[PATCH 42/70] tty-usb-io_edgeport: Coding style
From: Alan Cox
Date: Fri Jun 20 2008 - 16:31:26 EST
From: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
---
drivers/usb/serial/io_edgeport.c | 1965 +++++++++++++++++++++-----------------
drivers/usb/serial/io_tables.h | 6
2 files changed, 1107 insertions(+), 864 deletions(-)
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 1d8d130..3cb2511 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -42,7 +42,7 @@
#include <linux/serial.h>
#include <linux/ioctl.h>
#include <linux/wait.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "io_edgeport.h"
@@ -59,14 +59,17 @@
/* First, the latest boot code - for first generation edgeports */
#define IMAGE_ARRAY_NAME BootCodeImage_GEN1
#define IMAGE_VERSION_NAME BootCodeImageVersion_GEN1
-#include "io_fw_boot.h" /* the bootloader firmware to download to a device, if it needs it */
+#include "io_fw_boot.h" /* the bootloader firmware to download to
+ a device, if it needs it */
/* for second generation edgeports */
#define IMAGE_ARRAY_NAME BootCodeImage_GEN2
#define IMAGE_VERSION_NAME BootCodeImageVersion_GEN2
-#include "io_fw_boot2.h" /* the bootloader firmware to download to a device, if it needs it */
+#include "io_fw_boot2.h" /* the bootloader firmware to download to
+ a device, if it needs it */
-/* Then finally the main run-time operational code - for first generation edgeports */
+/* Then finally the main run-time operational code - for first generation
+ edgeports */
#define IMAGE_ARRAY_NAME OperationalCodeImage_GEN1
#define IMAGE_VERSION_NAME OperationalCodeImageVersion_GEN1
#include "io_fw_down.h" /* Define array OperationalCodeImage[] */
@@ -84,16 +87,16 @@
/* receive port state */
enum RXSTATE {
- EXPECT_HDR1 = 0, /* Expect header byte 1 */
- EXPECT_HDR2 = 1, /* Expect header byte 2 */
- EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */
- EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */
+ EXPECT_HDR1 = 0, /* Expect header byte 1 */
+ EXPECT_HDR2 = 1, /* Expect header byte 2 */
+ EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */
+ EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */
};
-/* Transmit Fifo
- * This Transmit queue is an extension of the edgeport Rx buffer.
- * The maximum amount of data buffered in both the edgeport
+/* Transmit Fifo
+ * This Transmit queue is an extension of the edgeport Rx buffer.
+ * The maximum amount of data buffered in both the edgeport
* Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits.
*/
struct TxFifo {
@@ -150,12 +153,12 @@ struct edgeport_serial {
int is_epic; /* flag if EPiC device or not */
__u8 interrupt_in_endpoint; /* the interrupt endpoint handle */
- unsigned char * interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */
- struct urb * interrupt_read_urb; /* our interrupt urb */
+ unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */
+ struct urb *interrupt_read_urb; /* our interrupt urb */
__u8 bulk_in_endpoint; /* the bulk in endpoint handle */
- unsigned char * bulk_in_buffer; /* the buffer we use for the bulk in endpoint */
- struct urb * read_urb; /* our bulk read urb */
+ unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */
+ struct urb *read_urb; /* our bulk read urb */
bool read_in_progress;
spinlock_t es_lock;
@@ -180,16 +183,17 @@ struct divisor_table_entry {
__u16 Divisor;
};
-//
-// Define table of divisors for Rev A EdgePort/4 hardware
-// These assume a 3.6864MHz crystal, the standard /16, and
-// MCR.7 = 0.
-//
+/*
+ * Define table of divisors for Rev A EdgePort/4 hardware
+ * These assume a 3.6864MHz crystal, the standard /16, and
+ * MCR.7 = 0.
+ */
+
static const struct divisor_table_entry divisor_table[] = {
- { 50, 4608},
- { 75, 3072},
- { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */
- { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */
+ { 50, 4608},
+ { 75, 3072},
+ { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */
+ { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */
{ 150, 1536},
{ 300, 768},
{ 600, 384},
@@ -212,65 +216,86 @@ static int debug;
static int low_latency = 1; /* tty low latency flag, on by default */
-static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */
+static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */
/* local function prototypes */
/* function prototypes for all URB callbacks */
-static void edge_interrupt_callback (struct urb *urb);
-static void edge_bulk_in_callback (struct urb *urb);
-static void edge_bulk_out_data_callback (struct urb *urb);
-static void edge_bulk_out_cmd_callback (struct urb *urb);
+static void edge_interrupt_callback(struct urb *urb);
+static void edge_bulk_in_callback(struct urb *urb);
+static void edge_bulk_out_data_callback(struct urb *urb);
+static void edge_bulk_out_cmd_callback(struct urb *urb);
/* function prototypes for the usbserial callbacks */
-static int edge_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void edge_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int edge_write (struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static int edge_write_room (struct tty_struct *tty);
-static int edge_chars_in_buffer (struct tty_struct *tty);
-static void edge_throttle (struct tty_struct *tty);
-static void edge_unthrottle (struct tty_struct *tty);
-static void edge_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios);
-static int edge_ioctl (struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
-static void edge_break (struct tty_struct *tty, int break_state);
-static int edge_tiocmget (struct tty_struct *tty, struct file *file);
-static int edge_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
-static int edge_startup (struct usb_serial *serial);
-static void edge_shutdown (struct usb_serial *serial);
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp);
+static void edge_close(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp);
+static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+static int edge_write_room(struct tty_struct *tty);
+static int edge_chars_in_buffer(struct tty_struct *tty);
+static void edge_throttle(struct tty_struct *tty);
+static void edge_unthrottle(struct tty_struct *tty);
+static void edge_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios);
+static int edge_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void edge_break(struct tty_struct *tty, int break_state);
+static int edge_tiocmget(struct tty_struct *tty, struct file *file);
+static int edge_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear);
+static int edge_startup(struct usb_serial *serial);
+static void edge_shutdown(struct usb_serial *serial);
#include "io_tables.h" /* all of the devices that this driver supports */
/* function prototypes for all of our local functions */
-static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength);
-static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3);
-static void edge_tty_recv (struct device *dev, struct tty_struct *tty, unsigned char *data, int length);
-static void handle_new_msr (struct edgeport_port *edge_port, __u8 newMsr);
-static void handle_new_lsr (struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data);
-static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param);
-static int calc_baud_rate_divisor (int baud_rate, int *divisor);
-static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate);
-static void change_port_settings (struct tty_struct *tty, struct edgeport_port *edge_port,
- struct ktermios *old_termios);
-static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue);
-static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int writeLength);
-static void send_more_port_data (struct edgeport_serial *edge_serial, struct edgeport_port *edge_port);
-
-static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data);
-static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data);
-static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data);
-static void get_manufacturing_desc (struct edgeport_serial *edge_serial);
-static void get_boot_desc (struct edgeport_serial *edge_serial);
-static void load_application_firmware (struct edgeport_serial *edge_serial);
-
-static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size);
-
-
-// ************************************************************************
-// ************************************************************************
-// ************************************************************************
-// ************************************************************************
+static void process_rcvd_data(struct edgeport_serial *edge_serial,
+ unsigned char *buffer, __u16 bufferLength);
+static void process_rcvd_status(struct edgeport_serial *edge_serial,
+ __u8 byte2, __u8 byte3);
+static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
+ unsigned char *data, int length);
+static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr);
+static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
+ __u8 lsr, __u8 data);
+static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command,
+ __u8 param);
+static int calc_baud_rate_divisor(int baud_rate, int *divisor);
+static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
+ int baudRate);
+static void change_port_settings(struct tty_struct *tty,
+ struct edgeport_port *edge_port,
+ struct ktermios *old_termios);
+static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
+ __u8 regNum, __u8 regValue);
+static int write_cmd_usb(struct edgeport_port *edge_port,
+ unsigned char *buffer, int writeLength);
+static void send_more_port_data(struct edgeport_serial *edge_serial,
+ struct edgeport_port *edge_port);
+
+static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+ __u16 length, __u8 *data);
+static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+ __u16 length, __u8 *data);
+static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+ __u16 length, __u8 *data);
+static void get_manufacturing_desc(struct edgeport_serial *edge_serial);
+static void get_boot_desc(struct edgeport_serial *edge_serial);
+static void load_application_firmware(struct edgeport_serial *edge_serial);
+
+static void unicode_to_ascii(char *string, int buflen,
+ __le16 *unicode, int unicode_size);
+
+
+/* ************************************************************************ */
+/* ************************************************************************ */
+/* ************************************************************************ */
+/* ************************************************************************ */
/************************************************************************
* *
@@ -280,42 +305,43 @@ static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unic
* embedded in this driver *
* *
************************************************************************/
-static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial)
+static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
{
__u32 BootCurVer;
__u32 BootNewVer;
- __u8 BootMajorVersion;
- __u8 BootMinorVersion;
+ __u8 BootMajorVersion;
+ __u8 BootMinorVersion;
__le16 BootBuildNumber;
- __u8 *BootImage;
+ __u8 *BootImage;
__u32 BootSize;
struct edge_firmware_image_record *record;
unsigned char *firmware;
int response;
-
switch (edge_serial->product_info.iDownloadFile) {
- case EDGE_DOWNLOAD_FILE_I930:
- BootMajorVersion = BootCodeImageVersion_GEN1.MajorVersion;
- BootMinorVersion = BootCodeImageVersion_GEN1.MinorVersion;
- BootBuildNumber = cpu_to_le16(BootCodeImageVersion_GEN1.BuildNumber);
- BootImage = &BootCodeImage_GEN1[0];
- BootSize = sizeof( BootCodeImage_GEN1 );
- break;
+ case EDGE_DOWNLOAD_FILE_I930:
+ BootMajorVersion = BootCodeImageVersion_GEN1.MajorVersion;
+ BootMinorVersion = BootCodeImageVersion_GEN1.MinorVersion;
+ BootBuildNumber =
+ cpu_to_le16(BootCodeImageVersion_GEN1.BuildNumber);
+ BootImage = &BootCodeImage_GEN1[0];
+ BootSize = sizeof(BootCodeImage_GEN1);
+ break;
- case EDGE_DOWNLOAD_FILE_80251:
- BootMajorVersion = BootCodeImageVersion_GEN2.MajorVersion;
- BootMinorVersion = BootCodeImageVersion_GEN2.MinorVersion;
- BootBuildNumber = cpu_to_le16(BootCodeImageVersion_GEN2.BuildNumber);
- BootImage = &BootCodeImage_GEN2[0];
- BootSize = sizeof( BootCodeImage_GEN2 );
- break;
+ case EDGE_DOWNLOAD_FILE_80251:
+ BootMajorVersion = BootCodeImageVersion_GEN2.MajorVersion;
+ BootMinorVersion = BootCodeImageVersion_GEN2.MinorVersion;
+ BootBuildNumber =
+ cpu_to_le16(BootCodeImageVersion_GEN2.BuildNumber);
+ BootImage = &BootCodeImage_GEN2[0];
+ BootSize = sizeof(BootCodeImage_GEN2);
+ break;
- default:
- return;
+ default:
+ return;
}
- // Check Boot Image Version
+ /* Check Boot Image Version */
BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) +
(edge_serial->boot_descriptor.MinorVersion << 16) +
le16_to_cpu(edge_serial->boot_descriptor.BuildNumber);
@@ -346,19 +372,26 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial)
for (;;) {
record = (struct edge_firmware_image_record *)firmware;
- response = rom_write (edge_serial->serial, le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len), &record->Data[0]);
+ response = rom_write(edge_serial->serial,
+ le16_to_cpu(record->ExtAddr),
+ le16_to_cpu(record->Addr),
+ le16_to_cpu(record->Len),
+ &record->Data[0]);
if (response < 0) {
- dev_err(&edge_serial->serial->dev->dev, "rom_write failed (%x, %x, %d)\n", le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len));
+ dev_err(&edge_serial->serial->dev->dev,
+ "rom_write failed (%x, %x, %d)\n",
+ le16_to_cpu(record->ExtAddr),
+ le16_to_cpu(record->Addr),
+ le16_to_cpu(record->Len));
break;
}
- firmware += sizeof (struct edge_firmware_image_record) + le16_to_cpu(record->Len);
- if (firmware >= &BootImage[BootSize]) {
+ firmware += sizeof(struct edge_firmware_image_record)
+ + le16_to_cpu(record->Len);
+ if (firmware >= &BootImage[BootSize])
break;
- }
}
- } else {
+ } else
dbg("Boot Image -- already up to date");
- }
}
@@ -367,29 +400,29 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial)
* Get string descriptor from device *
* *
************************************************************************/
-static int get_string (struct usb_device *dev, int Id, char *string, int buflen)
+static int get_string(struct usb_device *dev, int Id, char *string, int buflen)
{
struct usb_string_descriptor StringDesc;
struct usb_string_descriptor *pStringDesc;
- dbg("%s - USB String ID = %d", __func__, Id );
+ dbg("%s - USB String ID = %d", __func__, Id);
- if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
+ if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
+ &StringDesc, sizeof(StringDesc)))
return 0;
- }
-
- pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL);
- if (!pStringDesc) {
+ pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
+ if (!pStringDesc)
return 0;
- }
- if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) {
+ if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
+ pStringDesc, StringDesc.bLength)) {
kfree(pStringDesc);
return 0;
}
- unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2);
+ unicode_to_ascii(string, buflen,
+ pStringDesc->wData, pStringDesc->bLength/2);
kfree(pStringDesc);
dbg("%s - USB String %s", __func__, string);
@@ -403,24 +436,24 @@ static int get_string (struct usb_device *dev, int Id, char *string, int buflen)
* Get string descriptor from device
*
************************************************************************/
-static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_descriptor **pRetDesc)
+static int get_string_desc(struct usb_device *dev, int Id,
+ struct usb_string_descriptor **pRetDesc)
{
struct usb_string_descriptor StringDesc;
struct usb_string_descriptor *pStringDesc;
- dbg("%s - USB String ID = %d", __func__, Id );
+ dbg("%s - USB String ID = %d", __func__, Id);
- if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
+ if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc,
+ sizeof(StringDesc)))
return 0;
- }
-
- pStringDesc = kmalloc (StringDesc.bLength, GFP_KERNEL);
- if (!pStringDesc) {
+ pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
+ if (!pStringDesc)
return -1;
- }
- if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, StringDesc.bLength )) {
+ if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc,
+ StringDesc.bLength)) {
kfree(pStringDesc);
return -1;
}
@@ -432,28 +465,30 @@ static int get_string_desc (struct usb_device *dev, int Id, struct usb_string_de
static void dump_product_info(struct edgeport_product_info *product_info)
{
- // Dump Product Info structure
+ /* Dump Product Info structure */
dbg("**Product Information:");
- dbg(" ProductId %x", product_info->ProductId );
- dbg(" NumPorts %d", product_info->NumPorts );
- dbg(" ProdInfoVer %d", product_info->ProdInfoVer );
+ dbg(" ProductId %x", product_info->ProductId);
+ dbg(" NumPorts %d", product_info->NumPorts);
+ dbg(" ProdInfoVer %d", product_info->ProdInfoVer);
dbg(" IsServer %d", product_info->IsServer);
- dbg(" IsRS232 %d", product_info->IsRS232 );
- dbg(" IsRS422 %d", product_info->IsRS422 );
- dbg(" IsRS485 %d", product_info->IsRS485 );
- dbg(" RomSize %d", product_info->RomSize );
- dbg(" RamSize %d", product_info->RamSize );
- dbg(" CpuRev %x", product_info->CpuRev );
+ dbg(" IsRS232 %d", product_info->IsRS232);
+ dbg(" IsRS422 %d", product_info->IsRS422);
+ dbg(" IsRS485 %d", product_info->IsRS485);
+ dbg(" RomSize %d", product_info->RomSize);
+ dbg(" RamSize %d", product_info->RamSize);
+ dbg(" CpuRev %x", product_info->CpuRev);
dbg(" BoardRev %x", product_info->BoardRev);
dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion,
product_info->BootMinorVersion,
le16_to_cpu(product_info->BootBuildNumber));
- dbg(" FirmwareMajorVersion %d.%d.%d", product_info->FirmwareMajorVersion,
- product_info->FirmwareMinorVersion,
- le16_to_cpu(product_info->FirmwareBuildNumber));
- dbg(" ManufactureDescDate %d/%d/%d", product_info->ManufactureDescDate[0],
- product_info->ManufactureDescDate[1],
- product_info->ManufactureDescDate[2]+1900);
+ dbg(" FirmwareMajorVersion %d.%d.%d",
+ product_info->FirmwareMajorVersion,
+ product_info->FirmwareMinorVersion,
+ le16_to_cpu(product_info->FirmwareBuildNumber));
+ dbg(" ManufactureDescDate %d/%d/%d",
+ product_info->ManufactureDescDate[0],
+ product_info->ManufactureDescDate[1],
+ product_info->ManufactureDescDate[2]+1900);
dbg(" iDownloadFile 0x%x", product_info->iDownloadFile);
dbg(" EpicVer %d", product_info->EpicVer);
}
@@ -462,61 +497,73 @@ static void get_product_info(struct edgeport_serial *edge_serial)
{
struct edgeport_product_info *product_info = &edge_serial->product_info;
- memset (product_info, 0, sizeof(struct edgeport_product_info));
-
- product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
- product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts;
- product_info->ProdInfoVer = 0;
-
- product_info->RomSize = edge_serial->manuf_descriptor.RomSize;
- product_info->RamSize = edge_serial->manuf_descriptor.RamSize;
- product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev;
- product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev;
-
- product_info->BootMajorVersion = edge_serial->boot_descriptor.MajorVersion;
- product_info->BootMinorVersion = edge_serial->boot_descriptor.MinorVersion;
- product_info->BootBuildNumber = edge_serial->boot_descriptor.BuildNumber;
-
- memcpy(product_info->ManufactureDescDate, edge_serial->manuf_descriptor.DescDate, sizeof(edge_serial->manuf_descriptor.DescDate));
-
- // check if this is 2nd generation hardware
- if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ION_DEVICE_ID_80251_NETCHIP) {
- product_info->FirmwareMajorVersion = OperationalCodeImageVersion_GEN2.MajorVersion;
- product_info->FirmwareMinorVersion = OperationalCodeImageVersion_GEN2.MinorVersion;
- product_info->FirmwareBuildNumber = cpu_to_le16(OperationalCodeImageVersion_GEN2.BuildNumber);
- product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
+ memset(product_info, 0, sizeof(struct edgeport_product_info));
+
+ product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP);
+ product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts;
+ product_info->ProdInfoVer = 0;
+
+ product_info->RomSize = edge_serial->manuf_descriptor.RomSize;
+ product_info->RamSize = edge_serial->manuf_descriptor.RamSize;
+ product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev;
+ product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev;
+
+ product_info->BootMajorVersion =
+ edge_serial->boot_descriptor.MajorVersion;
+ product_info->BootMinorVersion =
+ edge_serial->boot_descriptor.MinorVersion;
+ product_info->BootBuildNumber =
+ edge_serial->boot_descriptor.BuildNumber;
+
+ memcpy(product_info->ManufactureDescDate,
+ edge_serial->manuf_descriptor.DescDate,
+ sizeof(edge_serial->manuf_descriptor.DescDate));
+
+ /* check if this is 2nd generation hardware */
+ if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct)
+ & ION_DEVICE_ID_80251_NETCHIP) {
+ product_info->FirmwareMajorVersion =
+ OperationalCodeImageVersion_GEN2.MajorVersion;
+ product_info->FirmwareMinorVersion =
+ OperationalCodeImageVersion_GEN2.MinorVersion;
+ product_info->FirmwareBuildNumber =
+ cpu_to_le16(OperationalCodeImageVersion_GEN2.BuildNumber);
+ product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
} else {
- product_info->FirmwareMajorVersion = OperationalCodeImageVersion_GEN1.MajorVersion;
- product_info->FirmwareMinorVersion = OperationalCodeImageVersion_GEN1.MinorVersion;
- product_info->FirmwareBuildNumber = cpu_to_le16(OperationalCodeImageVersion_GEN1.BuildNumber);
- product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
+ product_info->FirmwareMajorVersion =
+ OperationalCodeImageVersion_GEN1.MajorVersion;
+ product_info->FirmwareMinorVersion =
+ OperationalCodeImageVersion_GEN1.MinorVersion;
+ product_info->FirmwareBuildNumber =
+ cpu_to_le16(OperationalCodeImageVersion_GEN1.BuildNumber);
+ product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
}
- // Determine Product type and set appropriate flags
+ /* Determine Product type and set appropriate flags */
switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
- case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
- case ION_DEVICE_ID_EDGEPORT_4T:
- case ION_DEVICE_ID_EDGEPORT_4:
- case ION_DEVICE_ID_EDGEPORT_2:
- case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
- case ION_DEVICE_ID_EDGEPORT_8:
- case ION_DEVICE_ID_EDGEPORT_421:
- case ION_DEVICE_ID_EDGEPORT_21:
- case ION_DEVICE_ID_EDGEPORT_2_DIN:
- case ION_DEVICE_ID_EDGEPORT_4_DIN:
- case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
- product_info->IsRS232 = 1;
- break;
+ case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
+ case ION_DEVICE_ID_EDGEPORT_4T:
+ case ION_DEVICE_ID_EDGEPORT_4:
+ case ION_DEVICE_ID_EDGEPORT_2:
+ case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU:
+ case ION_DEVICE_ID_EDGEPORT_8:
+ case ION_DEVICE_ID_EDGEPORT_421:
+ case ION_DEVICE_ID_EDGEPORT_21:
+ case ION_DEVICE_ID_EDGEPORT_2_DIN:
+ case ION_DEVICE_ID_EDGEPORT_4_DIN:
+ case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU:
+ product_info->IsRS232 = 1;
+ break;
- case ION_DEVICE_ID_EDGEPORT_2I: // Edgeport/2 RS422/RS485
- product_info->IsRS422 = 1;
- product_info->IsRS485 = 1;
- break;
+ case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */
+ product_info->IsRS422 = 1;
+ product_info->IsRS485 = 1;
+ break;
- case ION_DEVICE_ID_EDGEPORT_8I: // Edgeport/4 RS422
- case ION_DEVICE_ID_EDGEPORT_4I: // Edgeport/4 RS422
- product_info->IsRS422 = 1;
- break;
+ case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */
+ case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */
+ product_info->IsRS422 = 1;
+ break;
}
dump_product_info(product_info);
@@ -544,32 +591,32 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
ep->is_epic = 1;
memset(product_info, 0, sizeof(struct edgeport_product_info));
- product_info->NumPorts = epic->NumPorts;
- product_info->ProdInfoVer = 0;
- product_info->FirmwareMajorVersion = epic->MajorVersion;
- product_info->FirmwareMinorVersion = epic->MinorVersion;
- product_info->FirmwareBuildNumber = epic->BuildNumber;
- product_info->iDownloadFile = epic->iDownloadFile;
- product_info->EpicVer = epic->EpicVer;
- product_info->Epic = epic->Supports;
- product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
+ product_info->NumPorts = epic->NumPorts;
+ product_info->ProdInfoVer = 0;
+ product_info->FirmwareMajorVersion = epic->MajorVersion;
+ product_info->FirmwareMinorVersion = epic->MinorVersion;
+ product_info->FirmwareBuildNumber = epic->BuildNumber;
+ product_info->iDownloadFile = epic->iDownloadFile;
+ product_info->EpicVer = epic->EpicVer;
+ product_info->Epic = epic->Supports;
+ product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
dump_product_info(product_info);
bits = &ep->epic_descriptor.Supports;
dbg("**EPIC descriptor:");
dbg(" VendEnableSuspend: %s", bits->VendEnableSuspend ? "TRUE": "FALSE");
- dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE" );
- dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE" );
- dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE" );
- dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE" );
- dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE" );
- dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE" );
- dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE" );
- dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE" );
- dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE" );
- dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE" );
- dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE" );
- dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE" );
+ dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE");
+ dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE");
+ dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE");
+ dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE");
+ dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE");
+ dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE");
+ dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE");
+ dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE");
+ dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE");
+ dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE");
+ dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE");
+ dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE");
}
return result;
@@ -585,10 +632,10 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
/*****************************************************************************
* edge_interrupt_callback
- * this is the callback function for when we have received data on the
+ * this is the callback function for when we have received data on the
* interrupt endpoint.
*****************************************************************************/
-static void edge_interrupt_callback (struct urb *urb)
+static void edge_interrupt_callback(struct urb *urb)
{
struct edgeport_serial *edge_serial = urb->context;
struct edgeport_port *edge_port;
@@ -613,17 +660,17 @@ static void edge_interrupt_callback (struct urb *urb)
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __func__, status);
+ __func__, status);
return;
default:
- dbg("%s - nonzero urb status received: %d",
- __func__, status);
+ dbg("%s - nonzero urb status received: %d", __func__, status);
goto exit;
}
- // process this interrupt-read even if there are no ports open
+ /* process this interrupt-read even if there are no ports open */
if (length) {
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data);
+ usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
+ __func__, length, data);
if (length > 1) {
bytes_avail = data[0] | (data[1] << 8);
@@ -637,7 +684,8 @@ static void edge_interrupt_callback (struct urb *urb)
dbg("%s - posting a read", __func__);
edge_serial->read_in_progress = true;
- /* we have pending bytes on the bulk in pipe, send a request */
+ /* we have pending bytes on the
+ bulk in pipe, send a request */
edge_serial->read_urb->dev = edge_serial->serial->dev;
result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (result) {
@@ -651,7 +699,8 @@ static void edge_interrupt_callback (struct urb *urb)
/* grab the txcredits for the ports if available */
position = 2;
portNumber = 0;
- while ((position < length) && (portNumber < edge_serial->serial->num_ports)) {
+ while ((position < length) &&
+ (portNumber < edge_serial->serial->num_ports)) {
txCredits = data[position] | (data[position+1] << 8);
if (txCredits) {
port = edge_serial->serial->port[portNumber];
@@ -660,14 +709,19 @@ static void edge_interrupt_callback (struct urb *urb)
spin_lock(&edge_port->ep_lock);
edge_port->txCredits += txCredits;
spin_unlock(&edge_port->ep_lock);
- dbg("%s - txcredits for port%d = %d", __func__, portNumber, edge_port->txCredits);
+ dbg("%s - txcredits for port%d = %d",
+ __func__, portNumber,
+ edge_port->txCredits);
- /* tell the tty driver that something has changed */
+ /* tell the tty driver that something
+ has changed */
if (edge_port->port->port.tty)
tty_wakeup(edge_port->port->port.tty);
- // Since we have more credit, check if more data can be sent
- send_more_port_data(edge_serial, edge_port);
+ /* Since we have more credit, check
+ if more data can be sent */
+ send_more_port_data(edge_serial,
+ edge_port);
}
}
position += 2;
@@ -676,19 +730,20 @@ static void edge_interrupt_callback (struct urb *urb)
}
exit:
- result = usb_submit_urb (urb, GFP_ATOMIC);
- if (result) {
- dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result);
- }
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - Error %d submitting control urb\n",
+ __func__, result);
}
/*****************************************************************************
* edge_bulk_in_callback
- * this is the callback function for when we have received data on the
+ * this is the callback function for when we have received data on the
* bulk in endpoint.
*****************************************************************************/
-static void edge_bulk_in_callback (struct urb *urb)
+static void edge_bulk_in_callback(struct urb *urb)
{
struct edgeport_serial *edge_serial = urb->context;
unsigned char *data = urb->transfer_buffer;
@@ -713,16 +768,18 @@ static void edge_bulk_in_callback (struct urb *urb)
raw_data_length = urb->actual_length;
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, raw_data_length, data);
+ usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
+ __func__, raw_data_length, data);
spin_lock(&edge_serial->es_lock);
/* decrement our rxBytes available by the number that we just got */
edge_serial->rxBytesAvail -= raw_data_length;
- dbg("%s - Received = %d, rxBytesAvail %d", __func__, raw_data_length, edge_serial->rxBytesAvail);
+ dbg("%s - Received = %d, rxBytesAvail %d", __func__,
+ raw_data_length, edge_serial->rxBytesAvail);
- process_rcvd_data (edge_serial, data, urb->actual_length);
+ process_rcvd_data(edge_serial, data, urb->actual_length);
/* check to see if there's any more data for us to read */
if (edge_serial->rxBytesAvail > 0) {
@@ -745,10 +802,10 @@ static void edge_bulk_in_callback (struct urb *urb)
/*****************************************************************************
* edge_bulk_out_data_callback
- * this is the callback function for when we have finished sending serial data
- * on the bulk out endpoint.
+ * this is the callback function for when we have finished sending
+ * serial data on the bulk out endpoint.
*****************************************************************************/
-static void edge_bulk_out_data_callback (struct urb *urb)
+static void edge_bulk_out_data_callback(struct urb *urb)
{
struct edgeport_port *edge_port = urb->context;
struct tty_struct *tty;
@@ -764,24 +821,26 @@ static void edge_bulk_out_data_callback (struct urb *urb)
tty = edge_port->port->port.tty;
if (tty && edge_port->open) {
- /* let the tty driver wakeup if it has a special write_wakeup function */
+ /* let the tty driver wakeup if it has a special
+ write_wakeup function */
tty_wakeup(tty);
}
- // Release the Write URB
+ /* Release the Write URB */
edge_port->write_in_progress = false;
- // Check if more data needs to be sent
- send_more_port_data((struct edgeport_serial *)(usb_get_serial_data(edge_port->port->serial)), edge_port);
+ /* Check if more data needs to be sent */
+ send_more_port_data((struct edgeport_serial *)
+ (usb_get_serial_data(edge_port->port->serial)), edge_port);
}
/*****************************************************************************
* BulkOutCmdCallback
- * this is the callback function for when we have finished sending a command
- * on the bulk out endpoint.
+ * this is the callback function for when we have finished sending a
+ * command on the bulk out endpoint.
*****************************************************************************/
-static void edge_bulk_out_cmd_callback (struct urb *urb)
+static void edge_bulk_out_cmd_callback(struct urb *urb)
{
struct edgeport_port *edge_port = urb->context;
struct tty_struct *tty;
@@ -790,17 +849,19 @@ static void edge_bulk_out_cmd_callback (struct urb *urb)
dbg("%s", __func__);
atomic_dec(&CmdUrbs);
- dbg("%s - FREE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs));
+ dbg("%s - FREE URB %p (outstanding %d)", __func__,
+ urb, atomic_read(&CmdUrbs));
/* clean up the transfer buffer */
kfree(urb->transfer_buffer);
/* Free the command urb */
- usb_free_urb (urb);
+ usb_free_urb(urb);
if (status) {
- dbg("%s - nonzero write bulk status received: %d", __func__, status);
+ dbg("%s - nonzero write bulk status received: %d",
+ __func__, status);
return;
}
@@ -828,7 +889,7 @@ static void edge_bulk_out_cmd_callback (struct urb *urb)
* Otherwise we return a negative error number.
*****************************************************************************/
static int edge_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file * filp)
+ struct usb_serial_port *port, struct file *filp)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct usb_serial *serial;
@@ -843,51 +904,59 @@ static int edge_open(struct tty_struct *tty,
if (tty)
tty->low_latency = low_latency;
- /* see if we've set up our endpoint info yet (can't set it up in edge_startup
- as the structures were not set up at that time.) */
+ /* see if we've set up our endpoint info yet (can't set it up
+ in edge_startup as the structures were not set up at that time.) */
serial = port->serial;
edge_serial = usb_get_serial_data(serial);
if (edge_serial == NULL)
return -ENODEV;
if (edge_serial->interrupt_in_buffer == NULL) {
struct usb_serial_port *port0 = serial->port[0];
-
+
/* not set up yet, so do it now */
- edge_serial->interrupt_in_buffer = port0->interrupt_in_buffer;
- edge_serial->interrupt_in_endpoint = port0->interrupt_in_endpointAddress;
+ edge_serial->interrupt_in_buffer =
+ port0->interrupt_in_buffer;
+ edge_serial->interrupt_in_endpoint =
+ port0->interrupt_in_endpointAddress;
edge_serial->interrupt_read_urb = port0->interrupt_in_urb;
edge_serial->bulk_in_buffer = port0->bulk_in_buffer;
- edge_serial->bulk_in_endpoint = port0->bulk_in_endpointAddress;
+ edge_serial->bulk_in_endpoint =
+ port0->bulk_in_endpointAddress;
edge_serial->read_urb = port0->read_urb;
- edge_serial->bulk_out_endpoint = port0->bulk_out_endpointAddress;
-
+ edge_serial->bulk_out_endpoint =
+ port0->bulk_out_endpointAddress;
+
/* set up our interrupt urb */
usb_fill_int_urb(edge_serial->interrupt_read_urb,
- serial->dev,
- usb_rcvintpipe(serial->dev,
- port0->interrupt_in_endpointAddress),
- port0->interrupt_in_buffer,
- edge_serial->interrupt_read_urb->transfer_buffer_length,
- edge_interrupt_callback, edge_serial,
- edge_serial->interrupt_read_urb->interval);
-
+ serial->dev,
+ usb_rcvintpipe(serial->dev,
+ port0->interrupt_in_endpointAddress),
+ port0->interrupt_in_buffer,
+ edge_serial->interrupt_read_urb->transfer_buffer_length,
+ edge_interrupt_callback, edge_serial,
+ edge_serial->interrupt_read_urb->interval);
+
/* set up our bulk in urb */
usb_fill_bulk_urb(edge_serial->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev,
- port0->bulk_in_endpointAddress),
- port0->bulk_in_buffer,
- edge_serial->read_urb->transfer_buffer_length,
- edge_bulk_in_callback, edge_serial);
+ usb_rcvbulkpipe(serial->dev,
+ port0->bulk_in_endpointAddress),
+ port0->bulk_in_buffer,
+ edge_serial->read_urb->transfer_buffer_length,
+ edge_bulk_in_callback, edge_serial);
edge_serial->read_in_progress = false;
/* start interrupt read for this edgeport
- * this interrupt will continue as long as the edgeport is connected */
- response = usb_submit_urb (edge_serial->interrupt_read_urb, GFP_KERNEL);
+ * this interrupt will continue as long
+ * as the edgeport is connected */
+ response = usb_submit_urb(edge_serial->interrupt_read_urb,
+ GFP_KERNEL);
if (response) {
- dev_err(&port->dev, "%s - Error %d submitting control urb\n", __func__, response);
+ dev_err(&port->dev,
+ "%s - Error %d submitting control urb\n",
+ __func__, response);
}
}
-
+
/* initialize our wait queues */
init_waitqueue_head(&edge_port->wait_open);
init_waitqueue_head(&edge_port->wait_chase);
@@ -895,26 +964,29 @@ static int edge_open(struct tty_struct *tty,
init_waitqueue_head(&edge_port->wait_command);
/* initialize our icount structure */
- memset (&(edge_port->icount), 0x00, sizeof(edge_port->icount));
+ memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
/* initialize our port settings */
- edge_port->txCredits = 0; /* Can't send any data yet */
- edge_port->shadowMCR = MCR_MASTER_IE; /* Must always set this bit to enable ints! */
+ edge_port->txCredits = 0; /* Can't send any data yet */
+ /* Must always set this bit to enable ints! */
+ edge_port->shadowMCR = MCR_MASTER_IE;
edge_port->chaseResponsePending = false;
/* send a open port command */
edge_port->openPending = true;
edge_port->open = false;
- response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0);
+ response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0);
if (response < 0) {
- dev_err(&port->dev, "%s - error sending open port command\n", __func__);
+ dev_err(&port->dev, "%s - error sending open port command\n",
+ __func__);
edge_port->openPending = false;
return -ENODEV;
}
/* now wait for the port to be completely opened */
- wait_event_timeout(edge_port->wait_open, !edge_port->openPending, OPEN_TIMEOUT);
+ wait_event_timeout(edge_port->wait_open, !edge_port->openPending,
+ OPEN_TIMEOUT);
if (!edge_port->open) {
/* open timed out */
@@ -928,25 +1000,26 @@ static int edge_open(struct tty_struct *tty,
edge_port->txfifo.tail = 0;
edge_port->txfifo.count = 0;
edge_port->txfifo.size = edge_port->maxTxCredits;
- edge_port->txfifo.fifo = kmalloc (edge_port->maxTxCredits, GFP_KERNEL);
+ edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
if (!edge_port->txfifo.fifo) {
dbg("%s - no memory", __func__);
- edge_close (tty, port, filp);
+ edge_close(tty, port, filp);
return -ENOMEM;
}
/* Allocate a URB for the write */
- edge_port->write_urb = usb_alloc_urb (0, GFP_KERNEL);
+ edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
edge_port->write_in_progress = false;
if (!edge_port->write_urb) {
dbg("%s - no memory", __func__);
- edge_close (tty, port, filp);
+ edge_close(tty, port, filp);
return -ENOMEM;
}
- dbg("%s(%d) - Initialize TX fifo to %d bytes", __func__, port->number, edge_port->maxTxCredits);
+ dbg("%s(%d) - Initialize TX fifo to %d bytes",
+ __func__, port->number, edge_port->maxTxCredits);
dbg("%s exited", __func__);
@@ -972,27 +1045,28 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
int loop = 10;
while (1) {
- // Save Last credits
+ /* Save Last credits */
lastCredits = edge_port->txCredits;
- // Did we get our Chase response
+ /* Did we get our Chase response */
if (!edge_port->chaseResponsePending) {
dbg("%s - Got Chase Response", __func__);
- // did we get all of our credit back?
- if (edge_port->txCredits == edge_port->maxTxCredits ) {
+ /* did we get all of our credit back? */
+ if (edge_port->txCredits == edge_port->maxTxCredits) {
dbg("%s - Got all credits", __func__);
return;
}
}
- // Block the thread for a while
- prepare_to_wait(&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE);
+ /* Block the thread for a while */
+ prepare_to_wait(&edge_port->wait_chase, &wait,
+ TASK_UNINTERRUPTIBLE);
schedule_timeout(timeout);
finish_wait(&edge_port->wait_chase, &wait);
if (lastCredits == edge_port->txCredits) {
- // No activity.. count down.
+ /* No activity.. count down. */
loop--;
if (loop == 0) {
edge_port->chaseResponsePending = false;
@@ -1000,8 +1074,9 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
return;
}
} else {
- // Reset timeout value back to 10 seconds
- dbg("%s - Last %d, Current %d", __func__, lastCredits, edge_port->txCredits);
+ /* Reset timeout value back to 10 seconds */
+ dbg("%s - Last %d, Current %d", __func__,
+ lastCredits, edge_port->txCredits);
loop = 10;
}
}
@@ -1018,7 +1093,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
* 3. A timeout of 3 seconds without activity has expired
*
************************************************************************/
-static void block_until_tx_empty (struct edgeport_port *edge_port)
+static void block_until_tx_empty(struct edgeport_port *edge_port)
{
DEFINE_WAIT(wait);
struct TxFifo *fifo = &edge_port->txfifo;
@@ -1027,31 +1102,32 @@ static void block_until_tx_empty (struct edgeport_port *edge_port)
int loop = 30;
while (1) {
- // Save Last count
+ /* Save Last count */
lastCount = fifo->count;
- // Is the Edgeport Buffer empty?
+ /* Is the Edgeport Buffer empty? */
if (lastCount == 0) {
dbg("%s - TX Buffer Empty", __func__);
return;
}
- // Block the thread for a while
- prepare_to_wait (&edge_port->wait_chase, &wait, TASK_UNINTERRUPTIBLE);
+ /* Block the thread for a while */
+ prepare_to_wait(&edge_port->wait_chase, &wait,
+ TASK_UNINTERRUPTIBLE);
schedule_timeout(timeout);
finish_wait(&edge_port->wait_chase, &wait);
dbg("%s wait", __func__);
if (lastCount == fifo->count) {
- // No activity.. count down.
+ /* No activity.. count down. */
loop--;
if (loop == 0) {
dbg("%s - TIMEOUT", __func__);
return;
}
} else {
- // Reset timeout value back to seconds
+ /* Reset timeout value back to seconds */
loop = 30;
}
}
@@ -1063,20 +1139,20 @@ static void block_until_tx_empty (struct edgeport_port *edge_port)
* this function is called by the tty driver when a port is closed
*****************************************************************************/
static void edge_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file * filp)
+ struct usb_serial_port *port, struct file *filp)
{
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
int status;
dbg("%s - port %d", __func__, port->number);
-
+
edge_serial = usb_get_serial_data(port->serial);
edge_port = usb_get_serial_port_data(port);
- if ((edge_serial == NULL) || (edge_port == NULL))
+ if (edge_serial == NULL || edge_port == NULL)
return;
-
- // block until tx is empty
+
+ /* block until tx is empty */
block_until_tx_empty(edge_port);
edge_port->closePending = true;
@@ -1088,13 +1164,12 @@ static void edge_close(struct tty_struct *tty,
edge_port->chaseResponsePending = true;
dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
- status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
- if (status == 0) {
- // block until chase finished
+ status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
+ if (status == 0)
+ /* block until chase finished */
block_until_chase_response(edge_port);
- } else {
+ else
edge_port->chaseResponsePending = false;
- }
}
if ((!edge_serial->is_epic) ||
@@ -1102,10 +1177,10 @@ static void edge_close(struct tty_struct *tty,
(edge_serial->epic_descriptor.Supports.IOSPClose))) {
/* close the port */
dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__);
- send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0);
+ send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
}
- //port->close = true;
+ /* port->close = true; */
edge_port->closePending = false;
edge_port->open = false;
edge_port->openPending = false;
@@ -1113,7 +1188,8 @@ static void edge_close(struct tty_struct *tty,
usb_kill_urb(edge_port->write_urb);
if (edge_port->write_urb) {
- /* if this urb had a transfer buffer already (old transfer) free it */
+ /* if this urb had a transfer buffer already
+ (old transfer) free it */
kfree(edge_port->write_urb->transfer_buffer);
usb_free_urb(edge_port->write_urb);
edge_port->write_urb = NULL;
@@ -1122,14 +1198,14 @@ static void edge_close(struct tty_struct *tty,
edge_port->txfifo.fifo = NULL;
dbg("%s exited", __func__);
-}
+}
/*****************************************************************************
* SerialWrite
- * this function is called by the tty driver when data should be written to
- * the port.
- * If successful, we return the number of bytes written, otherwise we return
- * a negative error number.
+ * this function is called by the tty driver when data should be written
+ * to the port.
+ * If successful, we return the number of bytes written, otherwise we
+ * return a negative error number.
*****************************************************************************/
static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *data, int count)
@@ -1147,66 +1223,76 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
if (edge_port == NULL)
return -ENODEV;
- // get a pointer to the Tx fifo
+ /* get a pointer to the Tx fifo */
fifo = &edge_port->txfifo;
spin_lock_irqsave(&edge_port->ep_lock, flags);
- // calculate number of bytes to put in fifo
- copySize = min ((unsigned int)count, (edge_port->txCredits - fifo->count));
+ /* calculate number of bytes to put in fifo */
+ copySize = min((unsigned int)count,
+ (edge_port->txCredits - fifo->count));
- dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", __func__,
- port->number, count, edge_port->txCredits - fifo->count, copySize);
+ dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes",
+ __func__, port->number, count,
+ edge_port->txCredits - fifo->count, copySize);
- /* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */
+ /* catch writes of 0 bytes which the tty driver likes to give us,
+ and when txCredits is empty */
if (copySize == 0) {
dbg("%s - copySize = Zero", __func__);
goto finish_write;
}
- // queue the data
- // since we can never overflow the buffer we do not have to check for full condition
-
- // the copy is done is two parts -- first fill to the end of the buffer
- // then copy the reset from the start of the buffer
-
+ /* queue the data
+ * since we can never overflow the buffer we do not have to check for a
+ * full condition
+ *
+ * the copy is done is two parts -- first fill to the end of the buffer
+ * then copy the reset from the start of the buffer
+ */
bytesleft = fifo->size - fifo->head;
- firsthalf = min (bytesleft, copySize);
- dbg("%s - copy %d bytes of %d into fifo ", __func__, firsthalf, bytesleft);
+ firsthalf = min(bytesleft, copySize);
+ dbg("%s - copy %d bytes of %d into fifo ", __func__,
+ firsthalf, bytesleft);
/* now copy our data */
memcpy(&fifo->fifo[fifo->head], data, firsthalf);
- usb_serial_debug_data(debug, &port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ firsthalf, &fifo->fifo[fifo->head]);
- // update the index and size
+ /* update the index and size */
fifo->head += firsthalf;
fifo->count += firsthalf;
- // wrap the index
- if (fifo->head == fifo->size) {
+ /* wrap the index */
+ if (fifo->head == fifo->size)
fifo->head = 0;
- }
secondhalf = copySize-firsthalf;
if (secondhalf) {
dbg("%s - copy rest of data %d", __func__, secondhalf);
memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
- usb_serial_debug_data(debug, &port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]);
- // update the index and size
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ secondhalf, &fifo->fifo[fifo->head]);
+ /* update the index and size */
fifo->count += secondhalf;
fifo->head += secondhalf;
- // No need to check for wrap since we can not get to end of fifo in this part
+ /* No need to check for wrap since we can not get to end of
+ * the fifo in this part
+ */
}
finish_write:
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- send_more_port_data((struct edgeport_serial *)usb_get_serial_data(port->serial), edge_port);
+ send_more_port_data((struct edgeport_serial *)
+ usb_get_serial_data(port->serial), edge_port);
- dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, copySize, edge_port->txCredits, fifo->count);
+ dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__,
+ copySize, edge_port->txCredits, fifo->count);
- return copySize;
+ return copySize;
}
@@ -1223,7 +1309,8 @@ finish_write:
* can transmit more.
*
************************************************************************/
-static void send_more_port_data(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port)
+static void send_more_port_data(struct edgeport_serial *edge_serial,
+ struct edgeport_port *edge_port)
{
struct TxFifo *fifo = &edge_port->txfifo;
struct urb *urb;
@@ -1242,67 +1329,78 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge
if (edge_port->write_in_progress ||
!edge_port->open ||
(fifo->count == 0)) {
- dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __func__, edge_port->port->number, fifo->count, edge_port->write_in_progress);
+ dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d",
+ __func__, edge_port->port->number,
+ fifo->count, edge_port->write_in_progress);
goto exit_send;
}
- // since the amount of data in the fifo will always fit into the
- // edgeport buffer we do not need to check the write length
-
- // Do we have enough credits for this port to make it worthwhile
- // to bother queueing a write. If it's too small, say a few bytes,
- // it's better to wait for more credits so we can do a larger
- // write.
- if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits,EDGE_FW_BULK_MAX_PACKET_SIZE)) {
- dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __func__, edge_port->port->number, fifo->count, edge_port->txCredits );
+ /* since the amount of data in the fifo will always fit into the
+ * edgeport buffer we do not need to check the write length
+ *
+ * Do we have enough credits for this port to make it worthwhile
+ * to bother queueing a write. If it's too small, say a few bytes,
+ * it's better to wait for more credits so we can do a larger write.
+ */
+ if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
+ dbg("%s(%d) Not enough credit - fifo %d TxCredit %d",
+ __func__, edge_port->port->number, fifo->count,
+ edge_port->txCredits);
goto exit_send;
}
- // lock this write
+ /* lock this write */
edge_port->write_in_progress = true;
- // get a pointer to the write_urb
+ /* get a pointer to the write_urb */
urb = edge_port->write_urb;
/* make sure transfer buffer is freed */
kfree(urb->transfer_buffer);
urb->transfer_buffer = NULL;
- /* build the data header for the buffer and port that we are about to send out */
+ /* build the data header for the buffer and port that we are about
+ to send out */
count = fifo->count;
- buffer = kmalloc (count+2, GFP_ATOMIC);
+ buffer = kmalloc(count+2, GFP_ATOMIC);
if (buffer == NULL) {
- dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __func__);
+ dev_err(&edge_port->port->dev,
+ "%s - no more kernel memory...\n", __func__);
edge_port->write_in_progress = false;
goto exit_send;
}
- buffer[0] = IOSP_BUILD_DATA_HDR1 (edge_port->port->number - edge_port->port->serial->minor, count);
- buffer[1] = IOSP_BUILD_DATA_HDR2 (edge_port->port->number - edge_port->port->serial->minor, count);
+ buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->number
+ - edge_port->port->serial->minor, count);
+ buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->number
+ - edge_port->port->serial->minor, count);
/* now copy our data */
bytesleft = fifo->size - fifo->tail;
- firsthalf = min (bytesleft, count);
+ firsthalf = min(bytesleft, count);
memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf);
fifo->tail += firsthalf;
fifo->count -= firsthalf;
- if (fifo->tail == fifo->size) {
+ if (fifo->tail == fifo->size)
fifo->tail = 0;
- }
secondhalf = count-firsthalf;
if (secondhalf) {
- memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], secondhalf);
+ memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail],
+ secondhalf);
fifo->tail += secondhalf;
fifo->count -= secondhalf;
}
if (count)
- usb_serial_debug_data(debug, &edge_port->port->dev, __func__, count, &buffer[2]);
+ usb_serial_debug_data(debug, &edge_port->port->dev,
+ __func__, count, &buffer[2]);
/* fill up the urb with all of our data and submit it */
- usb_fill_bulk_urb (urb, edge_serial->serial->dev,
- usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint),
- buffer, count+2, edge_bulk_out_data_callback, edge_port);
+ usb_fill_bulk_urb(urb, edge_serial->serial->dev,
+ usb_sndbulkpipe(edge_serial->serial->dev,
+ edge_serial->bulk_out_endpoint),
+ buffer, count+2,
+ edge_bulk_out_data_callback, edge_port);
/* decrement the number of credits we have by the number we just sent */
edge_port->txCredits -= count;
@@ -1312,14 +1410,17 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
/* something went wrong */
- dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __func__, status);
+ dev_err(&edge_port->port->dev,
+ "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
+ __func__, status);
edge_port->write_in_progress = false;
/* revert the credits as something bad happened. */
edge_port->txCredits += count;
edge_port->icount.tx -= count;
}
- dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __func__, count, edge_port->txCredits, fifo->count);
+ dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d",
+ __func__, count, edge_port->txCredits, fifo->count);
exit_send:
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
@@ -1328,11 +1429,10 @@ exit_send:
/*****************************************************************************
* edge_write_room
- * this function is called by the tty driver when it wants to know how many
- * bytes of data we can accept for a specific port.
- * If successful, we return the amount of room that we have for this port
- * (the txCredits),
- * Otherwise we return a negative error number.
+ * this function is called by the tty driver when it wants to know how
+ * many bytes of data we can accept for a specific port. If successful,
+ * we return the amount of room that we have for this port (the txCredits)
+ * otherwise we return a negative error number.
*****************************************************************************/
static int edge_write_room(struct tty_struct *tty)
{
@@ -1355,7 +1455,7 @@ static int edge_write_room(struct tty_struct *tty)
return -EINVAL;
}
- // total of both buffers is still txCredit
+ /* total of both buffers is still txCredit */
spin_lock_irqsave(&edge_port->ep_lock, flags);
room = edge_port->txCredits - edge_port->txfifo.count;
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
@@ -1367,11 +1467,11 @@ static int edge_write_room(struct tty_struct *tty)
/*****************************************************************************
* edge_chars_in_buffer
- * this function is called by the tty driver when it wants to know how many
- * bytes of data we currently have outstanding in the port (data that has
- * been written, but hasn't made it out the port yet)
- * If successful, we return the number of bytes left to be written in the
- * system,
+ * this function is called by the tty driver when it wants to know how
+ * many bytes of data we currently have outstanding in the port (data that
+ * has been written, but hasn't made it out the port yet)
+ * If successful, we return the number of bytes left to be written in the
+ * system,
* Otherwise we return a negative error number.
*****************************************************************************/
static int edge_chars_in_buffer(struct tty_struct *tty)
@@ -1394,10 +1494,12 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
}
spin_lock_irqsave(&edge_port->ep_lock, flags);
- num_chars = edge_port->maxTxCredits - edge_port->txCredits + edge_port->txfifo.count;
+ num_chars = edge_port->maxTxCredits - edge_port->txCredits +
+ edge_port->txfifo.count;
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
if (num_chars) {
- dbg("%s(port %d) - returns %d", __func__, port->number, num_chars);
+ dbg("%s(port %d) - returns %d", __func__,
+ port->number, num_chars);
}
return num_chars;
@@ -1428,19 +1530,18 @@ static void edge_throttle(struct tty_struct *tty)
/* if we are implementing XON/XOFF, send the stop character */
if (I_IXOFF(tty)) {
unsigned char stop_char = STOP_CHAR(tty);
- status = edge_write (tty, port, &stop_char, 1);
- if (status <= 0) {
+ status = edge_write(tty, port, &stop_char, 1);
+ if (status <= 0)
return;
- }
}
/* if we are implementing RTS/CTS, toggle that line */
if (tty->termios->c_cflag & CRTSCTS) {
edge_port->shadowMCR &= ~MCR_RTS;
- status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
- if (status != 0) {
+ status = send_cmd_write_uart_register(edge_port, MCR,
+ edge_port->shadowMCR);
+ if (status != 0)
return;
- }
}
return;
@@ -1449,8 +1550,8 @@ static void edge_throttle(struct tty_struct *tty)
/*****************************************************************************
* edge_unthrottle
- * this function is called by the tty driver when it wants to resume the data
- * being read from the port (called after SerialThrottle is called)
+ * this function is called by the tty driver when it wants to resume the
+ * data being read from the port (called after SerialThrottle is called)
*****************************************************************************/
static void edge_unthrottle(struct tty_struct *tty)
{
@@ -1478,14 +1579,16 @@ static void edge_unthrottle(struct tty_struct *tty)
/* if we are implementing RTS/CTS, toggle that line */
if (tty->termios->c_cflag & CRTSCTS) {
edge_port->shadowMCR |= MCR_RTS;
- send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
+ send_cmd_write_uart_register(edge_port, MCR,
+ edge_port->shadowMCR);
}
}
/*****************************************************************************
* SerialSetTermios
- * this function is called by the tty driver when it wants to change the termios structure
+ * this function is called by the tty driver when it wants to change
+ * the termios structure
*****************************************************************************/
static void edge_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
@@ -1522,9 +1625,10 @@ static void edge_set_termios(struct tty_struct *tty,
* release the bus after transmitting. This must be done when
* the transmit shift register is empty, not be done when the
* transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
+ * allows an RS485 driver to be written in user space.
*****************************************************************************/
-static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *value)
+static int get_lsr_info(struct edgeport_port *edge_port,
+ unsigned int __user *value)
{
unsigned int result = 0;
unsigned long flags;
@@ -1542,7 +1646,8 @@ static int get_lsr_info(struct edgeport_port *edge_port, unsigned int __user *va
return 0;
}
-static int edge_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear)
+static int edge_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
@@ -1597,7 +1702,8 @@ static int edge_tiocmget(struct tty_struct *tty, struct file *file)
return result;
}
-static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo)
+static int get_serial_info(struct edgeport_port *edge_port,
+ struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
@@ -1640,60 +1746,61 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
- case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
- return get_lsr_info(edge_port, (unsigned int __user *) arg);
-
- case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
- return get_serial_info(edge_port, (struct serial_struct __user *) arg);
-
- case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
- cprev = edge_port->icount;
- while (1) {
- prepare_to_wait(&edge_port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE);
- schedule();
- finish_wait(&edge_port->delta_msr_wait, &wait);
- /* see if a signal did it */
- if (signal_pending(current))
- return -ERESTARTSYS;
- cnow = edge_port->icount;
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
- if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
- return 0;
- }
- cprev = cnow;
+ case TIOCSERGETLSR:
+ dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
+ return get_lsr_info(edge_port, (unsigned int __user *) arg);
+
+ case TIOCGSERIAL:
+ dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
+ return get_serial_info(edge_port, (struct serial_struct __user *) arg);
+
+ case TIOCMIWAIT:
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
+ cprev = edge_port->icount;
+ while (1) {
+ prepare_to_wait(&edge_port->delta_msr_wait,
+ &wait, TASK_INTERRUPTIBLE);
+ schedule();
+ finish_wait(&edge_port->delta_msr_wait, &wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ cnow = edge_port->icount;
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+ return 0;
}
- /* NOTREACHED */
- break;
+ cprev = cnow;
+ }
+ /* NOTREACHED */
+ break;
- case TIOCGICOUNT:
- cnow = edge_port->icount;
- memset(&icount, 0, sizeof(icount));
- icount.cts = cnow.cts;
- icount.dsr = cnow.dsr;
- icount.rng = cnow.rng;
- icount.dcd = cnow.dcd;
- icount.rx = cnow.rx;
- icount.tx = cnow.tx;
- icount.frame = cnow.frame;
- icount.overrun = cnow.overrun;
- icount.parity = cnow.parity;
- icount.brk = cnow.brk;
- icount.buf_overrun = cnow.buf_overrun;
-
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, icount.rx, icount.tx );
- if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
- return -EFAULT;
- return 0;
+ case TIOCGICOUNT:
+ cnow = edge_port->icount;
+ memset(&icount, 0, sizeof(icount));
+ icount.cts = cnow.cts;
+ icount.dsr = cnow.dsr;
+ icount.rng = cnow.rng;
+ icount.dcd = cnow.dcd;
+ icount.rx = cnow.rx;
+ icount.tx = cnow.tx;
+ icount.frame = cnow.frame;
+ icount.overrun = cnow.overrun;
+ icount.parity = cnow.parity;
+ icount.brk = cnow.brk;
+ icount.buf_overrun = cnow.buf_overrun;
+
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
+ __func__, port->number, icount.rx, icount.tx);
+ if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
+ return -EFAULT;
+ return 0;
}
-
return -ENOIOCTLCMD;
}
@@ -1702,7 +1809,7 @@ static int edge_ioctl(struct tty_struct *tty, struct file *file,
* SerialBreak
* this function sends a break to the port
*****************************************************************************/
-static void edge_break (struct tty_struct *tty, int break_state)
+static void edge_break(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
@@ -1716,9 +1823,9 @@ static void edge_break (struct tty_struct *tty, int break_state)
edge_port->chaseResponsePending = true;
dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
- status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
+ status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
if (status == 0) {
- // block until chase finished
+ /* block until chase finished */
block_until_chase_response(edge_port);
} else {
edge_port->chaseResponsePending = false;
@@ -1730,14 +1837,16 @@ static void edge_break (struct tty_struct *tty, int break_state)
(edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
if (break_state == -1) {
dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__);
- status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0);
+ status = send_iosp_ext_cmd(edge_port,
+ IOSP_CMD_SET_BREAK, 0);
} else {
dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__);
- status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0);
- }
- if (status) {
- dbg("%s - error sending break set/clear command.", __func__);
+ status = send_iosp_ext_cmd(edge_port,
+ IOSP_CMD_CLEAR_BREAK, 0);
}
+ if (status)
+ dbg("%s - error sending break set/clear command.",
+ __func__);
}
return;
@@ -1748,7 +1857,8 @@ static void edge_break (struct tty_struct *tty, int break_state)
* process_rcvd_data
* this function handles the data received on the bulk in pipe.
*****************************************************************************/
-static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char * buffer, __u16 bufferLength)
+static void process_rcvd_data(struct edgeport_serial *edge_serial,
+ unsigned char *buffer, __u16 bufferLength)
{
struct usb_serial_port *port;
struct edgeport_port *edge_port;
@@ -1769,105 +1879,123 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha
lastBufferLength = bufferLength;
switch (edge_serial->rxState) {
- case EXPECT_HDR1:
- edge_serial->rxHeader1 = *buffer;
- ++buffer;
- --bufferLength;
+ case EXPECT_HDR1:
+ edge_serial->rxHeader1 = *buffer;
+ ++buffer;
+ --bufferLength;
- if (bufferLength == 0) {
- edge_serial->rxState = EXPECT_HDR2;
+ if (bufferLength == 0) {
+ edge_serial->rxState = EXPECT_HDR2;
+ break;
+ }
+ /* otherwise, drop on through */
+ case EXPECT_HDR2:
+ edge_serial->rxHeader2 = *buffer;
+ ++buffer;
+ --bufferLength;
+
+ dbg("%s - Hdr1=%02X Hdr2=%02X", __func__,
+ edge_serial->rxHeader1, edge_serial->rxHeader2);
+ /* Process depending on whether this header is
+ * data or status */
+
+ if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
+ /* Decode this status header and go to
+ * EXPECT_HDR1 (if we can process the status
+ * with only 2 bytes), or go to EXPECT_HDR3 to
+ * get the third byte. */
+ edge_serial->rxPort =
+ IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
+ edge_serial->rxStatusCode =
+ IOSP_GET_STATUS_CODE(
+ edge_serial->rxHeader1);
+
+ if (!IOSP_STATUS_IS_2BYTE(
+ edge_serial->rxStatusCode)) {
+ /* This status needs additional bytes.
+ * Save what we have and then wait for
+ * more data.
+ */
+ edge_serial->rxStatusParam
+ = edge_serial->rxHeader2;
+ edge_serial->rxState = EXPECT_HDR3;
break;
}
- /* otherwise, drop on through */
-
- case EXPECT_HDR2:
- edge_serial->rxHeader2 = *buffer;
- ++buffer;
- --bufferLength;
-
- dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, edge_serial->rxHeader1, edge_serial->rxHeader2);
-
- // Process depending on whether this header is
- // data or status
-
- if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) {
- // Decode this status header and goto EXPECT_HDR1 (if we
- // can process the status with only 2 bytes), or goto
- // EXPECT_HDR3 to get the third byte.
-
- edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
- edge_serial->rxStatusCode = IOSP_GET_STATUS_CODE(edge_serial->rxHeader1);
-
- if (!IOSP_STATUS_IS_2BYTE(edge_serial->rxStatusCode)) {
- // This status needs additional bytes. Save what we have
- // and then wait for more data.
- edge_serial->rxStatusParam = edge_serial->rxHeader2;
-
- edge_serial->rxState = EXPECT_HDR3;
- break;
- }
+ /* We have all the header bytes, process the
+ status now */
+ process_rcvd_status(edge_serial,
+ edge_serial->rxHeader2, 0);
+ edge_serial->rxState = EXPECT_HDR1;
+ break;
+ } else {
+ edge_serial->rxPort =
+ IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
+ edge_serial->rxBytesRemaining =
+ IOSP_GET_HDR_DATA_LEN(
+ edge_serial->rxHeader1,
+ edge_serial->rxHeader2);
+ dbg("%s - Data for Port %u Len %u",
+ __func__,
+ edge_serial->rxPort,
+ edge_serial->rxBytesRemaining);
+
+ /* ASSERT(DevExt->RxPort < DevExt->NumPorts);
+ * ASSERT(DevExt->RxBytesRemaining <
+ * IOSP_MAX_DATA_LENGTH);
+ */
- // We have all the header bytes, process the status now
- process_rcvd_status (edge_serial, edge_serial->rxHeader2, 0);
- edge_serial->rxState = EXPECT_HDR1;
+ if (bufferLength == 0) {
+ edge_serial->rxState = EXPECT_DATA;
break;
- } else {
- edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
- edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1, edge_serial->rxHeader2);
-
- dbg("%s - Data for Port %u Len %u", __func__, edge_serial->rxPort, edge_serial->rxBytesRemaining);
-
- //ASSERT( DevExt->RxPort < DevExt->NumPorts );
- //ASSERT( DevExt->RxBytesRemaining < IOSP_MAX_DATA_LENGTH );
-
- if (bufferLength == 0 ) {
- edge_serial->rxState = EXPECT_DATA;
- break;
- }
- // Else, drop through
}
+ /* Else, drop through */
+ }
+ case EXPECT_DATA: /* Expect data */
+ if (bufferLength < edge_serial->rxBytesRemaining) {
+ rxLen = bufferLength;
+ /* Expect data to start next buffer */
+ edge_serial->rxState = EXPECT_DATA;
+ } else {
+ /* BufLen >= RxBytesRemaining */
+ rxLen = edge_serial->rxBytesRemaining;
+ /* Start another header next time */
+ edge_serial->rxState = EXPECT_HDR1;
+ }
- case EXPECT_DATA: // Expect data
-
- if (bufferLength < edge_serial->rxBytesRemaining) {
- rxLen = bufferLength;
- edge_serial->rxState = EXPECT_DATA; // Expect data to start next buffer
- } else {
- // BufLen >= RxBytesRemaining
- rxLen = edge_serial->rxBytesRemaining;
- edge_serial->rxState = EXPECT_HDR1; // Start another header next time
- }
+ bufferLength -= rxLen;
+ edge_serial->rxBytesRemaining -= rxLen;
- bufferLength -= rxLen;
- edge_serial->rxBytesRemaining -= rxLen;
-
- /* spit this data back into the tty driver if this port is open */
- if (rxLen) {
- port = edge_serial->serial->port[edge_serial->rxPort];
- edge_port = usb_get_serial_port_data(port);
- if (edge_port->open) {
- tty = edge_port->port->port.tty;
- if (tty) {
- dbg("%s - Sending %d bytes to TTY for port %d", __func__, rxLen, edge_serial->rxPort);
- edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
- }
- edge_port->icount.rx += rxLen;
+ /* spit this data back into the tty driver if this
+ port is open */
+ if (rxLen) {
+ port = edge_serial->serial->port[
+ edge_serial->rxPort];
+ edge_port = usb_get_serial_port_data(port);
+ if (edge_port->open) {
+ tty = edge_port->port->port.tty;
+ if (tty) {
+ dbg("%s - Sending %d bytes to TTY for port %d",
+ __func__, rxLen, edge_serial->rxPort);
+ edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
}
- buffer += rxLen;
+ edge_port->icount.rx += rxLen;
}
+ buffer += rxLen;
+ }
+ break;
- break;
-
- case EXPECT_HDR3: // Expect 3rd byte of status header
- edge_serial->rxHeader3 = *buffer;
- ++buffer;
- --bufferLength;
-
- // We have all the header bytes, process the status now
- process_rcvd_status (edge_serial, edge_serial->rxStatusParam, edge_serial->rxHeader3);
- edge_serial->rxState = EXPECT_HDR1;
- break;
-
+ case EXPECT_HDR3: /* Expect 3rd byte of status header */
+ edge_serial->rxHeader3 = *buffer;
+ ++buffer;
+ --bufferLength;
+
+ /* We have all the header bytes, process the
+ status now */
+ process_rcvd_status(edge_serial,
+ edge_serial->rxStatusParam,
+ edge_serial->rxHeader3);
+ edge_serial->rxState = EXPECT_HDR1;
+ break;
}
}
}
@@ -1875,9 +2003,11 @@ static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned cha
/*****************************************************************************
* process_rcvd_status
- * this function handles the any status messages received on the bulk in pipe.
+ * this function handles the any status messages received on the
+ * bulk in pipe.
*****************************************************************************/
-static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3)
+static void process_rcvd_status(struct edgeport_serial *edge_serial,
+ __u8 byte2, __u8 byte3)
{
struct usb_serial_port *port;
struct edgeport_port *edge_port;
@@ -1887,7 +2017,9 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
port = edge_serial->serial->port[edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
if (edge_port == NULL) {
- dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __func__, edge_serial->rxPort);
+ dev_err(&edge_serial->serial->dev->dev,
+ "%s - edge_port == NULL for port %d\n",
+ __func__, edge_serial->rxPort);
return;
}
@@ -1895,22 +2027,28 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
if (code == IOSP_EXT_STATUS) {
switch (byte2) {
- case IOSP_EXT_STATUS_CHASE_RSP:
- // we want to do EXT status regardless of port open/closed
- dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __func__, edge_serial->rxPort, byte3 );
- // Currently, the only EXT_STATUS is Chase, so process here instead of one more call
- // to one more subroutine. If/when more EXT_STATUS, there'll be more work to do.
- // Also, we currently clear flag and close the port regardless of content of above's Byte3.
- // We could choose to do something else when Byte3 says Timeout on Chase from Edgeport,
- // like wait longer in block_until_chase_response, but for now we don't.
- edge_port->chaseResponsePending = false;
- wake_up (&edge_port->wait_chase);
- return;
+ case IOSP_EXT_STATUS_CHASE_RSP:
+ /* we want to do EXT status regardless of port
+ * open/closed */
+ dbg("%s - Port %u EXT CHASE_RSP Data = %02x",
+ __func__, edge_serial->rxPort, byte3);
+ /* Currently, the only EXT_STATUS is Chase, so process
+ * here instead of one more call to one more subroutine
+ * If/when more EXT_STATUS, there'll be more work to do
+ * Also, we currently clear flag and close the port
+ * regardless of content of above's Byte3.
+ * We could choose to do something else when Byte3 says
+ * Timeout on Chase from Edgeport, like wait longer in
+ * block_until_chase_response, but for now we don't.
+ */
+ edge_port->chaseResponsePending = false;
+ wake_up(&edge_port->wait_chase);
+ return;
- case IOSP_EXT_STATUS_RX_CHECK_RSP:
- dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3 );
- //Port->RxCheckRsp = true;
- return;
+ case IOSP_EXT_STATUS_RX_CHECK_RSP:
+ dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3);
+ /* Port->RxCheckRsp = true; */
+ return;
}
}
@@ -1918,12 +2056,14 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
edge_port->maxTxCredits = edge_port->txCredits;
dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
- handle_new_msr (edge_port, byte2);
+ handle_new_msr(edge_port, byte2);
- /* send the current line settings to the port so we are in sync with any further termios calls */
+ /* send the current line settings to the port so we are
+ in sync with any further termios calls */
/* FIXME: locking on tty */
if (edge_port->port->port.tty)
- change_port_settings(edge_port->port->port.tty, edge_port, edge_port->port->port.tty->termios);
+ change_port_settings(edge_port->port->port.tty,
+ edge_port, edge_port->port->port.tty->termios);
/* we have completed the open */
edge_port->openPending = false;
@@ -1932,45 +2072,49 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
return;
}
- // If port is closed, silently discard all rcvd status. We can
- // have cases where buffered status is received AFTER the close
- // port command is sent to the Edgeport.
- if (!edge_port->open || edge_port->closePending) {
+ /* If port is closed, silently discard all rcvd status. We can
+ * have cases where buffered status is received AFTER the close
+ * port command is sent to the Edgeport.
+ */
+ if (!edge_port->open || edge_port->closePending)
return;
- }
switch (code) {
- // Not currently sent by Edgeport
- case IOSP_STATUS_LSR:
- dbg("%s - Port %u LSR Status = %02x", __func__, edge_serial->rxPort, byte2);
- handle_new_lsr(edge_port, false, byte2, 0);
- break;
+ /* Not currently sent by Edgeport */
+ case IOSP_STATUS_LSR:
+ dbg("%s - Port %u LSR Status = %02x",
+ __func__, edge_serial->rxPort, byte2);
+ handle_new_lsr(edge_port, false, byte2, 0);
+ break;
- case IOSP_STATUS_LSR_DATA:
- dbg("%s - Port %u LSR Status = %02x, Data = %02x", __func__, edge_serial->rxPort, byte2, byte3);
- // byte2 is LSR Register
- // byte3 is broken data byte
- handle_new_lsr(edge_port, true, byte2, byte3);
- break;
- //
- // case IOSP_EXT_4_STATUS:
- // dbg("%s - Port %u LSR Status = %02x Data = %02x", __func__, edge_serial->rxPort, byte2, byte3);
- // break;
- //
- case IOSP_STATUS_MSR:
- dbg("%s - Port %u MSR Status = %02x", __func__, edge_serial->rxPort, byte2);
-
- // Process this new modem status and generate appropriate
- // events, etc, based on the new status. This routine
- // also saves the MSR in Port->ShadowMsr.
- handle_new_msr(edge_port, byte2);
- break;
+ case IOSP_STATUS_LSR_DATA:
+ dbg("%s - Port %u LSR Status = %02x, Data = %02x",
+ __func__, edge_serial->rxPort, byte2, byte3);
+ /* byte2 is LSR Register */
+ /* byte3 is broken data byte */
+ handle_new_lsr(edge_port, true, byte2, byte3);
+ break;
+ /*
+ * case IOSP_EXT_4_STATUS:
+ * dbg("%s - Port %u LSR Status = %02x Data = %02x",
+ * __func__, edge_serial->rxPort, byte2, byte3);
+ * break;
+ */
+ case IOSP_STATUS_MSR:
+ dbg("%s - Port %u MSR Status = %02x",
+ __func__, edge_serial->rxPort, byte2);
+ /*
+ * Process this new modem status and generate appropriate
+ * events, etc, based on the new status. This routine
+ * also saves the MSR in Port->ShadowMsr.
+ */
+ handle_new_msr(edge_port, byte2);
+ break;
- default:
- dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
- break;
+ default:
+ dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
+ break;
}
-
return;
}
@@ -1979,7 +2123,8 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
* edge_tty_recv
* this function passes data on to the tty flip buffer
*****************************************************************************/
-static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length)
+static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
+ unsigned char *data, int length)
{
int cnt;
@@ -1988,7 +2133,7 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned c
if (cnt < length) {
dev_err(dev, "%s - dropping data, %d bytes lost\n",
__func__, length - cnt);
- if(cnt == 0)
+ if (cnt == 0)
break;
}
tty_insert_flip_string(tty, data, cnt);
@@ -2010,22 +2155,19 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
dbg("%s %02x", __func__, newMsr);
- if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
+ if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
+ EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
icount = &edge_port->icount;
/* update input line counters */
- if (newMsr & EDGEPORT_MSR_DELTA_CTS) {
+ if (newMsr & EDGEPORT_MSR_DELTA_CTS)
icount->cts++;
- }
- if (newMsr & EDGEPORT_MSR_DELTA_DSR) {
+ if (newMsr & EDGEPORT_MSR_DELTA_DSR)
icount->dsr++;
- }
- if (newMsr & EDGEPORT_MSR_DELTA_CD) {
+ if (newMsr & EDGEPORT_MSR_DELTA_CD)
icount->dcd++;
- }
- if (newMsr & EDGEPORT_MSR_DELTA_RI) {
+ if (newMsr & EDGEPORT_MSR_DELTA_RI)
icount->rng++;
- }
wake_up_interruptible(&edge_port->delta_msr_wait);
}
@@ -2040,42 +2182,41 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
* handle_new_lsr
* this function handles any change to the lsr register for a port.
*****************************************************************************/
-static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 lsr, __u8 data)
+static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
+ __u8 lsr, __u8 data)
{
- __u8 newLsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
- struct async_icount *icount;
+ __u8 newLsr = (__u8) (lsr & (__u8)
+ (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
+ struct async_icount *icount;
dbg("%s - %02x", __func__, newLsr);
edge_port->shadowLSR = lsr;
if (newLsr & LSR_BREAK) {
- //
- // Parity and Framing errors only count if they
- // occur exclusive of a break being
- // received.
- //
+ /*
+ * Parity and Framing errors only count if they
+ * occur exclusive of a break being
+ * received.
+ */
newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
}
/* Place LSR data byte into Rx buffer */
if (lsrData && edge_port->port->port.tty)
- edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
+ edge_tty_recv(&edge_port->port->dev,
+ edge_port->port->port.tty, &data, 1);
/* update input line counters */
icount = &edge_port->icount;
- if (newLsr & LSR_BREAK) {
+ if (newLsr & LSR_BREAK)
icount->brk++;
- }
- if (newLsr & LSR_OVER_ERR) {
+ if (newLsr & LSR_OVER_ERR)
icount->overrun++;
- }
- if (newLsr & LSR_PAR_ERR) {
+ if (newLsr & LSR_PAR_ERR)
icount->parity++;
- }
- if (newLsr & LSR_FRM_ERR) {
+ if (newLsr & LSR_FRM_ERR)
icount->frame++;
- }
return;
}
@@ -2083,12 +2224,13 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 l
/****************************************************************************
* sram_write
- * writes a number of bytes to the Edgeport device's sram starting at the
+ * writes a number of bytes to the Edgeport device's sram starting at the
* given address.
* If successful returns the number of bytes written, otherwise it returns
* a negative error number of the problem.
****************************************************************************/
-static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data)
+static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+ __u16 length, __u8 *data)
{
int result;
__u16 current_length;
@@ -2096,32 +2238,37 @@ static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u
dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
- transfer_buffer = kmalloc (64, GFP_KERNEL);
+ transfer_buffer = kmalloc(64, GFP_KERNEL);
if (!transfer_buffer) {
- dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64);
+ dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
+ __func__, 64);
return -ENOMEM;
}
/* need to split these writes up into 64 byte chunks */
result = 0;
while (length > 0) {
- if (length > 64) {
+ if (length > 64)
current_length = 64;
- } else {
+ else
current_length = length;
- }
-// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length);
- memcpy (transfer_buffer, data, current_length);
- result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_RAM,
- 0x40, addr, extAddr, transfer_buffer, current_length, 300);
+
+/* dbg("%s - writing %x, %x, %d", __func__,
+ extAddr, addr, current_length); */
+ memcpy(transfer_buffer, data, current_length);
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ USB_REQUEST_ION_WRITE_RAM,
+ 0x40, addr, extAddr, transfer_buffer,
+ current_length, 300);
if (result < 0)
break;
length -= current_length;
addr += current_length;
data += current_length;
- }
+ }
- kfree (transfer_buffer);
+ kfree(transfer_buffer);
return result;
}
@@ -2133,40 +2280,46 @@ static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u
* If successful returns the number of bytes written, otherwise it returns
* a negative error number of the problem.
****************************************************************************/
-static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data)
+static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
+ __u16 length, __u8 *data)
{
int result;
__u16 current_length;
unsigned char *transfer_buffer;
-// dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
+/* dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */
- transfer_buffer = kmalloc (64, GFP_KERNEL);
+ transfer_buffer = kmalloc(64, GFP_KERNEL);
if (!transfer_buffer) {
- dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64);
+ dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
+ __func__, 64);
return -ENOMEM;
}
/* need to split these writes up into 64 byte chunks */
result = 0;
while (length > 0) {
- if (length > 64) {
+ if (length > 64)
current_length = 64;
- } else {
+ else
current_length = length;
- }
-// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length);
- memcpy (transfer_buffer, data, current_length);
- result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_ROM,
- 0x40, addr, extAddr, transfer_buffer, current_length, 300);
+
+/* dbg("%s - writing %x, %x, %d", __func__,
+ extAddr, addr, current_length); */
+ memcpy(transfer_buffer, data, current_length);
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ USB_REQUEST_ION_WRITE_ROM, 0x40,
+ addr, extAddr,
+ transfer_buffer, current_length, 300);
if (result < 0)
break;
length -= current_length;
addr += current_length;
data += current_length;
- }
+ }
- kfree (transfer_buffer);
+ kfree(transfer_buffer);
return result;
}
@@ -2178,7 +2331,8 @@ static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u1
* If successful returns the number of bytes read, otherwise it returns
* a negative error number of the problem.
****************************************************************************/
-static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data)
+static int rom_read(struct usb_serial *serial, __u16 extAddr,
+ __u16 addr, __u16 length, __u8 *data)
{
int result;
__u16 current_length;
@@ -2186,32 +2340,36 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16
dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
- transfer_buffer = kmalloc (64, GFP_KERNEL);
+ transfer_buffer = kmalloc(64, GFP_KERNEL);
if (!transfer_buffer) {
- dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64);
+ dev_err(&serial->dev->dev,
+ "%s - kmalloc(%d) failed.\n", __func__, 64);
return -ENOMEM;
}
/* need to split these reads up into 64 byte chunks */
result = 0;
while (length > 0) {
- if (length > 64) {
+ if (length > 64)
current_length = 64;
- } else {
+ else
current_length = length;
- }
-// dbg("%s - %x, %x, %d", __func__, extAddr, addr, current_length);
- result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM,
- 0xC0, addr, extAddr, transfer_buffer, current_length, 300);
+/* dbg("%s - %x, %x, %d", __func__,
+ extAddr, addr, current_length); */
+ result = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ USB_REQUEST_ION_READ_ROM,
+ 0xC0, addr, extAddr, transfer_buffer,
+ current_length, 300);
if (result < 0)
break;
- memcpy (data, transfer_buffer, current_length);
+ memcpy(data, transfer_buffer, current_length);
length -= current_length;
addr += current_length;
data += current_length;
- }
+ }
- kfree (transfer_buffer);
+ kfree(transfer_buffer);
return result;
}
@@ -2220,7 +2378,8 @@ static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16
* send_iosp_ext_cmd
* Is used to send a IOSP message to the Edgeport device
****************************************************************************/
-static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param)
+static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
+ __u8 command, __u8 param)
{
unsigned char *buffer;
unsigned char *currentCommand;
@@ -2229,19 +2388,20 @@ static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u
dbg("%s - %d, %d", __func__, command, param);
- buffer = kmalloc (10, GFP_ATOMIC);
+ buffer = kmalloc(10, GFP_ATOMIC);
if (!buffer) {
- dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 10);
+ dev_err(&edge_port->port->dev,
+ "%s - kmalloc(%d) failed.\n", __func__, 10);
return -ENOMEM;
}
currentCommand = buffer;
- MAKE_CMD_EXT_CMD (¤tCommand, &length,
- edge_port->port->number - edge_port->port->serial->minor,
- command, param);
+ MAKE_CMD_EXT_CMD(¤tCommand, &length,
+ edge_port->port->number - edge_port->port->serial->minor,
+ command, param);
- status = write_cmd_usb (edge_port, buffer, length);
+ status = write_cmd_usb(edge_port, buffer, length);
if (status) {
/* something bad happened, let's free up the memory */
kfree(buffer);
@@ -2255,43 +2415,50 @@ static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u
* write_cmd_usb
* this function writes the given buffer out to the bulk write endpoint.
*****************************************************************************/
-static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int length)
+static int write_cmd_usb(struct edgeport_port *edge_port,
+ unsigned char *buffer, int length)
{
- struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
+ struct edgeport_serial *edge_serial =
+ usb_get_serial_data(edge_port->port->serial);
int status = 0;
struct urb *urb;
int timeout;
- usb_serial_debug_data(debug, &edge_port->port->dev, __func__, length, buffer);
+ usb_serial_debug_data(debug, &edge_port->port->dev,
+ __func__, length, buffer);
/* Allocate our next urb */
- urb = usb_alloc_urb (0, GFP_ATOMIC);
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
atomic_inc(&CmdUrbs);
- dbg("%s - ALLOCATE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs));
+ dbg("%s - ALLOCATE URB %p (outstanding %d)",
+ __func__, urb, atomic_read(&CmdUrbs));
- usb_fill_bulk_urb (urb, edge_serial->serial->dev,
- usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint),
- buffer, length, edge_bulk_out_cmd_callback, edge_port);
+ usb_fill_bulk_urb(urb, edge_serial->serial->dev,
+ usb_sndbulkpipe(edge_serial->serial->dev,
+ edge_serial->bulk_out_endpoint),
+ buffer, length, edge_bulk_out_cmd_callback, edge_port);
edge_port->commandPending = true;
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
/* something went wrong */
- dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __func__, status);
+ dev_err(&edge_port->port->dev,
+ "%s - usb_submit_urb(write command) failed, status = %d\n",
+ __func__, status);
usb_kill_urb(urb);
usb_free_urb(urb);
atomic_dec(&CmdUrbs);
return status;
}
- // wait for command to finish
+ /* wait for command to finish */
timeout = COMMAND_TIMEOUT;
#if 0
- wait_event (&edge_port->wait_command, !edge_port->commandPending);
+ wait_event(&edge_port->wait_command, !edge_port->commandPending);
if (edge_port->commandPending) {
/* command timed out */
@@ -2308,15 +2475,18 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer
* this function sends the proper command to change the baud rate of the
* specified port.
*****************************************************************************/
-static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate)
+static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
+ int baudRate)
{
- struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
+ struct edgeport_serial *edge_serial =
+ usb_get_serial_data(edge_port->port->serial);
unsigned char *cmdBuffer;
unsigned char *currCmd;
int cmdLen = 0;
int divisor;
int status;
- unsigned char number = edge_port->port->number - edge_port->port->serial->minor;
+ unsigned char number =
+ edge_port->port->number - edge_port->port->serial->minor;
if (edge_serial->is_epic &&
!edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
@@ -2325,36 +2495,40 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa
return 0;
}
- dbg("%s - port = %d, baud = %d", __func__, edge_port->port->number, baudRate);
+ dbg("%s - port = %d, baud = %d", __func__,
+ edge_port->port->number, baudRate);
- status = calc_baud_rate_divisor (baudRate, &divisor);
+ status = calc_baud_rate_divisor(baudRate, &divisor);
if (status) {
- dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __func__);
+ dev_err(&edge_port->port->dev, "%s - bad baud rate\n",
+ __func__);
return status;
}
- // Alloc memory for the string of commands.
- cmdBuffer = kmalloc (0x100, GFP_ATOMIC);
+ /* Alloc memory for the string of commands. */
+ cmdBuffer = kmalloc(0x100, GFP_ATOMIC);
if (!cmdBuffer) {
- dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100);
+ dev_err(&edge_port->port->dev,
+ "%s - kmalloc(%d) failed.\n", __func__, 0x100);
return -ENOMEM;
}
currCmd = cmdBuffer;
- // Enable access to divisor latch
- MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE );
+ /* Enable access to divisor latch */
+ MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE);
- // Write the divisor itself
- MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLL, LOW8 (divisor) );
- MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, DLM, HIGH8(divisor) );
+ /* Write the divisor itself */
+ MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor));
+ MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor));
- // Restore original value to disable access to divisor latch
- MAKE_CMD_WRITE_REG( &currCmd, &cmdLen, number, LCR, edge_port->shadowLCR);
+ /* Restore original value to disable access to divisor latch */
+ MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR,
+ edge_port->shadowLCR);
- status = write_cmd_usb(edge_port, cmdBuffer, cmdLen );
+ status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
if (status) {
/* something bad happened, let's free up the memory */
- kfree (cmdBuffer);
+ kfree(cmdBuffer);
}
return status;
@@ -2366,7 +2540,7 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa
* this function calculates the proper baud rate divisor for the specified
* baud rate.
*****************************************************************************/
-static int calc_baud_rate_divisor (int baudrate, int *divisor)
+static int calc_baud_rate_divisor(int baudrate, int *divisor)
{
int i;
__u16 custom;
@@ -2375,17 +2549,17 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor)
dbg("%s - %d", __func__, baudrate);
for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
- if ( divisor_table[i].BaudRate == baudrate ) {
+ if (divisor_table[i].BaudRate == baudrate) {
*divisor = divisor_table[i].Divisor;
return 0;
}
}
- // We have tried all of the standard baud rates
- // lets try to calculate the divisor for this baud rate
- // Make sure the baud rate is reasonable
+ /* We have tried all of the standard baud rates
+ * lets try to calculate the divisor for this baud rate
+ * Make sure the baud rate is reasonable */
if (baudrate > 50 && baudrate < 230400) {
- // get divisor
+ /* get divisor */
custom = (__u16)((230400L + baudrate/2) / baudrate);
*divisor = custom;
@@ -2400,17 +2574,20 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor)
/*****************************************************************************
* send_cmd_write_uart_register
- * this function builds up a uart register message and sends to to the device.
+ * this function builds up a uart register message and sends to to the device.
*****************************************************************************/
-static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue)
+static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
+ __u8 regNum, __u8 regValue)
{
- struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
+ struct edgeport_serial *edge_serial =
+ usb_get_serial_data(edge_port->port->serial);
unsigned char *cmdBuffer;
unsigned char *currCmd;
unsigned long cmdLen = 0;
int status;
- dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
+ dbg("%s - write to %s register 0x%02x",
+ (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
if (edge_serial->is_epic &&
!edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
@@ -2422,27 +2599,26 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
if (edge_serial->is_epic &&
!edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
regNum == LCR) {
- dbg ("SendCmdWriteUartReg - Not writing to LCR Register");
+ dbg("SendCmdWriteUartReg - Not writing to LCR Register");
return 0;
}
- // Alloc memory for the string of commands.
- cmdBuffer = kmalloc (0x10, GFP_ATOMIC);
- if (cmdBuffer == NULL ) {
+ /* Alloc memory for the string of commands. */
+ cmdBuffer = kmalloc(0x10, GFP_ATOMIC);
+ if (cmdBuffer == NULL)
return -ENOMEM;
- }
currCmd = cmdBuffer;
- // Build a cmd in the buffer to write the given register
- MAKE_CMD_WRITE_REG (&currCmd, &cmdLen,
- edge_port->port->number - edge_port->port->serial->minor,
- regNum, regValue);
+ /* Build a cmd in the buffer to write the given register */
+ MAKE_CMD_WRITE_REG(&currCmd, &cmdLen,
+ edge_port->port->number - edge_port->port->serial->minor,
+ regNum, regValue);
status = write_cmd_usb(edge_port, cmdBuffer, cmdLen);
if (status) {
/* something bad happened, let's free up the memory */
- kfree (cmdBuffer);
+ kfree(cmdBuffer);
}
return status;
@@ -2451,14 +2627,15 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
/*****************************************************************************
* change_port_settings
- * This routine is called to set the UART on the device to match the specified
- * new settings.
+ * This routine is called to set the UART on the device to match the
+ * specified new settings.
*****************************************************************************/
static void change_port_settings(struct tty_struct *tty,
struct edgeport_port *edge_port, struct ktermios *old_termios)
{
- struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
+ struct edgeport_serial *edge_serial =
+ usb_get_serial_data(edge_port->port->serial);
int baud;
unsigned cflag;
__u8 mask = 0xff;
@@ -2480,11 +2657,23 @@ static void change_port_settings(struct tty_struct *tty,
cflag = tty->termios->c_cflag;
switch (cflag & CSIZE) {
- case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg("%s - data bits = 5", __func__); break;
- case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg("%s - data bits = 6", __func__); break;
- case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg("%s - data bits = 7", __func__); break;
- default:
- case CS8: lData = LCR_BITS_8; dbg("%s - data bits = 8", __func__); break;
+ case CS5:
+ lData = LCR_BITS_5; mask = 0x1f;
+ dbg("%s - data bits = 5", __func__);
+ break;
+ case CS6:
+ lData = LCR_BITS_6; mask = 0x3f;
+ dbg("%s - data bits = 6", __func__);
+ break;
+ case CS7:
+ lData = LCR_BITS_7; mask = 0x7f;
+ dbg("%s - data bits = 7", __func__);
+ break;
+ default:
+ case CS8:
+ lData = LCR_BITS_8;
+ dbg("%s - data bits = 8", __func__);
+ break;
}
lParity = LCR_PAR_NONE;
@@ -2526,7 +2715,8 @@ static void change_port_settings(struct tty_struct *tty,
dbg("%s - RTS/CTS is disabled", __func__);
}
- /* if we are implementing XON/XOFF, set the start and stop character in the device */
+ /* if we are implementing XON/XOFF, set the start and stop character
+ in the device */
if (I_IXOFF(tty) || I_IXON(tty)) {
unsigned char stop_char = STOP_CHAR(tty);
unsigned char start_char = START_CHAR(tty);
@@ -2534,14 +2724,17 @@ static void change_port_settings(struct tty_struct *tty,
if ((!edge_serial->is_epic) ||
((edge_serial->is_epic) &&
(edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
- send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XON_CHAR, start_char);
- send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XOFF_CHAR, stop_char);
+ send_iosp_ext_cmd(edge_port,
+ IOSP_CMD_SET_XON_CHAR, start_char);
+ send_iosp_ext_cmd(edge_port,
+ IOSP_CMD_SET_XOFF_CHAR, stop_char);
}
/* if we are implementing INBOUND XON/XOFF */
if (I_IXOFF(tty)) {
rxFlow |= IOSP_RX_FLOW_XON_XOFF;
- dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char);
+ dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
+ __func__, start_char, stop_char);
} else {
dbg("%s - INBOUND XON/XOFF is disabled", __func__);
}
@@ -2549,7 +2742,8 @@ static void change_port_settings(struct tty_struct *tty,
/* if we are implementing OUTBOUND XON/XOFF */
if (I_IXON(tty)) {
txFlow |= IOSP_TX_FLOW_XON_XOFF;
- dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char);
+ dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
+ __func__, start_char, stop_char);
} else {
dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
}
@@ -2572,20 +2766,20 @@ static void change_port_settings(struct tty_struct *tty,
edge_port->validDataMask = mask;
/* Send the updated LCR value to the EdgePort */
- status = send_cmd_write_uart_register(edge_port, LCR, edge_port->shadowLCR);
- if (status != 0) {
+ status = send_cmd_write_uart_register(edge_port, LCR,
+ edge_port->shadowLCR);
+ if (status != 0)
return;
- }
/* set up the MCR register and send it to the EdgePort */
edge_port->shadowMCR = MCR_MASTER_IE;
- if (cflag & CBAUD) {
+ if (cflag & CBAUD)
edge_port->shadowMCR |= (MCR_DTR | MCR_RTS);
- }
- status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
- if (status != 0) {
+
+ status = send_cmd_write_uart_register(edge_port, MCR,
+ edge_port->shadowMCR);
+ if (status != 0)
return;
- }
/* Determine divisor based on baud rate */
baud = tty_get_baud_rate(tty);
@@ -2595,7 +2789,7 @@ static void change_port_settings(struct tty_struct *tty,
}
dbg("%s - baud rate = %d", __func__, baud);
- status = send_cmd_write_baud_rate (edge_port, baud);
+ status = send_cmd_write_baud_rate(edge_port, baud);
if (status == -1) {
/* Speed change was not possible - put back the old speed */
baud = tty_termios_baud_rate(old_termios);
@@ -2612,7 +2806,8 @@ static void change_port_settings(struct tty_struct *tty,
* ASCII range, but it's only for debugging...
* NOTE: expects the unicode in LE format
****************************************************************************/
-static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unicode_size)
+static void unicode_to_ascii(char *string, int buflen,
+ __le16 *unicode, int unicode_size)
{
int i;
@@ -2631,75 +2826,99 @@ static void unicode_to_ascii(char *string, int buflen, __le16 *unicode, int unic
/****************************************************************************
* get_manufacturing_desc
- * reads in the manufacturing descriptor and stores it into the serial
+ * reads in the manufacturing descriptor and stores it into the serial
* structure.
****************************************************************************/
-static void get_manufacturing_desc (struct edgeport_serial *edge_serial)
+static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
{
int response;
dbg("getting manufacturer descriptor");
- response = rom_read (edge_serial->serial, (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
- (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), EDGE_MANUF_DESC_LEN,
- (__u8 *)(&edge_serial->manuf_descriptor));
+ response = rom_read(edge_serial->serial,
+ (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
+ (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff),
+ EDGE_MANUF_DESC_LEN,
+ (__u8 *)(&edge_serial->manuf_descriptor));
- if (response < 1) {
- dev_err(&edge_serial->serial->dev->dev, "error in getting manufacturer descriptor\n");
- } else {
+ if (response < 1)
+ dev_err(&edge_serial->serial->dev->dev,
+ "error in getting manufacturer descriptor\n");
+ else {
char string[30];
dbg("**Manufacturer Descriptor");
- dbg(" RomSize: %dK", edge_serial->manuf_descriptor.RomSize);
- dbg(" RamSize: %dK", edge_serial->manuf_descriptor.RamSize);
- dbg(" CpuRev: %d", edge_serial->manuf_descriptor.CpuRev);
- dbg(" BoardRev: %d", edge_serial->manuf_descriptor.BoardRev);
- dbg(" NumPorts: %d", edge_serial->manuf_descriptor.NumPorts);
- dbg(" DescDate: %d/%d/%d", edge_serial->manuf_descriptor.DescDate[0], edge_serial->manuf_descriptor.DescDate[1], edge_serial->manuf_descriptor.DescDate[2]+1900);
+ dbg(" RomSize: %dK",
+ edge_serial->manuf_descriptor.RomSize);
+ dbg(" RamSize: %dK",
+ edge_serial->manuf_descriptor.RamSize);
+ dbg(" CpuRev: %d",
+ edge_serial->manuf_descriptor.CpuRev);
+ dbg(" BoardRev: %d",
+ edge_serial->manuf_descriptor.BoardRev);
+ dbg(" NumPorts: %d",
+ edge_serial->manuf_descriptor.NumPorts);
+ dbg(" DescDate: %d/%d/%d",
+ edge_serial->manuf_descriptor.DescDate[0],
+ edge_serial->manuf_descriptor.DescDate[1],
+ edge_serial->manuf_descriptor.DescDate[2]+1900);
unicode_to_ascii(string, sizeof(string),
- edge_serial->manuf_descriptor.SerialNumber,
- edge_serial->manuf_descriptor.SerNumLength/2);
+ edge_serial->manuf_descriptor.SerialNumber,
+ edge_serial->manuf_descriptor.SerNumLength/2);
dbg(" SerialNumber: %s", string);
unicode_to_ascii(string, sizeof(string),
- edge_serial->manuf_descriptor.AssemblyNumber,
- edge_serial->manuf_descriptor.AssemblyNumLength/2);
+ edge_serial->manuf_descriptor.AssemblyNumber,
+ edge_serial->manuf_descriptor.AssemblyNumLength/2);
dbg(" AssemblyNumber: %s", string);
unicode_to_ascii(string, sizeof(string),
edge_serial->manuf_descriptor.OemAssyNumber,
edge_serial->manuf_descriptor.OemAssyNumLength/2);
dbg(" OemAssyNumber: %s", string);
- dbg(" UartType: %d", edge_serial->manuf_descriptor.UartType);
- dbg(" IonPid: %d", edge_serial->manuf_descriptor.IonPid);
- dbg(" IonConfig: %d", edge_serial->manuf_descriptor.IonConfig);
+ dbg(" UartType: %d",
+ edge_serial->manuf_descriptor.UartType);
+ dbg(" IonPid: %d",
+ edge_serial->manuf_descriptor.IonPid);
+ dbg(" IonConfig: %d",
+ edge_serial->manuf_descriptor.IonConfig);
}
}
/****************************************************************************
* get_boot_desc
- * reads in the bootloader descriptor and stores it into the serial
+ * reads in the bootloader descriptor and stores it into the serial
* structure.
****************************************************************************/
-static void get_boot_desc (struct edgeport_serial *edge_serial)
+static void get_boot_desc(struct edgeport_serial *edge_serial)
{
int response;
dbg("getting boot descriptor");
- response = rom_read (edge_serial->serial, (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
- (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), EDGE_BOOT_DESC_LEN,
- (__u8 *)(&edge_serial->boot_descriptor));
+ response = rom_read(edge_serial->serial,
+ (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
+ (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff),
+ EDGE_BOOT_DESC_LEN,
+ (__u8 *)(&edge_serial->boot_descriptor));
- if (response < 1) {
- dev_err(&edge_serial->serial->dev->dev, "error in getting boot descriptor\n");
- } else {
+ if (response < 1)
+ dev_err(&edge_serial->serial->dev->dev,
+ "error in getting boot descriptor\n");
+ else {
dbg("**Boot Descriptor:");
- dbg(" BootCodeLength: %d", le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
- dbg(" MajorVersion: %d", edge_serial->boot_descriptor.MajorVersion);
- dbg(" MinorVersion: %d", edge_serial->boot_descriptor.MinorVersion);
- dbg(" BuildNumber: %d", le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
- dbg(" Capabilities: 0x%x", le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
- dbg(" UConfig0: %d", edge_serial->boot_descriptor.UConfig0);
- dbg(" UConfig1: %d", edge_serial->boot_descriptor.UConfig1);
+ dbg(" BootCodeLength: %d",
+ le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
+ dbg(" MajorVersion: %d",
+ edge_serial->boot_descriptor.MajorVersion);
+ dbg(" MinorVersion: %d",
+ edge_serial->boot_descriptor.MinorVersion);
+ dbg(" BuildNumber: %d",
+ le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
+ dbg(" Capabilities: 0x%x",
+ le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
+ dbg(" UConfig0: %d",
+ edge_serial->boot_descriptor.UConfig0);
+ dbg(" UConfig1: %d",
+ edge_serial->boot_descriptor.UConfig1);
}
}
@@ -2708,7 +2927,7 @@ static void get_boot_desc (struct edgeport_serial *edge_serial)
* load_application_firmware
* This is called to load the application firmware to the device
****************************************************************************/
-static void load_application_firmware (struct edgeport_serial *edge_serial)
+static void load_application_firmware(struct edgeport_serial *edge_serial)
{
struct edge_firmware_image_record *record;
unsigned char *firmware;
@@ -2718,53 +2937,60 @@ static void load_application_firmware (struct edgeport_serial *edge_serial)
switch (edge_serial->product_info.iDownloadFile) {
- case EDGE_DOWNLOAD_FILE_I930:
- dbg("downloading firmware version (930) %d.%d.%d",
- OperationalCodeImageVersion_GEN1.MajorVersion,
- OperationalCodeImageVersion_GEN1.MinorVersion,
- OperationalCodeImageVersion_GEN1.BuildNumber);
- firmware = &OperationalCodeImage_GEN1[0];
- FirmwareImage = &OperationalCodeImage_GEN1[0];
- ImageSize = sizeof(OperationalCodeImage_GEN1);
- break;
+ case EDGE_DOWNLOAD_FILE_I930:
+ dbg("downloading firmware version (930) %d.%d.%d",
+ OperationalCodeImageVersion_GEN1.MajorVersion,
+ OperationalCodeImageVersion_GEN1.MinorVersion,
+ OperationalCodeImageVersion_GEN1.BuildNumber);
+ firmware = &OperationalCodeImage_GEN1[0];
+ FirmwareImage = &OperationalCodeImage_GEN1[0];
+ ImageSize = sizeof(OperationalCodeImage_GEN1);
+ break;
- case EDGE_DOWNLOAD_FILE_80251:
- dbg("downloading firmware version (80251) %d.%d.%d",
- OperationalCodeImageVersion_GEN2.MajorVersion,
- OperationalCodeImageVersion_GEN2.MinorVersion,
- OperationalCodeImageVersion_GEN2.BuildNumber);
- firmware = &OperationalCodeImage_GEN2[0];
- FirmwareImage = &OperationalCodeImage_GEN2[0];
- ImageSize = sizeof(OperationalCodeImage_GEN2);
- break;
+ case EDGE_DOWNLOAD_FILE_80251:
+ dbg("downloading firmware version (80251) %d.%d.%d",
+ OperationalCodeImageVersion_GEN2.MajorVersion,
+ OperationalCodeImageVersion_GEN2.MinorVersion,
+ OperationalCodeImageVersion_GEN2.BuildNumber);
+ firmware = &OperationalCodeImage_GEN2[0];
+ FirmwareImage = &OperationalCodeImage_GEN2[0];
+ ImageSize = sizeof(OperationalCodeImage_GEN2);
+ break;
- case EDGE_DOWNLOAD_FILE_NONE:
- dbg ("No download file specified, skipping download\n");
- return;
+ case EDGE_DOWNLOAD_FILE_NONE:
+ dbg("No download file specified, skipping download\n");
+ return;
- default:
- return;
+ default:
+ return;
}
-
for (;;) {
record = (struct edge_firmware_image_record *)firmware;
- response = sram_write (edge_serial->serial, le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len), &record->Data[0]);
+ response = sram_write(edge_serial->serial,
+ le16_to_cpu(record->ExtAddr),
+ le16_to_cpu(record->Addr),
+ le16_to_cpu(record->Len),
+ &record->Data[0]);
if (response < 0) {
- dev_err(&edge_serial->serial->dev->dev, "sram_write failed (%x, %x, %d)\n", le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len));
+ dev_err(&edge_serial->serial->dev->dev,
+ "sram_write failed (%x, %x, %d)\n",
+ le16_to_cpu(record->ExtAddr),
+ le16_to_cpu(record->Addr),
+ le16_to_cpu(record->Len));
break;
}
- firmware += sizeof (struct edge_firmware_image_record) + le16_to_cpu(record->Len);
- if (firmware >= &FirmwareImage[ImageSize]) {
+ firmware += sizeof(struct edge_firmware_image_record)
+ + le16_to_cpu(record->Len);
+ if (firmware >= &FirmwareImage[ImageSize])
break;
- }
}
dbg("sending exec_dl_code");
- response = usb_control_msg (edge_serial->serial->dev,
- usb_sndctrlpipe(edge_serial->serial->dev, 0),
- USB_REQUEST_ION_EXEC_DL_CODE,
- 0x40, 0x4000, 0x0001, NULL, 0, 3000);
+ response = usb_control_msg(edge_serial->serial->dev,
+ usb_sndctrlpipe(edge_serial->serial->dev, 0),
+ USB_REQUEST_ION_EXEC_DL_CODE,
+ 0x40, 0x4000, 0x0001, NULL, 0, 3000);
return;
}
@@ -2773,7 +2999,7 @@ static void load_application_firmware (struct edgeport_serial *edge_serial)
/****************************************************************************
* edge_startup
****************************************************************************/
-static int edge_startup (struct usb_serial *serial)
+static int edge_startup(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial;
struct edgeport_port *edge_port;
@@ -2815,10 +3041,10 @@ static int edge_startup (struct usb_serial *serial)
sizeof(struct edge_compatibility_bits));
/* get the manufacturing descriptor for this device */
- get_manufacturing_desc (edge_serial);
+ get_manufacturing_desc(edge_serial);
/* get the boot descriptor */
- get_boot_desc (edge_serial);
+ get_boot_desc(edge_serial);
get_product_info(edge_serial);
}
@@ -2839,37 +3065,40 @@ static int edge_startup (struct usb_serial *serial)
/* If not an EPiC device */
if (!edge_serial->is_epic) {
/* now load the application firmware into this device */
- load_application_firmware (edge_serial);
+ load_application_firmware(edge_serial);
dbg("%s - time 2 %ld", __func__, jiffies);
/* Check current Edgeport EEPROM and update if necessary */
- update_edgeport_E2PROM (edge_serial);
+ update_edgeport_E2PROM(edge_serial);
dbg("%s - time 3 %ld", __func__, jiffies);
/* set the configuration to use #1 */
-// dbg("set_configuration 1");
-// usb_set_configuration (dev, 1);
+/* dbg("set_configuration 1"); */
+/* usb_set_configuration (dev, 1); */
}
- /* we set up the pointers to the endpoints in the edge_open function,
+ /* we set up the pointers to the endpoints in the edge_open function,
* as the structures aren't created yet. */
/* set up our port private structures */
for (i = 0; i < serial->num_ports; ++i) {
- edge_port = kmalloc (sizeof(struct edgeport_port), GFP_KERNEL);
+ edge_port = kmalloc(sizeof(struct edgeport_port), GFP_KERNEL);
if (edge_port == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+ dev_err(&serial->dev->dev,
+ "%s - Out of memory\n", __func__);
for (j = 0; j < i; ++j) {
- kfree (usb_get_serial_port_data(serial->port[j]));
- usb_set_serial_port_data(serial->port[j], NULL);
+ kfree(usb_get_serial_port_data(
+ serial->port[j]));
+ usb_set_serial_port_data(serial->port[j],
+ NULL);
}
usb_set_serial_data(serial, NULL);
kfree(edge_serial);
return -ENOMEM;
}
- memset (edge_port, 0, sizeof(struct edgeport_port));
+ memset(edge_port, 0, sizeof(struct edgeport_port));
spin_lock_init(&edge_port->ep_lock);
edge_port->port = serial->port[i];
usb_set_serial_port_data(serial->port[i], edge_port);
@@ -2878,14 +3107,16 @@ static int edge_startup (struct usb_serial *serial)
response = 0;
if (edge_serial->is_epic) {
- /* EPIC thing, set up our interrupt polling now and our read urb, so
- * that the device knows it really is connected. */
+ /* EPIC thing, set up our interrupt polling now and our read
+ * urb, so that the device knows it really is connected. */
interrupt_in_found = bulk_in_found = bulk_out_found = false;
- for (i = 0; i < serial->interface->altsetting[0].desc.bNumEndpoints; ++i) {
+ for (i = 0; i < serial->interface->altsetting[0]
+ .desc.bNumEndpoints; ++i) {
struct usb_endpoint_descriptor *endpoint;
int buffer_size;
- endpoint = &serial->interface->altsetting[0].endpoint[i].desc;
+ endpoint = &serial->interface->altsetting[0].
+ endpoint[i].desc;
buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
if (!interrupt_in_found &&
(usb_endpoint_is_int_in(endpoint))) {
@@ -2893,58 +3124,67 @@ static int edge_startup (struct usb_serial *serial)
dbg("found interrupt in");
/* not set up yet, so do it now */
- edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL);
+ edge_serial->interrupt_read_urb =
+ usb_alloc_urb(0, GFP_KERNEL);
if (!edge_serial->interrupt_read_urb) {
err("out of memory");
return -ENOMEM;
}
- edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+ edge_serial->interrupt_in_buffer =
+ kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->interrupt_in_buffer) {
err("out of memory");
usb_free_urb(edge_serial->interrupt_read_urb);
return -ENOMEM;
}
- edge_serial->interrupt_in_endpoint = endpoint->bEndpointAddress;
+ edge_serial->interrupt_in_endpoint =
+ endpoint->bEndpointAddress;
/* set up our interrupt urb */
- usb_fill_int_urb(edge_serial->interrupt_read_urb,
- dev,
- usb_rcvintpipe(dev, endpoint->bEndpointAddress),
- edge_serial->interrupt_in_buffer,
- buffer_size,
- edge_interrupt_callback,
- edge_serial,
- endpoint->bInterval);
+ usb_fill_int_urb(
+ edge_serial->interrupt_read_urb,
+ dev,
+ usb_rcvintpipe(dev,
+ endpoint->bEndpointAddress),
+ edge_serial->interrupt_in_buffer,
+ buffer_size,
+ edge_interrupt_callback,
+ edge_serial,
+ endpoint->bInterval);
interrupt_in_found = true;
}
if (!bulk_in_found &&
- (usb_endpoint_is_bulk_in(endpoint))) {
+ (usb_endpoint_is_bulk_in(endpoint))) {
/* we found a bulk in endpoint */
dbg("found bulk in");
/* not set up yet, so do it now */
- edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL);
+ edge_serial->read_urb =
+ usb_alloc_urb(0, GFP_KERNEL);
if (!edge_serial->read_urb) {
err("out of memory");
return -ENOMEM;
}
- edge_serial->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+ edge_serial->bulk_in_buffer =
+ kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->bulk_in_buffer) {
- err ("out of memory");
+ err("out of memory");
usb_free_urb(edge_serial->read_urb);
return -ENOMEM;
}
- edge_serial->bulk_in_endpoint = endpoint->bEndpointAddress;
+ edge_serial->bulk_in_endpoint =
+ endpoint->bEndpointAddress;
/* set up our bulk in urb */
usb_fill_bulk_urb(edge_serial->read_urb, dev,
- usb_rcvbulkpipe(dev, endpoint->bEndpointAddress),
- edge_serial->bulk_in_buffer,
- le16_to_cpu(endpoint->wMaxPacketSize),
- edge_bulk_in_callback,
- edge_serial);
+ usb_rcvbulkpipe(dev,
+ endpoint->bEndpointAddress),
+ edge_serial->bulk_in_buffer,
+ le16_to_cpu(endpoint->wMaxPacketSize),
+ edge_bulk_in_callback,
+ edge_serial);
bulk_in_found = true;
}
@@ -2952,21 +3192,24 @@ static int edge_startup (struct usb_serial *serial)
(usb_endpoint_is_bulk_out(endpoint))) {
/* we found a bulk out endpoint */
dbg("found bulk out");
- edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress;
+ edge_serial->bulk_out_endpoint =
+ endpoint->bEndpointAddress;
bulk_out_found = true;
}
}
if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
- err ("Error - the proper endpoints were not found!");
+ err("Error - the proper endpoints were not found!");
return -ENODEV;
}
/* start interrupt read for this edgeport this interrupt will
* continue as long as the edgeport is connected */
- response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL);
+ response = usb_submit_urb(edge_serial->interrupt_read_urb,
+ GFP_KERNEL);
if (response)
- err("%s - Error %d submitting control urb", __func__, response);
+ err("%s - Error %d submitting control urb",
+ __func__, response);
}
return response;
}
@@ -2976,7 +3219,7 @@ static int edge_startup (struct usb_serial *serial)
* edge_shutdown
* This function is called whenever the device is removed from the usb bus.
****************************************************************************/
-static void edge_shutdown (struct usb_serial *serial)
+static void edge_shutdown(struct usb_serial *serial)
{
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
int i;
@@ -2984,8 +3227,8 @@ static void edge_shutdown (struct usb_serial *serial)
dbg("%s", __func__);
/* stop reads and writes on all ports */
- for (i=0; i < serial->num_ports; ++i) {
- kfree (usb_get_serial_port_data(serial->port[i]));
+ for (i = 0; i < serial->num_ports; ++i) {
+ kfree(usb_get_serial_port_data(serial->port[i]));
usb_set_serial_port_data(serial->port[i], NULL);
}
/* free up our endpoint stuff */
@@ -3025,7 +3268,7 @@ static int __init edgeport_init(void)
if (retval)
goto failed_epic_device_register;
retval = usb_register(&io_driver);
- if (retval)
+ if (retval)
goto failed_usb_register;
atomic_set(&CmdUrbs, 0);
info(DRIVER_DESC " " DRIVER_VERSION);
@@ -3050,19 +3293,19 @@ failed_2port_device_register:
****************************************************************************/
static void __exit edgeport_exit (void)
{
- usb_deregister (&io_driver);
- usb_serial_deregister (&edgeport_2port_device);
- usb_serial_deregister (&edgeport_4port_device);
- usb_serial_deregister (&edgeport_8port_device);
- usb_serial_deregister (&epic_device);
+ usb_deregister(&io_driver);
+ usb_serial_deregister(&edgeport_2port_device);
+ usb_serial_deregister(&edgeport_4port_device);
+ usb_serial_deregister(&edgeport_8port_device);
+ usb_serial_deregister(&epic_device);
}
module_init(edgeport_init);
module_exit(edgeport_exit);
/* Module information */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 2ec8589..7eb9d67 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -8,7 +8,7 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
*/
#ifndef IO_TABLES_H
@@ -90,10 +90,10 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
{ USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
- { } /* Terminating entry */
+ { } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
static struct usb_driver io_driver = {
.name = "io_edgeport",
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/