Re: [PATCH] leds: implement OpenFirmare GPIO LED driver

[Anton Vorontsov]

On Thu, Jul 17, 2008 at 07:59:03AM +0200, Segher Boessenkool wrote:
>> diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt  
>> b/Documentation/powerpc/dts-bindings/gpio/led.txt
>> new file mode 100644
>> index 0000000..7e9ce81
>> --- /dev/null
>> +++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
>> @@ -0,0 +1,15 @@
>> +LED connected to GPIO
>> +
>> +Required properties:
>> +- compatible : should be "gpio-led".
>
> This "compatible" name is a bit too generic.  No, I don't know a
> better name :-(
>
>> +- label : (optional) the label for this LED. If omitted, the label is
>> +  taken from the node name (excluding the unit address).
>
> What is a label? 

The label that is written on the board for this particular LED, or
the label that hardware documentation refers to.

> It should be described here.  Also, its encoding
> should be described ("a string" I guess).

Yes.

>> +- gpios : should specify LED GPIO.
>> +
>> +Example:
>> +
>> +led@0 {
>> +	compatible = "gpio-led";
>> +	label = "hdd";
>> +	gpios = <&mcu_pio 0 0>;
>> +};
>
> You show a unit address but have no "reg" value.  This is
> incorrect.

Hm.. how could I enumerate them then? Or should I just give them the
full names, i.e. "led-hdd" or something?

> What would be the parent node of this, btw?

This is tricky question. Personally I place them inside the gpio
controller node that is responsible for the LED. But I think placing the
led nodes at top level would be also fine (maybe with "leds { }" node as
a parent for all board's LEDs. What would you suggest for a "best
practice"?

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru@xxxxxxxxx
irc://irc.freenode.net/bd2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/