Re: [patch 6/6] x86: add c1e aware idle function

[Rafael J. Wysocki]

On Wednesday, 18 of June 2008, Thomas Gleixner wrote:
> On Wed, 18 Jun 2008, Rafael J. Wysocki wrote:
> > On Wednesday, 18 of June 2008, Pavel Machek wrote:
> > > On Thu 2008-06-12 10:29:00, Thomas Gleixner wrote:
> > > > C1E on AMD machines is like C3 but without control from the OS. Up to
> > > > now we disabled the local apic timer for those machines as it stops
> > > > when the CPU goes into C1E. This excludes those machines from high
> > > > resolution timers / dynamic ticks, which hurts especially the X2 based
> > > > laptops.
> > > > 
> > > > The current boot time C1E detection has another more serious flaw:
> > > > some BIOSes do not enable C1E until the ACPI processor module is
> > > > loaded. This causes systems to stop working after that point.
> > > > 
> > > > To work nicely with C1E enabled machines we use a separate idle
> > > > function, which checks on idle entry whether C1E was enabled in the
> > > > Interrupt Pending Message MSR. This allows us to do timer broadcasting
> > > 
> > > Entering idle is quite a common operation, and reading MSR is quite
> > > slow. Is it possible to do better here?
> > > 
> > > What happens if ACPI BIOS toggles MSR on all cpus *while* we are
> > > entering idle? This seems inherently racy...
> 
> Well, on most of the machines we see the C1E bit on the first idle
> entry either on CPU0 or on CPU1.
> 
> I know of exactly one machine which has the C1E thing enabled late
> when the ACPI stuff runs.
>  
> > Yes, and that fits the picture I'm observing on the nx6325 (see the
> > "linux-next: Tree for June 13: IO APIC breakage on HP nx6325" thread).
> 
> Hmm, when is the C1E detected on current mainline ? Does the boot CPU
> have it or is it when the second CPU comes up ?

How can I check that?

Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/