[PATCH] saa7146: ->cpu_addr and friends are little-endian
From: Al Viro
Date: Sun Jun 22 2008 - 10:19:30 EST
Annotations + stop saa7146_i2c from playing fast and loose with
reuse of ->cpu_addr for host-endian.
Signed-off-by: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
---
drivers/media/common/saa7146_core.c | 4 ++--
drivers/media/common/saa7146_hlp.c | 2 +-
drivers/media/common/saa7146_i2c.c | 34 +++++++++++++++++-----------------
drivers/media/common/saa7146_video.c | 4 ++--
include/media/saa7146.h | 4 ++--
5 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 89c7660..d01965e 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -233,7 +233,7 @@ void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt)
int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
{
- u32 *cpu;
+ __le32 *cpu;
dma_addr_t dma_addr;
cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr);
@@ -250,7 +250,7 @@ int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt,
struct scatterlist *list, int sglen )
{
- u32 *ptr, fill;
+ __le32 *ptr, fill;
int nr_pages = 0;
int i,p;
diff --git a/drivers/media/common/saa7146_hlp.c b/drivers/media/common/saa7146_hlp.c
index 9c90539..05bde9c 100644
--- a/drivers/media/common/saa7146_hlp.c
+++ b/drivers/media/common/saa7146_hlp.c
@@ -338,7 +338,7 @@ static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct sa
struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
{
struct saa7146_vv *vv = dev->vv_data;
- u32 *clipping = vv->d_clipping.cpu_addr;
+ __le32 *clipping = vv->d_clipping.cpu_addr;
int width = fh->ov.win.w.width;
int height = fh->ov.win.w.height;
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 35b01ec..c11da4d 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -24,7 +24,7 @@ static inline u32 saa7146_i2c_status(struct saa7146_dev *dev)
sent through the saa7146. have a look at the specifications p. 122 ff
to understand this. it returns the number of u32s to send, or -1
in case of an error. */
-static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, u32 *op)
+static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, __le32 *op)
{
int h1, h2;
int i, j, addr;
@@ -47,7 +47,7 @@ static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, u32 *op)
}
/* be careful: clear out the i2c-mem first */
- memset(op,0,sizeof(u32)*mem);
+ memset(op,0,sizeof(__le32)*mem);
/* loop through all messages */
for(i = 0; i < num; i++) {
@@ -57,16 +57,16 @@ static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, u32 *op)
so we have to perform a translation */
addr = (m[i].addr*2) + ( (0 != (m[i].flags & I2C_M_RD)) ? 1 : 0);
h1 = op_count/3; h2 = op_count%3;
- op[h1] |= ( (u8)addr << ((3-h2)*8));
- op[h1] |= (SAA7146_I2C_START << ((3-h2)*2));
+ op[h1] |= cpu_to_le32( (u8)addr << ((3-h2)*8));
+ op[h1] |= cpu_to_le32(SAA7146_I2C_START << ((3-h2)*2));
op_count++;
/* loop through all bytes of message i */
for(j = 0; j < m[i].len; j++) {
/* insert the data bytes */
h1 = op_count/3; h2 = op_count%3;
- op[h1] |= ( (u32)((u8)m[i].buf[j]) << ((3-h2)*8));
- op[h1] |= ( SAA7146_I2C_CONT << ((3-h2)*2));
+ op[h1] |= cpu_to_le32( (u32)((u8)m[i].buf[j]) << ((3-h2)*8));
+ op[h1] |= cpu_to_le32( SAA7146_I2C_CONT << ((3-h2)*2));
op_count++;
}
@@ -75,9 +75,9 @@ static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, u32 *op)
/* have a look at the last byte inserted:
if it was: ...CONT change it to ...STOP */
h1 = (op_count-1)/3; h2 = (op_count-1)%3;
- if ( SAA7146_I2C_CONT == (0x3 & (op[h1] >> ((3-h2)*2))) ) {
- op[h1] &= ~(0x2 << ((3-h2)*2));
- op[h1] |= (SAA7146_I2C_STOP << ((3-h2)*2));
+ if ( SAA7146_I2C_CONT == (0x3 & (le32_to_cpu(op[h1]) >> ((3-h2)*2))) ) {
+ op[h1] &= ~cpu_to_le32(0x2 << ((3-h2)*2));
+ op[h1] |= cpu_to_le32(SAA7146_I2C_STOP << ((3-h2)*2));
}
/* return the number of u32s to send */
@@ -88,7 +88,7 @@ static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, u32 *op)
which bytes were read through the adapter and write them back to the corresponding
i2c-message. but instead, we simply write back all bytes.
fixme: this could be improved. */
-static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, u32 *op)
+static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op)
{
int i, j;
int op_count = 0;
@@ -101,7 +101,7 @@ static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, u32 *op)
/* loop throgh all bytes of message i */
for(j = 0; j < m[i].len; j++) {
/* write back all bytes that could have been read */
- m[i].buf[j] = (op[op_count/3] >> ((3-(op_count%3))*8));
+ m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8));
op_count++;
}
}
@@ -174,7 +174,7 @@ static int saa7146_i2c_reset(struct saa7146_dev *dev)
/* this functions writes out the data-byte 'dword' to the i2c-device.
it returns 0 if ok, -1 if the transfer failed, -2 if the transfer
failed badly (e.g. address error) */
-static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_delay)
+static int saa7146_i2c_writeout(struct saa7146_dev *dev, __le32 *dword, int short_delay)
{
u32 status = 0, mc2 = 0;
int trial = 0;
@@ -186,7 +186,7 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d
if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
- saa7146_write(dev, I2C_TRANSFER, *dword);
+ saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
dev->i2c_op = 1;
SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
@@ -209,7 +209,7 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d
status = saa7146_read(dev, I2C_STATUS);
} else {
saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
- saa7146_write(dev, I2C_TRANSFER, *dword);
+ saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
saa7146_write(dev, MC2, (MASK_00 | MASK_16));
/* do not poll for i2c-status before upload is complete */
@@ -282,7 +282,7 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d
}
/* read back data, just in case we were reading ... */
- *dword = saa7146_read(dev, I2C_TRANSFER);
+ *dword = cpu_to_le32(saa7146_read(dev, I2C_TRANSFER));
DEB_I2C(("after: 0x%08x\n",*dword));
return 0;
@@ -291,7 +291,7 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d
static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries)
{
int i = 0, count = 0;
- u32* buffer = dev->d_i2c.cpu_addr;
+ __le32 *buffer = dev->d_i2c.cpu_addr;
int err = 0;
int address_err = 0;
int short_delay = 0;
@@ -376,7 +376,7 @@ out:
/* another bug in revision 0: the i2c-registers get uploaded randomly by other
uploads, so we better clear them out before continueing */
if( 0 == dev->revision ) {
- u32 zero = 0;
+ __le32 zero = 0;
saa7146_i2c_reset(dev);
if( 0 != saa7146_i2c_writeout(dev, &zero, short_delay)) {
INFO(("revision 0 error. this should never happen.\n"));
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 3cbc6eb..a5e6275 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -605,8 +605,8 @@ static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *bu
struct saa7146_pgtable *pt1 = &buf->pt[0];
struct saa7146_pgtable *pt2 = &buf->pt[1];
struct saa7146_pgtable *pt3 = &buf->pt[2];
- u32 *ptr1, *ptr2, *ptr3;
- u32 fill;
+ __le32 *ptr1, *ptr2, *ptr3;
+ __le32 fill;
int size = buf->fmt->width*buf->fmt->height;
int i,p,m1,m2,m3,o1,o2;
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index 88b2b5a..2f68f4c 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -53,7 +53,7 @@ struct saa7146_vv;
/* saa7146 page table */
struct saa7146_pgtable {
unsigned int size;
- u32 *cpu;
+ __le32 *cpu;
dma_addr_t dma;
/* used for offsets for u,v planes for planar capture modes */
unsigned long offset;
@@ -101,7 +101,7 @@ struct saa7146_extension
struct saa7146_dma
{
dma_addr_t dma_handle;
- u32 *cpu_addr;
+ __le32 *cpu_addr;
};
struct saa7146_dev
--
1.5.3.GIT
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/