[PATCH 52/70] tty-usb-keyspan-pda: Coding style
From: Alan Cox
Date: Fri Jun 20 2008 - 16:35:48 EST
From: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
---
drivers/usb/serial/keyspan_pda.c | 168 +++++++++++++++++++++-----------------
1 files changed, 95 insertions(+), 73 deletions(-)
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index a7538d7..928f545 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -10,8 +10,9 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- *
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
+ *
* (09/07/2001) gkh
* cleaned up the Xircom support. Added ids for Entregra device which is
* the same as the Xircom device. Enabled the code to be compiled for
@@ -21,23 +22,24 @@
* support for Xircom PGSDB9
*
* (05/31/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
+ * switched from using spinlock to a semaphore, which fixes lots of
+ * problems.
*
* (04/08/2001) gb
* Identify version on module load.
- *
+ *
* (11/01/2000) Adam J. Richter
* usb_device_id table support
- *
+ *
* (10/05/2000) gkh
* Fixed bug with urb->dev not being set properly, now that the usb
* core needs it.
- *
+ *
* (08/28/2000) gkh
* Added locks for SMP safeness.
- * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
+ * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
* than once.
- *
+ *
* (07/20/2000) borchers
* - keyspan_pda_write no longer sleeps if it is called on interrupt time;
* PPP and the line discipline with stty echo on can call write on
@@ -55,14 +57,14 @@
* than done directly from the callback to avoid the race in write_chan
* - keyspan_pda_chars_in_buffer also indicates its buffer is full if the
* urb status is -EINPROGRESS, meaning it cannot write at the moment
- *
+ *
* (07/19/2000) gkh
* Added module_init and module_exit functions to handle the fact that this
* driver is a loadable module now.
*
* (03/26/2000) gkh
* Split driver up into device specific pieces.
- *
+ *
*/
@@ -76,7 +78,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
@@ -88,7 +90,8 @@ struct ezusb_hex_record {
__u8 data[16];
};
-/* make a simple define to handle if we are compiling keyspan_pda or xircom support */
+/* make a simple define to handle if we are compiling keyspan_pda
+ or xircom support */
#if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE)
#define KEYSPAN
#else
@@ -147,7 +150,7 @@ static struct usb_device_id id_table_combined [] = {
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
static struct usb_driver keyspan_pda_driver = {
.name = "keyspan_pda",
@@ -171,9 +174,9 @@ static struct usb_device_id id_table_fake [] = {
#ifdef XIRCOM
static struct usb_device_id id_table_fake_xircom [] = {
- { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
- { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
- { }
+ { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
+ { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
+ { }
};
#endif
@@ -196,7 +199,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
dbg(" request_unthrottle");
/* ask the device to tell us when the tx buffer becomes
sufficiently empty */
- result = usb_control_msg(serial->dev,
+ result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
7, /* request_unthrottle */
USB_TYPE_VENDOR | USB_RECIP_INTERFACE
@@ -207,15 +210,15 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
0,
2000);
if (result < 0)
- dbg("%s - error %d from usb_control_msg",
+ dbg("%s - error %d from usb_control_msg",
__func__, result);
}
-static void keyspan_pda_rx_interrupt (struct urb *urb)
+static void keyspan_pda_rx_interrupt(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty = port->port.tty;
unsigned char *data = urb->transfer_buffer;
int i;
int retval;
@@ -240,14 +243,13 @@ static void keyspan_pda_rx_interrupt (struct urb *urb)
goto exit;
}
- /* see if the message is data or a status interrupt */
+ /* see if the message is data or a status interrupt */
switch (data[0]) {
case 0:
/* rest of message is rx data */
if (urb->actual_length) {
- for (i = 1; i < urb->actual_length ; ++i) {
+ for (i = 1; i < urb->actual_length ; ++i)
tty_insert_flip_char(tty, data[i], 0);
- }
tty_flip_buffer_push(tty);
}
break;
@@ -271,9 +273,9 @@ static void keyspan_pda_rx_interrupt (struct urb *urb)
}
exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
- err ("%s - usb_submit_urb failed with result %d",
+ err("%s - usb_submit_urb failed with result %d",
__func__, retval);
}
@@ -304,32 +306,52 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
}
-static speed_t keyspan_pda_setbaud (struct usb_serial *serial, speed_t baud)
+static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
{
int rc;
int bindex;
- switch(baud) {
- case 110: bindex = 0; break;
- case 300: bindex = 1; break;
- case 1200: bindex = 2; break;
- case 2400: bindex = 3; break;
- case 4800: bindex = 4; break;
- case 9600: bindex = 5; break;
- case 19200: bindex = 6; break;
- case 38400: bindex = 7; break;
- case 57600: bindex = 8; break;
- case 115200: bindex = 9; break;
- default:
- bindex = 5; /* Default to 9600 */
- baud = 9600;
+ switch (baud) {
+ case 110:
+ bindex = 0;
+ break;
+ case 300:
+ bindex = 1;
+ break;
+ case 1200:
+ bindex = 2;
+ break;
+ case 2400:
+ bindex = 3;
+ break;
+ case 4800:
+ bindex = 4;
+ break;
+ case 9600:
+ bindex = 5;
+ break;
+ case 19200:
+ bindex = 6;
+ break;
+ case 38400:
+ bindex = 7;
+ break;
+ case 57600:
+ bindex = 8;
+ break;
+ case 115200:
+ bindex = 9;
+ break;
+ default:
+ bindex = 5; /* Default to 9600 */
+ baud = 9600;
}
/* rather than figure out how to sleep while waiting for this
to complete, I just use the "legacy" API. */
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
0, /* set baud */
- USB_TYPE_VENDOR
+ USB_TYPE_VENDOR
| USB_RECIP_INTERFACE
| USB_DIR_OUT, /* type */
bindex, /* value */
@@ -355,11 +377,11 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
else
value = 0; /* clear break */
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- 4, /* set break */
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- value, 0, NULL, 0, 2000);
+ 4, /* set break */
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ value, 0, NULL, 0, 2000);
if (result < 0)
- dbg("%s - error %d from usb_control_msg",
+ dbg("%s - error %d from usb_control_msg",
__func__, result);
/* there is something funky about this.. the TCSBRK that 'cu' performs
ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4
@@ -502,10 +524,10 @@ static int keyspan_pda_write(struct tty_struct *tty,
select() or poll() too) until we receive that unthrottle interrupt.
Block if we can't write anything at all, otherwise write as much as
we can. */
- dbg("keyspan_pda_write(%d)",count);
+ dbg("keyspan_pda_write(%d)", count);
if (count == 0) {
dbg(" write request of 0 bytes");
- return (0);
+ return 0;
}
/* we might block because of:
@@ -532,7 +554,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
scheduler time, since usb_control_msg() sleeps. */
if (count > priv->tx_room && !in_interrupt()) {
unsigned char room;
- rc = usb_control_msg(serial->dev,
+ rc = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
6, /* write_room */
USB_TYPE_VENDOR | USB_RECIP_INTERFACE
@@ -563,7 +585,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
if (count) {
/* now transfer data */
- memcpy (port->write_urb->transfer_buffer, buf, count);
+ memcpy(port->write_urb->transfer_buffer, buf, count);
/* send the data out the bulk port */
port->write_urb->transfer_buffer_length = count;
@@ -575,8 +597,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
dbg(" usb_submit_urb(write bulk) failed");
goto exit;
}
- }
- else {
+ } else {
/* There wasn't any room left, so we are throttled until
the buffer empties a bit */
request_unthrottle = 1;
@@ -595,7 +616,7 @@ exit:
}
-static void keyspan_pda_write_bulk_callback (struct urb *urb)
+static void keyspan_pda_write_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct keyspan_pda_private *priv;
@@ -616,7 +637,7 @@ static int keyspan_pda_write_room(struct tty_struct *tty)
/* used by n_tty.c for processing of tabs and such. Giving it our
conservative guess is probably good enough, but needs testing by
running a console through the device. */
- return (priv->tx_room);
+ return priv->tx_room;
}
@@ -674,7 +695,7 @@ static int keyspan_pda_open(struct tty_struct *tty,
/* the normal serial device seems to always turn on DTR and RTS here,
so do the same */
if (tty && (tty->termios->c_cflag & CBAUD))
- keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2) );
+ keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2));
else
keyspan_pda_set_modem_info(serial, 0);
@@ -697,7 +718,8 @@ static void keyspan_pda_close(struct tty_struct *tty,
struct usb_serial *serial = port->serial;
if (serial->dev) {
- /* the normal serial device seems to always shut off DTR and RTS now */
+ /* the normal serial device seems to always shut
+ off DTR and RTS now */
if (tty->termios->c_cflag & HUPCL)
keyspan_pda_set_modem_info(serial, 0);
@@ -709,7 +731,7 @@ static void keyspan_pda_close(struct tty_struct *tty,
/* download the firmware to a "fake" device (pre-renumeration) */
-static int keyspan_pda_fake_startup (struct usb_serial *serial)
+static int keyspan_pda_fake_startup(struct usb_serial *serial)
{
int response;
const struct ezusb_hex_record *record = NULL;
@@ -731,14 +753,14 @@ static int keyspan_pda_fake_startup (struct usb_serial *serial)
return -ENODEV;
}
- while(record->address != 0xffff) {
+ while (record->address != 0xffff) {
response = ezusb_writememory(serial, record->address,
(unsigned char *)record->data,
record->data_size, 0xa0);
if (response < 0) {
err("ezusb_writememory failed for Keyspan PDA "
"firmware (%d %04X %p %d)",
- response,
+ response,
record->address, record->data, record->data_size);
break;
}
@@ -749,10 +771,10 @@ static int keyspan_pda_fake_startup (struct usb_serial *serial)
response = ezusb_set_reset(serial, 0);
/* we want this device to fail to have a driver assigned to it. */
- return (1);
+ return 1;
}
-static int keyspan_pda_startup (struct usb_serial *serial)
+static int keyspan_pda_startup(struct usb_serial *serial)
{
struct keyspan_pda_private *priv;
@@ -762,20 +784,20 @@ static int keyspan_pda_startup (struct usb_serial *serial)
priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
if (!priv)
- return (1); /* error */
+ return 1; /* error */
usb_set_serial_port_data(serial->port[0], priv);
init_waitqueue_head(&serial->port[0]->write_wait);
INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
priv->serial = serial;
priv->port = serial->port[0];
- return (0);
+ return 0;
}
-static void keyspan_pda_shutdown (struct usb_serial *serial)
+static void keyspan_pda_shutdown(struct usb_serial *serial)
{
dbg("%s", __func__);
-
+
kfree(usb_get_serial_port_data(serial->port[0]));
}
@@ -834,7 +856,7 @@ static struct usb_serial_driver keyspan_pda_device = {
};
-static int __init keyspan_pda_init (void)
+static int __init keyspan_pda_init(void)
{
int retval;
retval = usb_serial_register(&keyspan_pda_device);
@@ -855,7 +877,7 @@ static int __init keyspan_pda_init (void)
goto failed_usb_register;
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
-failed_usb_register:
+failed_usb_register:
#ifdef XIRCOM
usb_serial_deregister(&xircom_pgs_fake_device);
failed_xircom_register:
@@ -872,15 +894,15 @@ failed_pda_register:
}
-static void __exit keyspan_pda_exit (void)
+static void __exit keyspan_pda_exit(void)
{
- usb_deregister (&keyspan_pda_driver);
- usb_serial_deregister (&keyspan_pda_device);
+ usb_deregister(&keyspan_pda_driver);
+ usb_serial_deregister(&keyspan_pda_device);
#ifdef KEYSPAN
- usb_serial_deregister (&keyspan_pda_fake_device);
+ usb_serial_deregister(&keyspan_pda_fake_device);
#endif
#ifdef XIRCOM
- usb_serial_deregister (&xircom_pgs_fake_device);
+ usb_serial_deregister(&xircom_pgs_fake_device);
#endif
}
@@ -888,8 +910,8 @@ static void __exit keyspan_pda_exit (void)
module_init(keyspan_pda_init);
module_exit(keyspan_pda_exit);
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/