Re: Drivers for selfmade hardware

[Andrew Morton]

On Sun, 29 Jun 2008 21:47:52 +0200 Michael Buesch <mb@xxxxxxxxx> wrote:

> I'm wondering what the policy is for selfmade hardware
> or other hardware where only a few pieces exist. Is it desired
> to get drivers for this kind of hardware merged upstream into the
> mainline kernel?
> 
> I have a tiny driver that can be used to drive a modified
> Brooktree 8xx based card in 24-port GPIO mode.
> So the card can be used as a cheap digital PCI GPIO card.
> This hardware can be built with some soldering skills, a tiny
> soldering tip and a few hours of free time.
> 
> So what's the policy? Push to mainline or keep as seperate
> patch?
> 
> (The following patch is not complete, but just what I have for now
> to show you...)
> 
> ...
>
> +#ifdef CONFIG_PM
> +static int btgpio_suspend(struct pci_dev *pdev, pm_message_t state)
> +{
> +	struct btgpio *bg = pci_get_drvdata(pdev);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&bg->lock, flags);
> +
> +	bg->saved_outen = bgread(BT848_GPIO_OUT_EN);
> +	bg->saved_data = bgread(BT848_GPIO_DATA);
> +
> +	bgwrite(0, BT848_INT_MASK);
> +	bgwrite(~0x0, BT848_INT_STAT);
> +	bgwrite(0x0, BT848_GPIO_OUT_EN);
> +
> +	spin_unlock_irqrestore(&bg->lock, flags);
> +
> +	pci_save_state(pdev);
> +	pci_disable_device(pdev);
> +	pci_set_power_state(pdev, pci_choose_state(pdev, state));
> +
> +	return 0;
> +}
> +
> +static int btgpio_resume(struct pci_dev *pdev)
> +{
> +	struct btgpio *bg = pci_get_drvdata(pdev);
> +	unsigned long flags;
> +	int err;
> +
> +	pci_set_power_state(pdev, 0);
> +	err = pci_enable_device(pdev);
> +	if (err)
> +		return err;
> +	pci_restore_state(pdev);
> +
> +	spin_lock_irqsave(&bg->lock, flags);
> +
> +	bgwrite(0, BT848_INT_MASK);
> +	bgwrite(0, BT848_GPIO_REG_INP);
> +	bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);
> +	bgwrite(bg->saved_data, BT848_GPIO_DATA);
> +
> +	spin_unlock_irqrestore(&bg->lock, flags);
> +
> +	return 0;
> +}

#else
#define btgpio_suspend NULL
#define btgpio_resume NULL

> +#endif /* CONFIG_PM */
> +
> +static struct pci_device_id btgpio_pci_tbl[] = {
> +	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },
> +	{ 0, },
> +};
> +MODULE_DEVICE_TABLE(pci, btgpio_pci_tbl);
> +
> +static struct pci_driver btgpio_pci_driver = {
> +	.name		= "btgpio",
> +	.id_table	= btgpio_pci_tbl,
> +	.probe		= btgpio_probe,
> +	.remove		= btgpio_remove,
> +#ifdef CONFIG_PM

dd

> +	.suspend	= btgpio_suspend,
> +	.resume		= btgpio_resume,
> +#endif

dd

> +};
> +

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/