Re: Add to_irq fields to gpiolib (with sample implementation)

[Ben Dooks]

On Mon, Jul 21, 2008 at 06:43:02PM +0800, Ramax Lo wrote:
> 2008/7/18 Ben Dooks <ben-linux@xxxxxxxxx>:
> > The two patches form a pair of patches to show
> > that we should consider adding an to_irq field
> > to the gpio_chip structure and gpiolib support.
> >
> 
> Indeed, it's necessary to add a new field to provide
> a general interface.
> 
> > The reason is that if we add support for devices
> > registering gpio to also register interrputs, then
> > a single arch-dependant interrupt mapping is not
> > going to be sufficient.
> >
> > Note, this set does not remove any clashing
> > definitions that may have of gpio_to_irq.
> >
> > ---
> > GPIO: Add generic gpio_to_irq call.
> >
> > Add gpio_to_irq() implementation allowing the
> > gpio_chip registration to also specify an function
> > to map GPIO offsets into IRQs.
> >
> > Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx>
> >
> > Index: linux-2.6.26-quilt3/drivers/gpio/gpiolib.c
> > ===================================================================
> > --- linux-2.6.26-quilt3.orig/drivers/gpio/gpiolib.c     2008-07-18 00:40:52.000000000 +0100
> > +++ linux-2.6.26-quilt3/drivers/gpio/gpiolib.c  2008-07-18 00:52:07.000000000 +0100
> > @@ -339,6 +339,36 @@ const char *gpiochip_is_requested(struct
> >  }
> >  EXPORT_SYMBOL_GPL(gpiochip_is_requested);
> >
> > +int gpio_to_irq(unsigned gpio)
> > +{
> > +       struct gpio_chip        *chip;
> > +       struct gpio_desc        *desc = &gpio_desc[gpio];
> > +       unsigned long           flags;
> > +       int                     status = -EINVAL;
> > +
> > +       spin_lock_irqsave(&gpio_lock, flags);
> > +
> > +       if (!gpio_is_valid(gpio))
> > +               goto fail;
> > +
> > +       chip = desc->chip;
> > +       if (!chip || !chip->to_irq)
> > +               goto fail;
> > +
> > +       gpio -= chip->base;
> > +       if (gpio >= chip->ngpio)
> > +               goto fail;
> > +
> > +       status = chip->to_irq(chip, gpio);
> > +
> > + fail:
> > +       spin_unlock_irqrestore(&gpio_lock, flags);
> > +       if (status)
> > +               pr_debug("%s: gpio-%d status %d\n",
> > +                       __func__, gpio, status);
> > +       return status;
> > +}
> > +EXPORT_SYMBOL_GPL(gpio_to_irq);
> >
> 
> Is it possible to define it as __gpio_to_irq(), and let people
> define their macro or inline function, like the case of
> __gpio_get_value(), to maintain compatibility?

Ok, should I resubmit with this changed?
 
> >  /* Drivers MUST set GPIO direction before making get/set calls.  In
> >  * some cases this is done in early boot, before IRQs are enabled.
> > Index: linux-2.6.26-quilt3/include/asm-generic/gpio.h
> > ===================================================================
> > --- linux-2.6.26-quilt3.orig/include/asm-generic/gpio.h 2008-07-18 00:40:52.000000000 +0100
> > +++ linux-2.6.26-quilt3/include/asm-generic/gpio.h      2008-07-18 00:46:32.000000000 +0100
> > @@ -40,6 +40,7 @@ struct module;
> >  * @dbg_show: optional routine to show contents in debugfs; default code
> >  *     will be used when this is omitted, but custom code can show extra
> >  *     state (such as pullup/pulldown configuration).
> > + * @to_irq: convert gpio offset to IRQ number.
> >  * @base: identifies the first GPIO number handled by this chip; or, if
> >  *     negative during registration, requests dynamic ID allocation.
> >  * @ngpio: the number of GPIOs handled by this controller; the last GPIO
> > @@ -71,6 +72,9 @@ struct gpio_chip {
> >                                                unsigned offset, int value);
> >        void                    (*dbg_show)(struct seq_file *s,
> >                                                struct gpio_chip *chip);
> > +       int                     (*to_irq)(struct gpio_chip *chip,
> > +                                         unsigned offset);
> > +
> >        int                     base;
> >        u16                     ngpio;
> >        unsigned                can_sleep:1;
> > @@ -97,6 +101,7 @@ extern int gpio_direction_output(unsigne
> >  extern int gpio_get_value_cansleep(unsigned gpio);
> >  extern void gpio_set_value_cansleep(unsigned gpio, int value);
> >
> > +extern int gpio_to_irq(unsigned gpio);
> >
> >  /* A platform's <asm/gpio.h> code may want to inline the I/O calls when
> >  * the GPIO is constant and refers to some always-present controller,
> >
> >
> > S3C24XX: Add gpio_to_irq implementation
> >
> > Add the necessary to_irq fields for the S3C24XX
> > GPIO banks that support IRQs.
> >
> > Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx>
> >
> > Index: linux-2.6.26-quilt3/arch/arm/plat-s3c24xx/gpiolib.c
> > ===================================================================
> > --- linux-2.6.26-quilt3.orig/arch/arm/plat-s3c24xx/gpiolib.c    2008-07-18 12:35:15.000000000 +0100
> > +++ linux-2.6.26-quilt3/arch/arm/plat-s3c24xx/gpiolib.c 2008-07-18 12:37:39.000000000 +0100
> > @@ -150,6 +150,19 @@ static int s3c24xx_gpiolib_banka_output(
> >        return 0;
> >  }
> >
> > +static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
> > +{
> > +       if (offset < 4)
> > +               return IRQ_EINT0 + offset;
> > +
> > +       return IRQ_EINT4 + (offset - 4);
> > +}
> > +
> > +static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
> > +{
> > +       return IRQ_EINT8 + offset;
> > +}
> > +
> >
> >  struct s3c24xx_gpio_chip gpios[] = {
> >        [0] = {
> > @@ -228,6 +241,7 @@ struct s3c24xx_gpio_chip gpios[] = {
> >                        .direction_output       = s3c24xx_gpiolib_output,
> >                        .set                    = s3c24xx_gpiolib_set,
> >                        .get                    = s3c24xx_gpiolib_get,
> > +                       .to_irq                 = s3c24xx_gpiolib_bankf_toirq,
> >                },
> >        },
> >        [6] = {
> > @@ -241,6 +255,7 @@ struct s3c24xx_gpio_chip gpios[] = {
> >                        .direction_output       = s3c24xx_gpiolib_output,
> >                        .set                    = s3c24xx_gpiolib_set,
> >                        .get                    = s3c24xx_gpiolib_get,
> > +                       .to_irq                 = s3c24xx_gpiolib_bankg_toirq,
> >                },
> >        },
> >  };
> >
> >
> > --
> > Ben (ben@xxxxxxxxx, http://www.fluff.org/)
> >
> >  'a smiley only costs 4 bytes'
> >
> > -------------------------------------------------------------------
> > List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
> > FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
> > Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php
> >
> 
> -------------------------------------------------------------------
> List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
> FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
> Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/