Re: Bisecting tip/auto-x86-next?
From: Kevin Winchester
Date: Sat Jun 21 2008 - 06:00:34 EST
Yinghai Lu wrote:
On Fri, Jun 20, 2008 at 5:00 PM, Kevin Winchester
<kjwinchester@xxxxxxxxx> wrote:
Ingo Molnar wrote:
* Kevin Winchester <kjwinchester@xxxxxxxxx> wrote:
hm, could you send me the config that triggered this?
I will do so tonight when I am home again. It is a UP AMD64 box with a
VIA chipset, if that helps.
btw., you can probably ignore this one safely. Also please tell me at
which commit ID you were at when you triggered this warning.
Good to know - I will get the commit ID tonight as well, although
wouldn't following the same bisection sequence that I did give you the same
bisection point? I guess that would assume that linus/master and
auto-x86-next haven't changed much since last night, which might not be
correct.
yeah, you'd probably not hit that warning with the x86/gart bisection
sequence. (Assuming the bug is introduced in that branch - so you should
first check whether pure x86/gart kernel triggers the problem too.)
If you still have the commit ID around then please send it - if you dont,
no problem, it's no big issue. I wanted to check how wide the bisection
window is where the warning triggers.
I'm sorry - I accidentally checkout out x86/gart to test it before grabbing
the commit ID.
I went ahead with the bisection and found:
8c9fd91a0dc503f085169d44f4360be025f75224 is first bad commit
commit 8c9fd91a0dc503f085169d44f4360be025f75224
Author: Yinghai Lu <yhlu.kernel@xxxxxxxxx>
Date: Sun Apr 13 18:42:31 2008 -0700
x86: checking aperture size order
some systems are using 32M for gart and agp when memory is less than 4G.
Kernel will reject and try to allcate another 64M that is not needed,
and we will waste 64M of perfectly good RAM.
this patch adds a workaround by checking aper_base/order between NB and
agp bridge. If they are the same, and memory size is less than 4G, it
will allow it.
Signed-off-by: Yinghai Lu <yhlu.kernel@xxxxxxxxx>
Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
:040000 040000 848d6e4045a14d01fc0a794d4350d8a84f3ceff6
4a10a52b41309060cd5dc1bf0c322f6d43b2477b M arch
:040000 040000 aa1cee87b1f5b1b30ed03ce6164ad7f404fef2a3
f9ce0aaa1f7d4fdc7bdc5a43285495db53a6f531 M drivers
as the first bad commit. I do not have time to look at the patch right now,
but in case anyone else does, I figured I would post it.
please send out whole boot logs with "debug" in command line.
"debug" in the command line doesn't seem to have any effect on the
printout (is there some config option I need to use with it?), but here
it is anyway:
[ 0.000000] Linux version 2.6.26-rc2-00003-g8c9fd91 (kevin@alekhine)
(gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #53 PREEMPT Sat Jun 21
06:53:46 ADT 2008
[ 0.000000] Command line: root=/dev/sda1 ro hpet=force debug
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] update e820 for GART
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] modified: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] modified: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000e8000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 261872) 1 entries of
256 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F77D0, 0014 (r0 VIAK8T)
[ 0.000000] ACPI: RSDT 3FEF3040, 0034 (r1 VIAK8T AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 VIAK8T AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: DSDT 3FEF3180, 4F8A (r1 VIAK8T AWRDACPI 1000
MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEF0000, 0040
[ 0.000000] ACPI: BOOT 3FEF8180, 0028 (r1 VIAK8T AWRDACPI 42302E31
AWRD 0)
[ 0.000000] ACPI: SSDT 3FEF82C0, 00B5 (r1 PTLTD POWERNOW 1
LTP 1)
[ 0.000000] ACPI: APIC 3FEF8200, 0068 (r1 VIAK8T AWRDACPI 42302E31
AWRD 0)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 261872) 1 entries of
256 used
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-b0c907] TEXT DATA BSS
[ 0.000000] early res: 3 [9f800-fffff] BIOS reserved
[ 0.000000] early res: 4 [8000-afff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD ->
[ffff810001200000-ffff810001ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 261872
[ 0.000000] On node 0 totalpages: 261775
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2420 pages reserved
[ 0.000000] DMA zone: 1523 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3524 pages used for memmap
[ 0.000000] DMA32 zone: 254252 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Looks like a VIA chipset. Disabling IOMMU. Override with
iommu=allowed
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3ff00000:a0100000)
[4294014.506571] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 255775
[4294014.506571] Kernel command line: root=/dev/sda1 ro hpet=force debug
[4294014.506571] Initializing CPU#0
[4294014.506571] Preemptible RCU implementation.
[4294014.506571] PID hash table entries: 4096 (order: 12, 32768 bytes)
[4294014.506571] TSC calibrated against PM_TIMER
[4294014.506571] time.c: Detected 1804.093 MHz processor.
[4294014.506571] Console: colour VGA+ 80x25
[4294014.506571] console [tty0] enabled
[4294014.506571] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[4294014.506571] ... MAX_LOCKDEP_SUBCLASSES: 8
[4294014.506571] ... MAX_LOCK_DEPTH: 48
[4294014.506571] ... MAX_LOCKDEP_KEYS: 2048
[4294014.506571] ... CLASSHASH_SIZE: 1024
[4294014.506571] ... MAX_LOCKDEP_ENTRIES: 8192
[4294014.506571] ... MAX_LOCKDEP_CHAINS: 16384
[4294014.506571] ... CHAINHASH_SIZE: 8192
[4294014.506571] memory used by lock dependency info: 1648 kB
[4294014.506571] per task-struct memory footprint: 2688 bytes
[4294014.506571] ------------------------
[4294014.506571] | Locking API testsuite:
[4294014.506571]
----------------------------------------------------------------------------
[4294014.506571] | spin |wlock |rlock
|mutex | wsem | rsem |
[4294014.506571]
--------------------------------------------------------------------------
[4294014.506571] A-A deadlock: ok | ok | ok |
ok | ok | ok |
[4294014.506571] A-B-B-A deadlock: ok | ok | ok |
ok | ok | ok |
[4294014.506571] A-B-B-C-C-A deadlock: ok | ok | ok |
ok | ok | ok |
[4294014.506571] A-B-C-A-B-C deadlock: ok | ok | ok |
ok | ok | ok |
[4294014.506571] A-B-B-C-C-D-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[4294014.506571] A-B-C-D-B-D-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[4294014.506571] A-B-C-D-B-C-D-A deadlock: ok | ok | ok |
ok | ok | ok |
[4294014.506571] double unlock: ok | ok | ok |
ok | ok | ok |
[4294014.506571] initialize held: ok | ok | ok |
ok | ok | ok |
[4294014.506571] bad unlock order: ok | ok | ok |
ok | ok | ok |
[4294014.506571]
--------------------------------------------------------------------------
[4294014.506571] recursive read-lock: | ok |
| ok |
[4294014.506571] recursive read-lock #2: | ok |
| ok |
[4294014.506571] mixed read-write-lock: | ok |
| ok |
[4294014.506571] mixed write-read-lock: | ok |
| ok |
[4294014.506571]
--------------------------------------------------------------------------
[4294014.506571] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[4294014.506571] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[4294014.506571] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[4294014.506571] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[4294014.506571] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[4294014.506571] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[4294014.506571] hard-safe-A + irqs-on/12: ok | ok | ok |
[4294014.506571] soft-safe-A + irqs-on/12: ok | ok | ok |
[4294014.506571] hard-safe-A + irqs-on/21: ok | ok | ok |
[4294014.506571] soft-safe-A + irqs-on/21: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[4294014.506571] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[4294014.506571] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[4294014.506571] hard-irq lock-inversion/123: ok | ok | ok |
[4294014.506571] soft-irq lock-inversion/123: ok | ok | ok |
[4294014.506571] hard-irq lock-inversion/132: ok | ok | ok |
[4294014.506571] soft-irq lock-inversion/132: ok | ok | ok |
[4294014.506571] hard-irq lock-inversion/213: ok | ok | ok |
[4294014.506571] soft-irq lock-inversion/213: ok | ok | ok |
[4294014.506571] hard-irq lock-inversion/231: ok | ok | ok |
[4294014.506571] soft-irq lock-inversion/231: ok | ok | ok |
[4294014.506571] hard-irq lock-inversion/312: ok | ok | ok |
[4294014.506571] soft-irq lock-inversion/312: ok | ok | ok |
[4294014.506571] hard-irq lock-inversion/321: ok | ok | ok |
[4294014.506571] soft-irq lock-inversion/321: ok | ok | ok |
[4294014.506571] hard-irq read-recursion/123: ok |
[4294014.506571] soft-irq read-recursion/123: ok |
[4294014.506571] hard-irq read-recursion/132: ok |
[4294014.506571] soft-irq read-recursion/132: ok |
[4294014.506571] hard-irq read-recursion/213: ok |
[4294014.506571] soft-irq read-recursion/213: ok |
[4294014.506571] hard-irq read-recursion/231: ok |
[4294014.506571] soft-irq read-recursion/231: ok |
[4294014.506571] hard-irq read-recursion/312: ok |
[4294014.506571] soft-irq read-recursion/312: ok |
[4294014.506571] hard-irq read-recursion/321: ok |
[4294014.506571] soft-irq read-recursion/321: ok |
[4294014.506571] -------------------------------------------------------
[4294014.506571] Good, all 218 testcases passed! |
[4294014.506571] ---------------------------------
[4294014.506571] Dentry cache hash table entries: 131072 (order: 8,
1048576 bytes)
[4294014.506571] Inode-cache hash table entries: 65536 (order: 7, 524288
bytes)
[4294014.506571] Memory: 1021212k/1047488k available (2715k kernel code,
25316k reserved, 1315k data, 204k init)
[4294014.506571] CPA: page pool initialized 1 of 1 pages preallocated
[4294014.506571] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[4294014.566594] Calibrating delay using timer specific routine..
3611.98 BogoMIPS (lpj=1805993)
[4294014.566707] Mount-cache hash table entries: 256
[4294014.567359] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[4294014.567403] CPU: L2 Cache: 512K (64 bytes/line)
[4294014.567445] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
[4294014.567512] ACPI: Core revision 20080321
[4294014.587546] Using local APIC timer interrupts.
[4294014.589558] APIC timer calibration result 12528424
[4294014.589558] Detected 12.528 MHz APIC timer.
[4294014.589558] net_namespace: 456 bytes
[4294014.589558] NET: Registered protocol family 16
[4294014.590073] No dock devices found.
[4294014.590309] node 0 link 0: io port [1000, fffff]
[4294014.590338] TOM: 0000000040000000 aka 1024M
[4294014.590365] node 0 link 0: mmio [a0000, bffff]
[4294014.590401] node 0 link 0: mmio [40000000, ff70ffff]
[4294014.590438] bus: [00,ff] on node 0 link 0
[4294014.590464] bus: 00 index 0 io port: [0, ffff]
[4294014.590491] bus: 00 index 1 mmio: [a0000, bffff]
[4294014.590517] bus: 00 index 2 mmio: [40000000, fcffffffff]
[4294014.590558] ACPI: bus type pci registered
[4294014.590603] PCI: Using configuration type 1 for base access
[4294014.595977] ACPI: EC: Look up EC in DSDT
[4294014.607934] ACPI: Interpreter enabled
[4294014.607966] ACPI: (supports S0 S3 S5)
[4294014.608061] ACPI: Using IOAPIC for interrupt routing
[4294014.619360] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294014.620741] pci 0000:00:11.0: Force enabled HPET at 0xfed00000
[4294014.621197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294014.705272] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
[4294014.705659] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[4294014.706025] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[4294014.706355] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12)
*0, disabled.
[4294014.706716] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12)
*0, disabled.
[4294014.707099] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12)
*0, disabled.
[4294014.707470] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 *10 11 12)
[4294014.707819] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 *10 11 12)
[4294014.708197] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[4294014.708506] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[4294014.708825] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[4294014.709186] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[4294014.709585] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294014.709683] pnp: PnP ACPI init
[4294014.709733] ACPI: bus type pnp registered
[4294014.715829] pnp: PnP ACPI: found 10 devices
[4294014.715864] ACPI: ACPI bus type pnp unregistered
[4294014.716251] SCSI subsystem initialized
[4294014.716342] libata version 3.00 loaded.
[4294014.716606] usbcore: registered new interface driver usbfs
[4294014.716706] usbcore: registered new interface driver hub
[4294014.716845] usbcore: registered new device driver usb
[4294014.717558] PCI: Using ACPI for IRQ routing
[4294014.717597] PCI: Cannot allocate resource region 0 of device
0000:00:00.0
[4294014.727717] agpgart: Detected AGP bridge 0
[4294014.727750] agpgart: Aperture conflicts with PCI mapping.
[4294014.727785] agpgart: Aperture from AGP @ e0000000 size 128 MB
[4294014.727816] agpgart: Aperture conflicts with PCI mapping.
[4294014.727846] agpgart: No usable aperture found.
[4294014.727874] agpgart: Consider rebooting with iommu=memaper=2 to get
a good aperture.
[4294014.728175] hpet clockevent registered
[4294014.728205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[4294014.728270] hpet0: 3 32-bit timers, 14318180 Hz
[4294014.729438] ACPI: RTC can wake from S4
[4294014.739570] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[4294014.739602] system 00:00: iomem range 0xf0000-0xf7fff could not be
reserved
[4294014.739633] system 00:00: iomem range 0xf8000-0xfbfff could not be
reserved
[4294014.739664] system 00:00: iomem range 0xfc000-0xfffff could not be
reserved
[4294014.739695] system 00:00: iomem range 0x3ff00000-0x3fffffff has
been reserved
[4294014.739736] system 00:00: iomem range 0x3fef0000-0x3fefffff could
not be reserved
[4294014.739778] system 00:00: iomem range 0xffff0000-0xffffffff could
not be reserved
[4294014.739819] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[4294014.739850] system 00:00: iomem range 0x100000-0x3feeffff could not
be reserved
[4294014.739891] system 00:00: iomem range 0xfec00000-0xfec00fff could
not be reserved
[4294014.739933] system 00:00: iomem range 0xfee00000-0xfee00fff could
not be reserved
[4294014.739975] system 00:00: iomem range 0xfff80000-0xfffeffff could
not be reserved
[4294014.740027] system 00:02: ioport range 0x4000-0x407f has been reserved
[4294014.740058] system 00:02: ioport range 0x5000-0x500f has been reserved
[4294014.740098] system 00:03: ioport range 0xb78-0xb7b has been reserved
[4294014.740128] system 00:03: ioport range 0xf78-0xf7b has been reserved
[4294014.740158] system 00:03: ioport range 0xa78-0xa7b has been reserved
[4294014.740188] system 00:03: ioport range 0xe78-0xe7b has been reserved
[4294014.740218] system 00:03: ioport range 0xbbc-0xbbf has been reserved
[4294014.740248] system 00:03: ioport range 0xfbc-0xfbf has been reserved
[4294014.740278] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[4294014.740308] system 00:03: ioport range 0x290-0x297 has been reserved
[4294014.741461] PCI: Bridge: 0000:00:01.0
[4294014.741489] IO window: c000-cfff
[4294014.741518] MEM window: 0xf8000000-0xf80fffff
[4294014.741554] PREFETCH window: 0x00000000e8000000-0x00000000f7ffffff
[4294014.741602] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294014.741648] NET: Registered protocol family 2
[4294014.775651] IP route cache hash table entries: 32768 (order: 6,
262144 bytes)
[4294014.776315] TCP established hash table entries: 131072 (order: 9,
2097152 bytes)
[4294014.777732] TCP bind hash table entries: 65536 (order: 9, 3670016
bytes)
[4294014.783659] TCP: Hash tables configured (established 131072 bind 65536)
[4294014.783721] TCP reno registered
[4294014.795637] NET: Registered protocol family 1
[4294014.795940] Simple Boot Flag at 0x37 set to 0x1
[4294014.804867] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[4294014.804923] io scheduler noop registered
[4294014.805073] io scheduler cfq registered (default)
[4294014.805122] PCI: VIA PCI bridge detected.Disabling DAC.
[4294014.805265] pci 0000:01:00.0: Boot video device
[4294014.805580] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[4294014.805650] ACPI: Power Button (FF) [PWRF]
[4294014.805840] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[4294014.805884] ACPI: Power Button (CM) [PWRB]
[4294014.806522] ACPI: ACPI0007:00 is registered as cooling_device0
[4294014.835953] Linux agpgart interface v0.103
[4294014.836063] [drm] Initialized drm 1.1.0 20060810
[4294014.837008] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level,
low) -> IRQ 16
[4294014.837225] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[4294014.838309] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180
seconds, margin is 60 seconds).
[4294014.838351] Hangcheck: Using get_cycles().
[4294014.838566] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[4294014.838747] VIA Networking Velocity Family Gigabit Ethernet Adapter
Driver Ver. 1.14
[4294014.838789] Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
[4294014.838818] Copyright (c) 2004 Red Hat Inc.
[4294014.838858] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 22 (level,
low) -> IRQ 22
[4294014.840052] eth0: VIA Networking Velocity Family Gigabit Ethernet
Adapter
[4294014.840084] eth0: Ethernet Address: 00:50:8D:D1:28:BB
[4294014.850648] PPP generic driver version 2.4.2
[4294014.850942] PPP MPPE Compression module registered
[4294014.851367] Driver 'sd' needs updating - please use bus_type methods
[4294014.851464] Driver 'sr' needs updating - please use bus_type methods
[4294014.851782] sata_via 0000:00:0f.0: version 2.3
[4294014.852160] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294014.852198] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] ->
GSI 20 (level, low) -> IRQ 20
[4294014.852334] sata_via 0000:00:0f.0: routed to hard irq line 11
[4294014.852463] scsi0 : sata_via
[4294014.852829] scsi1 : sata_via
[4294014.853039] ata1: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma
0xe200 irq 20
[4294014.853080] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma
0xe208 irq 20
[4294015.053537] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[4294015.238139] Switched to high resolution mode on CPU 0
[4294015.275517] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[4294015.278478] pata_via 0000:00:0f.1: version 0.3.3
[4294015.278525] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] ->
GSI 20 (level, low) -> IRQ 20
[4294015.278575] scsi2 : pata_via
[4294015.280804] scsi3 : pata_via
[4294015.284094] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma
0xe400 irq 14
[4294015.284125] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma
0xe408 irq 15
[4294015.437925] ata3.00: ATAPI: COMPAQ DVD-ROM DRD-8120B, 1.10, max
UDMA/33
[4294015.437971] ata3.01: ATAPI: HL-DT-ST GCE-8525B, 1.03, max UDMA/33
[4294015.443795] ata3.00: configured for UDMA/33
[4294015.449794] ata3.01: configured for UDMA/33
[4294015.615040] ata4.00: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100
[4294015.615071] ata4.00: 156301488 sectors, multi 16: LBA
[4294015.617901] ata4.00: configured for UDMA/100
[4294015.618035] isa bounce pool size: 16 pages
[4294015.618589] scsi 2:0:0:0: CD-ROM COMPAQ DVD-ROM
DRD8120B 1.10 PQ: 0 ANSI: 5
[4294015.621794] sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[4294015.621824] Uniform CD-ROM driver Revision: 3.20
[4294015.622294] sr 2:0:0:0: Attached scsi CD-ROM sr0
[4294015.622599] sr 2:0:0:0: Attached scsi generic sg0 type 5
[4294015.623278] scsi 2:0:1:0: CD-ROM HL-DT-ST CD-RW
GCE-8525B 1.03 PQ: 0 ANSI: 5
[4294015.626460] sr1: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2
cdda tray
[4294015.626750] sr 2:0:1:0: Attached scsi CD-ROM sr1
[4294015.626962] sr 2:0:1:0: Attached scsi generic sg1 type 5
[4294015.627224] scsi 3:0:0:0: Direct-Access ATA WDC
WD800JB-00JJ 05.0 PQ: 0 ANSI: 5
[4294015.627726] sd 3:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[4294015.627794] sd 3:0:0:0: [sda] Write Protect is off
[4294015.627822] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[4294015.627902] sd 3:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[4294015.628320] sd 3:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[4294015.628391] sd 3:0:0:0: [sda] Write Protect is off
[4294015.628421] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[4294015.628504] sd 3:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[4294015.628553] sda: sda1 sda2 < sda5 sda6 >
[4294015.663111] sd 3:0:0:0: [sda] Attached SCSI disk
[4294015.663325] sd 3:0:0:0: Attached scsi generic sg2 type 0
[4294015.663741] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 23 (level,
low) -> IRQ 23
[4294015.722583] firewire_ohci: Added fw-ohci device 0000:00:07.0, OHCI
version 1.0
[4294015.722878] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level,
low) -> IRQ 21
[4294015.722937] ehci_hcd 0000:00:10.4: EHCI Host Controller
[4294015.723544] ehci_hcd 0000:00:10.4: new USB bus registered, assigned
bus number 1
[4294015.723662] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf8121000
[4294015.729587] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[4294015.730135] usb usb1: configuration #1 chosen from 1 choice
[4294015.730303] hub 1-0:1.0: USB hub found
[4294015.730366] hub 1-0:1.0: 8 ports detected
[4294015.830956] USB Universal Host Controller Interface driver v3.0
[4294015.831061] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level,
low) -> IRQ 21
[4294015.831122] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294015.831253] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 2
[4294015.831317] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e500
[4294015.831664] usb usb2: configuration #1 chosen from 1 choice
[4294015.831788] hub 2-0:1.0: USB hub found
[4294015.831859] hub 2-0:1.0: 2 ports detected
[4294015.932797] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level,
low) -> IRQ 21
[4294015.932853] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294015.932979] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 3
[4294015.933040] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e600
[4294015.933392] usb usb3: configuration #1 chosen from 1 choice
[4294015.933513] hub 3-0:1.0: USB hub found
[4294015.933550] hub 3-0:1.0: 2 ports detected
[4294015.985646] hub 1-0:1.0: unable to enumerate USB device on port 1
[4294016.034756] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level,
low) -> IRQ 21
[4294016.034813] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294016.034940] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 4
[4294016.035001] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e700
[4294016.035336] usb usb4: configuration #1 chosen from 1 choice
[4294016.035459] hub 4-0:1.0: USB hub found
[4294016.035496] hub 4-0:1.0: 2 ports detected
[4294016.135753] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level,
low) -> IRQ 21
[4294016.135809] uhci_hcd 0000:00:10.3: UHCI Host Controller
[4294016.135935] uhci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 5
[4294016.135998] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e800
[4294016.136336] usb usb5: configuration #1 chosen from 1 choice
[4294016.136455] hub 5-0:1.0: USB hub found
[4294016.136492] hub 5-0:1.0: 2 ports detected
[4294016.140603] hub 1-0:1.0: unable to enumerate USB device on port 2
[4294016.222985] firewire_core: created device fw0: GUID
00508d0000d028bb, S400
[4294016.346588] usb 2-1: new low speed USB device using uhci_hcd and
address 2
[4294016.474582] usb 2-1: configuration #1 chosen from 1 choice
[4294016.715588] usb 2-2: new low speed USB device using uhci_hcd and
address 3
[4294016.847573] usb 2-2: configuration #1 chosen from 1 choice
[4294016.889752] usbcore: registered new interface driver usblp
[4294016.889783] Initializing USB Mass Storage driver...
[4294017.097706] usbcore: registered new interface driver usb-storage
[4294017.097737] USB Mass Storage support registered.
[4294017.098077] PNP: No PS/2 controller found. Probing ports directly.
[4294017.100530] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294017.100575] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294017.100964] mice: PS/2 mouse device common for all mice
[4294017.122020] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[4294017.122081] rtc0: alarms up to one year, y3k
[4294017.122177] i2c /dev entries driver
[4294017.146603] w83627hf: Found W83627HF chip at 0x290
[4294017.286574] w83627hf w83627hf.656: Enabling temp2, readings might
not make sense
[4294017.286574] w83627hf w83627hf.656: Enabling temp3, readings might
not make sense
[4294017.512660] abituguru: testing bank1 sensor 0
[4294017.534773] abituguru: alarm not raised during volt sensor test
[4294017.588582] abituguru: found temp sensor
[4294017.590583] abituguru: testing bank1 sensor 1
[4294017.612024] abituguru: alarm not raised during volt sensor test
[4294017.664582] abituguru: found temp sensor
[4294017.666583] abituguru: testing bank1 sensor 3
[4294017.690582] abituguru: found volt sensor
[4294017.692583] abituguru: testing bank1 sensor 4
[4294017.716582] abituguru: found volt sensor
[4294017.718583] abituguru: testing bank1 sensor 10
[4294017.740486] abituguru: found volt sensor
[4294017.742582] abituguru: testing bank1 sensor 8
[4294017.766582] abituguru: found volt sensor
[4294017.768583] abituguru: testing bank1 sensor 14
[4294017.792582] abituguru: found volt sensor
[4294017.794583] abituguru: testing bank1 sensor 2
[4294017.818582] abituguru: found volt sensor
[4294017.820583] abituguru: testing bank1 sensor 9
[4294017.844732] abituguru: found volt sensor
[4294017.846653] abituguru: testing bank1 sensor 6
[4294017.868473] abituguru: found volt sensor
[4294017.870582] abituguru: testing bank1 sensor 5
[4294017.894582] abituguru: found volt sensor
[4294017.896583] abituguru: testing bank1 sensor 11
[4294017.920582] abituguru: found volt sensor
[4294017.922654] abituguru: testing bank1 sensor 15
[4294017.944764] abituguru: alarm not raised during volt sensor test
[4294017.996451] abituguru: found temp sensor
[4294017.998582] abituguru: testing bank1 sensor 13
[4294018.022582] abituguru: found volt sensor
[4294018.024708] abituguru: testing bank1 sensor 7
[4294018.046758] abituguru: alarm not raised during volt sensor test
[4294018.099582] abituguru: alarm not raised during temp sensor test
[4294018.101583] abituguru: testing bank1 sensor 12
[4294018.124582] abituguru: alarm not raised during volt sensor test
[4294018.176758] abituguru: alarm not raised during temp sensor test
[4294018.177701] abituguru: detecting number of fan sensors
[4294018.177729] abituguru: bank2 sensor 5 does not seem to be a fan
sensor: the threshold (0) is below the minimum (5)
[4294018.177774] abituguru: found: 5 fan sensors
[4294018.177807] abituguru: detecting number of PWM outputs
[4294018.177835] abituguru: pwm channel 3 does not seem to be a pwm
channel: settings[0] = C9
[4294018.177876] abituguru: found: 3 PWM outputs
[4294018.177907] abituguru: found Abit uGuru
[4294018.178700] WDT driver for the Winbond(TM) W83627HF/THF/HG Super
I/O chip initialising.
[4294018.178845] w83627hf/thf/hg WDT: initialized. timeout=60 sec
(nowayout=0)
[4294018.178895] cpuidle: using governor ladder
[4294018.178922] cpuidle: using governor menu
[4294018.193574] input: Logitech USB Mouse as
/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input2
[4294018.217664] input: USB HID v1.10 Mouse [Logitech USB Mouse] on
usb-0000:00:10.0-1
[4294018.230585] input: Microsoft Microsoftï Digital Media Pro Keyboard
as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input3
[4294018.254662] input: USB HID v1.11 Keyboard [Microsoft Microsoftï
Digital Media Pro Keyboard] on usb-0000:00:10.0-2
[4294018.273573] input: Microsoft Microsoftï Digital Media Pro Keyboard
as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input4
[4294018.305661] input: USB HID v1.11 Device [Microsoft Microsoftï
Digital Media Pro Keyboard] on usb-0000:00:10.0-2
[4294018.305794] usbcore: registered new interface driver usbhid
[4294018.305825] usbhid: v2.6:USB HID core driver
[4294018.305977] Advanced Linux Sound Architecture Driver Version 1.0.16.
[4294018.309575] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level,
low) -> IRQ 22
[4294018.309575] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294018.825716] ALSA device list:
[4294018.825746] #0: VIA 8237 with ALC658D at 0xd800, irq 22
[4294018.826596] GRE over IPv4 tunneling driver
[4294018.827292] TCP cubic registered
[4294018.827320] NET: Registered protocol family 17
[4294018.827372] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+
processors (1 cpu cores) (version 2.20.00)
[4294018.827525] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
[4294018.827553] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[4294018.828513] rtc_cmos 00:05: setting system clock to 2008-06-21
09:56:22 UTC (1214042182)
[4294018.847573] kjournald starting. Commit interval 5 seconds
[4294018.847573] EXT3-fs: mounted filesystem with ordered data mode.
[4294018.847573] VFS: Mounted root (ext3 filesystem) readonly.
[4294018.847573] Freeing unused kernel memory: 204k freed
[4294018.847573] Write protecting the kernel read-only data: 3696k
[4294018.860730] Testing CPA: undo ffffffff804b3000-ffffffff805a5000
[4294018.860790] Testing CPA: again
[4294019.010751] Marking TSC unstable due to cpufreq changes
[4294019.227590] Clocksource tsc unstable (delta = -98945211 ns)
[4294026.855875] Adding 1502036k swap on /dev/sda5. Priority:-1
extents:1 across:1502036k
[4294027.202534] EXT3 FS on sda1, internal journal
[4294027.967603] kjournald starting. Commit interval 5 seconds
[4294027.967603] EXT3 FS on sda6, internal journal
[4294027.967603] EXT3-fs: mounted filesystem with ordered data mode.
[4294030.341591] warning: `avahi-daemon' uses 32-bit capabilities
(legacy support in use)
[4294033.364577] Velocity is AUTO mode
[4294035.043577] eth0: Link auto-negotiation speed 100M bps full duplex
[4294044.796597] CPA self-test:
[4294044.809748] 4k 2560 large 1019 gb 0 x
96[ffff8100000a0000-ffff8100000ff000] miss 524288
[4294044.832917] 4k 109056 large 811 gb 0 x
96[ffff8100000a0000-ffff8100000ff000] miss 524288
[4294044.853936] 4k 109056 large 811 gb 0 x
96[ffff8100000a0000-ffff8100000ff000] miss 524288
[4294044.856902] ok.
--
Kevin Winchester
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/