Re: kernel won't boot on a Cyrix MediaGXm (Geode )
From: Juergen Beisert
Date: Mon Jul 21 2008 - 02:29:19 EST
Samuel,
On Montag, 21. Juli 2008, Samuel Sieb wrote:
> I have a computer here with a CPU that the BIOS identifies as:
> Cyrix MediaGXm/Cx5530 Unicorn Revision 1.19.3B
>
> kernel 2.6.14 identifies it as:
> vendor_id : Geode by NSC
> cpu family : 5
> model : 9
> model name : Geode(TM) Integrated Processor by National Semi
> stepping : 1
>
> I can't boot any kernel later than 2.6.22 on it. Anything later either
> hangs or gives random kernel panics while booting. I tracked down the
> problem to a specific commit:
>
> commit f25f64ed5bd3c2932493681bdfdb483ea707da0a
> Author: Juergen Beisert <juergen@xxxxxxxxxxxxxx>
> Date: Sun Jul 22 11:12:38 2007 +0200
>
> x86: Replace NSC/Cyrix specific chipset access macros by inlined
> functions.
>
> Reversing the patch (compensating for kernel changes) let me boot a
> 2.6.25 kernel. I realize the patch is supposed to fix something that
> didn't work right, but I didn't have a problem before and I do now. :-)
Yes. My patch makes some chipset tweaks working as expected. Or at least it
makes them work. It seems nobody ever tested them before. Remove the
following line (or change it to meet your CPU clock frequency):
linux-2.6.25/arch/x86/kernel/cyrix.c, line 151. Disable this line or change
the value 0x04 according to the speed of your CPU. This tweak helps others
with random hangs of their system.
For this CX86_PCR0 register here some info from the datasheet:
/*
* Setup the chipset specific Performance Control Incrementer
*
* The Performance Control Incrementer seems to be a delay line to control
* data setup time for DRAM access or it controls its jitter. Its setting
* depends on CPU and DRAM clock (CPU and DRAM clock are coupled through a
* simple clock divider. For a 300 MHz CPU the divider is 3.0 to get a DRAM
* clock of 100MHz)
* There is an application note how to setup it:
* "AMD Geode GX1 Processor Memory Timings for Maximum Performance."
* Values for various CPUs:
* 1-0 for processor speed 200...266MHz
* 1-1 for processor speed 300 and 333MHz
*
* Note: If your system runs unstable after setting new values here,
* try with other values or leave the value as the BIOS setup it.
* The setting depends also on physical layout!
*/
Regards
Juergen
--
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Vertretung Sued/Muenchen, Germany
Phone: +49-8766-939 228 | Fax: +49-5121-206917-9
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/