Re: linux-next: Tree for July 16 (crash on quad core AMD)
From: Rafael J. Wysocki
Date: Wed Jul 16 2008 - 18:51:52 EST
On Wednesday, 16 of July 2008, Stephen Rothwell wrote:
> Hi all,
>
> Changes since next-20080715:
>
> Temporarily dropped tree: ttydev (it gets too many patch failures).
>
> Most of the differences were conflicts moving from tree to tree as some
> of the trees are now merged into Linus' tree. Most have been inflicted
> on the driver-core and usb trees. I have not notified these separately.
>
> Because of the moving of conflicts around it is difficult to tell when
> they are going away (though I assume some are).
>
> The usb.current tree lost its conflict against Linus' tree.
>
> The usb tree gained a conflict against Linus' tree.
>
> The cpus4096 tree gained a conflict against Linus' tree.
>
> The pci tree lost one of its build fix patches.
>
> The i2c tree lost a conflict against Linus' tree.
>
> The ide tree gained a lot of conflicts against Linus' tree because part
> of it was merged into Linus' tree but the remaining pat modified many of
> the same files further.
>
> The acpi tree gained a conflict against Linus' tree.
>
> The net tree gained a conflict against each of Linus' tree and the
> powerpc tree.
>
> The sparc tree gained conflicts against Linus' tree and the ide and
> sparc-current trees.
>
> The rr tree gained conflict against the net tree.
>
> The semaphore tree gained a conflict against the sparc tree.
>
> The generic-ipi tree gained a conflict against the powerpc tree.
>
> The ttydev series had many patches fail to apply, so it was dropped for
> today.
>
> I have also applied the following patches for known problems:
>
> sparc64: sysdev API change fallout
>
> Patches no longer necessary:
>
> s390: fix compile error due to smp_call_function
> powerpc: mman.h export fixups
> powerpc/stacktrace: EXPORT SYMBOL_GPL needs module.h
>
> This tree fails to build for ARCH=sparc (i.e. 32bit) with a 64bit gcc
> v3.4.5 - it tries to use the 64bit header files. This may be an artifact
> of one of my merge fixups, but I don't actually think so.
>
> ----------------------------------------------------------------------------
Crashes during boot on a box with Phenom X4 and AMD 790-based mainboard.
AFAICS, the Linus' tree is unaffected and linux-next from yesterday was fine
on the same box with the same .config.
Full dmesg: http://www.sisk.pl/kernel/debug/next/20080716/crash-M3A32-MVP.log
Kernel config: http://www.sisk.pl/kernel/debug/next/20080716/M3A32-MVP-config
scsi scan: INQUIRY result too short (5), using 36
scsi 2:0:0:0: Direct-Access PQ: 0 ANSI: 0
------------[ cut here ]------------
kernel BUG at /home/rafael/src/linux-next/mm/slab.c:2822!
invalid opcode: 0000 [1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.26-next #51
RIP: 0010:[<ffffffff802b59e8>] [<ffffffff802b59e8>] cache_free_debugcheck+0x288/0x2b0
RSP: 0018:ffff880127c81880 EFLAGS: 00010016
RAX: 00da9803898590c8 RBX: ffff880127c01880 RCX: 204a483235324448
RDX: 0000000000da9803 RSI: ffff880124488810 RDI: ffff880127c01880
RBP: ffff880127c818b0 R08: 0000000000000058 R09: 2222222222222222
R10: 2222222222222222 R11: 2222222222222222 R12: ffff880124488810
R13: 09f911029d74e35b R14: 09f911029d74e35b R15: ffff880124488000
FS: 0000000000000000(0000) GS:ffffffff806b7f40(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff880127c80000, task ffff880127c7e040)
Stack: ffffffff803f9bcb ffff880127c01880 ffff880127c0bad0 ffff880124488818
0000000000000282 ffff880124460000 ffff880127c818e0 ffffffff802b5c16
0000000000000000 0000000000000002 ffffffff80627d9b 0000000000000000
Call Trace:
[<ffffffff803f9bcb>] ? scsi_probe_and_add_lun+0x86b/0xc20
[<ffffffff802b5c16>] kfree+0xd6/0x160
[<ffffffff803f9bcb>] scsi_probe_and_add_lun+0x86b/0xc20
[<ffffffff803fad4f>] __scsi_add_device+0xff/0x110
[<ffffffff8040c99b>] ata_scsi_scan_host+0xdb/0x2b0
[<ffffffff804094b3>] ata_host_register+0x243/0x2a0
[<ffffffff8041b920>] ? ahci_interrupt+0x0/0x530
[<ffffffff804095b4>] ata_host_activate+0xa4/0x110
[<ffffffff8041b668>] ahci_init_one+0x9a8/0xc60
[<ffffffff80378fb9>] pci_device_probe+0x79/0xa0
[<ffffffff803e6aab>] driver_probe_device+0x9b/0x1a0
[<ffffffff803e6c36>] __driver_attach+0x86/0x90
[<ffffffff803e6bb0>] ? __driver_attach+0x0/0x90
[<ffffffff803e5ffd>] bus_for_each_dev+0x5d/0x90
[<ffffffff803e68ec>] driver_attach+0x1c/0x20
[<ffffffff803e6525>] bus_add_driver+0xc5/0x250
[<ffffffff803e6e0f>] driver_register+0x5f/0x140
[<ffffffff8037927d>] __pci_register_driver+0x7d/0xc0
[<ffffffff806f00c0>] ? ahci_init+0x0/0x20
[<ffffffff806f00d9>] ahci_init+0x19/0x20
[<ffffffff806c8a48>] kernel_init+0x128/0x310
[<ffffffff8026167f>] ? trace_hardirqs_on_caller+0xbf/0x150
[<ffffffff8026171d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff804ff1eb>] ? _spin_unlock_irq+0x2b/0x40
[<ffffffff804fea80>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8026167f>] ? trace_hardirqs_on_caller+0xbf/0x150
[<ffffffff8020c6d9>] child_rip+0xa/0x11
[<ffffffff8020bd0f>] ? restore_args+0x0/0x30
[<ffffffff806c8920>] ? kernel_init+0x0/0x310
[<ffffffff8020c6cf>] ? child_rip+0x0/0x11
Code: 48 8b 40 10 48 8b 08 f6 c5 40 0f 84 06 fe ff ff 48 8b 40 10 48 8b 08 e9 fa fd ff ff 0f 1f 80 00 00 00 00 0f 0b eb fe 0f 0b eb fe <0f> 0b eb fe 0f 1f 40 00 48
RIP [<ffffffff802b59e8>] cache_free_debugcheck+0x288/0x2b0
RSP <ffff880127c81880>
---[ end trace c69efc8b7b1131cd ]---
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: swapper Tainted: G D 2.6.26-next #51
Call Trace:
[<ffffffff8023c240>] panic+0xa0/0x190
[<ffffffff802577f9>] ? up+0x19/0x50
[<ffffffff8023d0f7>] ? printk+0x67/0x70
[<ffffffff803be042>] ? account+0xc2/0x100
[<ffffffff803be1ee>] ? extract_entropy+0x7e/0xa0
[<ffffffff8024063f>] do_exit+0x8bf/0x8d0
[<ffffffff803be22b>] ? get_random_bytes+0x1b/0x20
[<ffffffff8020cbd5>] oops_end+0x85/0x90
[<ffffffff8020d84e>] die+0x5e/0x90
[<ffffffff8020da30>] do_trap+0x130/0x150
[<ffffffff8020e84c>] do_invalid_op+0x9c/0xc0
[<ffffffff802b59e8>] ? cache_free_debugcheck+0x288/0x2b0
[<ffffffff80311490>] ? sysfs_ilookup_test+0x0/0x20
[<ffffffff804fede6>] ? _spin_unlock+0x26/0x30
[<ffffffff803e9927>] ? attribute_container_device_trigger+0x27/0xd0
[<ffffffff804ff54d>] error_exit+0x0/0xa9
[<ffffffff802b59e8>] ? cache_free_debugcheck+0x288/0x2b0
[<ffffffff803f9bcb>] ? scsi_probe_and_add_lun+0x86b/0xc20
[<ffffffff802b5c16>] kfree+0xd6/0x160
[<ffffffff803f9bcb>] scsi_probe_and_add_lun+0x86b/0xc20
[<ffffffff803fad4f>] __scsi_add_device+0xff/0x110
[<ffffffff8040c99b>] ata_scsi_scan_host+0xdb/0x2b0
[<ffffffff804094b3>] ata_host_register+0x243/0x2a0
[<ffffffff8041b920>] ? ahci_interrupt+0x0/0x530
[<ffffffff804095b4>] ata_host_activate+0xa4/0x110
[<ffffffff8041b668>] ahci_init_one+0x9a8/0xc60
[<ffffffff80378fb9>] pci_device_probe+0x79/0xa0
[<ffffffff803e6aab>] driver_probe_device+0x9b/0x1a0
[<ffffffff803e6c36>] __driver_attach+0x86/0x90
[<ffffffff803e6bb0>] ? __driver_attach+0x0/0x90
[<ffffffff803e5ffd>] bus_for_each_dev+0x5d/0x90
[<ffffffff803e68ec>] driver_attach+0x1c/0x20
[<ffffffff803e6525>] bus_add_driver+0xc5/0x250
[<ffffffff803e6e0f>] driver_register+0x5f/0x140
[<ffffffff8037927d>] __pci_register_driver+0x7d/0xc0
[<ffffffff806f00c0>] ? ahci_init+0x0/0x20
[<ffffffff806f00d9>] ahci_init+0x19/0x20
[<ffffffff806c8a48>] kernel_init+0x128/0x310
[<ffffffff8026167f>] ? trace_hardirqs_on_caller+0xbf/0x150
[<ffffffff8026171d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff804ff1eb>] ? _spin_unlock_irq+0x2b/0x40
[<ffffffff804fea80>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8026167f>] ? trace_hardirqs_on_caller+0xbf/0x150
[<ffffffff8020c6d9>] child_rip+0xa/0x11
[<ffffffff8020bd0f>] ? restore_args+0x0/0x30
[<ffffffff806c8920>] ? kernel_init+0x0/0x310
[<ffffffff8020c6cf>] ? child_rip+0x0/0x11
------------[ cut here ]------------
WARNING: at /home/rafael/src/linux-next/kernel/smp.c:288 smp_call_function_mask+0x198/0x1a0()
Modules linked in:
Pid: 1, comm: swapper Tainted: G D 2.6.26-next #51
Call Trace:
[<ffffffff8023beff>] warn_on_slowpath+0x5f/0x80
[<ffffffff8020c6cf>] ? child_rip+0x0/0x11
[<ffffffff802577f9>] ? up+0x19/0x50
[<ffffffff8023d0f7>] ? printk+0x67/0x70
[<ffffffff80267f48>] smp_call_function_mask+0x198/0x1a0
[<ffffffff8020d063>] ? dump_trace+0x373/0x400
[<ffffffff8020d14e>] ? show_trace+0x5e/0x80
[<ffffffff80267f6b>] smp_call_function+0x1b/0x20
[<ffffffff8021c4f0>] native_smp_send_stop+0x30/0x60
[<ffffffff8023c24d>] panic+0xad/0x190
[<ffffffff802577f9>] ? up+0x19/0x50
[<ffffffff8023d0f7>] ? printk+0x67/0x70
[<ffffffff803be042>] ? account+0xc2/0x100
[<ffffffff803be1ee>] ? extract_entropy+0x7e/0xa0
[<ffffffff8024063f>] do_exit+0x8bf/0x8d0
[<ffffffff803be22b>] ? get_random_bytes+0x1b/0x20
[<ffffffff8020cbd5>] oops_end+0x85/0x90
[<ffffffff8020d84e>] die+0x5e/0x90
[<ffffffff8020da30>] do_trap+0x130/0x150
[<ffffffff8020e84c>] do_invalid_op+0x9c/0xc0
[<ffffffff802b59e8>] ? cache_free_debugcheck+0x288/0x2b0
[<ffffffff80311490>] ? sysfs_ilookup_test+0x0/0x20
[<ffffffff804fede6>] ? _spin_unlock+0x26/0x30
[<ffffffff803e9927>] ? attribute_container_device_trigger+0x27/0xd0
[<ffffffff804ff54d>] error_exit+0x0/0xa9
[<ffffffff802b59e8>] ? cache_free_debugcheck+0x288/0x2b0
[<ffffffff803f9bcb>] ? scsi_probe_and_add_lun+0x86b/0xc20
[<ffffffff802b5c16>] kfree+0xd6/0x160
[<ffffffff803f9bcb>] scsi_probe_and_add_lun+0x86b/0xc20
[<ffffffff803fad4f>] __scsi_add_device+0xff/0x110
[<ffffffff8040c99b>] ata_scsi_scan_host+0xdb/0x2b0
[<ffffffff804094b3>] ata_host_register+0x243/0x2a0
[<ffffffff8041b920>] ? ahci_interrupt+0x0/0x530
[<ffffffff804095b4>] ata_host_activate+0xa4/0x110
[<ffffffff8041b668>] ahci_init_one+0x9a8/0xc60
[<ffffffff80378fb9>] pci_device_probe+0x79/0xa0
[<ffffffff803e6aab>] driver_probe_device+0x9b/0x1a0
[<ffffffff803e6c36>] __driver_attach+0x86/0x90
[<ffffffff803e6bb0>] ? __driver_attach+0x0/0x90
[<ffffffff803e5ffd>] bus_for_each_dev+0x5d/0x90
[<ffffffff803e68ec>] driver_attach+0x1c/0x20
[<ffffffff803e6525>] bus_add_driver+0xc5/0x250
[<ffffffff803e6e0f>] driver_register+0x5f/0x140
[<ffffffff8037927d>] __pci_register_driver+0x7d/0xc0
[<ffffffff806f00c0>] ? ahci_init+0x0/0x20
[<ffffffff806f00d9>] ahci_init+0x19/0x20
[<ffffffff806c8a48>] kernel_init+0x128/0x310
[<ffffffff8026167f>] ? trace_hardirqs_on_caller+0xbf/0x150
[<ffffffff8026171d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff804ff1eb>] ? _spin_unlock_irq+0x2b/0x40
[<ffffffff804fea80>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff8026167f>] ? trace_hardirqs_on_caller+0xbf/0x150
[<ffffffff8020c6d9>] child_rip+0xa/0x11
[<ffffffff8020bd0f>] ? restore_args+0x0/0x30
[<ffffffff806c8920>] ? kernel_init+0x0/0x310
[<ffffffff8020c6cf>] ? child_rip+0x0/0x11
---[ end trace c69efc8b7b1131cd ]---
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/