Re: 2.6.27-rc7-git1: usb-storage breakage with non-functional disk

[Indan Zupancic]

On Tue, July 8, 2008 16:11, Alan Stern wrote:
> On Tue, 8 Jul 2008, Indan Zupancic wrote:
>
>> On Tue, July 8, 2008 15:00, Indan Zupancic wrote:
>> > Any idea why my cardreader doesn't work in the first place though?
>>
>> In case it's useful, an usbmon dump can be found at
>> http://pastebin.org/49630
>> This is the log of plugging in the thing and unplugging it again after it
>> failed.
>> Corresponding dmesg output with USB and usb-storage debugging enabled at
>> http://pastebin.org/49631. This is on 2.6.26-rc9 with Alan's patch applied.
>
> The logs reveal only that this doesn't seem to be a software- or
> firmware-related problem.  And it probably isn't a problem in the cable
> either, which leaves only the reader or its USB interface.

It's connected directly without cable, so good call on the no cable problem.
It looks like a big usb stick with slots for memory cards.

It's not something silly like the device saying it only needs 100mA
while in reality it needs 200mA? Or are those numbers only used to
calculate how many devices may be connected?

> It might work better at full speed than at high speed (although you
> probably don't want to use it in a degraded mode).

I have ehci built-in, how can I force full speed? Hm, in the BIOS maybe.

I'll try it with my neighbours' pc later today, if I've the chance.

Thanks,

Indan


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/