Re: [PATCH 1/4] ide-pmac: media-bay support fixes

[Benjamin Herrenschmidt]

> Don't panic. It looks like it's something else in linux-next that's
> changing some ifdef's in the media-bay code which is causing that.
> 
> I managed to pull linux next at the merge point with your tree and
> things apply. I'll use that to test.

Ok, it doesn't work properly. It gets error trying to register
the IDE device. Booting with a CD drive in and no disk in the drive
gives the log below.

I've verified that it works without your patches. If I apply only patch
1, it doesn't build due to some wrong construct in the probe code. I've
hand fixed it, but then I hit a BUG_ON in ide_probe_port() (line 773).

mediabay boot time messages (before IDE probing) are:

mediabay0: Registered Heathrow media-bay
mediabay0: powering down
mediabay0: switching to 3
mediabay0: powering up
mediabay0: enabling (kind:3)
mediabay0: waiting reset (kind:3)
mediabay0: waiting IDE reset (kind:3)
mediabay0: waiting IDE ready (kind:3)
mediabay0: up before IDE init
mediabay1: Registered Heathrow media-bay
mediabay1: powering down
mediabay1: switching to 0
mediabay1: powering up
mediabay1: enabling (kind:0)
mediabay1: waiting reset (kind:0)
mediabay1: bay is up (kind:0)

Later, IDE registers:

(ide0 is another controller, only ide1 and ide2 are media bay based, and
ide2 has no device on it at all).

ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 1 (mediabay), irq  35
ide1 at 0xc7020000-0xc7020070,0xc7020160 on irq 35
ide-pmac: Found Apple Heathrow ATA controller (macio), bus ID 4 (mediabay), irq  67
ide2 at 0xc7022000-0xc7022070,0xc7022160 on irq 67
mediabay0: waiting IDE ready (kind:3)
mediabay 0, registering IDE...
IDE register error
mediabay0: powering down

 .../...

mediabay0: end of power down
mediabay0: switching to 3
mediabay0: powering up
mediabay0: enabling (kind:3)
mediabay0: waiting reset (kind:3)
mediabay0: waiting IDE reset (kind:3)

 .../...

mediabay0: waiting IDE ready (kind:3)
mediabay 0, registering IDE...
IDE register error
mediabay0: powering down
mediabay0: end of power down
mediabay0: switching to 3
mediabay0: powering up
mediabay0: enabling (kind:3)
mediabay0: waiting reset (kind:3)
mediabay0: waiting IDE reset (kind:3)
mediabay0: waiting IDE ready (kind:3)
mediabay 0, registering IDE...
IDE register error
mediabay0: powering down
mediabay0: end of power down
mediabay0: switching to 3
mediabay0: powering up
mediabay0: enabling (kind:3)
mediabay0: waiting reset (kind:3)
mediabay0: waiting IDE reset (kind:3)
mediabay0: waiting IDE ready (kind:3)
mediabay 0, registering IDE...
IDE register error
mediabay0: powering down
media-bay 0, IDE device badly inserted or unrecognised
mediabay0: end of power down

Cheers,
Ben.



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/