[PATCH] WRITE_RPS1() converts to le32 itself
From: Al Viro
Date: Sun Jun 22 2008 - 10:19:57 EST
... but two ancient drivers had not noticed.
Signed-off-by: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
---
drivers/media/dvb/ttpci/av7110.c | 40 ++++++++++++++--------------
drivers/media/dvb/ttpci/budget-patch.c | 44 ++++++++++++++++----------------
2 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index f05d43d..9f96293 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2403,18 +2403,18 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
saa7146_write(dev, MC1, MASK_29);
/* RPS1 timeout disable */
saa7146_write(dev, RPS_TOV1, 0);
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+ WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
+ WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+ WRITE_RPS1(GPIO3_MSK);
+ WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
#if RPS_IRQ
/* issue RPS1 interrupt to increment counter */
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ WRITE_RPS1(CMD_INTERRUPT);
#endif
- WRITE_RPS1(cpu_to_le32(CMD_STOP));
+ WRITE_RPS1(CMD_STOP);
/* Jump to begin of RPS program as safety measure (p37) */
- WRITE_RPS1(cpu_to_le32(CMD_JUMP));
- WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+ WRITE_RPS1(CMD_JUMP);
+ WRITE_RPS1(dev->d_rps1.dma_handle);
#if RPS_IRQ
/* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
@@ -2527,28 +2527,28 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
count = 0;
/* Wait Source Line Counter Threshold (p36) */
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+ WRITE_RPS1(CMD_PAUSE | EVT_HS);
/* Set GPIO3=1 (p42) */
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+ WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+ WRITE_RPS1(GPIO3_MSK);
+ WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
#if RPS_IRQ
/* issue RPS1 interrupt */
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ WRITE_RPS1(CMD_INTERRUPT);
#endif
/* Wait reset Source Line Counter Threshold (p36) */
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+ WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
/* Set GPIO3=0 (p42) */
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+ WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+ WRITE_RPS1(GPIO3_MSK);
+ WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
#if RPS_IRQ
/* issue RPS1 interrupt */
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ WRITE_RPS1(CMD_INTERRUPT);
#endif
/* Jump to begin of RPS program (p37) */
- WRITE_RPS1(cpu_to_le32(CMD_JUMP));
- WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+ WRITE_RPS1(CMD_JUMP);
+ WRITE_RPS1(dev->d_rps1.dma_handle);
/* Fix VSYNC level */
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 9a15539..39bd0a2 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -431,22 +431,22 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
// in budget patch GPIO3 is connected to VSYNC_B
count = 0;
#if 0
- WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
- MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
+ WRITE_RPS1(CMD_UPLOAD |
+ MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 );
#endif
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+ WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
+ WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+ WRITE_RPS1(GPIO3_MSK);
+ WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
#if RPS_IRQ
// issue RPS1 interrupt to increment counter
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ WRITE_RPS1(CMD_INTERRUPT);
// at least a NOP is neede between two interrupts
- WRITE_RPS1(cpu_to_le32(CMD_NOP));
+ WRITE_RPS1(CMD_NOP);
// interrupt again
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ WRITE_RPS1(CMD_INTERRUPT);
#endif
- WRITE_RPS1(cpu_to_le32(CMD_STOP));
+ WRITE_RPS1(CMD_STOP);
#if RPS_IRQ
// set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
@@ -558,28 +558,28 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
// Wait Source Line Counter Threshold (p36)
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+ WRITE_RPS1(CMD_PAUSE | EVT_HS);
// Set GPIO3=1 (p42)
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+ WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+ WRITE_RPS1(GPIO3_MSK);
+ WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
#if RPS_IRQ
// issue RPS1 interrupt
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ WRITE_RPS1(CMD_INTERRUPT);
#endif
// Wait reset Source Line Counter Threshold (p36)
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+ WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
// Set GPIO3=0 (p42)
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+ WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+ WRITE_RPS1(GPIO3_MSK);
+ WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
#if RPS_IRQ
// issue RPS1 interrupt
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ WRITE_RPS1(CMD_INTERRUPT);
#endif
// Jump to begin of RPS program (p37)
- WRITE_RPS1(cpu_to_le32(CMD_JUMP));
- WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+ WRITE_RPS1(CMD_JUMP);
+ WRITE_RPS1(dev->d_rps1.dma_handle);
// Fix VSYNC level
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
--
1.5.3.GIT
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/