {
+ xpc_sh1_IPI_access =
+ (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
+
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+ -1UL);
+ }
+ }
+}
+
+/*
+ * Restrict protections to disallow IPI operations.
+ */
+static void
+xpc_disallow_IPI_ops_sn2(void)
+{
+ int node;
+ int nasid;
+
+ /* >>> The following should get moved into SAL. */
+ if (is_shub2()) {
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+ xpc_sh2_IPI_access0);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+ xpc_sh2_IPI_access1);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+ xpc_sh2_IPI_access2);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+ xpc_sh2_IPI_access3);
+ }
+ } else {
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+ xpc_sh1_IPI_access);
+ }
+ }
+}
+
/*
* The following set of macros and functions are used for the sending and
* receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
@@ -74,6 +155,17 @@ xpc_IPI_init_sn2(int index)
*/
/*
+ * Notify the heartbeat check thread that an activate IRQ has been received.
+ */
+static irqreturn_t
+xpc_handle_activate_IRQ_sn2(int irq, void *dev_id)
+{
+ atomic_inc(&xpc_activate_IRQ_rcvd);
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
+ return IRQ_HANDLED;
+}
+
+/*
* Flag the appropriate AMO variable and send an IPI to the specified node.
*/
static void
@@ -100,8 +192,8 @@ xpc_activate_IRQ_send_local_sn2(int from
/* fake the sending and receipt of an activate IRQ from remote nasid */
FETCHOP_STORE_OP(TO_AMO((u64)&amos[w_index].variable), FETCHOP_OR,
(1UL << b_index));
- atomic_inc(&xpc_act_IRQ_rcvd);
- wake_up_interruptible(&xpc_act_IRQ_wq);
+ atomic_inc(&xpc_activate_IRQ_rcvd);
+ wake_up_interruptible(&xpc_activate_IRQ_wq);
}
static void
@@ -383,11 +475,65 @@ xpc_clear_partition_disengage_request_sn
~partid_mask);
}
+/* original protection values for each node */
+static u64 xpc_prot_vec_sn2[MAX_NUMNODES];
+
+/*
+ * Change protections to allow AMO operations on non-Shub 1.1 systems.
+ */
+static enum xp_retval
+xpc_allow_AMO_ops_sn2(AMO_t *amos_page)
+{
+ u64 nasid_array = 0;
+ int ret;
+
+ /*
+ * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST
+ * collides with memory operations. On those systems we call
+ * xpc_allow_AMO_ops_shub_wars_1_1_sn2() instead.
+ */
+ if (!enable_shub_wars_1_1()) {
+ ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE,
+ SN_MEMPROT_ACCESS_CLASS_1,
+ &nasid_array);
+ if (ret != 0)
+ return xpSalError;
+ }
+ return xpSuccess;
+}
+
+/*
+ * Change protections to allow AMO operations on Shub 1.1 systems.
+ */
+static void
+xpc_allow_AMO_ops_shub_wars_1_1_sn2(void)
+{
+ int node;
+ int nasid;
+
+ if (!enable_shub_wars_1_1())
+ return;
+
+ for_each_online_node(node) {
+ nasid = cnodeid_to_nasid(node);
+ /* save current protection values */
+ xpc_prot_vec_sn2[node] =
+ (u64)HUB_L((u64 *)GLOBAL_MMR_ADDR(nasid,
+ SH1_MD_DQLP_MMR_DIR_PRIVEC0));
+ /* open up everything */
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+ SH1_MD_DQLP_MMR_DIR_PRIVEC0),
+ -1UL);
+ HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+ SH1_MD_DQRP_MMR_DIR_PRIVEC0),
+ -1UL);
+ }
+}
+
static enum xp_retval
xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp)
{
AMO_t *amos_page;
- u64 nasid_array = 0;
int i;
int ret;
@@ -421,21 +567,15 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_p
}
/*
- * Open up AMO-R/W to cpu. This is done for Shub 1.1 systems
- * when xpc_allow_IPI_ops() is called via xpc_hb_init().
+ * Open up AMO-R/W to cpu. This is done on Shub 1.1 systems
+ * when xpc_allow_AMO_ops_shub_wars_1_1_sn2() is called.
*/
- if (!enable_shub_wars_1_1()) {
- ret = sn_change_memprotect(ia64_tpa((u64)amos_page),
- PAGE_SIZE,
- SN_MEMPROT_ACCESS_CLASS_1,
- &nasid_array);
- if (ret != 0) {
- dev_err(xpc_part, "can't change memory "
- "protections\n");
- uncached_free_page(__IA64_UNCACHED_OFFSET |
- TO_PHYS((u64)amos_page), 1);
- return xpSalError;
- }
+ ret = xpc_allow_AMO_ops_sn2(amos_page);
+ if (ret != xpSuccess) {
+ dev_err(xpc_part, "can't allow AMO operations\n");
+ uncached_free_page(__IA64_UNCACHED_OFFSET |
+ TO_PHYS((u64)amos_page), 1);
+ return ret;
}
}
@@ -656,7 +796,7 @@ xpc_update_partition_info_sn2(struct xpc
* initialized reserved page.
*/
static void
-xpc_identify_act_IRQ_req_sn2(int nasid)
+xpc_identify_activate_IRQ_req_sn2(int nasid)
{
struct xpc_rsvd_page *remote_rp;
struct xpc_vars_sn2 *remote_vars;
@@ -702,10 +842,10 @@ xpc_identify_act_IRQ_req_sn2(int nasid)
return;
}
- part->act_IRQ_rcvd++;
+ part->activate_IRQ_rcvd++;
dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
- "%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd,
+ "%ld:0x%lx\n", (int)nasid, (int)partid, part->activate_IRQ_rcvd,
remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]);
if (xpc_partition_disengaged(part) &&
@@ -831,7 +971,7 @@ xpc_identify_act_IRQ_req_sn2(int nasid)
* Return #of IRQs detected.
*/
int
-xpc_identify_act_IRQ_sender_sn2(void)
+xpc_identify_activate_IRQ_sender_sn2(void)
{
int word, bit;
u64 nasid_mask;
@@ -872,7 +1012,7 @@ xpc_identify_act_IRQ_sender_sn2(void)
nasid = XPC_NASID_FROM_W_B(word, bit);
dev_dbg(xpc_part, "interrupt from nasid %ld\n",
nasid);
- xpc_identify_act_IRQ_req_sn2(nasid);
+ xpc_identify_activate_IRQ_req_sn2(nasid);
}
}
}
@@ -880,14 +1020,14 @@ xpc_identify_act_IRQ_sender_sn2(void)
}
static void
-xpc_process_act_IRQ_rcvd_sn2(int n_IRQs_expected)
+xpc_process_activate_IRQ_rcvd_sn2(int n_IRQs_expected)
{
int n_IRQs_detected;
- n_IRQs_detected = xpc_identify_act_IRQ_sender_sn2();
+ n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2();
if (n_IRQs_detected < n_IRQs_expected) {
/* retry once to help avoid missing AMO */
- (void)xpc_identify_act_IRQ_sender_sn2();
+ (void)xpc_identify_activate_IRQ_sender_sn2();
}
}
@@ -1775,9 +1915,11 @@ xpc_received_msg_sn2(struct xpc_channel
xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
}
-void
+int
xpc_init_sn2(void)
{
+ int ret;
+
xpc_rsvd_page_init = xpc_rsvd_page_init_sn2;
xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
@@ -1788,7 +1930,7 @@ xpc_init_sn2(void)
xpc_initiate_partition_activation =
xpc_initiate_partition_activation_sn2;
- xpc_process_act_IRQ_rcvd = xpc_process_act_IRQ_rcvd_sn2;
+ xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
xpc_setup_infrastructure = xpc_setup_infrastructure_sn2;
xpc_teardown_infrastructure = xpc_teardown_infrastructure_sn2;
xpc_make_first_contact = xpc_make_first_contact_sn2;
@@ -1819,9 +1961,30 @@ xpc_init_sn2(void)
xpc_send_msg = xpc_send_msg_sn2;
xpc_received_msg = xpc_received_msg_sn2;
+
+ /* open up protections for IPI and [potentially] AMO operations */
+ xpc_allow_IPI_ops_sn2();
+ xpc_allow_AMO_ops_shub_wars_1_1_sn2();
+
+ /*
+ * This is safe to do before the xpc_hb_checker thread has started
+ * because the handler releases a wait queue. If an interrupt is
+ * received before the thread is waiting, it will not go to sleep,
+ * but rather immediately process the interrupt.
+ */
+ ret = request_irq(SGI_XPC_ACTIVATE, xpc_handle_activate_IRQ_sn2, 0,
+ "xpc hb", NULL);
+ if (ret != 0) {
+ dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
+ "errno=%d\n", -ret);
+ xpc_disallow_IPI_ops_sn2();
+ }
+ return ret;
}
void
xpc_exit_sn2(void)
{
+ free_irq(SGI_XPC_ACTIVATE, NULL);
+ xpc_disallow_IPI_ops_sn2();
}
Index: linux-2.6/drivers/misc/sgi-xp/xpc.h
===================================================================
--- linux-2.6.orig/drivers/misc/sgi-xp/xpc.h 2008-05-28 10:48:52.742717719 -0500
+++ linux-2.6/drivers/misc/sgi-xp/xpc.h 2008-05-30 08:55:11.902785903 -0500
@@ -480,7 +480,7 @@ struct xpc_partition {
u64 remote_amos_page_pa; /* phys addr of partition's amos page */
int remote_act_nasid; /* active part's act/deact nasid */
int remote_act_phys_cpuid; /* active part's act/deact phys cpuid */
- u32 act_IRQ_rcvd; /* IRQs since activation */
+ u32 activate_IRQ_rcvd; /* IRQs since activation */
spinlock_t act_lock; /* protect updating of act_state */
u8 act_state; /* from XPC HB viewpoint */
u8 remote_vars_version; /* version# of partition's vars */
@@ -580,8 +580,8 @@ extern struct device *xpc_part;
extern struct device *xpc_chan;
extern int xpc_disengage_request_timelimit;
extern int xpc_disengage_request_timedout;
-extern atomic_t xpc_act_IRQ_rcvd;
-extern wait_queue_head_t xpc_act_IRQ_wq;
+extern atomic_t xpc_activate_IRQ_rcvd;
+extern wait_queue_head_t xpc_activate_IRQ_wq;
extern void *xpc_heartbeating_to_mask;
extern irqreturn_t xpc_notify_IRQ_handler(int, void *);
extern void xpc_dropped_IPI_check(struct xpc_partition *);
@@ -601,7 +601,7 @@ extern u64 (*xpc_get_IPI_flags) (struct
extern struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *);
extern void (*xpc_initiate_partition_activation) (struct xpc_rsvd_page *, u64,
int);
-extern void (*xpc_process_act_IRQ_rcvd) (int);
+extern void (*xpc_process_activate_IRQ_rcvd) (int);
extern enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *);
extern void (*xpc_teardown_infrastructure) (struct xpc_partition *);
extern void (*xpc_mark_partition_engaged) (struct xpc_partition *);
@@ -629,10 +629,12 @@ extern enum xp_retval (*xpc_send_msg) (s
extern void (*xpc_received_msg) (struct xpc_channel *, struct xpc_msg *);
/* found in xpc_sn2.c */
-extern void xpc_init_sn2(void);
+extern int xpc_init_sn2(void);
+extern void xpc_exit_sn2(void);
/* found in xpc_uv.c */
extern void xpc_init_uv(void);
+extern void xpc_exit_uv(void);
/* found in xpc_partition.c */
extern int xpc_exiting;
@@ -646,7 +648,7 @@ extern void *xpc_kmalloc_cacheline_align
extern struct xpc_rsvd_page *xpc_setup_rsvd_page(void);
extern void xpc_allow_IPI_ops(void);
extern void xpc_restrict_IPI_ops(void);
-extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_identify_activate_IRQ_sender(void);
extern int xpc_partition_disengaged(struct xpc_partition *);
extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *);
extern void xpc_mark_partition_inactive(struct xpc_partition *);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/