Re: 2.6.26-rc9-git9 doesn't boot on Macintel

[Justin Mattock]

On Mon, Jul 14, 2008 at 1:51 PM, Jack Howarth <howarth@xxxxxxxxxxxxxxxxx> wrote:
>   Is anyone able to boot the 2.6.26rc9git9 or 2.6.26rc9git12
> kernels on a Macintel machine? On my MacBook Pro (second gen with
> rEFIt installed for dual booting), I find that MMCONFIG doesn't
> seem to be in use under the 2.6.26 kernels. I get the following
> hang when booting rc9git9 or rc9git12...
>
> ACPI: bus type pci registered
> PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
> PCI: Not using MMCONFIG
> PCI: Using configuration type 1 for base access
> ACPI: EC: EC description table is found, configuring boot EC
> ACPI: EC: non-query interrupt received switching to interrupt mode
> ACPI: BIOS_OSI (Linux) query ignored via DMI
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
> PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
> PCI: Not using MMCONFIG
> ACPI: EC:GPE=0x17, I/O: command/status=0x66, data=0x62
> ACPI: EC: driver started in interrupt mode
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>
> This compares to the same section in a normal boot of 2.6.25.10...
>
> ACPI: bus type pci registered
> PCI: Using MMCONFIG at f0000000 - ffffffff
> PCI: Using configuration type 1
> ACPI: EC: EC description table is found, configuring boot EC
> ACPI: EC: non-query interrupt received, switching to interrupt mode
> ACPI: BIOS _OSI(Linux) query ignored via DMI
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
> ACPI: EC: driver started in poll mode
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> ACPI: EC: non-query interrupt received, switching to interrupt mode
> pnp: PnP ACPI: found 9 devices
> ACPI: ACPI bus type pnp unregistered
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
> NetLabel: Initializing
>
> ..etc. My understanding is that the EFI in use on Macintel requires the
> use of MMCONFIG so the boot failure isn't surprising but the absence of
> MMCONFIG is.
>                   Jack
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>

yeah I'm able to boot up with the latest git on macbook pro.
if want to use my .config its attached(just use caution she isn't pretty,
uneded stuff in there)
regards;

-- 
Justin P. Mattock

Attachment: config-2.6.26-rc9-00068-g70c49d7
Description: Binary data