Re: Current Git: BUG: unable to handle kernel paging request at 0000000001a40ca0

[Dieter Ries]

Vegard Nossum schrieb:
> On Wed, Jul 23, 2008 at 11:53 PM, Dieter Ries <clip3@xxxxxx> wrote:
> > > > Dieter: If this is reproducible, it would probably help quite a bit to
> > > > configure the kernel with CONFIG_SLUB_DEBUG and boot with
> > > > slub_debug=FZPUT (unless you already have CONFIG_SLUB_DEBUG_ON set, in
> > > > which case you are already running with the SLUB debugging at boot).
> > > > It might catch the corruption before it becomes fatal, or give us some
> > > > more clues anyway.
> > I tried to bisect the bug, which failed because there were too many kernels
> > not booting with other problems, I guess bisecting just fails in the merge
> > window.
> >
> > With CONFIG_SLUB_DEBUG_ON the output looks different, unfortunately
> > netconsole stops before those are transmitted.

I think I managed to catch one of those:


general protection fault: 0000 [1] SMP
CPU 0
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.26-06373-gcaf076e #49
RIP: 0010:[<ffffffff805e08f9>]  [<ffffffff805e08f9>] 
nf_nat_move_storage+0x21/0x7a
RSP: 0018:ffffffff8091ab80  EFLAGS: 00010206
RAX: ffffffff805e08d8 RBX: ffff88007d1fb948 RCX: 000000000000006b
RDX: ffff88007d175e10 RSI: ffff88007d175e7b RDI: ffff88007d1fb948
RBP: ffffffff8091aba0 R08: 0000000000000000 R09: ffff88007d175e90
R10: ffffe20000000008 R11: ffff88007d175e10 R12: 59d2c3ffff88007d
R13: ffff88007d175e7b R14: 00000000000000a0 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffffffff8089ee80(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffffffff808b0000, task ffffffff80842340)
Stack:  0000000000000002 ffff88007d3d2000 ffff88007d1fb948 0000000000000070
 ffffffff8091abf0 ffffffff8059d3c4 ffffffff8091ac40 0000000100000001
 ffffffff809e3658 ffff88007d3d2000 0000000000000002 ffff88007f9f6500
Call Trace:
 <IRQ>  [<ffffffff8059d3c4>] __nf_ct_ext_add+0x15f/0x1f7
 [<ffffffff805e762c>] nf_nat_fn+0x84/0x152
 [<ffffffff805e77d8>] nf_nat_in+0x2f/0x71
 [<ffffffff805953d8>] nf_iterate+0x48/0x85
 [<ffffffff805b19c0>] ? ip_rcv_finish+0x0/0x35d
 [<ffffffff80595478>] nf_hook_slow+0x63/0xcb
 [<ffffffff805b19c0>] ? ip_rcv_finish+0x0/0x35d
 [<ffffffff8028fe7c>] ? __slab_alloc+0x413/0x4bd
 [<ffffffff805b21b8>] ip_rcv+0x257/0x297
 [<ffffffff80581461>] netif_receive_skb+0x1f1/0x263
 [<ffffffff80495b34>] e1000_receive_skb+0x46/0x5d
 [<ffffffff8049830b>] e1000_clean_rx_irq+0x20e/0x2a6
 [<ffffffff8024cce8>] ? getnstimeofday+0x3f/0xa0
 [<ffffffff804952ce>] e1000_clean+0x6d/0x218
 [<ffffffff8024ad39>] ? hrtimer_get_next_event+0xa8/0xb8
 [<ffffffff80583569>] net_rx_action+0xa9/0x17c
 [<ffffffff80239b51>] __do_softirq+0x65/0xd5
 [<ffffffff8020c5dc>] call_softirq+0x1c/0x28
 [<ffffffff8020dd0a>] do_softirq+0x39/0x77
 [<ffffffff80239aab>] irq_exit+0x44/0x85
 [<ffffffff8020dff5>] do_IRQ+0x147/0x16a
 [<ffffffff8020b8a1>] ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff80446d94>] ? acpi_idle_enter_bm+0x2a7/0x317
 [<ffffffff80446d8a>] ? acpi_idle_enter_bm+0x29d/0x317
 [<ffffffff805672cd>] ? menu_select+0x75/0x9e
 [<ffffffff8056660e>] ? cpuidle_idle_call+0x75/0xa7
 [<ffffffff80209fd6>] ? cpu_idle+0x69/0x8c
 [<ffffffff8064d9ed>] ? rest_init+0x61/0x63
 [<ffffffff808bcd9c>] ? start_kernel+0x2ad/0x2b9
 [<ffffffff808bc275>] ? x86_64_start_reservations+0x84/0x88
 [<ffffffff808bc385>] ? x86_64_start_kernel+0xe4/0xeb


Code: ff 5b 41 5c 41 5d 41 5e c9 c3 55 48 89 e5 41 55 41 54 53 48 83 ec 
08 e8 c6 a8 c2 ff 4c 8b 66 20 48 89 fb 49 89 f5 4d 85 e4 74 51 <49> f7 
44 24 78 80 01 00 00 74 46 48 c7 c7 78 6a 9e 80 e8 8f 2e
RIP  [<ffffffff805e08f9>] nf_nat_move_storage+0x21/0x7a
 RSP <ffffffff8091ab80>
---[ end trace 6f6148e13aab302e ]---
Kernel panic - not syncing: Aiee, killing interrupt handler!

> > As there are always some lines about e1000 in the backtraces, I tried to
> > boot without LAN cable connected, and it worked, and crashed afterwards when
> > I plugged the cable in, with a bug in net/core/dev.c.
> >
> > Should I copy the messages with CONFIG_SLUB_DEBUG_ON by hand, or are just
> > some parts important?
>
> There were some e1000 patches in flight on LKML recently; you might be
> able to find them and see if it helps you. It also seems that some
> changes were just committed to -git, so I guess you should try the
> very latest from there.

I reverted some of the last patches concerning e1000 one by one, but the 
last ~12 which I did revert yet didnt solve the problem.

> You also Cced netdev from the start, so somebody from there should be
> able to help you more from here than I. :-)
>
>
> Vegard
cu
Dieter

--
3rd Law of Computing:
        Anything that can go wr
fortune: Segmentation violation -- Core dumped
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/