Re: [PATCH] Re: AMD Mobile Semprons (3500+, 3600+,...) break withnohz and highres enabled

From: Richard
Date: Fri Jul 18 2008 - 13:16:11 EST

Thomas Gleixner wrote:
On Thu, 17 Jul 2008, Richard wrote:
Here you go.. a 2.6.26-tip dmesg (the top seems to be missing for some
reason!) .. just shout if you need the bits on the top.

Those are the interesting ones :)

Questions:

Are CONFIG_HIGHRES_TIMERS and CONFIG_NO_HZ enabled ?
Is it still necessary to add any command line option ?
Is the system stable ?

Also please provide the output of

# cat /sys/devices/system/clocksource/clocksource0/current_clocksource

and

# cat /proc/timer_list

Thanks,

tglx

log 2 of 3.. this time with no kernel parameters

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.26-tip (root@localhost) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #3 SMP Thu Jul 17 19:30:56 UTC 2008
[ 0.000000] Command line: root=/dev/ram0 ramdisk=8192 real_root=UUID=e1ef4642-3c14-4a73-be54-c04e9bcf2422 dolvm init=/linuxrc CONSOLE=/dev/tty1 resume=swap:/dev/sda6 nox netconsole=@xxxxxxxxxxx/eth0,9999@xxxxxxxxxxx/
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable)
[ 0.000000] BIOS-e820: 0000000077fb0000 - 0000000077fc8000 (reserved)
[ 0.000000] BIOS-e820: 0000000077fc8000 - 0000000077fe7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077fe7fb8 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] last_pfn = 0x77fb0 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] last_map_addr: 77fb0000 end: 77fb0000
[ 0.000000] RAMDISK: 77ad8000 - 77f9f5f9
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FE0B0, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 77FC81BC, 0064 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: FACP 77FC8084, 00F4 (r4 HP 0944 3 HP 1)
[ 0.000000] ACPI Error (tbfadt-0453): 32/64X address mismatch in "Pm2ControlBlock": [00008800] [0000000000008100], using 64X [20080321]
[ 0.000000] ACPI: DSDT 77FC84A4, 11437 (r1 HP SB400 10000 MSFT 3000001)
[ 0.000000] ACPI: FACS 77FE7D80, 0040
[ 0.000000] ACPI: SLIC 77FC8220, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: EPTH 77FC8398, 0038 (r1 HP 0944 1 HP 1)
[ 0.000000] ACPI: APIC 77FC83D0, 0062 (r1 HP 0944 1 HP 1)
[ 0.000000] ACPI: MCFG 77FC8434, 003C (r1 HP 0944 1 HP 1)
[ 0.000000] ACPI: TCPA 77FC8470, 0032 (r2 HP 0944 1 HP 1)
[ 0.000000] ACPI: SSDT 77FD98DB, 0059 (r1 HP HPQNLP 1 MSFT 3000001)
[ 0.000000] ACPI: SSDT 77FD9934, 0115 (r1 HP PSSTBLID 1 HP 1)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077fb0000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000077fb0000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000004fff]
[ 0.000000] bootmap [000000000000a000 - 0000000000018ff7] pages f
[ 0.000000] (6 early reservations) ==> bootmem
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000c5a60c] TEXT DATA BSS ==> [0000200000 - 0000c5a60c]
[ 0.000000] #3 [0077ad8000 - 0077f9f5f9] RAMDISK ==> [0077ad8000 - 0077f9f5f9]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00077fb0
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] PERCPU: Allocating 48320 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 481873
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=UUID=e1ef4642-3c14-4a73-be54-c04e9bcf2422 dolvm init=/linuxrc CONSOLE=/dev/tty1 resume=swap:/dev/sda6 nox netconsole=@xxxxxxxxxxx/eth0,9999@xxxxxxxxxxx/
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Detected 1994.895 MHz processor.
[ 0.001999] Console: colour VGA+ 80x25
[ 0.001999] console [tty0] enabled
[ 0.001999] Checking aperture...
[ 0.001999] No AGP bridge found
[ 0.001999] Node 0: aperture @ d05c000000 size 32 MB
[ 0.001999] Aperture beyond 4GB. Ignoring.
[ 0.001999] Memory: 1920920k/1965760k available (6412k kernel code, 44452k reserved, 3058k data, 484k init)
[ 0.001999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.002184] Calibrating delay loop (skipped), value calculated using timer frequency.. <6>3989.79 BogoMIPS (lpj=1994895)
[ 0.002285] Security Framework initialized
[ 0.002331] SELinux: Disabled at boot.
[ 0.002565] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005360] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.006565] Mount-cache hash table entries: 256
[ 0.006995] Initializing cgroup subsys debug
[ 0.007070] Initializing cgroup subsys ns
[ 0.007161] Initializing cgroup subsys cpuacct
[ 0.007264] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.007338] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.007430] CPU 0/0 -> Node 0
[ 0.007537] using C1E aware idle routine
[ 0.007640] ACPI: Core revision 20080321
[ 0.044993] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.054996] CPU0: Mobile AMD Sempron(tm) Processor 3600+ stepping 02
[ 0.055100] Using local APIC timer interrupts.
[ 0.056991] Detected 12.468 MHz APIC timer.
[ 0.056991] Brought up 1 CPUs
[ 0.056991] Total of 1 processors activated (3989.79 BogoMIPS).
[ 0.056991] net_namespace: 1224 bytes
[ 0.056991] xor: automatically using best checksumming function: generic_sse
[ 0.061181] generic_sse: 6148.000 MB/sec
[ 0.061221] xor: using function: generic_sse (6148.000 MB/sec)
[ 0.061294] NET: Registered protocol family 16
[ 0.061562] No dock devices found.
[ 0.061990] TOM: 0000000080000000 aka 2048M
[ 0.062005] ACPI: bus type pci registered
[ 0.062137] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.062176] PCI: MCFG area at e0000000 reserved in E820
[ 0.068370] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.068414] PCI: Using configuration type 1 for base access
[ 0.074793] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.338948] ACPI: Interpreter enabled
[ 0.338948] ACPI: (supports S0 S3 S4 S5)
[ 0.338948] ACPI: Using IOAPIC for interrupt routing
[ 0.350161] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.350208] ACPI: EC: driver started in interrupt mode
[ 0.350342] ACPI: PCI Root Bridge [C08B] (0000:00)
[ 0.350580] PCI: 0000:00:12.0 reg 10 io port: [9000, 9007]
[ 0.350623] PCI: 0000:00:12.0 reg 14 io port: [9008, 900b]
[ 0.350667] PCI: 0000:00:12.0 reg 18 io port: [9010, 9017]
[ 0.350710] PCI: 0000:00:12.0 reg 1c io port: [5018, 501b]
[ 0.350753] PCI: 0000:00:12.0 reg 20 io port: [5020, 502f]
[ 0.350797] PCI: 0000:00:12.0 reg 24 32bit mmio: [d0609000, d06093ff]
[ 0.350857] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.350912] PCI: 0000:00:13.0 reg 10 32bit mmio: [d0601000, d0601fff]
[ 0.351007] PCI: 0000:00:13.1 reg 10 32bit mmio: [d0602000, d0602fff]
[ 0.351096] PCI: 0000:00:13.2 reg 10 32bit mmio: [d0603000, d0603fff]
[ 0.351185] PCI: 0000:00:13.3 reg 10 32bit mmio: [d0604000, d0604fff]
[ 0.351274] PCI: 0000:00:13.4 reg 10 32bit mmio: [d0605000, d0605fff]
[ 0.351381] PCI: 0000:00:13.5 reg 10 32bit mmio: [d0606000, d06060ff]
[ 0.351487] PCI: 0000:00:14.0 reg 10 io port: [8200, 820f]
[ 0.351577] PCI: 0000:00:14.1 reg 10 io port: [0, 7]
[ 0.351620] PCI: 0000:00:14.1 reg 14 io port: [0, 3]
[ 0.351663] PCI: 0000:00:14.1 reg 18 io port: [0, 7]
[ 0.351706] PCI: 0000:00:14.1 reg 1c io port: [0, 3]
[ 0.351748] PCI: 0000:00:14.1 reg 20 io port: [5040, 504f]
[ 0.351837] PCI: 0000:00:14.2 reg 10 64bit mmio: [d0608000, d060bfff]
[ 0.352096] PCI: 0000:01:05.0 reg 10 64bit mmio: [c0000000, c7ffffff]
[ 0.352138] PCI: 0000:01:05.0 reg 18 64bit mmio: [d0400000, d040ffff]
[ 0.352179] PCI: 0000:01:05.0 reg 20 io port: [4000, 40ff]
[ 0.352219] PCI: 0000:01:05.0 reg 24 32bit mmio: [d0500000, d05fffff]
[ 0.352274] PCI: bridge 0000:00:01.0 io port: [4000, 4fff]
[ 0.352313] PCI: bridge 0000:00:01.0 32bit mmio: [d0400000, d05fffff]
[ 0.352353] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, c7ffffff]
[ 0.352478] PCI: 0000:10:00.0 reg 10 64bit mmio: [d0000000, d000ffff]
[ 0.352592] PCI: bridge 0000:00:04.0 32bit mmio: [d0000000, d00fffff]
[ 0.352676] PCI: bridge 0000:00:05.0 io port: [2000, 3fff]
[ 0.353945] PCI: bridge 0000:00:05.0 32bit mmio: [cc000000, cfffffff]
[ 0.353945] PCI: 0000:30:00.0 reg 10 64bit mmio: [c8000000, c8003fff]
[ 0.353945] PCI: bridge 0000:00:06.0 32bit mmio: [c8000000, c80fffff]
[ 0.354033] PCI: 0000:02:04.0 reg 10 32bit mmio: [d0100000, d0100fff]
[ 0.354201] PCI: 0000:02:04.1 reg 10 32bit mmio: [d0101000, d01017ff]
[ 0.354476] PCI: Transparent bridge - 0000:00:14.4
[ 0.354563] PCI: bridge 0000:00:14.4 32bit mmio: [d0100000, d03fffff]
[ 0.377709] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled.
[ 0.378128] ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled.
[ 0.378522] ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled.
[ 0.378916] ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled.
[ 0.379309] ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled.
[ 0.379698] ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled.
[ 0.380063] ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled.
[ 0.380463] ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled.
[ 0.380860] ACPI: Power Resource [C171] (off)
[ 0.381103] ACPI: Power Resource [C230] (off)
[ 0.381194] ACPI: Power Resource [C24C] (on)
[ 0.381367] ACPI: Power Resource [C395] (off)
[ 0.381500] ACPI: Power Resource [C396] (off)
[ 0.381633] ACPI: Power Resource [C397] (off)
[ 0.381765] ACPI: Power Resource [C398] (off)
[ 0.382126] ACPI: WMI: Mapper loaded
[ 0.382168] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.382238] pnp: PnP ACPI init
[ 0.382283] ACPI: bus type pnp registered
[ 0.393306] pnp: PnP ACPI: found 14 devices
[ 0.393353] ACPI: ACPI bus type pnp unregistered
[ 0.393724] SCSI subsystem initialized
[ 0.394020] usbcore: registered new interface driver usbfs
[ 0.394131] usbcore: registered new interface driver hub
[ 0.394216] usbcore: registered new device driver usb
[ 0.394487] PCI: Using ACPI for IRQ routing
[ 0.394569] PCI: Cannot allocate resource region 0 of device 0000:00:14.2
[ 0.399951] NetLabel: Initializing
[ 0.399993] NetLabel: domain hash size = 128
[ 0.400029] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.400082] NetLabel: unlabeled traffic allowed by default
[ 0.400246] ACPI: RTC can wake from S4
[ 0.402957] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.403000] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.403039] system 00:00: iomem range 0x100000-0xffffffff could not be reserved
[ 0.403092] system 00:0a: ioport range 0x40b-0x40b has been reserved
[ 0.403130] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.403170] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
[ 0.403208] system 00:0a: ioport range 0x500-0x51f has been reserved
[ 0.403246] system 00:0a: ioport range 0xc00-0xc01 has been reserved
[ 0.403285] system 00:0a: ioport range 0xc14-0xc14 has been reserved
[ 0.403323] system 00:0a: ioport range 0xc50-0xc51 has been reserved
[ 0.403361] system 00:0a: ioport range 0xc52-0xc52 has been reserved
[ 0.403400] system 00:0a: ioport range 0xc6c-0xc6c has been reserved
[ 0.403438] system 00:0a: ioport range 0xc6f-0xc6f has been reserved
[ 0.403476] system 00:0a: ioport range 0xcd0-0xcdf has been reserved
[ 0.403516] system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.403559] system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.403606] system 00:0c: ioport range 0x8000-0x802f has been reserved
[ 0.403644] system 00:0c: ioport range 0x8100-0x811f has been reserved
[ 0.403684] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.403727] system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.403769] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.403813] system 00:0d: iomem range 0xcd400-0xcffff has been reserved
[ 0.403851] system 00:0d: iomem range 0xd2a00-0xd2fff has been reserved
[ 0.403891] system 00:0d: iomem range 0x0-0x7ffffff could not be reserved
[ 0.403930] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.404435] PCI: region 0000:02:04.0/9 too large: 0x0000000000000000-0x0000000003ffffff
[ 0.404492] PCI: Bridge: 0000:00:01.0
[ 0.404528] IO window: 4000-4fff
[ 0.404565] MEM window: 0xd0400000-0xd05fffff
[ 0.404602] PREFETCH window: 0x00000000c0000000-0x00000000c7ffffff
[ 0.404641] PCI: Bridge: 0000:00:04.0
[ 0.404677] IO window: disabled.
[ 0.404714] MEM window: 0xd0000000-0xd00fffff
[ 0.404751] PREFETCH window: disabled.
[ 0.404788] PCI: Bridge: 0000:00:05.0
[ 0.404824] IO window: 2000-3fff
[ 0.404861] MEM window: 0xcc000000-0xcfffffff
[ 0.404898] PREFETCH window: disabled.
[ 0.404961] PCI: Bridge: 0000:00:06.0
[ 0.404998] IO window: disabled.
[ 0.405044] MEM window: 0xc8000000-0xc80fffff
[ 0.405081] PREFETCH window: disabled.
[ 0.405122] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 0.405160] IO window: 0x00001000-0x000010ff
[ 0.405201] IO window: 0x00001400-0x000014ff
[ 0.405241] MEM window: 0x8c000000-0x8fffffff
[ 0.405281] PCI: Bridge: 0000:00:14.4
[ 0.405320] IO window: 1000-1fff
[ 0.405360] MEM window: 0xd0100000-0xd03fffff
[ 0.405399] PREFETCH window: disabled.
[ 0.405493] vendor=1002 device=4384
[ 0.405534] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 0.405612] bus: 00 index 0 io port: [0, ffff]
[ 0.405650] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.405689] bus: 01 index 0 io port: [4000, 4fff]
[ 0.405726] bus: 01 index 1 mmio: [d0400000, d05fffff]
[ 0.405764] bus: 01 index 2 mmio: [c0000000, c7ffffff]
[ 0.405802] bus: 01 index 3 mmio: [0, 0]
[ 0.405839] bus: 10 index 0 mmio: [0, 0]
[ 0.405876] bus: 10 index 1 mmio: [d0000000, d00fffff]
[ 0.405914] bus: 10 index 2 mmio: [0, 0]
[ 0.405951] bus: 10 index 3 mmio: [0, 0]
[ 0.405989] bus: 20 index 0 io port: [2000, 3fff]
[ 0.406035] bus: 20 index 1 mmio: [cc000000, cfffffff]
[ 0.406073] bus: 20 index 2 mmio: [0, 0]
[ 0.406110] bus: 20 index 3 mmio: [0, 0]
[ 0.406147] bus: 30 index 0 mmio: [0, 0]
[ 0.406185] bus: 30 index 1 mmio: [c8000000, c80fffff]
[ 0.406222] bus: 30 index 2 mmio: [0, 0]
[ 0.406260] bus: 30 index 3 mmio: [0, 0]
[ 0.406297] bus: 02 index 0 io port: [1000, 1fff]
[ 0.406336] bus: 02 index 1 mmio: [d0100000, d03fffff]
[ 0.406373] bus: 02 index 2 mmio: [0, 0]
[ 0.406412] bus: 02 index 3 io port: [0, ffff]
[ 0.406450] bus: 02 index 4 mmio: [0, ffffffffffffffff]
[ 0.406488] bus: 03 index 0 io port: [1000, 10ff]
[ 0.406526] bus: 03 index 1 io port: [1400, 14ff]
[ 0.406563] bus: 03 index 2 mmio: [0, 3ffffff]
[ 0.406601] bus: 03 index 3 mmio: [8c000000, 8fffffff]
[ 0.406650] NET: Registered protocol family 2
[ 0.416120] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.417107] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.419026] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.419523] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.419567] TCP reno registered
[ 0.422095] NET: Registered protocol family 1
[ 0.422237] checking if image is initramfs... it is
[ 0.696976] Freeing initrd memory: 4893k freed
[ 0.700322] audit: initializing netlink socket (disabled)
[ 0.700374] type=2000 audit(1216403701.699:1): initialized
[ 0.700655] Total HugeTLB memory allocated, 0
[ 0.704361] VFS: Disk quotas dquot_6.5.1
[ 0.704518] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.706977] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 0.708074] NTFS driver 2.1.29 [Flags: R/W].
[ 0.708520] QNX4 filesystem 0.2.3 registered.
[ 0.708561] fuse init (API version 7.9)
[ 0.709128] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.712776] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.713822] SGI XFS Quota Management subsystem
[ 0.713877] msgmni has been set to 3761
[ 0.714112] async_tx: api initialized (async)
[ 0.714244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.714288] io scheduler noop registered
[ 0.714325] io scheduler anticipatory registered
[ 0.714363] io scheduler deadline registered
[ 0.714581] io scheduler cfq registered (default)
[ 0.714861] assign_interrupt_mode Found MSI capability
[ 0.715114] assign_interrupt_mode Found MSI capability
[ 0.715330] assign_interrupt_mode Found MSI capability
[ 1.116562] ACPI: AC Adapter [C1EB] (off-line)
[ 1.178933] ACPI: Battery Slot [C1ED] (battery present)
[ 1.179216] ACPI: Battery Slot [C1EC] (battery absent)
[ 1.179448] input: Power Button (FF) as /class/input/input0
[ 1.179488] ACPI: Power Button (FF) [PWRF]
[ 1.179674] input: Sleep Button (CM) as /class/input/input1
[ 1.179713] ACPI: Sleep Button (CM) [C28D]
[ 1.179849] input: Lid Switch as /class/input/input2
[ 1.179971] ACPI: Lid Switch [C265]
[ 1.180331] ACPI: Transitioning device [C399] to D3
[ 1.180445] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 1.180487] ACPI: Fan [C399] (off)
[ 1.180711] ACPI: Transitioning device [C39A] to D3
[ 1.180808] ACPI: PNP0C0B:01 is registered as cooling_device1
[ 1.180851] ACPI: Fan [C39A] (off)
[ 1.181088] ACPI: Transitioning device [C39B] to D3
[ 1.181186] ACPI: PNP0C0B:02 is registered as cooling_device2
[ 1.181228] ACPI: Fan [C39B] (off)
[ 1.181450] ACPI: Transitioning device [C39C] to D3
[ 1.181547] ACPI: PNP0C0B:03 is registered as cooling_device3
[ 1.181591] ACPI: Fan [C39C] (off)
[ 1.185371] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.185584] ACPI: ACPI0007:00 is registered as cooling_device4
[ 1.185625] ACPI: Processor [C000] (supports 8 throttling states)
[ 1.198182] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.203223] ACPI: Thermal Zone [TZ1] (68 C)
[ 1.256731] lp: driver loaded but no devices found
[ 1.265733] ppdev: user-space parallel port driver
[ 1.265782] Linux agpgart interface v0.103
[ 1.265834] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.270646] parport_pc 00:02: activated
[ 1.270701] parport_pc 00:02: reported by Plug and Play ACPI
[ 1.272074] parport_pc 00:02: disabled
[ 1.272769] Floppy drive(s): fd0 is 1.44M
[ 4.282950] floppy0: no floppy controllers found
[ 4.285036] brd: module loaded
[ 4.286147] loop: module loaded
[ 4.286193] Compaq SMART2 Driver (v 2.6.0)
[ 4.286318] HP CISS Driver (v 3.6.20)
[ 4.286719] MM: desc_per_page = 128
[ 4.286785] tg3.c:v3.92.1 (June 9, 2008)
[ 4.286895] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.494624] eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:4b:58:56:fe
[ 4.494684] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 4.494733] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.494916] netconsole: local port 6665
[ 4.494977] netconsole: local IP 192.168.3.2
[ 4.495020] netconsole: interface eth0
[ 4.495063] netconsole: remote port 9999
[ 4.495112] netconsole: remote IP 192.168.3.1
[ 4.495156] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 4.495207] netconsole: device eth0 not up yet, forcing it
[ 7.730658] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 7.730706] tg3: eth0: Flow control is on for TX and on for RX.
[ 7.733936] console [netcon0] enabled
[ 7.757542] netconsole: network logging started
[ 7.757828] input: Macintosh mouse button emulation as /class/input/input3
[ 7.758238] Loading iSCSI transport class v2.0-870.
[ 7.759089] iscsi: registered transport (tcp)
[ 7.759512] Adaptec aacraid driver 1.1-5[2456]-ms
[ 7.759770] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 7.760234] QLogic Fibre Channel HBA Driver: 8.02.01-k4
[ 7.760470] iscsi: registered transport (qla4xxx)
[ 7.760602] QLogic iSCSI HBA Driver
[ 7.760655] Emulex LightPulse Fibre Channel SCSI driver 8.2.7
[ 7.760699] Copyright(c) 2004-2008 Emulex. All rights reserved.
[ 7.761099] DC390: clustering now enabled by default. If you get problems load
[ 7.761100] with "disable_clustering=1" and report to maintainers
[ 7.761384] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 7.761512] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 7.761647] megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
[ 7.761865] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 7.762274] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 7.762401] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
[ 7.762533] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
[ 7.762668] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
[ 7.762794] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 7.763015] st: Version 20080224, fixed bufsize 32768, s/g segs 256
[ 7.763133] Driver 'st' needs updating - please use bus_type methods
[ 7.763246] osst :I: Tape driver with OnStream support version 0.99.4
[ 7.763247] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 7.763420] Driver 'osst' needs updating - please use bus_type methods
[ 7.763601] Driver 'sd' needs updating - please use bus_type methods
[ 7.763710] Driver 'sr' needs updating - please use bus_type methods
[ 7.763967] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.764088] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 7.764216] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 7.764269] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part
[ 7.764515] scsi0 : ahci
[ 7.764819] scsi1 : ahci
[ 7.765051] scsi2 : ahci
[ 7.765228] scsi3 : ahci
[ 7.765418] ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16
[ 7.765477] ata2: DUMMY
[ 7.765520] ata3: DUMMY
[ 7.765591] ata4: DUMMY
[ 8.069918] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.070365] ata1.00: ATA-7: FUJITSU MHW2080BH PL, 891F, max UDMA/100
[ 8.070418] ata1.00: 156301488 sectors, multi 16: LBA48
[ 8.070474] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 8.071037] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 8.071083] ata1.00: configured for UDMA/100
[ 8.071219] isa bounce pool size: 16 pages
[ 8.071362] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 891F PQ: 0 ANSI: 5
[ 8.071661] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 8.071731] sd 0:0:0:0: [sda] Write Protect is off
[ 8.071813] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.071965] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 8.072034] sd 0:0:0:0: [sda] Write Protect is off
[ 8.072112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.072170] sda: sda1 sda2 < sda5 sda6 >
[ 8.188836] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.189035] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.190432] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 8.190673] scsi4 : pata_atiixp
[ 8.190930] scsi5 : pata_atiixp
[ 8.191697] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14
[ 8.191752] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15
[ 8.381400] ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH17, max MWDMA2
[ 8.422328] ata5.00: configured for MWDMA2
[ 8.579234] scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH17 PQ: 0 ANSI: 5
[ 8.608049] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.608112] Uniform CD-ROM driver Revision: 3.20
[ 8.608499] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 8.610885] I2O subsystem v1.325
[ 8.610943] i2o: max drivers = 8
[ 8.611228] I2O Configuration OSM v1.323
[ 8.611414] I2O Bus Adapter OSM v1.317
[ 8.611522] I2O Block Device OSM v1.325
[ 8.611853] I2O SCSI Peripheral OSM v1.316
[ 8.611969] I2O ProcFS OSM v1.316
[ 8.612088] Fusion MPT base driver 3.04.07
[ 8.612138] Copyright (c) 1999-2008 LSI Corporation
[ 8.612187] Fusion MPT SPI Host driver 3.04.07
[ 8.612364] Fusion MPT FC Host driver 3.04.07
[ 8.612506] Fusion MPT SAS Host driver 3.04.07
[ 8.612645] Fusion MPT misc device (ioctl) driver 3.04.07
[ 8.616236] mptctl: Registered with Fusion MPT base driver
[ 8.616282] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 8.616334] Fusion MPT LAN driver 3.04.07
[ 8.616868] vendor=1002 device=4384
[ 8.616919] ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 8.669435] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0101000-d01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 8.674041] usbcore: registered new interface driver usblp
[ 8.674099] Initializing USB Mass Storage driver...
[ 8.674218] usbcore: registered new interface driver usb-storage
[ 8.674268] USB Mass Storage support registered.
[ 8.674392] usbcore: registered new interface driver libusual
[ 8.674612] PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12
[ 8.676686] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 8.677477] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.677527] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 8.677578] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 8.677622] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 8.677674] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 8.686300] parkbd: no such parport
[ 8.689961] mice: PS/2 mouse device common for all mice
[ 8.702467] md: linear personality registered for level -1
[ 8.702516] md: raid0 personality registered for level 0
[ 8.702568] md: raid1 personality registered for level 1
[ 8.702612] md: raid10 personality registered for level 10
[ 8.718851] raid6: int64x1 1496 MB/s
[ 8.735862] raid6: int64x2 1902 MB/s
[ 8.752861] raid6: int64x4 1835 MB/s
[ 8.769860] raid6: int64x8 1648 MB/s
[ 8.786846] raid6: sse2x1 2085 MB/s
[ 8.803851] raid6: sse2x2 3011 MB/s
[ 8.820842] raid6: sse2x4 3101 MB/s
[ 8.820886] raid6: using algorithm sse2x4 (3101 MB/s)
[ 8.820938] md: raid6 personality registered for level 6
[ 8.820982] md: raid5 personality registered for level 5
[ 8.821033] md: raid4 personality registered for level 4
[ 8.821079] md: multipath personality registered for level -4
[ 8.821124] md: faulty personality registered for level -5
[ 8.821432] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
[ 8.822027] cpuidle: using governor ladder
[ 8.822586] cpuidle: using governor menu
[ 8.842646] input: AT Translated Set 2 keyboard as /class/input/input4
[ 8.847747] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.847947] usbcore: registered new interface driver hiddev
[ 8.848062] usbcore: registered new interface driver usbhid
[ 8.848114] usbhid: v2.6:USB HID core driver
[ 8.848915] TCP bic registered
[ 8.848970] NET: Registered protocol family 17
[ 8.849301] RPC: Registered udp transport module.
[ 8.849349] RPC: Registered tcp transport module.
[ 8.849410] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3600+ processors (1 cpu cores) (version 2.20.00)
[ 8.849541] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x10
[ 8.849592] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
[ 8.849638] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 8.849683] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18
[ 8.849765] powernow-k8: ph2 null fid transition 0xc
[ 8.850132] registered taskstats version 1
[ 8.850361] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 8.850465] Freeing unused kernel memory: 484k freed

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/