Re: Change console to another UART

[Nobuhiro Iwamatsu]

Hi,

2008/6/18 oihana <munoz.o@xxxxxxxx>:
> Hello,
>
> I am working with a STi7109 and mb411. The STi7109 has 4 UARTs and they
> are configured by default as follow....
> - UART0 is reserved for SC0
> - UART1 is reserved for SC1
> - UART2 is reserved for console
> - UART3 is reserved for KGDB
>
> What I need is to have the Console in the UART1 because I need the UART2
> free, and I have enough with one SC (SC0).
>
> I realized that if I change on my STWorkBench the Kernel Debug
> configuration, from ttyAS0 to ttyAS1, the console comes out from the
> other serial port, but it still uses the UART2.
>
> So I tried to change the configuration in the stasc.c
> (kernel/src/drivers/serial/stasc.c).
Hmm? I could not find it.
Is this a thing peculiar to ST?
You should send an email to support of ST if so.

Best regards,
 Nobuhiro
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/