Re: Scatter-gather list constraints

[Alan Stern]

On Mon, 23 Jun 2008, David Vrabel wrote:

> Alan Stern wrote:
> > On Mon, 23 Jun 2008, David Vrabel wrote:
> > 
> >> Note that this 1024 byte multiple is for one particular WUSB mass
> >> storage device.  The WUSB standard permits max packet sizes of up 3584
> >> (in multiples of 512), but I suspect WUSB mass storage devices will only
> >> use 512, 1024, or 2048.
> >>
> >> For a solution, we may be able to do something if the HWA host
> >> controller is passed a single URB with an s-g list (rather than one URB
> >> per s-g list entry) and was careful about how it segmented the URB into
> >> transfers to the rpipe.
> > 
> > That would be ideal.  However there is no way to pass an S-G list along 
> > with an URB; there's no field for it in the data structure.  And none 
> > of the existing host controller drivers support such a thing.
> > 
> > I suppose we could add a field to struct urb and add a flag indicating 
> > whether the controller driver supports S-G lists.
> 
> This is what I was thinking.
> 
> Can the number of entries in a sg list be limited?  e.g., if the
> hardware only had support for say, 64 entries?

Yes, there are two fields in struct request_queue for this: 
max_phys_segments (the driver's limit) and max_hw_segments (the 
hardware's limit).

Standard EHCI hardware requires that the memory locations of the data
for each packet be "virtually contiguous", i.e., discontiguities are
allowed only at 4-KB page boundaries.  This severely limits the ability
to handle general S-G lists.  For example, a 1024-byte packet can't be
broken up into two 512-byte pieces unless the first piece ends at a
page boundary and the second piece begins at a page boundary.  Maybe
HWA host controllers are required to be more flexible, I don't know.

This may mean that your suggested approach won't work.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/