Re: do_IRQ: 0.83/0.84 No irq handler for vector

[Nikos Chantziaras]

Nikos Chantziaras wrote:
> Kernel 2.6.26 (on x86-64) gives "do_IRQ: 0.83 No irq handler for vector" 
> (and "do_IRQ: 0.83", but less often) warnings periodically.

I changed the kernel config:

  - CONFIG_PCI_MSI=y
  + # CONFIG_PCI_MSI is not set

In other words I disabled Message Signaled Interrupt support.  Now 
instead of "do_IRQ: 0.83 No irq handler for vector" I get:

  +------ PCI-Express Device Error ------+
  Error Severity          : Uncorrected (Non-Fatal)
  PCIE Bus Error type     : Transaction Layer
  Flow Control Protocol   : First
  Receiver ID             : 0010
  VendorID=1106h, DeviceID=a208h, Bus=00h, Device=02h, Function=00h
  Broadcast error_detected message
  Broadcast mmio_enabled message
  Broadcast resume message
  AER driver successfully recovered

(Repeated as many times as the "do_IRQ" message previously.)

In case someone needs it, this is my complete dmesg:

  http://realnc.pastebin.com/d6534029

and this is the kernel configuration: 
http://bugs.freedesktop.org/attachment.cgi?id=17912

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/