Re: [PATCH] Re: AMD Mobile Semprons (3500+, 3600+,...) break withnohz and highres enabled

From: Richard
Date: Thu Jul 17 2008 - 12:49:31 EST

Thomas Gleixner wrote:
On Thu, 17 Jul 2008, Richard wrote:
Prepare to be spammed.... I am using a Sabayon build, but all distros I have
tried exibit the same behavior to me. the nohz=off options also works quite
well. (I have a 2.6.26 vanilla that behaves the same)

but for now, I am off to read and setup the netconsole.

Thanks for the boot log. That looks familiar:

Jul 14 11:12:23 localhost [ 0.098984] ..MP-BIOS bug: 8254 timer not connected
to IO-APIC

We have a fix for that in Linus tree. Any chance to give current
mainline a test ride ?

Thanks,

tglx


Here you go.. a 2.6.26-tip dmesg (the top seems to be missing for some reason!) .. just shout if you need the bits on the top.


Richard



n DSDT
[ 0.074620] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.338551] ACPI: Interpreter enabled
[ 0.338594] ACPI: (supports S0 S3 S4 S5)
[ 0.338762] ACPI: Using IOAPIC for interrupt routing
[ 0.349915] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.349980] ACPI: EC: driver started in interrupt mode
[ 0.350114] ACPI: PCI Root Bridge [C08B] (0000:00)
[ 0.350352] PCI: 0000:00:12.0 reg 10 io port: [9000, 9007]
[ 0.350395] PCI: 0000:00:12.0 reg 14 io port: [9008, 900b]
[ 0.350438] PCI: 0000:00:12.0 reg 18 io port: [9010, 9017]
[ 0.350481] PCI: 0000:00:12.0 reg 1c io port: [5018, 501b]
[ 0.350524] PCI: 0000:00:12.0 reg 20 io port: [5020, 502f]
[ 0.350568] PCI: 0000:00:12.0 reg 24 32bit mmio: [d0609000, d06093ff]
[ 0.350627] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.350682] PCI: 0000:00:13.0 reg 10 32bit mmio: [d0601000, d0601fff]
[ 0.350771] PCI: 0000:00:13.1 reg 10 32bit mmio: [d0602000, d0602fff]
[ 0.350860] PCI: 0000:00:13.2 reg 10 32bit mmio: [d0603000, d0603fff]
[ 0.350953] PCI: 0000:00:13.3 reg 10 32bit mmio: [d0604000, d0604fff]
[ 0.351043] PCI: 0000:00:13.4 reg 10 32bit mmio: [d0605000, d0605fff]
[ 0.351152] PCI: 0000:00:13.5 reg 10 32bit mmio: [d0606000, d06060ff]
[ 0.351260] PCI: 0000:00:14.0 reg 10 io port: [8200, 820f]
[ 0.351352] PCI: 0000:00:14.1 reg 10 io port: [0, 7]
[ 0.351395] PCI: 0000:00:14.1 reg 14 io port: [0, 3]
[ 0.351439] PCI: 0000:00:14.1 reg 18 io port: [0, 7]
[ 0.351482] PCI: 0000:00:14.1 reg 1c io port: [0, 3]
[ 0.351526] PCI: 0000:00:14.1 reg 20 io port: [5040, 504f]
[ 0.351617] PCI: 0000:00:14.2 reg 10 64bit mmio: [d0608000, d060bfff]
[ 0.351856] PCI: 0000:01:05.0 reg 10 64bit mmio: [c0000000, c7ffffff]
[ 0.351898] PCI: 0000:01:05.0 reg 18 64bit mmio: [d0400000, d040ffff]
[ 0.351939] PCI: 0000:01:05.0 reg 20 io port: [4000, 40ff]
[ 0.352018] PCI: 0000:01:05.0 reg 24 32bit mmio: [d0500000, d05fffff]
[ 0.352074] PCI: bridge 0000:00:01.0 io port: [4000, 4fff]
[ 0.352112] PCI: bridge 0000:00:01.0 32bit mmio: [d0400000, d05fffff]
[ 0.352151] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, c7ffffff]
[ 0.352272] PCI: 0000:10:00.0 reg 10 64bit mmio: [d0000000, d000ffff]
[ 0.352384] PCI: bridge 0000:00:04.0 32bit mmio: [d0000000, d00fffff]
[ 0.352464] PCI: bridge 0000:00:05.0 io port: [2000, 3fff]
[ 0.352502] PCI: bridge 0000:00:05.0 32bit mmio: [cc000000, cfffffff]
[ 0.352582] PCI: 0000:30:00.0 reg 10 64bit mmio: [c8000000, c8003fff]
[ 0.352696] PCI: bridge 0000:00:06.0 32bit mmio: [c8000000, c80fffff]
[ 0.352783] PCI: 0000:02:04.0 reg 10 32bit mmio: [d0100000, d0100fff]
[ 0.352864] PCI: 0000:02:04.1 reg 10 32bit mmio: [d0101000, d01017ff]
[ 0.353004] PCI: Transparent bridge - 0000:00:14.4
[ 0.354945] PCI: bridge 0000:00:14.4 32bit mmio: [d0100000, d03fffff]
[ 0.354945] ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT]
[ 0.354945] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT]
[ 0.354945] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT]
[ 0.377286] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled.
[ 0.377681] ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled.
[ 0.378076] ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled.
[ 0.378466] ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled.
[ 0.378855] ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled.
[ 0.379263] ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled.
[ 0.379617] ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled.
[ 0.380005] ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled.
[ 0.380399] ACPI: Power Resource [C171] (off)
[ 0.380637] ACPI: Power Resource [C230] (off)
[ 0.380727] ACPI: Power Resource [C24C] (on)
[ 0.380894] ACPI: Power Resource [C395] (off)
[ 0.381032] ACPI: Power Resource [C396] (off)
[ 0.381163] ACPI: Power Resource [C397] (off)
[ 0.381294] ACPI: Power Resource [C398] (off)
[ 0.381629] ACPI: WMI: Mapper loaded
[ 0.381671] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.381743] pnp: PnP ACPI init
[ 0.381790] ACPI: bus type pnp registered
[ 0.392418] pnp: PnP ACPI: found 14 devices
[ 0.392463] ACPI: ACPI bus type pnp unregistered
[ 0.392750] SCSI subsystem initialized
[ 0.392820] libata version 3.00 loaded.
[ 0.393028] usbcore: registered new interface driver usbfs
[ 0.393133] usbcore: registered new interface driver hub
[ 0.393214] usbcore: registered new device driver usb
[ 0.393470] PCI: Using ACPI for IRQ routing
[ 0.393549] PCI: Cannot allocate resource region 0 of device 0000:00:14.2
[ 0.398952] NetLabel: Initializing
[ 0.398994] NetLabel: domain hash size = 128
[ 0.399030] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.399083] NetLabel: unlabeled traffic allowed by default
[ 0.399252] ACPI: RTC can wake from S4
[ 0.401956] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.401999] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.402038] system 00:00: iomem range 0x100000-0xffffffff could not be reserved
[ 0.402092] system 00:0a: ioport range 0x40b-0x40b has been reserved
[ 0.402130] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.402168] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
[ 0.402207] system 00:0a: ioport range 0x500-0x51f has been reserved
[ 0.402245] system 00:0a: ioport range 0xc00-0xc01 has been reserved
[ 0.402283] system 00:0a: ioport range 0xc14-0xc14 has been reserved
[ 0.402322] system 00:0a: ioport range 0xc50-0xc51 has been reserved
[ 0.402360] system 00:0a: ioport range 0xc52-0xc52 has been reserved
[ 0.402399] system 00:0a: ioport range 0xc6c-0xc6c has been reserved
[ 0.402437] system 00:0a: ioport range 0xc6f-0xc6f has been reserved
[ 0.402476] system 00:0a: ioport range 0xcd0-0xcdf has been reserved
[ 0.402516] system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.402559] system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.402607] system 00:0c: ioport range 0x8000-0x802f has been reserved
[ 0.402645] system 00:0c: ioport range 0x8100-0x811f has been reserved
[ 0.402685] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.402727] system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.402770] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.402816] system 00:0d: iomem range 0xcd400-0xcffff has been reserved
[ 0.402856] system 00:0d: iomem range 0xd2a00-0xd2fff has been reserved
[ 0.402894] system 00:0d: iomem range 0x0-0x7ffffff could not be reserved
[ 0.402933] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.403431] PCI: region 0000:02:04.0/9 too large: 0x0000000000000000-0x0000000003ffffff
[ 0.403487] PCI: Bridge: 0000:00:01.0
[ 0.403523] IO window: 4000-4fff
[ 0.403560] MEM window: 0xd0400000-0xd05fffff
[ 0.403597] PREFETCH window: 0x00000000c0000000-0x00000000c7ffffff
[ 0.403636] PCI: Bridge: 0000:00:04.0
[ 0.403671] IO window: disabled.
[ 0.403708] MEM window: 0xd0000000-0xd00fffff
[ 0.403744] PREFETCH window: disabled.
[ 0.403781] PCI: Bridge: 0000:00:05.0
[ 0.403817] IO window: 2000-3fff
[ 0.403853] MEM window: 0xcc000000-0xcfffffff
[ 0.403890] PREFETCH window: disabled.
[ 0.403948] Switched to high resolution mode on CPU 0
[ 0.403953] PCI: Bridge: 0000:00:06.0
[ 0.403990] IO window: disabled.
[ 0.404036] MEM window: 0xc8000000-0xc80fffff
[ 0.404074] PREFETCH window: disabled.
[ 0.404115] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 0.404152] IO window: 0x00001000-0x000010ff
[ 0.404193] IO window: 0x00001400-0x000014ff
[ 0.404232] MEM window: 0x8c000000-0x8fffffff
[ 0.404273] PCI: Bridge: 0000:00:14.4
[ 0.404311] IO window: 1000-1fff
[ 0.404351] MEM window: 0xd0100000-0xd03fffff
[ 0.404391] PREFETCH window: disabled.
[ 0.404448] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.404456] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.404463] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.404485] vendor=1002 device=4384
[ 0.404525] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 0.404603] bus: 00 index 0 io port: [0, ffff]
[ 0.404641] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.404679] bus: 01 index 0 io port: [4000, 4fff]
[ 0.404716] bus: 01 index 1 mmio: [d0400000, d05fffff]
[ 0.404754] bus: 01 index 2 mmio: [c0000000, c7ffffff]
[ 0.404792] bus: 01 index 3 mmio: [0, 0]
[ 0.404829] bus: 10 index 0 mmio: [0, 0]
[ 0.404866] bus: 10 index 1 mmio: [d0000000, d00fffff]
[ 0.404904] bus: 10 index 2 mmio: [0, 0]
[ 0.404940] bus: 10 index 3 mmio: [0, 0]
[ 0.404978] bus: 20 index 0 io port: [2000, 3fff]
[ 0.405024] bus: 20 index 1 mmio: [cc000000, cfffffff]
[ 0.405063] bus: 20 index 2 mmio: [0, 0]
[ 0.405099] bus: 20 index 3 mmio: [0, 0]
[ 0.405137] bus: 30 index 0 mmio: [0, 0]
[ 0.405174] bus: 30 index 1 mmio: [c8000000, c80fffff]
[ 0.405212] bus: 30 index 2 mmio: [0, 0]
[ 0.405249] bus: 30 index 3 mmio: [0, 0]
[ 0.405286] bus: 02 index 0 io port: [1000, 1fff]
[ 0.405323] bus: 02 index 1 mmio: [d0100000, d03fffff]
[ 0.405361] bus: 02 index 2 mmio: [0, 0]
[ 0.405398] bus: 02 index 3 io port: [0, ffff]
[ 0.405435] bus: 02 index 4 mmio: [0, ffffffffffffffff]
[ 0.405473] bus: 03 index 0 io port: [1000, 10ff]
[ 0.405510] bus: 03 index 1 io port: [1400, 14ff]
[ 0.405549] bus: 03 index 2 mmio: [0, 3ffffff]
[ 0.405586] bus: 03 index 3 mmio: [8c000000, 8fffffff]
[ 0.405635] NET: Registered protocol family 2
[ 0.415123] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.416256] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.418411] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.418905] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.418949] TCP reno registered
[ 0.422086] NET: Registered protocol family 1
[ 0.422228] checking if image is initramfs... it is
[ 0.656268] Freeing initrd memory: 4264k freed
[ 0.659311] audit: initializing netlink socket (disabled)
[ 0.659364] type=2000 audit(1216316121.658:1): initialized
[ 0.659640] Total HugeTLB memory allocated, 0
[ 0.663226] VFS: Disk quotas dquot_6.5.1
[ 0.663372] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.665729] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 0.666854] NTFS driver 2.1.29 [Flags: R/W].
[ 0.667311] QNX4 filesystem 0.2.3 registered.
[ 0.667351] fuse init (API version 7.9)
[ 0.667840] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.670878] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.671883] SGI XFS Quota Management subsystem
[ 0.671936] msgmni has been set to 3761
[ 0.672209] async_tx: api initialized (async)
[ 0.672342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.672385] io scheduler noop registered
[ 0.672422] io scheduler anticipatory registered
[ 0.672459] io scheduler deadline registered
[ 0.672672] io scheduler cfq registered (default)
[ 0.672781] pci 0000:01:05.0: Boot video device
[ 0.672933] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.672953] assign_interrupt_mode Found MSI capability
[ 0.673031] Allocate Port Service[0000:00:04.0:pcie00]
[ 0.673101] Allocate Port Service[0000:00:04.0:pcie03]
[ 0.673184] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 0.673202] assign_interrupt_mode Found MSI capability
[ 0.673260] Allocate Port Service[0000:00:05.0:pcie00]
[ 0.673318] Allocate Port Service[0000:00:05.0:pcie03]
[ 0.673401] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.673418] assign_interrupt_mode Found MSI capability
[ 0.673475] Allocate Port Service[0000:00:06.0:pcie00]
[ 0.673534] Allocate Port Service[0000:00:06.0:pcie03]
[ 0.675061] ACPI: AC Adapter [C1EB] (off-line)
[ 0.736752] ACPI: Battery Slot [C1ED] (battery present)
[ 0.737036] ACPI: Battery Slot [C1EC] (battery absent)
[ 0.737277] input: Power Button (FF) as /class/input/input0
[ 0.737316] ACPI: Power Button (FF) [PWRF]
[ 0.737503] input: Sleep Button (CM) as /class/input/input1
[ 0.737541] ACPI: Sleep Button (CM) [C28D]
[ 0.737680] input: Lid Switch as /class/input/input2
[ 0.737798] ACPI: Lid Switch [C265]
[ 0.738159] ACPI: Transitioning device [C399] to D3
[ 0.738271] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 0.738313] ACPI: Fan [C399] (off)
[ 0.738533] ACPI: Transitioning device [C39A] to D3
[ 0.738631] ACPI: PNP0C0B:01 is registered as cooling_device1
[ 0.738672] ACPI: Fan [C39A] (off)
[ 0.738890] ACPI: Transitioning device [C39B] to D3
[ 0.738999] ACPI: PNP0C0B:02 is registered as cooling_device2
[ 0.739040] ACPI: Fan [C39B] (off)
[ 0.739263] ACPI: Transitioning device [C39C] to D3
[ 0.739361] ACPI: PNP0C0B:03 is registered as cooling_device3
[ 0.739404] ACPI: Fan [C39C] (off)
[ 0.739690] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.739909] ACPI: ACPI0007:00 is registered as cooling_device4
[ 0.739949] ACPI: Processor [C000] (supports 8 throttling states)
[ 0.752713] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 0.757844] ACPI: Thermal Zone [TZ1] (45 C)
[ 0.813424] lp: driver loaded but no devices found
[ 0.825644] ppdev: user-space parallel port driver
[ 0.825693] Linux agpgart interface v0.103
[ 0.825747] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.830562] parport_pc 00:02: activated
[ 0.830611] parport_pc 00:02: reported by Plug and Play ACPI
[ 0.831964] parport_pc 00:02: disabled
[ 0.832721] Floppy drive(s): fd0 is 1.44M
[ 3.842993] floppy0: no floppy controllers found
[ 3.845070] brd: module loaded
[ 3.846157] loop: module loaded
[ 3.846202] Compaq SMART2 Driver (v 2.6.0)
[ 3.846333] HP CISS Driver (v 3.6.20)
[ 3.846748] MM: desc_per_page = 128
[ 3.846958] input: Macintosh mouse button emulation as /class/input/input3
[ 3.847366] Loading iSCSI transport class v2.0-870.
[ 3.848240] iscsi: registered transport (tcp)
[ 3.848652] Adaptec aacraid driver 1.1-5[2456]-ms
[ 3.848876] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 3.849412] QLogic Fibre Channel HBA Driver: 8.02.01-k4
[ 3.849630] iscsi: registered transport (qla4xxx)
[ 3.849763] QLogic iSCSI HBA Driver
[ 3.849813] Emulex LightPulse Fibre Channel SCSI driver 8.2.7
[ 3.849857] Copyright(c) 2004-2008 Emulex. All rights reserved.
[ 3.850303] DC390: clustering now enabled by default. If you get problems load
[ 3.850305] with "disable_clustering=1" and report to maintainers
[ 3.850576] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 3.850703] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 3.850867] megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
[ 3.851092] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 3.851361] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 3.851487] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
[ 3.851607] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[ 3.851738] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
[ 3.851860] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 3.852092] st: Version 20080224, fixed bufsize 32768, s/g segs 256
[ 3.852204] Driver 'st' needs updating - please use bus_type methods
[ 3.852320] osst :I: Tape driver with OnStream support version 0.99.4
[ 3.852321] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 3.852476] Driver 'osst' needs updating - please use bus_type methods
[ 3.852644] Driver 'sd' needs updating - please use bus_type methods
[ 3.852752] Driver 'sr' needs updating - please use bus_type methods
[ 3.852946] ahci 0000:00:12.0: version 3.0
[ 3.852992] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.853112] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 3.853238] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 3.853288] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part
[ 3.853521] scsi0 : ahci
[ 3.853817] scsi1 : ahci
[ 3.854056] scsi2 : ahci
[ 3.854236] scsi3 : ahci
[ 3.854429] ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16
[ 3.854485] ata2: DUMMY
[ 3.854527] ata3: DUMMY
[ 3.854569] ata4: DUMMY
[ 4.159002] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.159449] ata1.00: ATA-7: FUJITSU MHW2080BH PL, 891F, max UDMA/100
[ 4.159493] ata1.00: 156301488 sectors, multi 16: LBA48
[ 4.159550] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.160129] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.160175] ata1.00: configured for UDMA/100
[ 4.160298] isa bounce pool size: 16 pages
[ 4.160433] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 891F PQ: 0 ANSI: 5
[ 4.160724] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.160791] sd 0:0:0:0: [sda] Write Protect is off
[ 4.160835] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.160869] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.161016] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.161081] sd 0:0:0:0: [sda] Write Protect is off
[ 4.161125] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.161160] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.161216] sda: sda1 sda2 < sda5 sda6 >
[ 4.277514] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.277687] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.279082] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.279302] scsi4 : pata_atiixp
[ 4.279498] scsi5 : pata_atiixp
[ 4.280281] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14
[ 4.280334] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15
[ 4.469539] ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH17, max MWDMA2
[ 4.510480] ata5.00: configured for MWDMA2
[ 4.667387] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH17 PQ: 0 ANSI: 5
[ 4.696182] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.696239] Uniform CD-ROM driver Revision: 3.20
[ 4.696490] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.696605] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.699033] I2O subsystem v1.325
[ 4.699088] i2o: max drivers = 8
[ 4.699360] I2O Configuration OSM v1.323
[ 4.699545] I2O Bus Adapter OSM v1.317
[ 4.699653] I2O Block Device OSM v1.325
[ 4.699951] I2O SCSI Peripheral OSM v1.316
[ 4.700078] I2O ProcFS OSM v1.316
[ 4.700199] Fusion MPT base driver 3.04.07
[ 4.700242] Copyright (c) 1999-2008 LSI Corporation
[ 4.700289] Fusion MPT SPI Host driver 3.04.07
[ 4.700443] Fusion MPT FC Host driver 3.04.07
[ 4.700578] Fusion MPT SAS Host driver 3.04.07
[ 4.700713] Fusion MPT misc device (ioctl) driver 3.04.07
[ 4.700835] mptctl: Registered with Fusion MPT base driver
[ 4.700879] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 4.700930] Fusion MPT LAN driver 3.04.07
[ 4.701517] vendor=1002 device=4384
[ 4.701567] ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 4.754060] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0101000-d01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.758617] usbcore: registered new interface driver usblp
[ 4.758664] Initializing USB Mass Storage driver...
[ 4.758778] usbcore: registered new interface driver usb-storage
[ 4.758824] USB Mass Storage support registered.
[ 4.758941] usbcore: registered new interface driver libusual
[ 4.759158] PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12
[ 4.761160] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 4.761938] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.762015] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.762060] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.762110] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.762154] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.770860] parkbd: no such parport
[ 4.775084] mice: PS/2 mouse device common for all mice
[ 4.787583] md: linear personality registered for level -1
[ 4.787635] md: raid0 personality registered for level 0
[ 4.787679] md: raid1 personality registered for level 1
[ 4.787729] md: raid10 personality registered for level 10
[ 4.803982] raid6: int64x1 1464 MB/s
[ 4.820996] raid6: int64x2 1984 MB/s
[ 4.837971] raid6: int64x4 1839 MB/s
[ 4.854999] raid6: int64x8 1589 MB/s
[ 4.871982] raid6: sse2x1 2261 MB/s
[ 4.888988] raid6: sse2x2 3000 MB/s
[ 4.905987] raid6: sse2x4 3140 MB/s
[ 4.906036] raid6: using algorithm sse2x4 (3140 MB/s)
[ 4.906080] md: raid6 personality registered for level 6
[ 4.906125] md: raid5 personality registered for level 5
[ 4.906174] md: raid4 personality registered for level 4
[ 4.906219] md: multipath personality registered for level -4
[ 4.906269] md: faulty personality registered for level -5
[ 4.906543] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
[ 4.907132] cpuidle: using governor ladder
[ 4.907668] cpuidle: using governor menu
[ 4.927044] input: AT Translated Set 2 keyboard as /class/input/input4
[ 4.931757] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.931951] usbcore: registered new interface driver hiddev
[ 4.932067] usbcore: registered new interface driver usbhid
[ 4.932118] usbhid: v2.6:USB HID core driver
[ 4.932882] TCP bic registered
[ 4.932928] NET: Registered protocol family 17
[ 4.933231] RPC: Registered udp transport module.
[ 4.933282] RPC: Registered tcp transport module.
[ 4.933335] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3600+ processors (1 cpu cores) (version 2.20.00)
[ 4.933445] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x10
[ 4.933490] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
[ 4.933553] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 4.933597] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18
[ 4.933677] powernow-k8: ph2 null fid transition 0xc
[ 4.934029] registered taskstats version 1
[ 4.934246] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 4.934344] Freeing unused kernel memory: 484k freed
[ 4.964679] ata1: hard resetting link
[ 5.269550] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.269935] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.270437] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.270446] ata1.00: configured for UDMA/100
[ 5.270518] ata1: EH complete
[ 5.270591] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.270617] sd 0:0:0:0: [sda] Write Protect is off
[ 5.270619] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.270658] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.329031] ehci_hcd: disagrees about version of symbol struct_module
[ 5.369905] uhci_hcd: disagrees about version of symbol struct_module
[ 5.392288] ohci_hcd: disagrees about version of symbol struct_module
[ 5.423797] sl811_hcd: disagrees about version of symbol struct_module
[ 5.558415] pata_pcmcia: disagrees about version of symbol struct_module
[ 5.596909] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
[ 5.596915] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 5.641282] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 5.749709] scsi_wait_scan: disagrees about version of symbol struct_module
[ 5.825889] e1000: disagrees about version of symbol struct_module
[ 5.850784] tg3: disagrees about version of symbol struct_module
[ 6.014804] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f99295d2f0e]
[ 11.401531] Clocksource tsc unstable (delta = -99824559 ns)
[ 17.316892] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 17.316896] EXT3-fs: write access will be enabled during recovery.
[ 17.435953] kjournald starting. Commit interval 5 seconds
[ 17.435972] EXT3-fs: recovery complete.
[ 17.436517] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.793073] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 22.830548] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.952962] tg3.c:v3.92.1 (June 9, 2008)
[ 22.953037] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.953053] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 23.174804] eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:4b:58:56:fe
[ 23.174819] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 23.174825] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 23.792903] ACPI: device:03 is registered as cooling_device5
[ 23.794864] input: Video Bus as /class/input/input6
[ 23.803636] ACPI: Video Device [C08D] (multi-head: yes rom: no post: no)
[ 24.564953] ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 24.564976] PCI: Setting latency timer of device 0000:30:00.0 to 64
[ 24.572564] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243)
[ 24.572576] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243)
[ 24.572592] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)
[ 24.572601] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243)
[ 24.582529] ssb: SPROM revision 3 detected.
[ 24.590681] ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0
[ 24.709772] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 24.709877] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 24.709910] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 24.711051] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 24.711108] ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000
[ 24.778766] usb usb1: configuration #1 chosen from 1 choice
[ 24.778860] hub 1-0:1.0: USB hub found
[ 24.778885] hub 1-0:1.0: 2 ports detected
[ 24.879913] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 24.879960] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 24.880100] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 24.880150] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000
[ 24.934815] usb usb2: configuration #1 chosen from 1 choice
[ 24.934896] hub 2-0:1.0: USB hub found
[ 24.934920] hub 2-0:1.0: 2 ports detected
[ 25.035919] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 17 (level, low) -> IRQ 17
[ 25.035961] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 25.036100] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 25.036133] ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000
[ 25.090771] usb usb3: configuration #1 chosen from 1 choice
[ 25.090863] hub 3-0:1.0: USB hub found
[ 25.090890] hub 3-0:1.0: 2 ports detected
[ 25.191958] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 25.191997] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 25.192147] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 25.192182] ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000
[ 25.246773] usb usb4: configuration #1 chosen from 1 choice
[ 25.246854] hub 4-0:1.0: USB hub found
[ 25.246879] hub 4-0:1.0: 2 ports detected
[ 25.347928] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 17 (level, low) -> IRQ 17
[ 25.347964] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 25.348114] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 25.348149] ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000
[ 25.402755] usb usb5: configuration #1 chosen from 1 choice
[ 25.402854] hub 5-0:1.0: USB hub found
[ 25.402880] hub 5-0:1.0: 2 ports detected
[ 25.421594] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 25.504214] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 23 (level, low) -> IRQ 23
[ 25.504256] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 25.504636] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 25.504715] ehci_hcd 0000:00:13.5: debug port 1
[ 25.504736] ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000
[ 25.551577] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 25.551831] usb usb6: configuration #1 chosen from 1 choice
[ 25.551914] hub 6-0:1.0: USB hub found
[ 25.551937] hub 6-0:1.0: 10 ports detected
[ 25.653213] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0
[ 25.787046] input: PC Speaker as /class/input/input7
[ 25.891022] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 25.949534] usb 3-1: device not accepting address 2, error -62
[ 25.972182] Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c2]
[ 25.972223] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 25.972228] IO window: 0x00001000-0x000010ff
[ 25.972235] IO window: 0x00001400-0x000014ff
[ 25.972248] PREFETCH window: 0x88400000-0x887fffff
[ 25.972255] MEM window: 0x8c000000-0x8fffffff
[ 26.000581] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 26.095297] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
[ 26.095310] Socket status: 30000006
[ 26.095520] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 26.095529] pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
[ 26.095535] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd03fffff
[ 26.274801] tpm_inf_pnp 00:03: Found C231 with ID IFX0102
[ 26.274862] tpm_inf_pnp 00:03: TPM found: config base 0x520, data base 0x530, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 26.680580] usb 3-1: new full speed USB device using ohci_hcd and address 4
[ 26.826743] usb 3-1: configuration #1 chosen from 1 choice
[ 26.863651] b43-phy0: Broadcom 4311 WLAN found
[ 26.897885] phy0: Selected rate control algorithm 'pid'
[ 27.164882] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 59.379874] EXT3 FS on sda5, internal journal
[ 62.372667] kjournald starting. Commit interval 5 seconds
[ 62.373549] EXT3 FS on sda1, internal journal
[ 62.373562] EXT3-fs: mounted filesystem with ordered data mode.
[ 138.575037] Adding 1397612k swap on /dev/sda6. Priority:-1 extents:1 across:1397612k

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/