Re: sdhci: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter -disabling IRQ
From: David Härdeman
Date: Fri Jul 11 2008 - 12:47:38 EST
On Thu, Jul 10, 2008 at 08:34:57AM +0200, Pierre Ossman wrote:
On Tue, 24 Jun 2008 20:16:56 +0200 David Härdeman <david@xxxxxxxxxxx> wrote:
I'm using my brand new HP 8510w laptop with kernel 2.6.25 (Debian kernel
2.6.25-2-amd64 version 2.6.25-5 to be exact) and the integrated memory
card reader is detected by the sdhci kernel module.
However, about 10 minutes after boot I get the following message in
dmesg (pid and process may change of course):
[ 697.844419] irq 19: nobody cared (try booting with the "irqpoll" option)
Do you have a card in at this point?
No, no card present during the entire time from boot until the above
message.
And can you give me a complete
dmesg dump. The sdhci hardware might not be the culprit, but just a
trigger in that it enables that interrupt line.
Attached below....and /proc/interrupts says:
CPU0 CPU1
0: 250547 290540 IO-APIC-edge timer
1: 4700 4438 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc
9: 2960 2887 IO-APIC-fasteoi acpi
12: 371395 342127 IO-APIC-edge i8042
14: 92 78 IO-APIC-edge ide0
16: 176056 155841 IO-APIC-fasteoi uhci_hcd:usb3, yenta
17: 59 54 IO-APIC-fasteoi uhci_hcd:usb4, yenta, HDA Intel
18: 28 27 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7, firewire_ohci
19: 40955 59046 IO-APIC-fasteoi sdhc0:slot0
20: 448 457 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5
22: 0 0 IO-APIC-fasteoi uhci_hcd:usb6
1273: 1068 598 PCI-MSI-edge eth0
1274: 41396 39036 PCI-MSI-edge iwl4965
1275: 18013 12556 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 256042 253255 Local timer interrupts
RES: 80030 85162 Rescheduling interrupts
CAL: 222 300 function call interrupts
TLB: 1925 1993 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
SPU: 0 0 Spurious interrupts
ERR: 0
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-5) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Fri Jun 20 19:16:03 CEST 2008
[ 0.000000] Command line: root=/dev/mapper/mainvg-mainlv ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved)
[ 0.000000] BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786352) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1294336
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F7AF0, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT BFFC81CC, 0084 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: FACP BFFC8084, 00F4 (r4 HP 30C5 3 HP 1)
[ 0.000000] ACPI: DSDT BFFC8544, 12E41 (r1 HP 8510x 10000 MSFT 3000001)
[ 0.000000] ACPI: FACS BFFE7D80, 0040
[ 0.000000] ACPI: SLIC BFFC8250, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: HPET BFFC83C8, 0038 (r1 HP 30C5 1 HP 1)
[ 0.000000] ACPI: APIC BFFC8400, 0068 (r1 HP 30C5 1 HP 1)
[ 0.000000] ACPI: MCFG BFFC8468, 003C (r1 HP 30C5 1 HP 1)
[ 0.000000] ACPI: TCPA BFFC84A4, 0032 (r2 HP 30C5 1 HP 1)
[ 0.000000] ACPI: ASF! BFFC84D8, 0069 (r16 HP CHIMAYU 1 HP 0)
[ 0.000000] ACPI: SSDT BFFDB385, 0328 (r1 HP HPQSAT 1 MSFT 3000001)
[ 0.000000] ACPI: SSDT BFFDB6AD, 017C (r1 HP HPQMRM 1 MSFT 3000001)
[ 0.000000] ACPI: SSDT BFFDC231, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
[ 0.000000] ACPI: SSDT BFFDC490, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317)
[ 0.000000] ACPI: SSDT BFFDC536, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013c000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786352) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000013c000000
[ 0.000000] NODE_DATA [000000000000e000 - 0000000000014fff]
[ 0.000000] bootmap [0000000000015000 - 000000000003c7ff] pages 28
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-64f2f7] TEXT DATA BSS
[ 0.000000] early res: 3 [3781b000-37fefd7e] RAMDISK
[ 0.000000] early res: 4 [9fc00-a0bff] EBDA
[ 0.000000] early res: 5 [8000-dfff] PGTABLE
[ 0.000000] No mptable found.
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006600000 on node 0
[ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810006a00000 on node 0
[ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810006e00000 on node 0
[ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007200000 on node 0
[ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007600000 on node 0
[ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810007a00000 on node 0
[ 0.000000] [ffffe20004400000-ffffe200045fffff] PMD ->ffff810007e00000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1294336
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 786352
[ 0.000000] 0: 1048576 -> 1294336
[ 0.000000] On node 0 totalpages: 1032015
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1113 pages reserved
[ 0.000000] DMA zone: 2830 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767976 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc5000
[ 0.000000] PM: Registered nosave memory: 00000000bffc5000 - 00000000bffc6000
[ 0.000000] PM: Registered nosave memory: 00000000bffc6000 - 00000000bffe7000
[ 0.000000] PM: Registered nosave memory: 00000000bffe7000 - 00000000bffe8000
[ 0.000000] PM: Registered nosave memory: 00000000bffe8000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000
[ 0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000
[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000
[ 0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013206
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/mainvg-mainlv ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000001] time.c: Detected 2393.988 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x8021000 - 0xc021000
[ 0.004000] Memory: 3991888k/5177344k available (2184k kernel code, 136172k reserved, 1088k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.080007] Calibrating delay using timer specific routine.. 4792.82 BogoMIPS (lpj=9585655)
[ 0.080197] Security Framework initialized
[ 0.080277] SELinux: Disabled at boot.
[ 0.080355] Capability LSM initialized
[ 0.080741] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.083353] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084753] Mount-cache hash table entries: 256
[ 0.084971] Initializing cgroup subsys ns
[ 0.085051] Initializing cgroup subsys cpuacct
[ 0.085145] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.085283] CPU: L2 cache: 4096K
[ 0.085359] CPU 0/0 -> Node 0
[ 0.085434] CPU: Physical Processor ID: 0
[ 0.085510] CPU: Processor Core ID: 0
[ 0.085594] CPU0: Thermal monitoring handled by SMI
[ 0.085595] using mwait in idle threads.
[ 0.086369] ACPI: Core revision 20070126
[ 0.093327] ACPI: Override [DSDT- 8510x], this is unsafe: tainting kernel
[ 0.093410] ACPI: Table DSDT replaced by host OS
[ 0.093608] ACPI: DSDT 00000000, 12E41 (r1 HP 8510x 10000 MSFT 3000001)
[ 0.093822] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>Using local APIC timer interrupts.
[ 0.144010] APIC timer calibration result 12468669
[ 0.144011] Detected 12.468 MHz APIC timer.
[ 0.144224] Booting processor 1/2 APIC 0x1
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4787.97 BogoMIPS (lpj=9575950)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b
[ 0.232584] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.236047] Brought up 2 CPUs
[ 0.236204] CPU0 attaching sched-domain:
[ 0.236206] domain 0: span 00000003
[ 0.236207] groups: 00000001 00000002
[ 0.236210] domain 1: span 00000003
[ 0.236211] groups: 00000003
[ 0.236213] CPU1 attaching sched-domain:
[ 0.236214] domain 0: span 00000003
[ 0.236216] groups: 00000002 00000001
[ 0.236218] domain 1: span 00000003
[ 0.236219] groups: 00000003
[ 0.236458] net_namespace: 1016 bytes
[ 0.236538] Booting paravirtualized kernel on bare hardware
[ 0.236780] NET: Registered protocol family 16
[ 0.237019] ACPI: bus type pci registered
[ 0.237169] PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
[ 0.237249] PCI: Not using MMCONFIG.
[ 0.237325] PCI: Using configuration type 1
[ 0.240289] ACPI: EC: Look up EC in DSDT
[ 0.005184] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.302028] ACPI: Interpreter enabled
[ 0.302106] ACPI: (supports S0 S3 S4 S5)
[ 0.302441] ACPI: Using IOAPIC for interrupt routing
[ 0.314099] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.314181] ACPI: EC: driver started in interrupt mode
[ 0.314312] ACPI: PCI Root Bridge [C003] (0000:00)
[ 0.315653] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.315747] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[ 0.316869] PCI: Transparent bridge - 0000:00:1e.0
[ 0.317033] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.317483] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT]
[ 0.317600] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
[ 0.317773] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
[ 0.317913] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
[ 0.318055] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
[ 0.366117] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
[ 0.366647] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
[ 0.367174] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
[ 0.367701] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5
[ 0.368237] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
[ 0.368763] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5
[ 0.372237] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11)
[ 0.372658] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
[ 0.373179] ACPI: Power Resource [C238] (on)
[ 0.373302] ACPI: Power Resource [C254] (on)
[ 0.373433] ACPI: Power Resource [C17C] (off)
[ 0.376141] ACPI: Power Resource [C362] (off)
[ 0.376316] ACPI: Power Resource [C365] (off)
[ 0.376489] ACPI: Power Resource [C366] (off)
[ 0.376662] ACPI: Power Resource [C367] (off)
[ 0.376834] ACPI: Power Resource [C368] (off)
[ 0.376954] ACPI: Power Resource [C369] (off)
[ 0.377129] ACPI: Power Resource [C382] (off)
[ 0.377303] ACPI: Power Resource [C383] (off)
[ 0.377476] ACPI: Power Resource [C384] (off)
[ 0.377649] ACPI: Power Resource [C385] (off)
[ 0.377823] ACPI: Power Resource [C386] (off)
[ 0.378080] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.378181] pnp: PnP ACPI init
[ 0.378261] ACPI: bus type pnp registered
[ 0.378467] 00:00: calling quirk 0xffffffff8035b9ee: quirk_system_pci_resources+0x0/0x173()
[ 0.378507] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.381619] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.382791] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.382988] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.383030] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.383069] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.383107] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.383150] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.383334] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.383377] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.383420] pnp 00:0a: Plug and Play ACPI device, IDs SYN0136 SYN0100 SYN0002 PNP0f13 (active)
[ 0.383729] 00:0b: calling quirk 0xffffffff8035b9ee: quirk_system_pci_resources+0x0/0x173()
[ 0.383770] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.385875] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.385930] 00:0d: calling quirk 0xffffffff8035b9ee: quirk_system_pci_resources+0x0/0x173()
[ 0.385979] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.387331] 00:0e: calling quirk 0xffffffff8035b9ee: quirk_system_pci_resources+0x0/0x173()
[ 0.387386] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.387406] pnp: PnP ACPI: found 15 devices
[ 0.387484] ACPI: ACPI bus type pnp unregistered
[ 0.387699] usbcore: registered new interface driver usbfs
[ 0.387818] usbcore: registered new interface driver hub
[ 0.387926] usbcore: registered new device driver usb
[ 0.388112] PCI: Using ACPI for IRQ routing
[ 0.388190] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.404048] PCI-GART: No AMD northbridge found.
[ 0.404130] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.404457] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.405568] ACPI: RTC can wake from S4
[ 0.420043] pnp: the driver 'system' has been registered
[ 0.420051] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.420131] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.420213] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.420304] system 00:00: driver attached
[ 0.420311] system 00:0b: ioport range 0x500-0x55f has been reserved
[ 0.420392] system 00:0b: ioport range 0x800-0x80f has been reserved
[ 0.420473] system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.420565] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.420656] system 00:0b: driver attached
[ 0.420660] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 0.420741] system 00:0d: ioport range 0x1000-0x107f has been reserved
[ 0.420822] system 00:0d: ioport range 0x1100-0x113f has been reserved
[ 0.420903] system 00:0d: ioport range 0x1200-0x121f has been reserved
[ 0.420984] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.421066] system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.421158] system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.421249] system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.421340] system 00:0d: iomem range 0xfed90000-0xfed99fff could not be reserved
[ 0.421432] system 00:0d: driver attached
[ 0.421436] system 00:0e: iomem range 0xcd200-0xcffff has been reserved
[ 0.421516] system 00:0e: iomem range 0xd2000-0xd3fff has been reserved
[ 0.421598] system 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved
[ 0.421689] system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.421781] system 00:0e: driver attached
[ 0.422104] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
[ 0.422195] PCI: Bridge: 0000:00:01.0
[ 0.422272] IO window: 4000-4fff
[ 0.422351] MEM window: 0xe5000000-0xe7ffffff
[ 0.422430] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.422512] PCI: Bridge: 0000:00:1c.0
[ 0.422589] IO window: disabled.
[ 0.422669] MEM window: disabled.
[ 0.422747] PREFETCH window: disabled.
[ 0.422828] PCI: Bridge: 0000:00:1c.1
[ 0.422905] IO window: disabled.
[ 0.422985] MEM window: 0xe4000000-0xe40fffff
[ 0.423065] PREFETCH window: disabled.
[ 0.423147] PCI: Bridge: 0000:00:1c.4
[ 0.423225] IO window: 2000-3fff
[ 0.423306] MEM window: 0xe0000000-0xe3ffffff
[ 0.423386] PREFETCH window: disabled.
[ 0.423470] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 0.423548] IO window: 0x00006000-0x000060ff
[ 0.423629] IO window: 0x00006400-0x000064ff
[ 0.423710] PREFETCH window: 0xc4000000-0xc7ffffff
[ 0.423792] MEM window: 0xcc000000-0xcfffffff
[ 0.423873] PCI: Bus 4, cardbus bridge: 0000:02:06.1
[ 0.423951] IO window: 0x00006800-0x000068ff
[ 0.424040] IO window: 0x00006c00-0x00006cff
[ 0.424121] PREFETCH window: 0xc8000000-0xcbffffff
[ 0.424202] MEM window: 0xec000000-0xefffffff
[ 0.424284] PCI: Bridge: 0000:00:1e.0
[ 0.424362] IO window: 6000-6fff
[ 0.424443] MEM window: 0xe4100000-0xe43fffff
[ 0.424523] PREFETCH window: 0x00000000c4000000-0x00000000cbffffff
[ 0.424618] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.424774] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.424795] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.424951] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.424973] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.425129] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.425151] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.425308] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.425321] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.425338] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.425509] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.425685] NET: Registered protocol family 2
[ 0.464163] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.465303] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.469987] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.470745] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.470827] TCP reno registered
[ 0.480216] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.504046] Switched to high resolution mode on CPU 0
[ 0.747848] it is
[ 1.032652] Freeing initrd memory: 8019k freed
[ 0.800179] audit: initializing netlink socket (disabled)
[ 0.800276] type=2000 audit(1215791369.036:1): initialized
[ 0.800664] Total HugeTLB memory allocated, 0
[ 0.800824] VFS: Disk quotas dquot_6.5.1
[ 0.800921] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.801072] io scheduler noop registered
[ 0.801150] io scheduler anticipatory registered
[ 0.801227] io scheduler deadline registered
[ 0.801314] io scheduler cfq registered (default)
[ 0.801534] pci 0000:01:00.0: Boot video device
[ 0.801627] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.801652] assign_interrupt_mode Found MSI capability
[ 0.801755] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.801828] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.801869] assign_interrupt_mode Found MSI capability
[ 0.801988] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.802083] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.802125] assign_interrupt_mode Found MSI capability
[ 0.802245] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.802273] Allocate Port Service[0000:00:1c.1:pcie02]
[ 0.802366] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.802408] assign_interrupt_mode Found MSI capability
[ 0.802528] Allocate Port Service[0000:00:1c.4:pcie00]
[ 0.802556] Allocate Port Service[0000:00:1c.4:pcie02]
[ 0.804687] Real Time Clock Driver v1.12ac
[ 0.804976] hpet_resources: 0xfed00000 is busy
[ 0.805055] Linux agpgart interface v0.103
[ 0.805134] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.805454] pnp: the driver 'serial' has been registered
[ 0.805607] ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.805840] 0000:00:03.3: ttyS0 at I/O 0x5030 (irq = 17) is a 16550A
[ 0.806524] brd: module loaded
[ 0.806652] input: Macintosh mouse button emulation as /class/input/input0
[ 0.806803] pnp: the driver 'i8042 kbd' has been registered
[ 0.806816] i8042 kbd 00:09: driver attached
[ 0.806840] pnp: the driver 'i8042 aux' has been registered
[ 0.806855] i8042 aux 00:0a: driver attached
[ 0.806877] PNP: PS/2 Controller [PNP0303:C251,PNP0f13:C252] at 0x60,0x64 irq 1,12
[ 0.808800] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.809636] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.809717] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.809796] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.809875] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.809954] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.828142] mice: PS/2 mouse device common for all mice
[ 0.828250] cpuidle: using governor ladder
[ 0.828328] cpuidle: using governor menu
[ 0.828686] TCP cubic registered
[ 0.828769] NET: Registered protocol family 1
[ 0.828853] NET: Registered protocol family 17
[ 0.829027] registered taskstats version 1
[ 0.829211] Freeing unused kernel memory: 372k freed
[ 0.849990] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.140410] ACPI: Transitioning device [C36A] to D3
[ 1.140524] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 1.140606] ACPI: Fan [C36A] (off)
[ 1.140870] ACPI: Transitioning device [C36B] to D3
[ 1.140973] ACPI: PNP0C0B:01 is registered as cooling_device1
[ 1.141054] ACPI: Fan [C36B] (off)
[ 1.141318] ACPI: Transitioning device [C36C] to D3
[ 1.141421] ACPI: PNP0C0B:02 is registered as cooling_device2
[ 1.141502] ACPI: Fan [C36C] (off)
[ 1.141764] ACPI: Transitioning device [C36D] to D3
[ 1.141866] ACPI: PNP0C0B:03 is registered as cooling_device3
[ 1.141948] ACPI: Fan [C36D] (off)
[ 1.142209] ACPI: Transitioning device [C36E] to D3
[ 1.142312] ACPI: PNP0C0B:04 is registered as cooling_device4
[ 1.142394] ACPI: Fan [C36E] (off)
[ 1.142551] ACPI: Transitioning device [C36F] to D3
[ 1.142653] ACPI: PNP0C0B:05 is registered as cooling_device5
[ 1.142735] ACPI: Fan [C36F] (off)
[ 1.142999] ACPI: Transitioning device [C387] to D3
[ 1.143101] ACPI: PNP0C0B:06 is registered as cooling_device6
[ 1.144098] ACPI: Fan [C387] (off)
[ 1.144360] ACPI: Transitioning device [C388] to D3
[ 1.144463] ACPI: PNP0C0B:07 is registered as cooling_device7
[ 1.144544] ACPI: Fan [C388] (off)
[ 1.144806] ACPI: Transitioning device [C389] to D3
[ 1.144908] ACPI: PNP0C0B:08 is registered as cooling_device8
[ 1.144991] ACPI: Fan [C389] (off)
[ 1.145253] ACPI: Transitioning device [C38A] to D3
[ 1.145355] ACPI: PNP0C0B:09 is registered as cooling_device9
[ 1.145437] ACPI: Fan [C38A] (off)
[ 1.145699] ACPI: Transitioning device [C38B] to D3
[ 1.145801] ACPI: PNP0C0B:0a is registered as cooling_device10
[ 1.145883] ACPI: Fan [C38B] (off)
[ 0.917373] ACPI: SSDT BFFDB8F1, 02C1 (r1 HP Cpu0Ist 3000 INTL 20060317)
[ 0.917954] ACPI: SSDT BFFDBC37, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317)
[ 1.161160] Monitor-Mwait will be used to enter C-1 state
[ 1.161163] Monitor-Mwait will be used to enter C-2 state
[ 1.161257] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.161548] ACPI: ACPI0007:00 is registered as cooling_device11
[ 1.161628] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.162118] ACPI: SSDT BFFDB829, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317)
[ 1.162571] ACPI: SSDT BFFDBBB2, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317)
[ 0.930878] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.164085] Marking TSC unstable due to TSC halts in idle
[ 0.931291] ACPI: ACPI0007:01 is registered as cooling_device12
[ 0.931378] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.936455] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.180893] ACPI: Thermal Zone [TZ2] (54 C)
[ 1.183746] ACPI: LNXTHERM:02 is registered as thermal_zone1
[ 1.184560] ACPI: Thermal Zone [TZ3] (46 C)
[ 1.193676] ACPI: LNXTHERM:03 is registered as thermal_zone2
[ 0.968264] ACPI: Thermal Zone [TZ4] (27 C)
[ 0.972272] ACPI: LNXTHERM:04 is registered as thermal_zone3
[ 0.976191] ACPI: Thermal Zone [TZ5] (30 C)
[ 1.226944] ACPI: LNXTHERM:05 is registered as thermal_zone4
[ 1.246699] ACPI: Thermal Zone [TZ0] (65 C)
[ 1.246755] ACPI: LNXTHERM:06 is registered as thermal_zone5
[ 1.246755] ACPI: Thermal Zone [TZ1] (61 C)
[ 1.264636] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
[ 1.264724] e1000e: Copyright (c) 1999-2007 Intel Corporation.
[ 1.264858] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 1.265024] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 1.494756] USB Universal Host Controller Interface driver v3.0
[ 1.266346] No dock devices found.
[ 1.271163] SCSI subsystem initialized
[ 1.285533] libata version 3.00 loaded.
[ 1.350548] sdhci: Secure Digital Host Controller Interface driver
[ 1.350555] sdhci: Copyright(c) Pierre Ossman
[ 1.596004] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 1.596092] ricoh-mmc: Copyright(c) Philip Langdale
[ 1.388896] eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:4b:80:af:5c
[ 1.388980] eth0: Intel(R) PRO/1000 Network Connection
[ 1.389086] eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
[ 1.389248] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.389413] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1.389417] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.389651] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.393658] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.393743] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 1.393754] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8041000
[ 1.410568] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.410758] usb usb1: configuration #1 chosen from 1 choice
[ 1.410856] hub 1-0:1.0: USB hub found
[ 1.410938] hub 1-0:1.0: 4 ports detected
[ 1.513508] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.513591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.513681] usb usb1: Product: EHCI Host Controller
[ 1.513760] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 1.513839] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.513955] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.514120] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1.514123] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.514233] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.521297] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.521379] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 1.521390] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8048000
[ 1.533452] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.533616] usb usb2: configuration #1 chosen from 1 choice
[ 1.533712] hub 2-0:1.0: USB hub found
[ 1.533791] hub 2-0:1.0: 6 ports detected
[ 1.636307] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.636394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.636484] usb usb2: Product: EHCI Host Controller
[ 1.636563] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 1.636643] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.862463] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.862463] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 1.862463] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.862463] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.862463] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005060
[ 1.862463] usb usb3: configuration #1 chosen from 1 choice
[ 1.862463] hub 3-0:1.0: USB hub found
[ 1.862463] hub 3-0:1.0: 2 ports detected
[ 1.962327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.962411] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.962501] usb usb3: Product: UHCI Host Controller
[ 1.962580] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.962658] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.962772] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 1.962941] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1.962944] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.963061] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.963182] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005080
[ 1.963357] usb usb4: configuration #1 chosen from 1 choice
[ 1.963451] hub 4-0:1.0: USB hub found
[ 1.963530] hub 4-0:1.0: 2 ports detected
[ 1.978272] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1.982256] Clocksource tsc unstable (delta = -295181074 ns)
[ 2.066106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.066193] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.066284] usb usb4: Product: UHCI Host Controller
[ 2.066362] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.066441] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.066547] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 2.066721] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.066724] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.066830] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.066943] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000050a0
[ 2.067110] usb usb5: configuration #1 chosen from 1 choice
[ 2.067209] hub 5-0:1.0: USB hub found
[ 2.067290] hub 5-0:1.0: 2 ports detected
[ 2.169296] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.169384] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.169475] usb usb5: Product: UHCI Host Controller
[ 2.169553] usb usb5: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.169632] usb usb5: SerialNumber: 0000:00:1d.0
[ 2.169736] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 2.169910] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.169913] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.170021] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.170136] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000050c0
[ 2.170302] usb usb6: configuration #1 chosen from 1 choice
[ 2.170401] hub 6-0:1.0: USB hub found
[ 2.170481] hub 6-0:1.0: 2 ports detected
[ 2.217176] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 2.273076] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.273163] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273254] usb usb6: Product: UHCI Host Controller
[ 2.273332] usb usb6: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.273412] usb usb6: SerialNumber: 0000:00:1d.1
[ 2.273514] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 2.273688] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.273691] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.273798] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.273910] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
[ 2.274075] usb usb7: configuration #1 chosen from 1 choice
[ 2.274174] hub 7-0:1.0: USB hub found
[ 2.274254] hub 7-0:1.0: 2 ports detected
[ 2.376862] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.376949] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.377040] usb usb7: Product: UHCI Host Controller
[ 2.377118] usb usb7: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.377197] usb usb7: SerialNumber: 0000:00:1d.2
[ 2.157441] ahci 0000:00:1f.2: version 3.0
[ 2.157441] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 21 (level, low) -> IRQ 21
[ 2.456828] usb 2-3: new high speed USB device using ehci_hcd and address 3
[ 2.368916] usb 2-3: configuration #1 chosen from 1 choice
[ 2.369152] usb 2-3: New USB device found, idVendor=4146, idProduct=ba01
[ 2.369233] usb 2-3: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 2.369314] usb 2-3: Product: USB Mass Storage Device
[ 2.369390] usb 2-3: SerialNumber: 00A00000000142
[ 2.601071] Initializing USB Mass Storage driver...
[ 2.607551] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 2.778052] usb 3-1: configuration #1 chosen from 1 choice
[ 2.779740] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
[ 2.783337] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.783419] usb 3-1: Product: HP Integrated Module
[ 2.783496] usb 3-1: Manufacturer: Broadcom Corp
[ 3.077922] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 3.157738] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 3.157835] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
[ 3.157930] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.158107] scsi0 : ahci
[ 3.158290] scsi1 : ahci
[ 3.158442] scsi2 : ahci
[ 3.158572] ata1: SATA max UDMA/133 abar m2048@0xe8049000 port 0xe8049100 irq 1275
[ 3.158664] ata2: DUMMY
[ 3.161713] ata3: DUMMY
[ 3.462821] usb 5-2: configuration #1 chosen from 1 choice
[ 3.465336] usb 5-2: New USB device found, idVendor=08ff, idProduct=2580
[ 3.465417] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.465499] usb 5-2: Product: Fingerprint Sensor
[ 3.593258] scsi3 : SCSI emulation for USB Mass Storage devices
[ 3.374086] usb-storage: device found at 3
[ 3.374086] usb-storage: waiting for device to settle before scanning
[ 3.593559] usbcore: registered new interface driver usb-storage
[ 3.593647] USB Mass Storage support registered.
[ 3.856517] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.638465] ata1.00: ATA-7: ST9200420ASG, 3.AAA, max UDMA/133
[ 3.638465] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.859757] ata1.00: configured for UDMA/133
[ 3.640195] scsi 0:0:0:0: Direct-Access ATA ST9200420ASG 3.AA PQ: 0 ANSI: 5
[ 3.642751] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.643039] Uniform Multi-Platform E-IDE driver
[ 3.643118] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.871414] Driver 'sd' needs updating - please use bus_type methods
[ 3.872542] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 3.872641] sd 0:0:0:0: [sda] Write Protect is off
[ 3.872719] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.872737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.872875] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 3.872965] sd 0:0:0:0: [sda] Write Protect is off
[ 3.873043] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.873061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.873154] sda: sda1 sda2
[ 3.887359] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.720245] firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI version 1.10
[ 3.720642] sdhci: SDHCI controller found at 0000:02:06.3 [1180:0822] (rev 20)
[ 3.720763] ACPI: PCI Interrupt 0000:02:06.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 3.720930] sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3.721059] mmc0: SDHCI at 0xe4103000 irq 19 DMA
[ 3.942461] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10)
[ 3.942567] ricoh-mmc: Controller is now disabled.
[ 3.943097] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
[ 3.943194] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.943354] ICH8M: not 100% native mode: will probe irqs later
[ 3.943441] ICH8M: IDE port disabled
[ 3.943520] ide0: BM-DMA at 0x5100-0x5107, BIOS settings: hda:DMA, hdb:PIO
[ 3.943680] Probing IDE interface ide0...
[ 4.439353] firewire_core: created device fw0: GUID 00023f99293d1810, S400
[ 4.675079] hda: MATSHITADVD-RAM UJ-861H, ATAPI CD/DVD-ROM drive
[ 5.010127] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.010432] hda: MWDMA2 mode selected
[ 5.010831] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.800209] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 4.800672] Uniform CD-ROM driver Revision: 3.20
[ 5.067896] device-mapper: uevent: version 1.0.3
[ 5.068258] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
[ 8.585331] usb-storage: device scan complete
[ 8.586298] scsi 3:0:0:0: Direct-Access I0MEGA UMni1GB*IOM2K4 1.01 PQ: 0 ANSI: 2
[ 8.586944] sd 3:0:0:0: [sdb] 2048000 512-byte hardware sectors (1049 MB)
[ 8.587548] sd 3:0:0:0: [sdb] Write Protect is off
[ 8.587548] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 8.587548] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 8.589064] sd 3:0:0:0: [sdb] 2048000 512-byte hardware sectors (1049 MB)
[ 8.589797] sd 3:0:0:0: [sdb] Write Protect is off
[ 8.589876] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 8.589877] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 8.589961] sdb: sdb1
[ 8.590864] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 9.165396] PM: Starting manual resume from disk
[ 9.422219] kjournald starting. Commit interval 5 seconds
[ 9.215032] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.627738] udevd version 124 started
[ 12.117547] input: Power Button (FF) as /class/input/input2
[ 12.181070] ACPI: Power Button (FF) [PWRF]
[ 12.181245] input: Sleep Button (CM) as /class/input/input3
[ 12.245069] ACPI: Sleep Button (CM) [C274]
[ 12.245201] input: Lid Switch as /class/input/input4
[ 12.277177] ACPI: Lid Switch [C26E]
[ 12.534039] ACPI: Battery Slot [C1F4] (battery present)
[ 12.534319] ACPI: Battery Slot [C1F3] (battery absent)
[ 12.535054] ACPI: AC Adapter [C1F2] (on-line)
[ 12.535206] ACPI: WMI: Mapper loaded
[ 12.449296] ACPI: device:03 is registered as cooling_device13
[ 12.450177] input: Video Bus as /class/input/input5
[ 12.509356] ACPI: Video Device [C14B] (multi-head: yes rom: no post: no)
[ 12.758228] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 12.758384] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
[ 12.758509] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.906091] Bluetooth: Core ver 2.11
[ 12.743655] NET: Registered protocol family 31
[ 12.743759] Bluetooth: HCI device and connection manager initialized
[ 12.743846] Bluetooth: HCI socket layer initialized
[ 12.900042] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c5]
[ 13.181488] input: PC Speaker as /class/input/input6
[ 13.024509] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[ 13.024591] Socket status: 30000006
[ 13.024669] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 13.024750] pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
[ 13.024830] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
[ 13.025157] Yenta: CardBus bridge found at 0000:02:06.1 [103c:30c5]
[ 13.265781] Bluetooth: HCI USB driver ver 2.9
[ 13.267856] usbcore: registered new interface driver hci_usb
[ 13.152530] Yenta: ISA IRQ mask 0x0000, PCI irq 17
[ 13.152612] Socket status: 30000810
[ 13.152690] Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #07
[ 13.152784] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 13.152865] pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
[ 13.152946] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
[ 13.220625] pnp: the driver 'tpm_inf_pnp' has been registered
[ 13.220639] tpm_inf_pnp 00:03: Found C239 with ID IFX0102
[ 13.220772] tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 13.221117] tpm_inf_pnp 00:03: driver attached
[ 13.573639] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks
[ 13.573740] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 13.573913] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 13.574094] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 13.574117] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 13.623043] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 13.430525] phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 13.529028] ACPI: PCI interrupt for device 0000:10:00.0 disabled
[ 13.791215] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 13.791390] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 13.981201] pccard: PCMCIA card inserted into slot 1
[ 13.801815] cs: memory probe 0xc4000000-0xcbffffff: excluding 0xc4000000-0xcbffffff
[ 13.802112] cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff
[ 13.807235] pcmcia: registering new device pcmcia1.0
[ 13.819246] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa44793/0x300000
[ 13.819348] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 14.056385] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 13.896260] pnp: the driver 'parport_pc' has been registered
[ 13.896274] parport_pc 00:02: reported by Plug and Play ACPI
[ 13.896433] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 14.180927] parport_pc 00:02: driver attached
[ 14.004125] Probing IDE interface ide1...
[ 14.665058] Probing IDE interface ide1...
[ 15.327306] Probing IDE interface ide1...
[ 15.987508] Probing IDE interface ide1...
[ 16.653878] Probing IDE interface ide1...
[ 17.323745] Probing IDE interface ide1...
[ 17.986282] Probing IDE interface ide1...
[ 18.538784] input: PS/2 Generic Mouse as /class/input/input8
[ 18.647155] Probing IDE interface ide1...
[ 19.320789] Probing IDE interface ide1...
[ 19.994254] Probing IDE interface ide1...
[ 20.666661] ide-cs: ide_register() at 0x6100 & 0x610e, irq 17 failed
[ 20.921659] Probing IDE interface ide1...
[ 21.590141] Probing IDE interface ide1...
[ 22.260238] Probing IDE interface ide1...
[ 22.930242] Probing IDE interface ide1...
[ 23.600538] Probing IDE interface ide1...
[ 24.268936] Probing IDE interface ide1...
[ 24.939216] Probing IDE interface ide1...
[ 25.608802] Probing IDE interface ide1...
[ 26.278791] Probing IDE interface ide1...
[ 26.947439] Probing IDE interface ide1...
[ 27.617566] ide-cs: ide_register() at 0x6100 & 0x610e, irq 17 failed
[ 29.011590] EXT3 FS on dm-2, internal journal
[ 29.688449] loop: module loaded
[ 30.711493] kjournald starting. Commit interval 5 seconds
[ 30.716598] EXT3 FS on sda1, internal journal
[ 30.716744] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.972323] Adding 4194296k swap on /dev/mapper/mainvg-swaplv. Priority:-1 extents:1 across:4194296k
[ 33.243517] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 33.243615] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006)
[ 38.780696] NET: Registered protocol family 10
[ 38.781203] lo: Disabled Privacy Extensions
[ 38.781671] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.782122] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.004386] lp0: using parport0 (interrupt-driven).
[ 40.264224] ppdev: user-space parallel port driver
[ 45.634857] Bluetooth: L2CAP ver 2.9
[ 45.634968] Bluetooth: L2CAP socket layer initialized
[ 45.524961] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 45.839788] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 45.839871] Bluetooth: BNEP filters: protocol multicast
[ 45.634542] Bridge firewalling registered
[ 45.635739] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 45.869858] Bluetooth: RFCOMM socket layer initialized
[ 45.869981] Bluetooth: RFCOMM TTY layer initialized
[ 45.870093] Bluetooth: RFCOMM ver 1.8
[ 50.125136] wlan0: Initial auth_alg=0
[ 50.125142] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX
[ 50.326066] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX
[ 50.526077] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX
[ 50.726090] wlan0: authentication with AP XX:XX:XX:XX:XX:XX timed out
[ 52.898902] wlan0: Initial auth_alg=0
[ 52.898906] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX
[ 52.904090] wlan0: Initial auth_alg=0
[ 52.904094] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX
[ 52.907002] wlan0: Initial auth_alg=0
[ 52.907005] wlan0: authenticate with AP XX:XX:XX:XX:XX:XX
[ 52.909904] wlan0: RX authentication from XX:XX:XX:XX:XX:XX (alg=0 transaction=2 status=0)
[ 52.909909] wlan0: authenticated
[ 52.909911] wlan0: associate with AP XX:XX:XX:XX:XX:XX
[ 52.912175] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=4)
[ 52.912179] wlan0: associated
[ 52.912181] wlan0: switched to short barker preamble (BSSID=XX:XX:XX:XX:XX:XX)
[ 52.912742] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 62.999277] wlan0: no IPv6 routers present
[ 74.388846] CPU0 attaching NULL sched-domain.
[ 74.388859] CPU1 attaching NULL sched-domain.
[ 74.408739] CPU0 attaching sched-domain:
[ 74.408751] domain 0: span 00000003
[ 74.408755] groups: 00000001 00000002
[ 74.408763] domain 1: span 00000003
[ 74.408767] groups: 00000003
[ 74.408773] CPU1 attaching sched-domain:
[ 74.408777] domain 0: span 00000003
[ 74.408781] groups: 00000002 00000001
[ 74.408787] domain 1: span 00000003
[ 74.408791] groups: 00000003
[ 637.730290] irq 19: nobody cared (try booting with the "irqpoll" option)
[ 637.730290] Pid: 0, comm: swapper Tainted: G A 2.6.25-2-amd64 #1
[ 637.730290]
[ 637.730290] Call Trace:
[ 637.730290] <IRQ> [<ffffffff8022a6a1>] __update_rq_clock+0x1a/0xcf
[ 637.730290] [<ffffffff8026ca2f>] __report_bad_irq+0x30/0x72
[ 637.730290] [<ffffffff8026cc6e>] note_interrupt+0x1fd/0x23f
[ 637.730290] [<ffffffff8026d4fb>] handle_fasteoi_irq+0xa5/0xc8
[ 637.730290] [<ffffffff8020f41c>] do_IRQ+0x6d/0xd9
[ 637.730290] [<ffffffff8020c34d>] ret_from_intr+0x0/0x19
[ 637.730290] <EOI> [<ffffffff802203f0>] hpet_legacy_next_event+0x0/0x34
[ 637.730290] [<ffffffff8802b44a>] :processor:acpi_idle_enter_simple+0x18d/0x1ff
[ 637.730290] [<ffffffff803a1e6f>] cpuidle_idle_call+0x7a/0xb3
[ 637.730290] [<ffffffff803a1df5>] cpuidle_idle_call+0x0/0xb3
[ 637.730290] [<ffffffff8020af52>] cpu_idle+0x89/0xb3
[ 637.730290]
[ 637.730290] handlers:
[ 637.730290] [<ffffffff8810c9e4>] (sdhci_irq+0x0/0x609 [sdhci])
[ 637.730290] Disabling IRQ #19
--
David Härdeman
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/