[PATCH] Remove broken hfcmulti driver.

From: David Woodhouse
Date: Wed Jul 30 2008 - 05:28:24 EST

Next message: Peter Oruba: "Re: [patch 0/4] x86: AMD microcode patch loading v2 fixes"
Previous message: Andrew Morton: "Re: BUG: unable to handle kernel NULL pointer dereference at00000002"
Next in thread: Karsten Keil: "Re: [PATCH] Remove broken hfcmulti driver."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The new hfcmulti driver is broken:

#ifdef __BIG_ENDIAN
#error "not running on big endian machines now"
#endif

I did look briefly at the possibility of marking it in Kconfig as
'depends on BROKEN || CPU_LITTLE_ENDIAN', but we don't actually have the
endianness config options defined in the general case. We could add them
(Al had patches once) but quite frankly, this driver in its current form
should just die regardless of endianness.

Even on little-endian machines it's doing rather dodgy things, using
symbol_get() for functions in some external module (ztdummy) and then
calling that function every 125Âs -- with a lovely comment:
/* TODO: REPLACE !!!! 125 us Interrupts are not acceptable */

Let's remove it until it's ready to be merged, and has actually been
reviewed.

Signed-off-by: David Woodhouse <David.Woodhouse@xxxxxxxxx>

diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index 1479348..f62dc87 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -11,15 +11,3 @@ config MISDN_HFCPCI
Enable support for cards with Cologne Chip AG's
HFC PCI chip.

-config MISDN_HFCMULTI
- tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
- depends on PCI
- depends on MISDN
- help
- Enable support for cards with Cologne Chip AG's HFC multiport
- chip. There are three types of chips that are quite similar,
- but the interface is different:
- * HFC-4S (4 S/T interfaces on one chip)
- * HFC-8S (8 S/T interfaces on one chip)
- * HFC-E1 (E1 interface for 2Mbit ISDN)
-
diff --git a/drivers/isdn/hardware/mISDN/Makefile b/drivers/isdn/hardware/mISDN/Makefile
index 1e7ca53..6f20a40 100644
--- a/drivers/isdn/hardware/mISDN/Makefile
+++ b/drivers/isdn/hardware/mISDN/Makefile
@@ -4,4 +4,3 @@
#

obj-$(CONFIG_MISDN_HFCPCI) += hfcpci.o
-obj-$(CONFIG_MISDN_HFCMULTI) += hfcmulti.o
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
deleted file mode 100644
index 2649ea5..0000000
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ /dev/null
@@ -1,5320 +0,0 @@
-/*
- * hfcmulti.c low level driver for hfc-4s/hfc-8s/hfc-e1 based cards
- *
- * Author Andreas Eversberg (jolly@xxxxxxxxxxxx)
- * ported to mqueue mechanism:
- * Peter Sprenger (sprengermoving-bytes.de)
- *
- * inspired by existing hfc-pci driver:
- * Copyright 1999 by Werner Cornelius (werner@xxxxxxxxxxxxxxxxxxx)
- * Copyright 2008 by Karsten Keil (kkeil@xxxxxxx)
- * Copyright 2008 by Andreas Eversberg (jolly@xxxxxxxxxxxx)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Thanks to Cologne Chip AG for this great controller!
- */
-
-/*
- * module parameters:
- * type:
- * By default (0), the card is automatically detected.
- * Or use the following combinations:
- * Bit 0-7 = 0x00001 = HFC-E1 (1 port)
- * or Bit 0-7 = 0x00004 = HFC-4S (4 ports)
- * or Bit 0-7 = 0x00008 = HFC-8S (8 ports)
- * Bit 8 = 0x00100 = uLaw (instead of aLaw)
- * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware
- * Bit 10 = spare
- * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
- * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
- * Bit 13 = spare
- * Bit 14 = 0x04000 = Use external ram (128K)
- * Bit 15 = 0x08000 = Use external ram (512K)
- * Bit 16 = 0x10000 = Use 64 timeslots instead of 32
- * or Bit 17 = 0x20000 = Use 128 timeslots instead of anything else
- * Bit 18 = spare
- * Bit 19 = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog)
- * (all other bits are reserved and shall be 0)
- * example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM
- * bus (PCM master)
- *
- * port: (optional or required for all ports on all installed cards)
- * HFC-4S/HFC-8S only bits:
- * Bit 0 = 0x001 = Use master clock for this S/T interface
- * (ony once per chip).
- * Bit 1 = 0x002 = transmitter line setup (non capacitive mode)
- * Don't use this unless you know what you are doing!
- * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing)
- * example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock
- * received from port 1
- *
- * HFC-E1 only bits:
- * Bit 0 = 0x0001 = interface: 0=copper, 1=optical
- * Bit 1 = 0x0002 = reserved (later for 32 B-channels transparent mode)
- * Bit 2 = 0x0004 = Report LOS
- * Bit 3 = 0x0008 = Report AIS
- * Bit 4 = 0x0010 = Report SLIP
- * Bit 5 = 0x0020 = Report RDI
- * Bit 8 = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame
- * mode instead.
- * Bit 9 = 0x0200 = Force get clock from interface, even in NT mode.
- * or Bit 10 = 0x0400 = Force put clock to interface, even in TE mode.
- * Bit 11 = 0x0800 = Use direct RX clock for PCM sync rather than PLL.
- * (E1 only)
- * Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0
- * for default.
- * (all other bits are reserved and shall be 0)
- *
- * debug:
- * NOTE: only one debug value must be given for all cards
- * enable debugging (see hfc_multi.h for debug options)
- *
- * poll:
- * NOTE: only one poll value must be given for all cards
- * Give the number of samples for each fifo process.
- * By default 128 is used. Decrease to reduce delay, increase to
- * reduce cpu load. If unsure, don't mess with it!
- * Valid is 8, 16, 32, 64, 128, 256.
- *
- * pcm:
- * NOTE: only one pcm value must be given for every card.
- * The PCM bus id tells the mISDNdsp module about the connected PCM bus.
- * By default (0), the PCM bus id is 100 for the card that is PCM master.
- * If multiple cards are PCM master (because they are not interconnected),
- * each card with PCM master will have increasing PCM id.
- * All PCM busses with the same ID are expected to be connected and have
- * common time slots slots.
- * Only one chip of the PCM bus must be master, the others slave.
- * -1 means no support of PCM bus not even.
- * Omit this value, if all cards are interconnected or none is connected.
- * If unsure, don't give this parameter.
- *
- * dslot:
- * NOTE: only one poll value must be given for every card.
- * Also this value must be given for non-E1 cards. If omitted, the E1
- * card has D-channel on time slot 16, which is default.
- * If 1..15 or 17..31, an alternate time slot is used for D-channel.
- * In this case, the application must be able to handle this.
- * If -1 is given, the D-channel is disabled and all 31 slots can be used
- * for B-channel. (only for specific applications)
- * If you don't know how to use it, you don't need it!
- *
- * iomode:
- * NOTE: only one mode value must be given for every card.
- * -> See hfc_multi.h for HFC_IO_MODE_* values
- * By default, the IO mode is pci memory IO (MEMIO).
- * Some cards requre specific IO mode, so it cannot be changed.
- * It may be usefull to set IO mode to register io (REGIO) to solve
- * PCI bridge problems.
- * If unsure, don't give this parameter.
- *
- * clockdelay_nt:
- * NOTE: only one clockdelay_nt value must be given once for all cards.
- * Give the value of the clock control register (A_ST_CLK_DLY)
- * of the S/T interfaces in NT mode.
- * This register is needed for the TBR3 certification, so don't change it.
- *
- * clockdelay_te:
- * NOTE: only one clockdelay_te value must be given once
- * Give the value of the clock control register (A_ST_CLK_DLY)
- * of the S/T interfaces in TE mode.
- * This register is needed for the TBR3 certification, so don't change it.
- */
-
-/*
- * debug register access (never use this, it will flood your system log)
- * #define HFC_REGISTER_DEBUG
- */
-
-static const char *hfcmulti_revision = "2.00";
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/mISDNhw.h>
-#include <linux/mISDNdsp.h>
-
-/*
-#define IRQCOUNT_DEBUG
-#define IRQ_DEBUG
-*/
-
-#include "hfc_multi.h"
-#ifdef ECHOPREP
-#include "gaintab.h"
-#endif
-
-#define MAX_CARDS 8
-#define MAX_PORTS (8 * MAX_CARDS)
-
-static LIST_HEAD(HFClist);
-static spinlock_t HFClock; /* global hfc list lock */
-
-static void ph_state_change(struct dchannel *);
-static void (*hfc_interrupt)(void);
-static void (*register_interrupt)(void);
-static int (*unregister_interrupt)(void);
-static int interrupt_registered;
-
-static struct hfc_multi *syncmaster;
-int plxsd_master; /* if we have a master card (yet) */
-static spinlock_t plx_lock; /* may not acquire other lock inside */
-EXPORT_SYMBOL(plx_lock);
-
-#define TYP_E1 1
-#define TYP_4S 4
-#define TYP_8S 8
-
-static int poll_timer = 6; /* default = 128 samples = 16ms */
-/* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */
-static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30 };
-#define CLKDEL_TE 0x0f /* CLKDEL in TE mode */
-#define CLKDEL_NT 0x6c /* CLKDEL in NT mode
- (0x60 MUST be included!) */
-static u_char silence = 0xff; /* silence by LAW */
-
-#define DIP_4S 0x1 /* DIP Switches for Beronet 1S/2S/4S cards */
-#define DIP_8S 0x2 /* DIP Switches for Beronet 8S+ cards */
-#define DIP_E1 0x3 /* DIP Switches for Beronet E1 cards */
-
-/*
- * module stuff
- */
-
-static uint type[MAX_CARDS];
-static uint pcm[MAX_CARDS];
-static uint dslot[MAX_CARDS];
-static uint iomode[MAX_CARDS];
-static uint port[MAX_PORTS];
-static uint debug;
-static uint poll;
-static uint timer;
-static uint clockdelay_te = CLKDEL_TE;
-static uint clockdelay_nt = CLKDEL_NT;
-
-static int HFC_cnt, Port_cnt, PCM_cnt = 99;
-
-MODULE_AUTHOR("Andreas Eversberg");
-MODULE_LICENSE("GPL");
-module_param(debug, uint, S_IRUGO | S_IWUSR);
-module_param(poll, uint, S_IRUGO | S_IWUSR);
-module_param(timer, uint, S_IRUGO | S_IWUSR);
-module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
-module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
-module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
-module_param_array(pcm, uint, NULL, S_IRUGO | S_IWUSR);
-module_param_array(dslot, uint, NULL, S_IRUGO | S_IWUSR);
-module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
-module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
-
-#ifdef HFC_REGISTER_DEBUG
-#define HFC_outb(hc, reg, val) \
- (hc->HFC_outb(hc, reg, val, __func__, __LINE__))
-#define HFC_outb_nodebug(hc, reg, val) \
- (hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__))
-#define HFC_inb(hc, reg) \
- (hc->HFC_inb(hc, reg, __func__, __LINE__))
-#define HFC_inb_nodebug(hc, reg) \
- (hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__))
-#define HFC_inw(hc, reg) \
- (hc->HFC_inw(hc, reg, __func__, __LINE__))
-#define HFC_inw_nodebug(hc, reg) \
- (hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__))
-#define HFC_wait(hc) \
- (hc->HFC_wait(hc, __func__, __LINE__))
-#define HFC_wait_nodebug(hc) \
- (hc->HFC_wait_nodebug(hc, __func__, __LINE__))
-#else
-#define HFC_outb(hc, reg, val) (hc->HFC_outb(hc, reg, val))
-#define HFC_outb_nodebug(hc, reg, val) (hc->HFC_outb_nodebug(hc, reg, val))
-#define HFC_inb(hc, reg) (hc->HFC_inb(hc, reg))
-#define HFC_inb_nodebug(hc, reg) (hc->HFC_inb_nodebug(hc, reg))
-#define HFC_inw(hc, reg) (hc->HFC_inw(hc, reg))
-#define HFC_inw_nodebug(hc, reg) (hc->HFC_inw_nodebug(hc, reg))
-#define HFC_wait(hc) (hc->HFC_wait(hc))
-#define HFC_wait_nodebug(hc) (hc->HFC_wait_nodebug(hc))
-#endif
-
-/* HFC_IO_MODE_PCIMEM */
-static void
-#ifdef HFC_REGISTER_DEBUG
-HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
- const char *function, int line)
-#else
-HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
-#endif
-{
- writeb(val, (hc->pci_membase)+reg);
-}
-static u_char
-#ifdef HFC_REGISTER_DEBUG
-HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
-#else
-HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
-#endif
-{
- return readb((hc->pci_membase)+reg);
-}
-static u_short
-#ifdef HFC_REGISTER_DEBUG
-HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
-#else
-HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
-#endif
-{
- return readw((hc->pci_membase)+reg);
-}
-static void
-#ifdef HFC_REGISTER_DEBUG
-HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
-#else
-HFC_wait_pcimem(struct hfc_multi *hc)
-#endif
-{
- while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
-}
-
-/* HFC_IO_MODE_REGIO */
-static void
-#ifdef HFC_REGISTER_DEBUG
-HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
- const char *function, int line)
-#else
-HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
-#endif
-{
- outb(reg, (hc->pci_iobase)+4);
- outb(val, hc->pci_iobase);
-}
-static u_char
-#ifdef HFC_REGISTER_DEBUG
-HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
-#else
-HFC_inb_regio(struct hfc_multi *hc, u_char reg)
-#endif
-{
- outb(reg, (hc->pci_iobase)+4);
- return inb(hc->pci_iobase);
-}
-static u_short
-#ifdef HFC_REGISTER_DEBUG
-HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
-#else
-HFC_inw_regio(struct hfc_multi *hc, u_char reg)
-#endif
-{
- outb(reg, (hc->pci_iobase)+4);
- return inw(hc->pci_iobase);
-}
-static void
-#ifdef HFC_REGISTER_DEBUG
-HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
-#else
-HFC_wait_regio(struct hfc_multi *hc)
-#endif
-{
- outb(R_STATUS, (hc->pci_iobase)+4);
- while (inb(hc->pci_iobase) & V_BUSY);
-}
-
-#ifdef HFC_REGISTER_DEBUG
-static void
-HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
- const char *function, int line)
-{
- char regname[256] = "", bits[9] = "xxxxxxxx";
- int i;
-
- i = -1;
- while (hfc_register_names[++i].name) {
- if (hfc_register_names[i].reg == reg)
- strcat(regname, hfc_register_names[i].name);
- }
- if (regname[0] == '\0')
- strcpy(regname, "register");
-
- bits[7] = '0'+(!!(val&1));
- bits[6] = '0'+(!!(val&2));
- bits[5] = '0'+(!!(val&4));
- bits[4] = '0'+(!!(val&8));
- bits[3] = '0'+(!!(val&16));
- bits[2] = '0'+(!!(val&32));
- bits[1] = '0'+(!!(val&64));
- bits[0] = '0'+(!!(val&128));
- printk(KERN_DEBUG
- "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
- hc->id, reg, regname, val, bits, function, line);
- HFC_outb_nodebug(hc, reg, val);
-}
-static u_char
-HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
-{
- char regname[256] = "", bits[9] = "xxxxxxxx";
- u_char val = HFC_inb_nodebug(hc, reg);
- int i;
-
- i = 0;
- while (hfc_register_names[i++].name)
- ;
- while (hfc_register_names[++i].name) {
- if (hfc_register_names[i].reg == reg)
- strcat(regname, hfc_register_names[i].name);
- }
- if (regname[0] == '\0')
- strcpy(regname, "register");
-
- bits[7] = '0'+(!!(val&1));
- bits[6] = '0'+(!!(val&2));
- bits[5] = '0'+(!!(val&4));
- bits[4] = '0'+(!!(val&8));
- bits[3] = '0'+(!!(val&16));
- bits[2] = '0'+(!!(val&32));
- bits[1] = '0'+(!!(val&64));
- bits[0] = '0'+(!!(val&128));
- printk(KERN_DEBUG
- "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
- hc->id, reg, regname, val, bits, function, line);
- return val;
-}
-static u_short
-HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
-{
- char regname[256] = "";
- u_short val = HFC_inw_nodebug(hc, reg);
- int i;
-
- i = 0;
- while (hfc_register_names[i++].name)
- ;
- while (hfc_register_names[++i].name) {
- if (hfc_register_names[i].reg == reg)
- strcat(regname, hfc_register_names[i].name);
- }
- if (regname[0] == '\0')
- strcpy(regname, "register");
-
- printk(KERN_DEBUG
- "HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n",
- hc->id, reg, regname, val, function, line);
- return val;
-}
-static void
-HFC_wait_debug(struct hfc_multi *hc, const char *function, int line)
-{
- printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n",
- hc->id, function, line);
- HFC_wait_nodebug(hc);
-}
-#endif
-
-/* write fifo data (REGIO) */
-void
-write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
-{
- outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
- while (len>>2) {
- outl(*(u32 *)data, hc->pci_iobase);
- data += 4;
- len -= 4;
- }
- while (len>>1) {
- outw(*(u16 *)data, hc->pci_iobase);
- data += 2;
- len -= 2;
- }
- while (len) {
- outb(*data, hc->pci_iobase);
- data++;
- len--;
- }
-}
-/* write fifo data (PCIMEM) */
-void
-write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
-{
- while (len>>2) {
- writel(*(u32 *)data, (hc->pci_membase)+A_FIFO_DATA0);
- data += 4;
- len -= 4;
- }
- while (len>>1) {
- writew(*(u16 *)data, (hc->pci_membase)+A_FIFO_DATA0);
- data += 2;
- len -= 2;
- }
- while (len) {
- writeb(*data, (hc->pci_membase)+A_FIFO_DATA0);
- data++;
- len--;
- }
-}
-/* read fifo data (REGIO) */
-void
-read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
-{
- outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
- while (len>>2) {
- *(u32 *)data = inl(hc->pci_iobase);
- data += 4;
- len -= 4;
- }
- while (len>>1) {
- *(u16 *)data = inw(hc->pci_iobase);
- data += 2;
- len -= 2;
- }
- while (len) {
- *data = inb(hc->pci_iobase);
- data++;
- len--;
- }
-}
-
-/* read fifo data (PCIMEM) */
-void
-read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
-{
- while (len>>2) {
- *(u32 *)data =
- readl((hc->pci_membase)+A_FIFO_DATA0);
- data += 4;
- len -= 4;
- }
- while (len>>1) {
- *(u16 *)data =
- readw((hc->pci_membase)+A_FIFO_DATA0);
- data += 2;
- len -= 2;
- }
- while (len) {
- *data = readb((hc->pci_membase)+A_FIFO_DATA0);
- data++;
- len--;
- }
-}
-
-
-static void
-enable_hwirq(struct hfc_multi *hc)
-{
- hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN;
- HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
-}
-
-static void
-disable_hwirq(struct hfc_multi *hc)
-{
- hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN);
- HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
-}
-
-#define NUM_EC 2
-#define MAX_TDM_CHAN 32
-
-
-inline void
-enablepcibridge(struct hfc_multi *c)
-{
- HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */
-}
-
-inline void
-disablepcibridge(struct hfc_multi *c)
-{
- HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */
-}
-
-inline unsigned char
-readpcibridge(struct hfc_multi *hc, unsigned char address)
-{
- unsigned short cipv;
- unsigned char data;
-
- if (!hc->pci_iobase)
- return 0;
-
- /* slow down a PCI read access by 1 PCI clock cycle */
- HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/
-
- if (address == 0)
- cipv = 0x4000;
- else
- cipv = 0x5800;
-
- /* select local bridge port address by writing to CIP port */
- /* data = HFC_inb(c, cipv); * was _io before */
- outw(cipv, hc->pci_iobase + 4);
- data = inb(hc->pci_iobase);
-
- /* restore R_CTRL for normal PCI read cycle speed */
- HFC_outb(hc, R_CTRL, 0x0); /* was _io before */
-
- return data;
-}
-
-inline void
-writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
-{
- unsigned short cipv;
- unsigned int datav;
-
- if (!hc->pci_iobase)
- return;
-
- if (address == 0)
- cipv = 0x4000;
- else
- cipv = 0x5800;
-
- /* select local bridge port address by writing to CIP port */
- outw(cipv, hc->pci_iobase + 4);
- /* define a 32 bit dword with 4 identical bytes for write sequence */
- datav = data | ((__u32) data << 8) | ((__u32) data << 16) |
- ((__u32) data << 24);
-
- /*
- * write this 32 bit dword to the bridge data port
- * this will initiate a write sequence of up to 4 writes to the same
- * address on the local bus interface the number of write accesses
- * is undefined but >=1 and depends on the next PCI transaction
- * during write sequence on the local bus
- */
- outl(datav, hc->pci_iobase);
-}
-
-inline void
-cpld_set_reg(struct hfc_multi *hc, unsigned char reg)
-{
- /* Do data pin read low byte */
- HFC_outb(hc, R_GPIO_OUT1, reg);
-}
-
-inline void
-cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
-{
- cpld_set_reg(hc, reg);
-
- enablepcibridge(hc);
- writepcibridge(hc, 1, val);
- disablepcibridge(hc);
-
- return;
-}
-
-inline unsigned char
-cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
-{
- unsigned char bytein;
-
- cpld_set_reg(hc, reg);
-
- /* Do data pin read low byte */
- HFC_outb(hc, R_GPIO_OUT1, reg);
-
- enablepcibridge(hc);
- bytein = readpcibridge(hc, 1);
- disablepcibridge(hc);
-
- return bytein;
-}
-
-inline void
-vpm_write_address(struct hfc_multi *hc, unsigned short addr)
-{
- cpld_write_reg(hc, 0, 0xff & addr);
- cpld_write_reg(hc, 1, 0x01 & (addr >> 8));
-}
-
-inline unsigned short
-vpm_read_address(struct hfc_multi *c)
-{
- unsigned short addr;
- unsigned short highbit;
-
- addr = cpld_read_reg(c, 0);
- highbit = cpld_read_reg(c, 1);
-
- addr = addr | (highbit << 8);
-
- return addr & 0x1ff;
-}
-
-inline unsigned char
-vpm_in(struct hfc_multi *c, int which, unsigned short addr)
-{
- unsigned char res;
-
- vpm_write_address(c, addr);
-
- if (!which)
- cpld_set_reg(c, 2);
- else
- cpld_set_reg(c, 3);
-
- enablepcibridge(c);
- res = readpcibridge(c, 1);
- disablepcibridge(c);
-
- cpld_set_reg(c, 0);
-
- return res;
-}
-
-inline void
-vpm_out(struct hfc_multi *c, int which, unsigned short addr,
- unsigned char data)
-{
- vpm_write_address(c, addr);
-
- enablepcibridge(c);
-
- if (!which)
- cpld_set_reg(c, 2);
- else
- cpld_set_reg(c, 3);
-
- writepcibridge(c, 1, data);
-
- cpld_set_reg(c, 0);
-
- disablepcibridge(c);
-
- {
- unsigned char regin;
- regin = vpm_in(c, which, addr);
- if (regin != data)
- printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back "
- "0x%x\n", data, addr, regin);
- }
-
-}
-
-
-void
-vpm_init(struct hfc_multi *wc)
-{
- unsigned char reg;
- unsigned int mask;
- unsigned int i, x, y;
- unsigned int ver;
-
- for (x = 0; x < NUM_EC; x++) {
- /* Setup GPIO's */
- if (!x) {
- ver = vpm_in(wc, x, 0x1a0);
- printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver);
- }
-
- for (y = 0; y < 4; y++) {
- vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */
- vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */
- vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */
- }
-
- /* Setup TDM path - sets fsync and tdm_clk as inputs */
- reg = vpm_in(wc, x, 0x1a3); /* misc_con */
- vpm_out(wc, x, 0x1a3, reg & ~2);
-
- /* Setup Echo length (256 taps) */
- vpm_out(wc, x, 0x022, 1);
- vpm_out(wc, x, 0x023, 0xff);
-
- /* Setup timeslots */
- vpm_out(wc, x, 0x02f, 0x00);
- mask = 0x02020202 << (x * 4);
-
- /* Setup the tdm channel masks for all chips */
- for (i = 0; i < 4; i++)
- vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff);
-
- /* Setup convergence rate */
- printk(KERN_DEBUG "VPM: A-law mode\n");
- reg = 0x00 | 0x10 | 0x01;
- vpm_out(wc, x, 0x20, reg);
- printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg);
- /*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */
-
- vpm_out(wc, x, 0x24, 0x02);
- reg = vpm_in(wc, x, 0x24);
- printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg);
-
- /* Initialize echo cans */
- for (i = 0; i < MAX_TDM_CHAN; i++) {
- if (mask & (0x00000001 << i))
- vpm_out(wc, x, i, 0x00);
- }
-
- /*
- * ARM arch at least disallows a udelay of
- * more than 2ms... it gives a fake "__bad_udelay"
- * reference at link-time.
- * long delays in kernel code are pretty sucky anyway
- * for now work around it using 5 x 2ms instead of 1 x 10ms
- */
-
- udelay(2000);
- udelay(2000);
- udelay(2000);
- udelay(2000);
- udelay(2000);
-
- /* Put in bypass mode */
- for (i = 0; i < MAX_TDM_CHAN; i++) {
- if (mask & (0x00000001 << i))
- vpm_out(wc, x, i, 0x01);
- }
-
- /* Enable bypass */
- for (i = 0; i < MAX_TDM_CHAN; i++) {
- if (mask & (0x00000001 << i))
- vpm_out(wc, x, 0x78 + i, 0x01);
- }
-
- }
-}
-
-void
-vpm_check(struct hfc_multi *hctmp)
-{
- unsigned char gpi2;
-
- gpi2 = HFC_inb(hctmp, R_GPI_IN2);
-
- if ((gpi2 & 0x3) != 0x3)
- printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
-}
-
-
-/*
- * Interface to enable/disable the HW Echocan
- *
- * these functions are called within a spin_lock_irqsave on
- * the channel instance lock, so we are not disturbed by irqs
- *
- * we can later easily change the interface to make other
- * things configurable, for now we configure the taps
- *
- */
-
-void
-vpm_echocan_on(struct hfc_multi *hc, int ch, int taps)
-{
- unsigned int timeslot;
- unsigned int unit;
- struct bchannel *bch = hc->chan[ch].bch;
-#ifdef TXADJ
- int txadj = -4;
- struct sk_buff *skb;
-#endif
- if (hc->chan[ch].protocol != ISDN_P_B_RAW)
- return;
-
- if (!bch)
- return;
-
-#ifdef TXADJ
- skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
- sizeof(int), &txadj, GFP_ATOMIC);
- if (skb)
- recv_Bchannel_skb(bch, skb);
-#endif
-
- timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
- unit = ch % 4;
-
- printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n",
- taps, timeslot);
-
- vpm_out(hc, unit, timeslot, 0x7e);
-}
-
-void
-vpm_echocan_off(struct hfc_multi *hc, int ch)
-{
- unsigned int timeslot;
- unsigned int unit;
- struct bchannel *bch = hc->chan[ch].bch;
-#ifdef TXADJ
- int txadj = 0;
- struct sk_buff *skb;
-#endif
-
- if (hc->chan[ch].protocol != ISDN_P_B_RAW)
- return;
-
- if (!bch)
- return;
-
-#ifdef TXADJ
- skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
- sizeof(int), &txadj, GFP_ATOMIC);
- if (skb)
- recv_Bchannel_skb(bch, skb);
-#endif
-
- timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
- unit = ch % 4;
-
- printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n",
- timeslot);
- /* FILLME */
- vpm_out(hc, unit, timeslot, 0x01);
-}
-
-
-/*
- * Speech Design resync feature
- * NOTE: This is called sometimes outside interrupt handler.
- * We must lock irqsave, so no other interrupt (other card) will occurr!
- * Also multiple interrupts may nest, so must lock each access (lists, card)!
- */
-static inline void
-hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
-{
- struct hfc_multi *hc, *next, *pcmmaster = 0;
- u_int *plx_acc_32, pv;
- u_long flags;
-
- spin_lock_irqsave(&HFClock, flags);
- spin_lock(&plx_lock); /* must be locked inside other locks */
-
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n",
- __func__, syncmaster);
-
- /* select new master */
- if (newmaster) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "using provided controller\n");
- } else {
- list_for_each_entry_safe(hc, next, &HFClist, list) {
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- if (hc->syncronized) {
- newmaster = hc;
- break;
- }
- }
- }
- }
-
- /* Disable sync of all cards */
- list_for_each_entry_safe(hc, next, &HFClist, list) {
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
- pv = readl(plx_acc_32);
- pv &= ~PLX_SYNC_O_EN;
- writel(pv, plx_acc_32);
- if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
- pcmmaster = hc;
- if (hc->type == 1) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG
- "Schedule SYNC_I\n");
- hc->e1_resync |= 1; /* get SYNC_I */
- }
- }
- }
- }
-
- if (newmaster) {
- hc = newmaster;
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
- "interface.\n", hc->id, hc);
- /* Enable new sync master */
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
- pv = readl(plx_acc_32);
- pv |= PLX_SYNC_O_EN;
- writel(pv, plx_acc_32);
- /* switch to jatt PLL, if not disabled by RX_SYNC */
- if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "Schedule jatt PLL\n");
- hc->e1_resync |= 2; /* switch to jatt */
- }
- } else {
- if (pcmmaster) {
- hc = pcmmaster;
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG
- "id=%d (0x%p) = PCM master syncronized "
- "with QUARTZ\n", hc->id, hc);
- if (hc->type == 1) {
- /* Use the crystal clock for the PCM
- master card */
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG
- "Schedule QUARTZ for HFC-E1\n");
- hc->e1_resync |= 4; /* switch quartz */
- } else {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG
- "QUARTZ is automatically "
- "enabled by HFC-%dS\n", hc->type);
- }
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
- pv = readl(plx_acc_32);
- pv |= PLX_SYNC_O_EN;
- writel(pv, plx_acc_32);
- } else
- if (!rm)
- printk(KERN_ERR "%s no pcm master, this MUST "
- "not happen!\n", __func__);
- }
- syncmaster = newmaster;
-
- spin_unlock(&plx_lock);
- spin_unlock_irqrestore(&HFClock, flags);
-}
-
-/* This must be called AND hc must be locked irqsave!!! */
-inline void
-plxsd_checksync(struct hfc_multi *hc, int rm)
-{
- if (hc->syncronized) {
- if (syncmaster == NULL) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_WARNING "%s: GOT sync on card %d"
- " (id=%d)\n", __func__, hc->id + 1,
- hc->id);
- hfcmulti_resync(hc, hc, rm);
- }
- } else {
- if (syncmaster == hc) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_WARNING "%s: LOST sync on card %d"
- " (id=%d)\n", __func__, hc->id + 1,
- hc->id);
- hfcmulti_resync(hc, NULL, rm);
- }
- }
-}
-
-
-/*
- * free hardware resources used by driver
- */
-static void
-release_io_hfcmulti(struct hfc_multi *hc)
-{
- u_int *plx_acc_32, pv;
- u_long plx_flags;
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: entered\n", __func__);
-
- /* soft reset also masks all interrupts */
- hc->hw.r_cirm |= V_SRES;
- HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
- udelay(1000);
- hc->hw.r_cirm &= ~V_SRES;
- HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
- udelay(1000); /* instead of 'wait' that may cause locking */
-
- /* release Speech Design card, if PLX was initialized */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "%s: release PLXSD card %d\n",
- __func__, hc->id + 1);
- spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
- writel(PLX_GPIOC_INIT, plx_acc_32);
- pv = readl(plx_acc_32);
- /* Termination off */
- pv &= ~PLX_TERM_ON;
- /* Disconnect the PCM */
- pv |= PLX_SLAVE_EN_N;
- pv &= ~PLX_MASTER_EN;
- pv &= ~PLX_SYNC_O_EN;
- /* Put the DSP in Reset */
- pv &= ~PLX_DSP_RES_N;
- writel(pv, plx_acc_32);
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
- __func__, pv);
- spin_unlock_irqrestore(&plx_lock, plx_flags);
- }
-
- /* disable memory mapped ports / io ports */
- test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
- pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
- if (hc->pci_membase)
- iounmap((void *)hc->pci_membase);
- if (hc->plx_membase)
- iounmap((void *)hc->plx_membase);
- if (hc->pci_iobase)
- release_region(hc->pci_iobase, 8);
-
- if (hc->pci_dev) {
- pci_disable_device(hc->pci_dev);
- pci_set_drvdata(hc->pci_dev, NULL);
- }
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: done\n", __func__);
-}
-
-/*
- * function called to reset the HFC chip. A complete software reset of chip
- * and fifos is done. All configuration of the chip is done.
- */
-
-static int
-init_chip(struct hfc_multi *hc)
-{
- u_long flags, val, val2 = 0, rev;
- int i, err = 0;
- u_char r_conf_en, rval;
- u_int *plx_acc_32, pv;
- u_long plx_flags, hfc_flags;
- int plx_count;
- struct hfc_multi *pos, *next, *plx_last_hc;
-
- spin_lock_irqsave(&hc->lock, flags);
- /* reset all registers */
- memset(&hc->hw, 0, sizeof(struct hfcm_hw));
-
- /* revision check */
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: entered\n", __func__);
- val = HFC_inb(hc, R_CHIP_ID)>>4;
- if (val != 0x8 && val != 0xc && val != 0xe) {
- printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
- err = -EIO;
- goto out;
- }
- rev = HFC_inb(hc, R_CHIP_RV);
- printk(KERN_INFO
- "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
- val, rev, (rev == 0) ? " (old FIFO handling)" : "");
- if (rev == 0) {
- test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
- printk(KERN_WARNING
- "HFC_multi: NOTE: Your chip is revision 0, "
- "ask Cologne Chip for update. Newer chips "
- "have a better FIFO handling. Old chips "
- "still work but may have slightly lower "
- "HDLC transmit performance.\n");
- }
- if (rev > 1) {
- printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't "
- "consider chip revision = %ld. The chip / "
- "bridge may not work.\n", rev);
- }
-
- /* set s-ram size */
- hc->Flen = 0x10;
- hc->Zmin = 0x80;
- hc->Zlen = 384;
- hc->DTMFbase = 0x1000;
- if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n",
- __func__);
- hc->hw.r_ctrl |= V_EXT_RAM;
- hc->hw.r_ram_sz = 1;
- hc->Flen = 0x20;
- hc->Zmin = 0xc0;
- hc->Zlen = 1856;
- hc->DTMFbase = 0x2000;
- }
- if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n",
- __func__);
- hc->hw.r_ctrl |= V_EXT_RAM;
- hc->hw.r_ram_sz = 2;
- hc->Flen = 0x20;
- hc->Zmin = 0xc0;
- hc->Zlen = 8000;
- hc->DTMFbase = 0x2000;
- }
- hc->max_trans = poll << 1;
- if (hc->max_trans > hc->Zlen)
- hc->max_trans = hc->Zlen;
-
- /* Speech Design PLX bridge */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
- __func__, hc->id + 1);
- spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
- writel(PLX_GPIOC_INIT, plx_acc_32);
- pv = readl(plx_acc_32);
- /* The first and the last cards are terminating the PCM bus */
- pv |= PLX_TERM_ON; /* hc is currently the last */
- /* Disconnect the PCM */
- pv |= PLX_SLAVE_EN_N;
- pv &= ~PLX_MASTER_EN;
- pv &= ~PLX_SYNC_O_EN;
- /* Put the DSP in Reset */
- pv &= ~PLX_DSP_RES_N;
- writel(pv, plx_acc_32);
- spin_unlock_irqrestore(&plx_lock, plx_flags);
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
- __func__, pv);
- /*
- * If we are the 3rd PLXSD card or higher, we must turn
- * termination of last PLXSD card off.
- */
- spin_lock_irqsave(&HFClock, hfc_flags);
- plx_count = 0;
- plx_last_hc = NULL;
- list_for_each_entry_safe(pos, next, &HFClist, list) {
- if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) {
- plx_count++;
- if (pos != hc)
- plx_last_hc = pos;
- }
- }
- if (plx_count >= 3) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "%s: card %d is between, so "
- "we disable termination\n",
- __func__, plx_last_hc->id + 1);
- spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(plx_last_hc->plx_membase
- + PLX_GPIOC);
- pv = readl(plx_acc_32);
- pv &= ~PLX_TERM_ON;
- writel(pv, plx_acc_32);
- spin_unlock_irqrestore(&plx_lock, plx_flags);
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
- __func__, pv);
- }
- spin_unlock_irqrestore(&HFClock, hfc_flags);
- hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
- }
-
- /* we only want the real Z2 read-pointer for revision > 0 */
- if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
- hc->hw.r_ram_sz |= V_FZ_MD;
-
- /* select pcm mode */
- if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: setting PCM into slave mode\n",
- __func__);
- } else
- if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: setting PCM into master mode\n",
- __func__);
- hc->hw.r_pcm_md0 |= V_PCM_MD;
- } else {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: performing PCM auto detect\n",
- __func__);
- }
-
- /* soft reset */
- HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
- HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
- HFC_outb(hc, R_FIFO_MD, 0);
- hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
- HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
- udelay(100);
- hc->hw.r_cirm = 0;
- HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
- udelay(100);
- HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
-
- /* Speech Design PLX bridge pcm and sync mode */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
- pv = readl(plx_acc_32);
- /* Connect PCM */
- if (hc->hw.r_pcm_md0 & V_PCM_MD) {
- pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
- pv |= PLX_SYNC_O_EN;
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
- __func__, pv);
- } else {
- pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
- pv &= ~PLX_SYNC_O_EN;
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
- __func__, pv);
- }
- writel(pv, plx_acc_32);
- spin_unlock_irqrestore(&plx_lock, plx_flags);
- }
-
- /* PCM setup */
- HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90);
- if (hc->slots == 32)
- HFC_outb(hc, R_PCM_MD1, 0x00);
- if (hc->slots == 64)
- HFC_outb(hc, R_PCM_MD1, 0x10);
- if (hc->slots == 128)
- HFC_outb(hc, R_PCM_MD1, 0x20);
- HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
- HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
- else
- HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
- HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
- for (i = 0; i < 256; i++) {
- HFC_outb_nodebug(hc, R_SLOT, i);
- HFC_outb_nodebug(hc, A_SL_CFG, 0);
- HFC_outb_nodebug(hc, A_CONF, 0);
- hc->slot_owner[i] = -1;
- }
-
- /* set clock speed */
- if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: setting double clock\n", __func__);
- HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
- }
-
- /* B410P GPIO */
- if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
- printk(KERN_NOTICE "Setting GPIOs\n");
- HFC_outb(hc, R_GPIO_SEL, 0x30);
- HFC_outb(hc, R_GPIO_EN1, 0x3);
- udelay(1000);
- printk(KERN_NOTICE "calling vpm_init\n");
- vpm_init(hc);
- }
-
- /* check if R_F0_CNT counts (8 kHz frame count) */
- val = HFC_inb(hc, R_F0_CNTL);
- val += HFC_inb(hc, R_F0_CNTH) << 8;
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "HFC_multi F0_CNT %ld after reset\n", val);
- spin_unlock_irqrestore(&hc->lock, flags);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout((HZ/100)?:1); /* Timeout minimum 10ms */
- spin_lock_irqsave(&hc->lock, flags);
- val2 = HFC_inb(hc, R_F0_CNTL);
- val2 += HFC_inb(hc, R_F0_CNTH) << 8;
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "HFC_multi F0_CNT %ld after 10 ms (1st try)\n",
- val2);
- if (val2 >= val+8) { /* 1 ms */
- /* it counts, so we keep the pcm mode */
- if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
- printk(KERN_INFO "controller is PCM bus MASTER\n");
- else
- if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip))
- printk(KERN_INFO "controller is PCM bus SLAVE\n");
- else {
- test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
- printk(KERN_INFO "controller is PCM bus SLAVE "
- "(auto detected)\n");
- }
- } else {
- /* does not count */
- if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
-controller_fail:
- printk(KERN_ERR "HFC_multi ERROR, getting no 125us "
- "pulse. Seems that controller fails.\n");
- err = -EIO;
- goto out;
- }
- if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
- printk(KERN_INFO "controller is PCM bus SLAVE "
- "(ignoring missing PCM clock)\n");
- } else {
- /* only one pcm master */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
- && plxsd_master) {
- printk(KERN_ERR "HFC_multi ERROR, no clock "
- "on another Speech Design card found. "
- "Please be sure to connect PCM cable.\n");
- err = -EIO;
- goto out;
- }
- /* retry with master clock */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase +
- PLX_GPIOC);
- pv = readl(plx_acc_32);
- pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
- pv |= PLX_SYNC_O_EN;
- writel(pv, plx_acc_32);
- spin_unlock_irqrestore(&plx_lock, plx_flags);
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: master: PLX_GPIO"
- "=%x\n", __func__, pv);
- }
- hc->hw.r_pcm_md0 |= V_PCM_MD;
- HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
- spin_unlock_irqrestore(&hc->lock, flags);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout((HZ/100)?:1); /* Timeout min. 10ms */
- spin_lock_irqsave(&hc->lock, flags);
- val2 = HFC_inb(hc, R_F0_CNTL);
- val2 += HFC_inb(hc, R_F0_CNTH) << 8;
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "HFC_multi F0_CNT %ld after "
- "10 ms (2nd try)\n", val2);
- if (val2 >= val+8) { /* 1 ms */
- test_and_set_bit(HFC_CHIP_PCM_MASTER,
- &hc->chip);
- printk(KERN_INFO "controller is PCM bus MASTER "
- "(auto detected)\n");
- } else
- goto controller_fail;
- }
- }
-
- /* Release the DSP Reset */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
- plxsd_master = 1;
- spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
- pv = readl(plx_acc_32);
- pv |= PLX_DSP_RES_N;
- writel(pv, plx_acc_32);
- spin_unlock_irqrestore(&plx_lock, plx_flags);
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
- __func__, pv);
- }
-
- /* pcm id */
- if (hc->pcm)
- printk(KERN_INFO "controller has given PCM BUS ID %d\n",
- hc->pcm);
- else {
- if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)
- || test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- PCM_cnt++; /* SD has proprietary bridging */
- }
- hc->pcm = PCM_cnt;
- printk(KERN_INFO "controller has PCM BUS ID %d "
- "(auto selected)\n", hc->pcm);
- }
-
- /* set up timer */
- HFC_outb(hc, R_TI_WD, poll_timer);
- hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
-
- /*
- * set up 125us interrupt, only if function pointer is available
- * and module parameter timer is set
- */
- if (timer && hfc_interrupt && register_interrupt) {
- /* only one chip should use this interrupt */
- timer = 0;
- interrupt_registered = 1;
- hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK;
- /* deactivate other interrupts in ztdummy */
- register_interrupt();
- }
-
- /* set E1 state machine IRQ */
- if (hc->type == 1)
- hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
-
- /* set DTMF detection */
- if (test_bit(HFC_CHIP_DTMF, &hc->chip)) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: enabling DTMF detection "
- "for all B-channel\n", __func__);
- hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP;
- if (test_bit(HFC_CHIP_ULAW, &hc->chip))
- hc->hw.r_dtmf |= V_ULAW_SEL;
- HFC_outb(hc, R_DTMF_N, 102 - 1);
- hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK;
- }
-
- /* conference engine */
- if (test_bit(HFC_CHIP_ULAW, &hc->chip))
- r_conf_en = V_CONF_EN | V_ULAW;
- else
- r_conf_en = V_CONF_EN;
- HFC_outb(hc, R_CONF_EN, r_conf_en);
-
- /* setting leds */
- switch (hc->leds) {
- case 1: /* HFC-E1 OEM */
- if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
- HFC_outb(hc, R_GPIO_SEL, 0x32);
- else
- HFC_outb(hc, R_GPIO_SEL, 0x30);
-
- HFC_outb(hc, R_GPIO_EN1, 0x0f);
- HFC_outb(hc, R_GPIO_OUT1, 0x00);
-
- HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
- break;
-
- case 2: /* HFC-4S OEM */
- case 3:
- HFC_outb(hc, R_GPIO_SEL, 0xf0);
- HFC_outb(hc, R_GPIO_EN1, 0xff);
- HFC_outb(hc, R_GPIO_OUT1, 0x00);
- break;
- }
-
- /* set master clock */
- if (hc->masterclk >= 0) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: setting ST master clock "
- "to port %d (0..%d)\n",
- __func__, hc->masterclk, hc->ports-1);
- hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
- HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
- }
-
- /* setting misc irq */
- HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n",
- hc->hw.r_irqmsk_misc);
-
- /* RAM access test */
- HFC_outb(hc, R_RAM_ADDR0, 0);
- HFC_outb(hc, R_RAM_ADDR1, 0);
- HFC_outb(hc, R_RAM_ADDR2, 0);
- for (i = 0; i < 256; i++) {
- HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
- HFC_outb_nodebug(hc, R_RAM_DATA, ((i*3)&0xff));
- }
- for (i = 0; i < 256; i++) {
- HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
- HFC_inb_nodebug(hc, R_RAM_DATA);
- rval = HFC_inb_nodebug(hc, R_INT_DATA);
- if (rval != ((i * 3) & 0xff)) {
- printk(KERN_DEBUG
- "addr:%x val:%x should:%x\n", i, rval,
- (i * 3) & 0xff);
- err++;
- }
- }
- if (err) {
- printk(KERN_DEBUG "aborting - %d RAM access errors\n", err);
- err = -EIO;
- goto out;
- }
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: done\n", __func__);
-out:
- spin_unlock_irqrestore(&hc->lock, flags);
- return err;
-}
-
-
-/*
- * control the watchdog
- */
-static void
-hfcmulti_watchdog(struct hfc_multi *hc)
-{
- hc->wdcount++;
-
- if (hc->wdcount > 10) {
- hc->wdcount = 0;
- hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ?
- V_GPIO_OUT3 : V_GPIO_OUT2;
-
- /* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */
- HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
- HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte);
- }
-}
-
-
-
-/*
- * output leds
- */
-static void
-hfcmulti_leds(struct hfc_multi *hc)
-{
- unsigned long lled;
- unsigned long leddw;
- int i, state, active, leds;
- struct dchannel *dch;
- int led[4];
-
- hc->ledcount += poll;
- if (hc->ledcount > 4096) {
- hc->ledcount -= 4096;
- hc->ledstate = 0xAFFEAFFE;
- }
-
- switch (hc->leds) {
- case 1: /* HFC-E1 OEM */
- /* 2 red blinking: NT mode deactivate
- * 2 red steady: TE mode deactivate
- * left green: L1 active
- * left red: frame sync, but no L1
- * right green: L2 active
- */
- if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */
- if (hc->chan[hc->dslot].dch->dev.D.protocol
- != ISDN_P_NT_E1) {
- led[0] = 1;
- led[1] = 1;
- } else if (hc->ledcount>>11) {
- led[0] = 1;
- led[1] = 1;
- } else {
- led[0] = 0;
- led[1] = 0;
- }
- led[2] = 0;
- led[3] = 0;
- } else { /* with frame sync */
- /* TODO make it work */
- led[0] = 0;
- led[1] = 0;
- led[2] = 0;
- led[3] = 1;
- }
- leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF;
- /* leds are inverted */
- if (leds != (int)hc->ledstate) {
- HFC_outb_nodebug(hc, R_GPIO_OUT1, leds);
- hc->ledstate = leds;
- }
- break;
-
- case 2: /* HFC-4S OEM */
- /* red blinking = PH_DEACTIVATE NT Mode
- * red steady = PH_DEACTIVATE TE Mode
- * green steady = PH_ACTIVATE
- */
- for (i = 0; i < 4; i++) {
- state = 0;
- active = -1;
- dch = hc->chan[(i << 2) | 2].dch;
- if (dch) {
- state = dch->state;
- if (dch->dev.D.protocol == ISDN_P_NT_S0)
- active = 3;
- else
- active = 7;
- }
- if (state) {
- if (state == active) {
- led[i] = 1; /* led green */
- } else
- if (dch->dev.D.protocol == ISDN_P_TE_S0)
- /* TE mode: led red */
- led[i] = 2;
- else
- if (hc->ledcount>>11)
- /* led red */
- led[i] = 2;
- else
- /* led off */
- led[i] = 0;
- } else
- led[i] = 0; /* led off */
- }
- if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
- leds = 0;
- for (i = 0; i < 4; i++) {
- if (led[i] == 1) {
- /*green*/
- leds |= (0x2 << (i * 2));
- } else if (led[i] == 2) {
- /*red*/
- leds |= (0x1 << (i * 2));
- }
- }
- if (leds != (int)hc->ledstate) {
- vpm_out(hc, 0, 0x1a8 + 3, leds);
- hc->ledstate = leds;
- }
- } else {
- leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) |
- ((led[0] > 0) << 2) | ((led[2] > 0) << 3) |
- ((led[3] & 1) << 4) | ((led[1] & 1) << 5) |
- ((led[0] & 1) << 6) | ((led[2] & 1) << 7);
- if (leds != (int)hc->ledstate) {
- HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F);
- HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4);
- hc->ledstate = leds;
- }
- }
- break;
-
- case 3: /* HFC 1S/2S Beronet */
- /* red blinking = PH_DEACTIVATE NT Mode
- * red steady = PH_DEACTIVATE TE Mode
- * green steady = PH_ACTIVATE
- */
- for (i = 0; i < 2; i++) {
- state = 0;
- active = -1;
- dch = hc->chan[(i << 2) | 2].dch;
- if (dch) {
- state = dch->state;
- if (dch->dev.D.protocol == ISDN_P_NT_S0)
- active = 3;
- else
- active = 7;
- }
- if (state) {
- if (state == active) {
- led[i] = 1; /* led green */
- } else
- if (dch->dev.D.protocol == ISDN_P_TE_S0)
- /* TE mode: led red */
- led[i] = 2;
- else
- if (hc->ledcount >> 11)
- /* led red */
- led[i] = 2;
- else
- /* led off */
- led[i] = 0;
- } else
- led[i] = 0; /* led off */
- }
-
-
- leds = (led[0] > 0) | ((led[1] > 0)<<1) | ((led[0]&1)<<2)
- | ((led[1]&1)<<3);
- if (leds != (int)hc->ledstate) {
- HFC_outb_nodebug(hc, R_GPIO_EN1,
- ((led[0] > 0) << 2) | ((led[1] > 0) << 3));
- HFC_outb_nodebug(hc, R_GPIO_OUT1,
- ((led[0] & 1) << 2) | ((led[1] & 1) << 3));
- hc->ledstate = leds;
- }
- break;
- case 8: /* HFC 8S+ Beronet */
- lled = 0;
-
- for (i = 0; i < 8; i++) {
- state = 0;
- active = -1;
- dch = hc->chan[(i << 2) | 2].dch;
- if (dch) {
- state = dch->state;
- if (dch->dev.D.protocol == ISDN_P_NT_S0)
- active = 3;
- else
- active = 7;
- }
- if (state) {
- if (state == active) {
- lled |= 0 << i;
- } else
- if (hc->ledcount >> 11)
- lled |= 0 << i;
- else
- lled |= 1 << i;
- } else
- lled |= 1 << i;
- }
- leddw = lled << 24 | lled << 16 | lled << 8 | lled;
- if (leddw != hc->ledstate) {
- /* HFC_outb(hc, R_BRG_PCM_CFG, 1);
- HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */
- /* was _io before */
- HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
- outw(0x4000, hc->pci_iobase + 4);
- outl(leddw, hc->pci_iobase);
- HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK);
- hc->ledstate = leddw;
- }
- break;
- }
-}
-/*
- * read dtmf coefficients
- */
-
-static void
-hfcmulti_dtmf(struct hfc_multi *hc)
-{
- s32 *coeff;
- u_int mantissa;
- int co, ch;
- struct bchannel *bch = NULL;
- u8 exponent;
- int dtmf = 0;
- int addr;
- u16 w_float;
- struct sk_buff *skb;
- struct mISDNhead *hh;
-
- if (debug & DEBUG_HFCMULTI_DTMF)
- printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__);
- for (ch = 0; ch <= 31; ch++) {
- /* only process enabled B-channels */
- bch = hc->chan[ch].bch;
- if (!bch)
- continue;
- if (!hc->created[hc->chan[ch].port])
- continue;
- if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
- continue;
- if (debug & DEBUG_HFCMULTI_DTMF)
- printk(KERN_DEBUG "%s: dtmf channel %d:",
- __func__, ch);
- coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]);
- dtmf = 1;
- for (co = 0; co < 8; co++) {
- /* read W(n-1) coefficient */
- addr = hc->DTMFbase + ((co<<7) | (ch<<2));
- HFC_outb_nodebug(hc, R_RAM_ADDR0, addr);
- HFC_outb_nodebug(hc, R_RAM_ADDR1, addr>>8);
- HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr>>16)
- | V_ADDR_INC);
- w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
- w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
- if (debug & DEBUG_HFCMULTI_DTMF)
- printk(" %04x", w_float);
-
- /* decode float (see chip doc) */
- mantissa = w_float & 0x0fff;
- if (w_float & 0x8000)
- mantissa |= 0xfffff000;
- exponent = (w_float>>12) & 0x7;
- if (exponent) {
- mantissa ^= 0x1000;
- mantissa <<= (exponent-1);
- }
-
- /* store coefficient */
- coeff[co<<1] = mantissa;
-
- /* read W(n) coefficient */
- w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
- w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
- if (debug & DEBUG_HFCMULTI_DTMF)
- printk(" %04x", w_float);
-
- /* decode float (see chip doc) */
- mantissa = w_float & 0x0fff;
- if (w_float & 0x8000)
- mantissa |= 0xfffff000;
- exponent = (w_float>>12) & 0x7;
- if (exponent) {
- mantissa ^= 0x1000;
- mantissa <<= (exponent-1);
- }
-
- /* store coefficient */
- coeff[(co<<1)|1] = mantissa;
- }
- if (debug & DEBUG_HFCMULTI_DTMF)
- printk("%s: DTMF ready %08x %08x %08x %08x "
- "%08x %08x %08x %08x\n", __func__,
- coeff[0], coeff[1], coeff[2], coeff[3],
- coeff[4], coeff[5], coeff[6], coeff[7]);
- hc->chan[ch].coeff_count++;
- if (hc->chan[ch].coeff_count == 8) {
- hc->chan[ch].coeff_count = 0;
- skb = mI_alloc_skb(512, GFP_ATOMIC);
- if (!skb) {
- printk(KERN_WARNING "%s: No memory for skb\n",
- __func__);
- continue;
- }
- hh = mISDN_HEAD_P(skb);
- hh->prim = PH_CONTROL_IND;
- hh->id = DTMF_HFC_COEF;
- memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512);
- recv_Bchannel_skb(bch, skb);
- }
- }
-
- /* restart DTMF processing */
- hc->dtmf = dtmf;
- if (dtmf)
- HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF);
-}
-
-
-/*
- * fill fifo as much as possible
- */
-
-static void
-hfcmulti_tx(struct hfc_multi *hc, int ch)
-{
- int i, ii, temp, len = 0;
- int Zspace, z1, z2; /* must be int for calculation */
- int Fspace, f1, f2;
- u_char *d;
- int *txpending, slot_tx;
- struct bchannel *bch;
- struct dchannel *dch;
- struct sk_buff **sp = NULL;
- int *idxp;
-
- bch = hc->chan[ch].bch;
- dch = hc->chan[ch].dch;
- if ((!dch) && (!bch))
- return;
-
- txpending = &hc->chan[ch].txpending;
- slot_tx = hc->chan[ch].slot_tx;
- if (dch) {
- if (!test_bit(FLG_ACTIVE, &dch->Flags))
- return;
- sp = &dch->tx_skb;
- idxp = &dch->tx_idx;
- } else {
- if (!test_bit(FLG_ACTIVE, &bch->Flags))
- return;
- sp = &bch->tx_skb;
- idxp = &bch->tx_idx;
- }
- if (*sp)
- len = (*sp)->len;
-
- if ((!len) && *txpending != 1)
- return; /* no data */
-
- if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
- (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
- (hc->chan[ch].slot_rx < 0) &&
- (hc->chan[ch].slot_tx < 0))
- HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1));
- else
- HFC_outb_nodebug(hc, R_FIFO, ch << 1);
- HFC_wait_nodebug(hc);
-
- if (*txpending == 2) {
- /* reset fifo */
- HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait_nodebug(hc);
- HFC_outb(hc, A_SUBCH_CFG, 0);
- *txpending = 1;
- }
-next_frame:
- if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
- f1 = HFC_inb_nodebug(hc, A_F1);
- f2 = HFC_inb_nodebug(hc, A_F2);
- while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) {
- if (debug & DEBUG_HFCMULTI_FIFO)
- printk(KERN_DEBUG
- "%s(card %d): reread f2 because %d!=%d\n",
- __func__, hc->id + 1, temp, f2);
- f2 = temp; /* repeat until F2 is equal */
- }
- Fspace = f2 - f1 - 1;
- if (Fspace < 0)
- Fspace += hc->Flen;
- /*
- * Old FIFO handling doesn't give us the current Z2 read
- * pointer, so we cannot send the next frame before the fifo
- * is empty. It makes no difference except for a slightly
- * lower performance.
- */
- if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) {
- if (f1 != f2)
- Fspace = 0;
- else
- Fspace = 1;
- }
- /* one frame only for ST D-channels, to allow resending */
- if (hc->type != 1 && dch) {
- if (f1 != f2)
- Fspace = 0;
- }
- /* F-counter full condition */
- if (Fspace == 0)
- return;
- }
- z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
- z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
- while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) {
- if (debug & DEBUG_HFCMULTI_FIFO)
- printk(KERN_DEBUG "%s(card %d): reread z2 because "
- "%d!=%d\n", __func__, hc->id + 1, temp, z2);
- z2 = temp; /* repeat unti Z2 is equal */
- }
- Zspace = z2 - z1;
- if (Zspace <= 0)
- Zspace += hc->Zlen;
- Zspace -= 4; /* keep not too full, so pointers will not overrun */
- /* fill transparent data only to maxinum transparent load (minus 4) */
- if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
- Zspace = Zspace - hc->Zlen + hc->max_trans;
- if (Zspace <= 0) /* no space of 4 bytes */
- return;
-
- /* if no data */
- if (!len) {
- if (z1 == z2) { /* empty */
- /* if done with FIFO audio data during PCM connection */
- if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) &&
- *txpending && slot_tx >= 0) {
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_DEBUG
- "%s: reconnecting PCM due to no "
- "more FIFO data: channel %d "
- "slot_tx %d\n",
- __func__, ch, slot_tx);
- /* connect slot */
- HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
- V_HDLC_TRP | V_IFF);
- HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
- HFC_wait_nodebug(hc);
- HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
- V_HDLC_TRP | V_IFF);
- HFC_outb_nodebug(hc, R_FIFO, ch<<1);
- HFC_wait_nodebug(hc);
- }
- *txpending = 0;
- }
- return; /* no data */
- }
-
- /* if audio data and connected slot */
- if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
- && slot_tx >= 0) {
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_DEBUG "%s: disconnecting PCM due to "
- "FIFO data: channel %d slot_tx %d\n",
- __func__, ch, slot_tx);
- /* disconnect slot */
- HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
- HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
- HFC_wait_nodebug(hc);
- HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
- HFC_outb_nodebug(hc, R_FIFO, ch<<1);
- HFC_wait_nodebug(hc);
- }
- *txpending = 1;
-
- /* show activity */
- hc->activity[hc->chan[ch].port] = 1;
-
- /* fill fifo to what we have left */
- ii = len;
- if (dch || test_bit(FLG_HDLC, &bch->Flags))
- temp = 1;
- else
- temp = 0;
- i = *idxp;
- d = (*sp)->data + i;
- if (ii - i > Zspace)
- ii = Zspace + i;
- if (debug & DEBUG_HFCMULTI_FIFO)
- printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
- "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
- __func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
- temp ? "HDLC":"TRANS");
-
-
- /* Have to prep the audio data */
- hc->write_fifo(hc, d, ii - i);
- *idxp = ii;
-
- /* if not all data has been written */
- if (ii != len) {
- /* NOTE: fifo is started by the calling function */
- return;
- }
-
- /* if all data has been written, terminate frame */
- if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
- /* increment f-counter */
- HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
- HFC_wait_nodebug(hc);
- }
-
- /* send confirm, since get_net_bframe will not do it with trans */
- if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
- confirm_Bsend(bch);
-
- /* check for next frame */
- dev_kfree_skb(*sp);
- if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */
- len = (*sp)->len;
- goto next_frame;
- }
- if (dch && get_next_dframe(dch)) {
- len = (*sp)->len;
- goto next_frame;
- }
-
- /*
- * now we have no more data, so in case of transparent,
- * we set the last byte in fifo to 'silence' in case we will get
- * no more data at all. this prevents sending an undefined value.
- */
- if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
- HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
-}
-
-
-/* NOTE: only called if E1 card is in active state */
-static void
-hfcmulti_rx(struct hfc_multi *hc, int ch)
-{
- int temp;
- int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */
- int f1 = 0, f2 = 0; /* = 0, to make GCC happy */
- int again = 0;
- struct bchannel *bch;
- struct dchannel *dch;
- struct sk_buff *skb, **sp = NULL;
- int maxlen;
-
- bch = hc->chan[ch].bch;
- dch = hc->chan[ch].dch;
- if ((!dch) && (!bch))
- return;
- if (dch) {
- if (!test_bit(FLG_ACTIVE, &dch->Flags))
- return;
- sp = &dch->rx_skb;
- maxlen = dch->maxlen;
- } else {
- if (!test_bit(FLG_ACTIVE, &bch->Flags))
- return;
- sp = &bch->rx_skb;
- maxlen = bch->maxlen;
- }
-next_frame:
- /* on first AND before getting next valid frame, R_FIFO must be written
- to. */
- if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
- (hc->chan[ch].protocol == ISDN_P_B_RAW) &&
- (hc->chan[ch].slot_rx < 0) &&
- (hc->chan[ch].slot_tx < 0))
- HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch<<1) | 1);
- else
- HFC_outb_nodebug(hc, R_FIFO, (ch<<1)|1);
- HFC_wait_nodebug(hc);
-
- /* ignore if rx is off BUT change fifo (above) to start pending TX */
- if (hc->chan[ch].rx_off)
- return;
-
- if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
- f1 = HFC_inb_nodebug(hc, A_F1);
- while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) {
- if (debug & DEBUG_HFCMULTI_FIFO)
- printk(KERN_DEBUG
- "%s(card %d): reread f1 because %d!=%d\n",
- __func__, hc->id + 1, temp, f1);
- f1 = temp; /* repeat until F1 is equal */
- }
- f2 = HFC_inb_nodebug(hc, A_F2);
- }
- z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
- while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) {
- if (debug & DEBUG_HFCMULTI_FIFO)
- printk(KERN_DEBUG "%s(card %d): reread z2 because "
- "%d!=%d\n", __func__, hc->id + 1, temp, z2);
- z1 = temp; /* repeat until Z1 is equal */
- }
- z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
- Zsize = z1 - z2;
- if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2)
- /* complete hdlc frame */
- Zsize++;
- if (Zsize < 0)
- Zsize += hc->Zlen;
- /* if buffer is empty */
- if (Zsize <= 0)
- return;
-
- if (*sp == NULL) {
- *sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC);
- if (*sp == NULL) {
- printk(KERN_DEBUG "%s: No mem for rx_skb\n",
- __func__);
- return;
- }
- }
- /* show activity */
- hc->activity[hc->chan[ch].port] = 1;
-
- /* empty fifo with what we have */
- if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
- if (debug & DEBUG_HFCMULTI_FIFO)
- printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d "
- "bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) "
- "got=%d (again %d)\n", __func__, hc->id + 1, ch,
- Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE",
- f1, f2, Zsize + (*sp)->len, again);
- /* HDLC */
- if ((Zsize + (*sp)->len) > (maxlen + 3)) {
- if (debug & DEBUG_HFCMULTI_FIFO)
- printk(KERN_DEBUG
- "%s(card %d): hdlc-frame too large.\n",
- __func__, hc->id + 1);
- skb_trim(*sp, 0);
- HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait_nodebug(hc);
- return;
- }
-
- hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
-
- if (f1 != f2) {
- /* increment Z2,F2-counter */
- HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
- HFC_wait_nodebug(hc);
- /* check size */
- if ((*sp)->len < 4) {
- if (debug & DEBUG_HFCMULTI_FIFO)
- printk(KERN_DEBUG
- "%s(card %d): Frame below minimum "
- "size\n", __func__, hc->id + 1);
- skb_trim(*sp, 0);
- goto next_frame;
- }
- /* there is at least one complete frame, check crc */
- if ((*sp)->data[(*sp)->len - 1]) {
- if (debug & DEBUG_HFCMULTI_CRC)
- printk(KERN_DEBUG
- "%s: CRC-error\n", __func__);
- skb_trim(*sp, 0);
- goto next_frame;
- }
- skb_trim(*sp, (*sp)->len - 3);
- if ((*sp)->len < MISDN_COPY_SIZE) {
- skb = *sp;
- *sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
- if (*sp) {
- memcpy(skb_put(*sp, skb->len),
- skb->data, skb->len);
- skb_trim(skb, 0);
- } else {
- printk(KERN_DEBUG "%s: No mem\n",
- __func__);
- *sp = skb;
- skb = NULL;
- }
- } else {
- skb = NULL;
- }
- if (debug & DEBUG_HFCMULTI_FIFO) {
- printk(KERN_DEBUG "%s(card %d):",
- __func__, hc->id + 1);
- temp = 0;
- while (temp < (*sp)->len)
- printk(" %02x", (*sp)->data[temp++]);
- printk("\n");
- }
- if (dch)
- recv_Dchannel(dch);
- else
- recv_Bchannel(bch);
- *sp = skb;
- again++;
- goto next_frame;
- }
- /* there is an incomplete frame */
- } else {
- /* transparent */
- if (Zsize > skb_tailroom(*sp))
- Zsize = skb_tailroom(*sp);
- hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
- if (((*sp)->len) < MISDN_COPY_SIZE) {
- skb = *sp;
- *sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
- if (*sp) {
- memcpy(skb_put(*sp, skb->len),
- skb->data, skb->len);
- skb_trim(skb, 0);
- } else {
- printk(KERN_DEBUG "%s: No mem\n", __func__);
- *sp = skb;
- skb = NULL;
- }
- } else {
- skb = NULL;
- }
- if (debug & DEBUG_HFCMULTI_FIFO)
- printk(KERN_DEBUG
- "%s(card %d): fifo(%d) reading %d bytes "
- "(z1=%04x, z2=%04x) TRANS\n",
- __func__, hc->id + 1, ch, Zsize, z1, z2);
- /* only bch is transparent */
- recv_Bchannel(bch);
- *sp = skb;
- }
-}
-
-
-/*
- * Interrupt handler
- */
-static void
-signal_state_up(struct dchannel *dch, int info, char *msg)
-{
- struct sk_buff *skb;
- int id, data = info;
-
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG "%s: %s\n", __func__, msg);
-
- id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */
-
- skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data,
- GFP_ATOMIC);
- if (!skb)
- return;
- recv_Dchannel_skb(dch, skb);
-}
-
-static inline void
-handle_timer_irq(struct hfc_multi *hc)
-{
- int ch, temp;
- struct dchannel *dch;
- u_long flags;
-
- /* process queued resync jobs */
- if (hc->e1_resync) {
- /* lock, so e1_resync gets not changed */
- spin_lock_irqsave(&HFClock, flags);
- if (hc->e1_resync & 1) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "Enable SYNC_I\n");
- HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC);
- /* disable JATT, if RX_SYNC is set */
- if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
- HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
- }
- if (hc->e1_resync & 2) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG "Enable jatt PLL\n");
- HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
- }
- if (hc->e1_resync & 4) {
- if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_DEBUG
- "Enable QUARTZ for HFC-E1\n");
- /* set jatt to quartz */
- HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC
- | V_JATT_OFF);
- /* switch to JATT, in case it is not already */
- HFC_outb(hc, R_SYNC_OUT, 0);
- }
- hc->e1_resync = 0;
- spin_unlock_irqrestore(&HFClock, flags);
- }
-
- if (hc->type != 1 || hc->e1_state == 1)
- for (ch = 0; ch <= 31; ch++) {
- if (hc->created[hc->chan[ch].port]) {
- hfcmulti_tx(hc, ch);
- /* fifo is started when switching to rx-fifo */
- hfcmulti_rx(hc, ch);
- if (hc->chan[ch].dch &&
- hc->chan[ch].nt_timer > -1) {
- dch = hc->chan[ch].dch;
- if (!(--hc->chan[ch].nt_timer)) {
- schedule_event(dch,
- FLG_PHCHANGE);
- if (debug &
- DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG
- "%s: nt_timer at "
- "state %x\n",
- __func__,
- dch->state);
- }
- }
- }
- }
- if (hc->type == 1 && hc->created[0]) {
- dch = hc->chan[hc->dslot].dch;
- if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
- /* LOS */
- temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS;
- if (!temp && hc->chan[hc->dslot].los)
- signal_state_up(dch, L1_SIGNAL_LOS_ON,
- "LOS detected");
- if (temp && !hc->chan[hc->dslot].los)
- signal_state_up(dch, L1_SIGNAL_LOS_OFF,
- "LOS gone");
- hc->chan[hc->dslot].los = temp;
- }
- if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) {
- /* AIS */
- temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS;
- if (!temp && hc->chan[hc->dslot].ais)
- signal_state_up(dch, L1_SIGNAL_AIS_ON,
- "AIS detected");
- if (temp && !hc->chan[hc->dslot].ais)
- signal_state_up(dch, L1_SIGNAL_AIS_OFF,
- "AIS gone");
- hc->chan[hc->dslot].ais = temp;
- }
- if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) {
- /* SLIP */
- temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX;
- if (!temp && hc->chan[hc->dslot].slip_rx)
- signal_state_up(dch, L1_SIGNAL_SLIP_RX,
- " bit SLIP detected RX");
- hc->chan[hc->dslot].slip_rx = temp;
- temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX;
- if (!temp && hc->chan[hc->dslot].slip_tx)
- signal_state_up(dch, L1_SIGNAL_SLIP_TX,
- " bit SLIP detected TX");
- hc->chan[hc->dslot].slip_tx = temp;
- }
- if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) {
- /* RDI */
- temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A;
- if (!temp && hc->chan[hc->dslot].rdi)
- signal_state_up(dch, L1_SIGNAL_RDI_ON,
- "RDI detected");
- if (temp && !hc->chan[hc->dslot].rdi)
- signal_state_up(dch, L1_SIGNAL_RDI_OFF,
- "RDI gone");
- hc->chan[hc->dslot].rdi = temp;
- }
- temp = HFC_inb_nodebug(hc, R_JATT_DIR);
- switch (hc->chan[hc->dslot].sync) {
- case 0:
- if ((temp & 0x60) == 0x60) {
- if (debug & DEBUG_HFCMULTI_SYNC)
- printk(KERN_DEBUG
- "%s: (id=%d) E1 now "
- "in clock sync\n",
- __func__, hc->id);
- HFC_outb(hc, R_RX_OFF,
- hc->chan[hc->dslot].jitter | V_RX_INIT);
- HFC_outb(hc, R_TX_OFF,
- hc->chan[hc->dslot].jitter | V_RX_INIT);
- hc->chan[hc->dslot].sync = 1;
- goto check_framesync;
- }
- break;
- case 1:
- if ((temp & 0x60) != 0x60) {
- if (debug & DEBUG_HFCMULTI_SYNC)
- printk(KERN_DEBUG
- "%s: (id=%d) E1 "
- "lost clock sync\n",
- __func__, hc->id);
- hc->chan[hc->dslot].sync = 0;
- break;
- }
-check_framesync:
- temp = HFC_inb_nodebug(hc, R_SYNC_STA);
- if (temp == 0x27) {
- if (debug & DEBUG_HFCMULTI_SYNC)
- printk(KERN_DEBUG
- "%s: (id=%d) E1 "
- "now in frame sync\n",
- __func__, hc->id);
- hc->chan[hc->dslot].sync = 2;
- }
- break;
- case 2:
- if ((temp & 0x60) != 0x60) {
- if (debug & DEBUG_HFCMULTI_SYNC)
- printk(KERN_DEBUG
- "%s: (id=%d) E1 lost "
- "clock & frame sync\n",
- __func__, hc->id);
- hc->chan[hc->dslot].sync = 0;
- break;
- }
- temp = HFC_inb_nodebug(hc, R_SYNC_STA);
- if (temp != 0x27) {
- if (debug & DEBUG_HFCMULTI_SYNC)
- printk(KERN_DEBUG
- "%s: (id=%d) E1 "
- "lost frame sync\n",
- __func__, hc->id);
- hc->chan[hc->dslot].sync = 1;
- }
- break;
- }
- }
-
- if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
- hfcmulti_watchdog(hc);
-
- if (hc->leds)
- hfcmulti_leds(hc);
-}
-
-static void
-ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech)
-{
- struct dchannel *dch;
- int ch;
- int active;
- u_char st_status, temp;
-
- /* state machine */
- for (ch = 0; ch <= 31; ch++) {
- if (hc->chan[ch].dch) {
- dch = hc->chan[ch].dch;
- if (r_irq_statech & 1) {
- HFC_outb_nodebug(hc, R_ST_SEL,
- hc->chan[ch].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- /* undocumented: status changes during read */
- st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE);
- while (st_status != (temp =
- HFC_inb_nodebug(hc, A_ST_RD_STATE))) {
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG "%s: reread "
- "STATE because %d!=%d\n",
- __func__, temp,
- st_status);
- st_status = temp; /* repeat */
- }
-
- /* Speech Design TE-sync indication */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip) &&
- dch->dev.D.protocol == ISDN_P_TE_S0) {
- if (st_status & V_FR_SYNC_ST)
- hc->syncronized |=
- (1 << hc->chan[ch].port);
- else
- hc->syncronized &=
- ~(1 << hc->chan[ch].port);
- }
- dch->state = st_status & 0x0f;
- if (dch->dev.D.protocol == ISDN_P_NT_S0)
- active = 3;
- else
- active = 7;
- if (dch->state == active) {
- HFC_outb_nodebug(hc, R_FIFO,
- (ch << 1) | 1);
- HFC_wait_nodebug(hc);
- HFC_outb_nodebug(hc,
- R_INC_RES_FIFO, V_RES_F);
- HFC_wait_nodebug(hc);
- dch->tx_idx = 0;
- }
- schedule_event(dch, FLG_PHCHANGE);
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG
- "%s: S/T newstate %x port %d\n",
- __func__, dch->state,
- hc->chan[ch].port);
- }
- r_irq_statech >>= 1;
- }
- }
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
- plxsd_checksync(hc, 0);
-}
-
-static void
-fifo_irq(struct hfc_multi *hc, int block)
-{
- int ch, j;
- struct dchannel *dch;
- struct bchannel *bch;
- u_char r_irq_fifo_bl;
-
- r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block);
- j = 0;
- while (j < 8) {
- ch = (block << 2) + (j >> 1);
- dch = hc->chan[ch].dch;
- bch = hc->chan[ch].bch;
- if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) {
- j += 2;
- continue;
- }
- if (dch && (r_irq_fifo_bl & (1 << j)) &&
- test_bit(FLG_ACTIVE, &dch->Flags)) {
- hfcmulti_tx(hc, ch);
- /* start fifo */
- HFC_outb_nodebug(hc, R_FIFO, 0);
- HFC_wait_nodebug(hc);
- }
- if (bch && (r_irq_fifo_bl & (1 << j)) &&
- test_bit(FLG_ACTIVE, &bch->Flags)) {
- hfcmulti_tx(hc, ch);
- /* start fifo */
- HFC_outb_nodebug(hc, R_FIFO, 0);
- HFC_wait_nodebug(hc);
- }
- j++;
- if (dch && (r_irq_fifo_bl & (1 << j)) &&
- test_bit(FLG_ACTIVE, &dch->Flags)) {
- hfcmulti_rx(hc, ch);
- }
- if (bch && (r_irq_fifo_bl & (1 << j)) &&
- test_bit(FLG_ACTIVE, &bch->Flags)) {
- hfcmulti_rx(hc, ch);
- }
- j++;
- }
-}
-
-#ifdef IRQ_DEBUG
-int irqsem;
-#endif
-static irqreturn_t
-hfcmulti_interrupt(int intno, void *dev_id)
-{
-#ifdef IRQCOUNT_DEBUG
- static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
- iq5 = 0, iq6 = 0, iqcnt = 0;
-#endif
- static int count;
- struct hfc_multi *hc = dev_id;
- struct dchannel *dch;
- u_char r_irq_statech, status, r_irq_misc, r_irq_oview;
- int i;
- u_short *plx_acc, wval;
- u_char e1_syncsta, temp;
- u_long flags;
-
- if (!hc) {
- printk(KERN_ERR "HFC-multi: Spurious interrupt!\n");
- return IRQ_NONE;
- }
-
- spin_lock(&hc->lock);
-
-#ifdef IRQ_DEBUG
- if (irqsem)
- printk(KERN_ERR "irq for card %d during irq from "
- "card %d, this is no bug.\n", hc->id + 1, irqsem);
- irqsem = hc->id + 1;
-#endif
-
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- spin_lock_irqsave(&plx_lock, flags);
- plx_acc = (u_short *)(hc->plx_membase + PLX_INTCSR);
- wval = readw(plx_acc);
- spin_unlock_irqrestore(&plx_lock, flags);
- if (!(wval & PLX_INTCSR_LINTI1_STATUS))
- goto irq_notforus;
- }
-
- status = HFC_inb_nodebug(hc, R_STATUS);
- r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH);
-#ifdef IRQCOUNT_DEBUG
- if (r_irq_statech)
- iq1++;
- if (status & V_DTMF_STA)
- iq2++;
- if (status & V_LOST_STA)
- iq3++;
- if (status & V_EXT_IRQSTA)
- iq4++;
- if (status & V_MISC_IRQSTA)
- iq5++;
- if (status & V_FR_IRQSTA)
- iq6++;
- if (iqcnt++ > 5000) {
- printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n",
- iq1, iq2, iq3, iq4, iq5, iq6);
- iqcnt = 0;
- }
-#endif
- if (!r_irq_statech &&
- !(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
- V_MISC_IRQSTA | V_FR_IRQSTA))) {
- /* irq is not for us */
- goto irq_notforus;
- }
- hc->irqcnt++;
- if (r_irq_statech) {
- if (hc->type != 1)
- ph_state_irq(hc, r_irq_statech);
- }
- if (status & V_EXT_IRQSTA)
- ; /* external IRQ */
- if (status & V_LOST_STA) {
- /* LOST IRQ */
- HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */
- }
- if (status & V_MISC_IRQSTA) {
- /* misc IRQ */
- r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
- if (r_irq_misc & V_STA_IRQ) {
- if (hc->type == 1) {
- /* state machine */
- dch = hc->chan[hc->dslot].dch;
- e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
- && hc->e1_getclock) {
- if (e1_syncsta & V_FR_SYNC_E1)
- hc->syncronized = 1;
- else
- hc->syncronized = 0;
- }
- /* undocumented: status changes during read */
- dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA);
- while (dch->state != (temp =
- HFC_inb_nodebug(hc, R_E1_RD_STA))) {
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG "%s: reread "
- "STATE because %d!=%d\n",
- __func__, temp,
- dch->state);
- dch->state = temp; /* repeat */
- }
- dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA)
- & 0x7;
- schedule_event(dch, FLG_PHCHANGE);
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG
- "%s: E1 (id=%d) newstate %x\n",
- __func__, hc->id, dch->state);
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
- plxsd_checksync(hc, 0);
- }
- }
- if (r_irq_misc & V_TI_IRQ)
- handle_timer_irq(hc);
-
- if (r_irq_misc & V_DTMF_IRQ) {
- /* -> DTMF IRQ */
- hfcmulti_dtmf(hc);
- }
- /* TODO: REPLACE !!!! 125 us Interrupts are not acceptable */
- if (r_irq_misc & V_IRQ_PROC) {
- /* IRQ every 125us */
- count++;
- /* generate 1kHz signal */
- if (count == 8) {
- if (hfc_interrupt)
- hfc_interrupt();
- count = 0;
- }
- }
-
- }
- if (status & V_FR_IRQSTA) {
- /* FIFO IRQ */
- r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW);
- for (i = 0; i < 8; i++) {
- if (r_irq_oview & (1 << i))
- fifo_irq(hc, i);
- }
- }
-
-#ifdef IRQ_DEBUG
- irqsem = 0;
-#endif
- spin_unlock(&hc->lock);
- return IRQ_HANDLED;
-
-irq_notforus:
-#ifdef IRQ_DEBUG
- irqsem = 0;
-#endif
- spin_unlock(&hc->lock);
- return IRQ_NONE;
-}
-
-
-/*
- * timer callback for D-chan busy resolution. Currently no function
- */
-
-static void
-hfcmulti_dbusy_timer(struct hfc_multi *hc)
-{
-}
-
-
-/*
- * activate/deactivate hardware for selected channels and mode
- *
- * configure B-channel with the given protocol
- * ch eqals to the HFC-channel (0-31)
- * ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31
- * for S/T, 1-31 for E1)
- * the hdlc interrupts will be set/unset
- */
-static int
-mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
- int bank_tx, int slot_rx, int bank_rx)
-{
- int flow_tx = 0, flow_rx = 0, routing = 0;
- int oslot_tx, oslot_rx;
- int conf;
-
- if (ch < 0 || ch > 31)
- return EINVAL;
- oslot_tx = hc->chan[ch].slot_tx;
- oslot_rx = hc->chan[ch].slot_rx;
- conf = hc->chan[ch].conf;
-
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_DEBUG
- "%s: card %d channel %d protocol %x slot old=%d new=%d "
- "bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n",
- __func__, hc->id, ch, protocol, oslot_tx, slot_tx,
- bank_tx, oslot_rx, slot_rx, bank_rx);
-
- if (oslot_tx >= 0 && slot_tx != oslot_tx) {
- /* remove from slot */
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_DEBUG "%s: remove from slot %d (TX)\n",
- __func__, oslot_tx);
- if (hc->slot_owner[oslot_tx<<1] == ch) {
- HFC_outb(hc, R_SLOT, oslot_tx << 1);
- HFC_outb(hc, A_SL_CFG, 0);
- HFC_outb(hc, A_CONF, 0);
- hc->slot_owner[oslot_tx<<1] = -1;
- } else {
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_DEBUG
- "%s: we are not owner of this tx slot "
- "anymore, channel %d is.\n",
- __func__, hc->slot_owner[oslot_tx<<1]);
- }
- }
-
- if (oslot_rx >= 0 && slot_rx != oslot_rx) {
- /* remove from slot */
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_DEBUG
- "%s: remove from slot %d (RX)\n",
- __func__, oslot_rx);
- if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) {
- HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR);
- HFC_outb(hc, A_SL_CFG, 0);
- hc->slot_owner[(oslot_rx << 1) | 1] = -1;
- } else {
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_DEBUG
- "%s: we are not owner of this rx slot "
- "anymore, channel %d is.\n",
- __func__,
- hc->slot_owner[(oslot_rx << 1) | 1]);
- }
- }
-
- if (slot_tx < 0) {
- flow_tx = 0x80; /* FIFO->ST */
- /* disable pcm slot */
- hc->chan[ch].slot_tx = -1;
- hc->chan[ch].bank_tx = 0;
- } else {
- /* set pcm slot */
- if (hc->chan[ch].txpending)
- flow_tx = 0x80; /* FIFO->ST */
- else
- flow_tx = 0xc0; /* PCM->ST */
- /* put on slot */
- routing = bank_tx ? 0xc0 : 0x80;
- if (conf >= 0 || bank_tx > 1)
- routing = 0x40; /* loop */
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
- " %d flow %02x routing %02x conf %d (TX)\n",
- __func__, ch, slot_tx, bank_tx,
- flow_tx, routing, conf);
- HFC_outb(hc, R_SLOT, slot_tx << 1);
- HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
- HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
- hc->slot_owner[slot_tx << 1] = ch;
- hc->chan[ch].slot_tx = slot_tx;
- hc->chan[ch].bank_tx = bank_tx;
- }
- if (slot_rx < 0) {
- /* disable pcm slot */
- flow_rx = 0x80; /* ST->FIFO */
- hc->chan[ch].slot_rx = -1;
- hc->chan[ch].bank_rx = 0;
- } else {
- /* set pcm slot */
- if (hc->chan[ch].txpending)
- flow_rx = 0x80; /* ST->FIFO */
- else
- flow_rx = 0xc0; /* ST->(FIFO,PCM) */
- /* put on slot */
- routing = bank_rx?0x80:0xc0; /* reversed */
- if (conf >= 0 || bank_rx > 1)
- routing = 0x40; /* loop */
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
- " %d flow %02x routing %02x conf %d (RX)\n",
- __func__, ch, slot_rx, bank_rx,
- flow_rx, routing, conf);
- HFC_outb(hc, R_SLOT, (slot_rx<<1) | V_SL_DIR);
- HFC_outb(hc, A_SL_CFG, (ch<<1) | V_CH_DIR | routing);
- hc->slot_owner[(slot_rx<<1)|1] = ch;
- hc->chan[ch].slot_rx = slot_rx;
- hc->chan[ch].bank_rx = bank_rx;
- }
-
- switch (protocol) {
- case (ISDN_P_NONE):
- /* disable TX fifo */
- HFC_outb(hc, R_FIFO, ch << 1);
- HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF);
- HFC_outb(hc, A_SUBCH_CFG, 0);
- HFC_outb(hc, A_IRQ_MSK, 0);
- HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait(hc);
- /* disable RX fifo */
- HFC_outb(hc, R_FIFO, (ch<<1)|1);
- HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00);
- HFC_outb(hc, A_SUBCH_CFG, 0);
- HFC_outb(hc, A_IRQ_MSK, 0);
- HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait(hc);
- if (hc->chan[ch].bch && hc->type != 1) {
- hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
- ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
- HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- HFC_outb(hc, A_ST_CTRL0,
- hc->hw.a_st_ctrl0[hc->chan[ch].port]);
- }
- if (hc->chan[ch].bch) {
- test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
- test_and_clear_bit(FLG_TRANSPARENT,
- &hc->chan[ch].bch->Flags);
- }
- break;
- case (ISDN_P_B_RAW): /* B-channel */
-
- if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
- (hc->chan[ch].slot_rx < 0) &&
- (hc->chan[ch].slot_tx < 0)) {
-
- printk(KERN_DEBUG
- "Setting B-channel %d to echo cancelable "
- "state on PCM slot %d\n", ch,
- ((ch / 4) * 8) + ((ch % 4) * 4) + 1);
- printk(KERN_DEBUG
- "Enabling pass through for channel\n");
- vpm_out(hc, ch, ((ch / 4) * 8) +
- ((ch % 4) * 4) + 1, 0x01);
- /* rx path */
- /* S/T -> PCM */
- HFC_outb(hc, R_FIFO, (ch << 1));
- HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
- HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
- ((ch % 4) * 4) + 1) << 1);
- HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1));
-
- /* PCM -> FIFO */
- HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1);
- HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
- HFC_outb(hc, A_SUBCH_CFG, 0);
- HFC_outb(hc, A_IRQ_MSK, 0);
- HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait(hc);
- HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
- ((ch % 4) * 4) + 1) << 1) | 1);
- HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1);
-
- /* tx path */
- /* PCM -> S/T */
- HFC_outb(hc, R_FIFO, (ch << 1) | 1);
- HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
- HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
- ((ch % 4) * 4)) << 1) | 1);
- HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1);
-
- /* FIFO -> PCM */
- HFC_outb(hc, R_FIFO, 0x20 | (ch << 1));
- HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
- HFC_outb(hc, A_SUBCH_CFG, 0);
- HFC_outb(hc, A_IRQ_MSK, 0);
- HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait(hc);
- /* tx silence */
- HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
- HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
- ((ch % 4) * 4)) << 1);
- HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
- } else {
- /* enable TX fifo */
- HFC_outb(hc, R_FIFO, ch << 1);
- HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
- V_HDLC_TRP | V_IFF);
- HFC_outb(hc, A_SUBCH_CFG, 0);
- HFC_outb(hc, A_IRQ_MSK, 0);
- HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait(hc);
- /* tx silence */
- HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
- /* enable RX fifo */
- HFC_outb(hc, R_FIFO, (ch<<1)|1);
- HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
- HFC_outb(hc, A_SUBCH_CFG, 0);
- HFC_outb(hc, A_IRQ_MSK, 0);
- HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait(hc);
- }
- if (hc->type != 1) {
- hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
- ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
- HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- HFC_outb(hc, A_ST_CTRL0,
- hc->hw.a_st_ctrl0[hc->chan[ch].port]);
- }
- if (hc->chan[ch].bch)
- test_and_set_bit(FLG_TRANSPARENT,
- &hc->chan[ch].bch->Flags);
- break;
- case (ISDN_P_B_HDLC): /* B-channel */
- case (ISDN_P_TE_S0): /* D-channel */
- case (ISDN_P_NT_S0):
- case (ISDN_P_TE_E1):
- case (ISDN_P_NT_E1):
- /* enable TX fifo */
- HFC_outb(hc, R_FIFO, ch<<1);
- HFC_wait(hc);
- if (hc->type == 1 || hc->chan[ch].bch) {
- /* E1 or B-channel */
- HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
- HFC_outb(hc, A_SUBCH_CFG, 0);
- } else {
- /* D-Channel without HDLC fill flags */
- HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF);
- HFC_outb(hc, A_SUBCH_CFG, 2);
- }
- HFC_outb(hc, A_IRQ_MSK, V_IRQ);
- HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait(hc);
- /* enable RX fifo */
- HFC_outb(hc, R_FIFO, (ch<<1)|1);
- HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
- if (hc->type == 1 || hc->chan[ch].bch)
- HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
- else
- HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
- HFC_outb(hc, A_IRQ_MSK, V_IRQ);
- HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait(hc);
- if (hc->chan[ch].bch) {
- test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
- if (hc->type != 1) {
- hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
- ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
- HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- HFC_outb(hc, A_ST_CTRL0,
- hc->hw.a_st_ctrl0[hc->chan[ch].port]);
- }
- }
- break;
- default:
- printk(KERN_DEBUG "%s: protocol not known %x\n",
- __func__, protocol);
- hc->chan[ch].protocol = ISDN_P_NONE;
- return -ENOPROTOOPT;
- }
- hc->chan[ch].protocol = protocol;
- return 0;
-}
-
-
-/*
- * connect/disconnect PCM
- */
-
-static void
-hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
- int slot_rx, int bank_rx)
-{
- if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
- /* disable PCM */
- mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
- return;
- }
-
- /* enable pcm */
- mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx,
- slot_rx, bank_rx);
-}
-
-/*
- * set/disable conference
- */
-
-static void
-hfcmulti_conf(struct hfc_multi *hc, int ch, int num)
-{
- if (num >= 0 && num <= 7)
- hc->chan[ch].conf = num;
- else
- hc->chan[ch].conf = -1;
- mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx,
- hc->chan[ch].bank_tx, hc->chan[ch].slot_rx,
- hc->chan[ch].bank_rx);
-}
-
-
-/*
- * set/disable sample loop
- */
-
-/* NOTE: this function is experimental and therefore disabled */
-
-/*
- * Layer 1 callback function
- */
-static int
-hfcm_l1callback(struct dchannel *dch, u_int cmd)
-{
- struct hfc_multi *hc = dch->hw;
- u_long flags;
-
- switch (cmd) {
- case INFO3_P8:
- case INFO3_P10:
- break;
- case HW_RESET_REQ:
- /* start activation */
- spin_lock_irqsave(&hc->lock, flags);
- if (hc->type == 1) {
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG
- "%s: HW_RESET_REQ no BRI\n",
- __func__);
- } else {
- HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */
- udelay(6); /* wait at least 5,21us */
- HFC_outb(hc, A_ST_WR_STATE, 3);
- HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT*3));
- /* activate */
- }
- spin_unlock_irqrestore(&hc->lock, flags);
- l1_event(dch->l1, HW_POWERUP_IND);
- break;
- case HW_DEACT_REQ:
- /* start deactivation */
- spin_lock_irqsave(&hc->lock, flags);
- if (hc->type == 1) {
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG
- "%s: HW_DEACT_REQ no BRI\n",
- __func__);
- } else {
- HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT*2);
- /* deactivate */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- hc->syncronized &=
- ~(1 << hc->chan[dch->slot].port);
- plxsd_checksync(hc, 0);
- }
- }
- skb_queue_purge(&dch->squeue);
- if (dch->tx_skb) {
- dev_kfree_skb(dch->tx_skb);
- dch->tx_skb = NULL;
- }
- dch->tx_idx = 0;
- if (dch->rx_skb) {
- dev_kfree_skb(dch->rx_skb);
- dch->rx_skb = NULL;
- }
- test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
- if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
- del_timer(&dch->timer);
- spin_unlock_irqrestore(&hc->lock, flags);
- break;
- case HW_POWERUP_REQ:
- spin_lock_irqsave(&hc->lock, flags);
- if (hc->type == 1) {
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG
- "%s: HW_POWERUP_REQ no BRI\n",
- __func__);
- } else {
- HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */
- udelay(6); /* wait at least 5,21us */
- HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */
- }
- spin_unlock_irqrestore(&hc->lock, flags);
- break;
- case PH_ACTIVATE_IND:
- test_and_set_bit(FLG_ACTIVE, &dch->Flags);
- _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
- GFP_ATOMIC);
- break;
- case PH_DEACTIVATE_IND:
- test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
- _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
- GFP_ATOMIC);
- break;
- default:
- if (dch->debug & DEBUG_HW)
- printk(KERN_DEBUG "%s: unknown command %x\n",
- __func__, cmd);
- return -1;
- }
- return 0;
-}
-
-/*
- * Layer2 -> Layer 1 Transfer
- */
-
-static int
-handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
-{
- struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
- struct dchannel *dch = container_of(dev, struct dchannel, dev);
- struct hfc_multi *hc = dch->hw;
- struct mISDNhead *hh = mISDN_HEAD_P(skb);
- int ret = -EINVAL;
- unsigned int id;
- u_long flags;
-
- switch (hh->prim) {
- case PH_DATA_REQ:
- if (skb->len < 1)
- break;
- spin_lock_irqsave(&hc->lock, flags);
- ret = dchannel_senddata(dch, skb);
- if (ret > 0) { /* direct TX */
- id = hh->id; /* skb can be freed */
- hfcmulti_tx(hc, dch->slot);
- ret = 0;
- /* start fifo */
- HFC_outb(hc, R_FIFO, 0);
- HFC_wait(hc);
- spin_unlock_irqrestore(&hc->lock, flags);
- queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
- } else
- spin_unlock_irqrestore(&hc->lock, flags);
- return ret;
- case PH_ACTIVATE_REQ:
- if (dch->dev.D.protocol != ISDN_P_TE_S0) {
- spin_lock_irqsave(&hc->lock, flags);
- ret = 0;
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG
- "%s: PH_ACTIVATE port %d (0..%d)\n",
- __func__, hc->chan[dch->slot].port,
- hc->ports-1);
- /* start activation */
- if (hc->type == 1) {
- ph_state_change(dch);
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG
- "%s: E1 report state %x \n",
- __func__, dch->state);
- } else {
- HFC_outb(hc, R_ST_SEL,
- hc->chan[dch->slot].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1);
- /* G1 */
- udelay(6); /* wait at least 5,21us */
- HFC_outb(hc, A_ST_WR_STATE, 1);
- HFC_outb(hc, A_ST_WR_STATE, 1 |
- (V_ST_ACT*3)); /* activate */
- dch->state = 1;
- }
- spin_unlock_irqrestore(&hc->lock, flags);
- } else
- ret = l1_event(dch->l1, hh->prim);
- break;
- case PH_DEACTIVATE_REQ:
- test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
- if (dch->dev.D.protocol != ISDN_P_TE_S0) {
- spin_lock_irqsave(&hc->lock, flags);
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG
- "%s: PH_DEACTIVATE port %d (0..%d)\n",
- __func__, hc->chan[dch->slot].port,
- hc->ports-1);
- /* start deactivation */
- if (hc->type == 1) {
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG
- "%s: PH_DEACTIVATE no BRI\n",
- __func__);
- } else {
- HFC_outb(hc, R_ST_SEL,
- hc->chan[dch->slot].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2);
- /* deactivate */
- dch->state = 1;
- }
- skb_queue_purge(&dch->squeue);
- if (dch->tx_skb) {
- dev_kfree_skb(dch->tx_skb);
- dch->tx_skb = NULL;
- }
- dch->tx_idx = 0;
- if (dch->rx_skb) {
- dev_kfree_skb(dch->rx_skb);
- dch->rx_skb = NULL;
- }
- test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
- if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
- del_timer(&dch->timer);
-#ifdef FIXME
- if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
- dchannel_sched_event(&hc->dch, D_CLEARBUSY);
-#endif
- ret = 0;
- spin_unlock_irqrestore(&hc->lock, flags);
- } else
- ret = l1_event(dch->l1, hh->prim);
- break;
- }
- if (!ret)
- dev_kfree_skb(skb);
- return ret;
-}
-
-static void
-deactivate_bchannel(struct bchannel *bch)
-{
- struct hfc_multi *hc = bch->hw;
- u_long flags;
-
- spin_lock_irqsave(&hc->lock, flags);
- if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
- dev_kfree_skb(bch->next_skb);
- bch->next_skb = NULL;
- }
- if (bch->tx_skb) {
- dev_kfree_skb(bch->tx_skb);
- bch->tx_skb = NULL;
- }
- bch->tx_idx = 0;
- if (bch->rx_skb) {
- dev_kfree_skb(bch->rx_skb);
- bch->rx_skb = NULL;
- }
- hc->chan[bch->slot].coeff_count = 0;
- test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
- test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
- hc->chan[bch->slot].rx_off = 0;
- hc->chan[bch->slot].conf = -1;
- mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
- spin_unlock_irqrestore(&hc->lock, flags);
-}
-
-static int
-handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
-{
- struct bchannel *bch = container_of(ch, struct bchannel, ch);
- struct hfc_multi *hc = bch->hw;
- int ret = -EINVAL;
- struct mISDNhead *hh = mISDN_HEAD_P(skb);
- unsigned int id;
- u_long flags;
-
- switch (hh->prim) {
- case PH_DATA_REQ:
- if (!skb->len)
- break;
- spin_lock_irqsave(&hc->lock, flags);
- ret = bchannel_senddata(bch, skb);
- if (ret > 0) { /* direct TX */
- id = hh->id; /* skb can be freed */
- hfcmulti_tx(hc, bch->slot);
- ret = 0;
- /* start fifo */
- HFC_outb_nodebug(hc, R_FIFO, 0);
- HFC_wait_nodebug(hc);
- if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) {
- spin_unlock_irqrestore(&hc->lock, flags);
- queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
- } else
- spin_unlock_irqrestore(&hc->lock, flags);
- } else
- spin_unlock_irqrestore(&hc->lock, flags);
- return ret;
- case PH_ACTIVATE_REQ:
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n",
- __func__, bch->slot);
- spin_lock_irqsave(&hc->lock, flags);
- /* activate B-channel if not already activated */
- if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
- hc->chan[bch->slot].txpending = 0;
- ret = mode_hfcmulti(hc, bch->slot,
- ch->protocol,
- hc->chan[bch->slot].slot_tx,
- hc->chan[bch->slot].bank_tx,
- hc->chan[bch->slot].slot_rx,
- hc->chan[bch->slot].bank_rx);
- if (!ret) {
- if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf
- && test_bit(HFC_CHIP_DTMF, &hc->chip)) {
- /* start decoder */
- hc->dtmf = 1;
- if (debug & DEBUG_HFCMULTI_DTMF)
- printk(KERN_DEBUG
- "%s: start dtmf decoder\n",
- __func__);
- HFC_outb(hc, R_DTMF, hc->hw.r_dtmf |
- V_RST_DTMF);
- }
- }
- } else
- ret = 0;
- spin_unlock_irqrestore(&hc->lock, flags);
- if (!ret)
- _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
- GFP_KERNEL);
- break;
- case PH_CONTROL_REQ:
- spin_lock_irqsave(&hc->lock, flags);
- switch (hh->id) {
- case HFC_SPL_LOOP_ON: /* set sample loop */
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG
- "%s: HFC_SPL_LOOP_ON (len = %d)\n",
- __func__, skb->len);
- ret = 0;
- break;
- case HFC_SPL_LOOP_OFF: /* set silence */
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n",
- __func__);
- ret = 0;
- break;
- default:
- printk(KERN_ERR
- "%s: unknown PH_CONTROL_REQ info %x\n",
- __func__, hh->id);
- ret = -EINVAL;
- }
- spin_unlock_irqrestore(&hc->lock, flags);
- break;
- case PH_DEACTIVATE_REQ:
- deactivate_bchannel(bch); /* locked there */
- _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
- GFP_KERNEL);
- ret = 0;
- break;
- }
- if (!ret)
- dev_kfree_skb(skb);
- return ret;
-}
-
-/*
- * bchannel control function
- */
-static int
-channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
-{
- int ret = 0;
- struct dsp_features *features =
- (struct dsp_features *)(*((u_long *)&cq->p1));
- struct hfc_multi *hc = bch->hw;
- int slot_tx;
- int bank_tx;
- int slot_rx;
- int bank_rx;
- int num;
-
- switch (cq->op) {
- case MISDN_CTRL_GETOP:
- cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
- | MISDN_CTRL_RX_OFF;
- break;
- case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
- hc->chan[bch->slot].rx_off = !!cq->p1;
- if (!hc->chan[bch->slot].rx_off) {
- /* reset fifo on rx on */
- HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1);
- HFC_wait_nodebug(hc);
- HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
- HFC_wait_nodebug(hc);
- }
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
- __func__, bch->nr, hc->chan[bch->slot].rx_off);
- break;
- case MISDN_CTRL_HW_FEATURES: /* fill features structure */
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG "%s: HW_FEATURE request\n",
- __func__);
- /* create confirm */
- features->hfc_id = hc->id;
- if (test_bit(HFC_CHIP_DTMF, &hc->chip))
- features->hfc_dtmf = 1;
- features->hfc_loops = 0;
- if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
- features->hfc_echocanhw = 1;
- } else {
- features->pcm_id = hc->pcm;
- features->pcm_slots = hc->slots;
- features->pcm_banks = 2;
- }
- break;
- case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */
- slot_tx = cq->p1 & 0xff;
- bank_tx = cq->p1 >> 8;
- slot_rx = cq->p2 & 0xff;
- bank_rx = cq->p2 >> 8;
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG
- "%s: HFC_PCM_CONN slot %d bank %d (TX) "
- "slot %d bank %d (RX)\n",
- __func__, slot_tx, bank_tx,
- slot_rx, bank_rx);
- if (slot_tx < hc->slots && bank_tx <= 2 &&
- slot_rx < hc->slots && bank_rx <= 2)
- hfcmulti_pcm(hc, bch->slot,
- slot_tx, bank_tx, slot_rx, bank_rx);
- else {
- printk(KERN_WARNING
- "%s: HFC_PCM_CONN slot %d bank %d (TX) "
- "slot %d bank %d (RX) out of range\n",
- __func__, slot_tx, bank_tx,
- slot_rx, bank_rx);
- ret = -EINVAL;
- }
- break;
- case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG "%s: HFC_PCM_DISC\n",
- __func__);
- hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0);
- break;
- case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */
- num = cq->p1 & 0xff;
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n",
- __func__, num);
- if (num <= 7)
- hfcmulti_conf(hc, bch->slot, num);
- else {
- printk(KERN_WARNING
- "%s: HW_CONF_JOIN conf %d out of range\n",
- __func__, num);
- ret = -EINVAL;
- }
- break;
- case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__);
- hfcmulti_conf(hc, bch->slot, -1);
- break;
- case MISDN_CTRL_HFC_ECHOCAN_ON:
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__);
- if (test_bit(HFC_CHIP_B410P, &hc->chip))
- vpm_echocan_on(hc, bch->slot, cq->p1);
- else
- ret = -EINVAL;
- break;
-
- case MISDN_CTRL_HFC_ECHOCAN_OFF:
- if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n",
- __func__);
- if (test_bit(HFC_CHIP_B410P, &hc->chip))
- vpm_echocan_off(hc, bch->slot);
- else
- ret = -EINVAL;
- break;
- default:
- printk(KERN_WARNING "%s: unknown Op %x\n",
- __func__, cq->op);
- ret = -EINVAL;
- break;
- }
- return ret;
-}
-
-static int
-hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
-{
- struct bchannel *bch = container_of(ch, struct bchannel, ch);
- struct hfc_multi *hc = bch->hw;
- int err = -EINVAL;
- u_long flags;
-
- if (bch->debug & DEBUG_HW)
- printk(KERN_DEBUG "%s: cmd:%x %p\n",
- __func__, cmd, arg);
- switch (cmd) {
- case CLOSE_CHANNEL:
- test_and_clear_bit(FLG_OPEN, &bch->Flags);
- if (test_bit(FLG_ACTIVE, &bch->Flags))
- deactivate_bchannel(bch); /* locked there */
- ch->protocol = ISDN_P_NONE;
- ch->peer = NULL;
- module_put(THIS_MODULE);
- err = 0;
- break;
- case CONTROL_CHANNEL:
- spin_lock_irqsave(&hc->lock, flags);
- err = channel_bctrl(bch, arg);
- spin_unlock_irqrestore(&hc->lock, flags);
- break;
- default:
- printk(KERN_WARNING "%s: unknown prim(%x)\n",
- __func__, cmd);
- }
- return err;
-}
-
-/*
- * handle D-channel events
- *
- * handle state change event
- */
-static void
-ph_state_change(struct dchannel *dch)
-{
- struct hfc_multi *hc = dch->hw;
- int ch, i;
-
- if (!dch) {
- printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
- __func__);
- return;
- }
- ch = dch->slot;
-
- if (hc->type == 1) {
- if (dch->dev.D.protocol == ISDN_P_TE_E1) {
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG
- "%s: E1 TE (id=%d) newstate %x\n",
- __func__, hc->id, dch->state);
- } else {
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG
- "%s: E1 NT (id=%d) newstate %x\n",
- __func__, hc->id, dch->state);
- }
- switch (dch->state) {
- case (1):
- if (hc->e1_state != 1) {
- for (i = 1; i <= 31; i++) {
- /* reset fifos on e1 activation */
- HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
- HFC_wait_nodebug(hc);
- HFC_outb_nodebug(hc,
- R_INC_RES_FIFO, V_RES_F);
- HFC_wait_nodebug(hc);
- }
- }
- test_and_set_bit(FLG_ACTIVE, &dch->Flags);
- _queue_data(&dch->dev.D, PH_ACTIVATE_IND,
- MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
- break;
-
- default:
- if (hc->e1_state != 1)
- return;
- test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
- _queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
- MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
- }
- hc->e1_state = dch->state;
- } else {
- if (dch->dev.D.protocol == ISDN_P_TE_S0) {
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG
- "%s: S/T TE newstate %x\n",
- __func__, dch->state);
- switch (dch->state) {
- case (0):
- l1_event(dch->l1, HW_RESET_IND);
- break;
- case (3):
- l1_event(dch->l1, HW_DEACT_IND);
- break;
- case (5):
- case (8):
- l1_event(dch->l1, ANYSIGNAL);
- break;
- case (6):
- l1_event(dch->l1, INFO2);
- break;
- case (7):
- l1_event(dch->l1, INFO4_P8);
- break;
- }
- } else {
- if (debug & DEBUG_HFCMULTI_STATE)
- printk(KERN_DEBUG "%s: S/T NT newstate %x\n",
- __func__, dch->state);
- switch (dch->state) {
- case (2):
- if (hc->chan[ch].nt_timer == 0) {
- hc->chan[ch].nt_timer = -1;
- HFC_outb(hc, R_ST_SEL,
- hc->chan[ch].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- HFC_outb(hc, A_ST_WR_STATE, 4 |
- V_ST_LD_STA); /* G4 */
- udelay(6); /* wait at least 5,21us */
- HFC_outb(hc, A_ST_WR_STATE, 4);
- dch->state = 4;
- } else {
- /* one extra count for the next event */
- hc->chan[ch].nt_timer =
- nt_t1_count[poll_timer] + 1;
- HFC_outb(hc, R_ST_SEL,
- hc->chan[ch].port);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- /* allow G2 -> G3 transition */
- HFC_outb(hc, A_ST_WR_STATE, 2 |
- V_SET_G2_G3);
- }
- break;
- case (1):
- hc->chan[ch].nt_timer = -1;
- test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
- _queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
- MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
- break;
- case (4):
- hc->chan[ch].nt_timer = -1;
- break;
- case (3):
- hc->chan[ch].nt_timer = -1;
- test_and_set_bit(FLG_ACTIVE, &dch->Flags);
- _queue_data(&dch->dev.D, PH_ACTIVATE_IND,
- MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
- break;
- }
- }
- }
-}
-
-/*
- * called for card mode init message
- */
-
-static void
-hfcmulti_initmode(struct dchannel *dch)
-{
- struct hfc_multi *hc = dch->hw;
- u_char a_st_wr_state, r_e1_wr_sta;
- int i, pt;
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: entered\n", __func__);
-
- if (hc->type == 1) {
- hc->chan[hc->dslot].slot_tx = -1;
- hc->chan[hc->dslot].slot_rx = -1;
- hc->chan[hc->dslot].conf = -1;
- if (hc->dslot) {
- mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol,
- -1, 0, -1, 0);
- dch->timer.function = (void *) hfcmulti_dbusy_timer;
- dch->timer.data = (long) dch;
- init_timer(&dch->timer);
- }
- for (i = 1; i <= 31; i++) {
- if (i == hc->dslot)
- continue;
- hc->chan[i].slot_tx = -1;
- hc->chan[i].slot_rx = -1;
- hc->chan[i].conf = -1;
- mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0);
- }
- /* E1 */
- if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
- HFC_outb(hc, R_LOS0, 255); /* 2 ms */
- HFC_outb(hc, R_LOS1, 255); /* 512 ms */
- }
- if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) {
- HFC_outb(hc, R_RX0, 0);
- hc->hw.r_tx0 = 0 | V_OUT_EN;
- } else {
- HFC_outb(hc, R_RX0, 1);
- hc->hw.r_tx0 = 1 | V_OUT_EN;
- }
- hc->hw.r_tx1 = V_ATX | V_NTRI;
- HFC_outb(hc, R_TX0, hc->hw.r_tx0);
- HFC_outb(hc, R_TX1, hc->hw.r_tx1);
- HFC_outb(hc, R_TX_FR0, 0x00);
- HFC_outb(hc, R_TX_FR1, 0xf8);
-
- if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
- HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E);
-
- HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0);
-
- if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
- HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC);
-
- if (dch->dev.D.protocol == ISDN_P_NT_E1) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: E1 port is NT-mode\n",
- __func__);
- r_e1_wr_sta = 0; /* G0 */
- hc->e1_getclock = 0;
- } else {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: E1 port is TE-mode\n",
- __func__);
- r_e1_wr_sta = 0; /* F0 */
- hc->e1_getclock = 1;
- }
- if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
- HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
- else
- HFC_outb(hc, R_SYNC_OUT, 0);
- if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip))
- hc->e1_getclock = 1;
- if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip))
- hc->e1_getclock = 0;
- if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
- /* SLAVE (clock master) */
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: E1 port is clock master "
- "(clock from PCM)\n", __func__);
- HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC);
- } else {
- if (hc->e1_getclock) {
- /* MASTER (clock slave) */
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: E1 port is clock slave "
- "(clock to PCM)\n", __func__);
- HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
- } else {
- /* MASTER (clock master) */
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: E1 port is "
- "clock master "
- "(clock from QUARTZ)\n",
- __func__);
- HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC |
- V_PCM_SYNC | V_JATT_OFF);
- HFC_outb(hc, R_SYNC_OUT, 0);
- }
- }
- HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */
- HFC_outb(hc, R_PWM_MD, V_PWM0_MD);
- HFC_outb(hc, R_PWM0, 0x50);
- HFC_outb(hc, R_PWM1, 0xff);
- /* state machine setup */
- HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA);
- udelay(6); /* wait at least 5,21us */
- HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta);
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- hc->syncronized = 0;
- plxsd_checksync(hc, 0);
- }
- } else {
- i = dch->slot;
- hc->chan[i].slot_tx = -1;
- hc->chan[i].slot_rx = -1;
- hc->chan[i].conf = -1;
- mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0);
- dch->timer.function = (void *)hfcmulti_dbusy_timer;
- dch->timer.data = (long) dch;
- init_timer(&dch->timer);
- hc->chan[i - 2].slot_tx = -1;
- hc->chan[i - 2].slot_rx = -1;
- hc->chan[i - 2].conf = -1;
- mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0);
- hc->chan[i - 1].slot_tx = -1;
- hc->chan[i - 1].slot_rx = -1;
- hc->chan[i - 1].conf = -1;
- mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0);
- /* ST */
- pt = hc->chan[i].port;
- /* select interface */
- HFC_outb(hc, R_ST_SEL, pt);
- /* undocumented: delay after R_ST_SEL */
- udelay(1);
- if (dch->dev.D.protocol == ISDN_P_NT_S0) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: ST port %d is NT-mode\n",
- __func__, pt);
- /* clock delay */
- HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt);
- a_st_wr_state = 1; /* G1 */
- hc->hw.a_st_ctrl0[pt] = V_ST_MD;
- } else {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: ST port %d is TE-mode\n",
- __func__, pt);
- /* clock delay */
- HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te);
- a_st_wr_state = 2; /* F2 */
- hc->hw.a_st_ctrl0[pt] = 0;
- }
- if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
- hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
- /* line setup */
- HFC_outb(hc, A_ST_CTRL0, hc->hw.a_st_ctrl0[pt]);
- /* disable E-channel */
- if ((dch->dev.D.protocol == ISDN_P_NT_S0) ||
- test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg))
- HFC_outb(hc, A_ST_CTRL1, V_E_IGNO);
- else
- HFC_outb(hc, A_ST_CTRL1, 0);
- /* enable B-channel receive */
- HFC_outb(hc, A_ST_CTRL2, V_B1_RX_EN | V_B2_RX_EN);
- /* state machine setup */
- HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA);
- udelay(6); /* wait at least 5,21us */
- HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state);
- hc->hw.r_sci_msk |= 1 << pt;
- /* state machine interrupts */
- HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk);
- /* unset sync on port */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- hc->syncronized &=
- ~(1 << hc->chan[dch->slot].port);
- plxsd_checksync(hc, 0);
- }
- }
- if (debug & DEBUG_HFCMULTI_INIT)
- printk("%s: done\n", __func__);
-}
-
-
-static int
-open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
- struct channel_req *rq)
-{
- int err = 0;
- u_long flags;
-
- if (debug & DEBUG_HW_OPEN)
- printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
- dch->dev.id, __builtin_return_address(0));
- if (rq->protocol == ISDN_P_NONE)
- return -EINVAL;
- if ((dch->dev.D.protocol != ISDN_P_NONE) &&
- (dch->dev.D.protocol != rq->protocol)) {
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_WARNING "%s: change protocol %x to %x\n",
- __func__, dch->dev.D.protocol, rq->protocol);
- }
- if ((dch->dev.D.protocol == ISDN_P_TE_S0)
- && (rq->protocol != ISDN_P_TE_S0))
- l1_event(dch->l1, CLOSE_CHANNEL);
- if (dch->dev.D.protocol != rq->protocol) {
- if (rq->protocol == ISDN_P_TE_S0) {
- err = create_l1(dch, hfcm_l1callback);
- if (err)
- return err;
- }
- dch->dev.D.protocol = rq->protocol;
- spin_lock_irqsave(&hc->lock, flags);
- hfcmulti_initmode(dch);
- spin_unlock_irqrestore(&hc->lock, flags);
- }
-
- if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) ||
- ((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) ||
- ((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) ||
- ((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) {
- _queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
- 0, NULL, GFP_KERNEL);
- }
- rq->ch = &dch->dev.D;
- if (!try_module_get(THIS_MODULE))
- printk(KERN_WARNING "%s:cannot get module\n", __func__);
- return 0;
-}
-
-static int
-open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
- struct channel_req *rq)
-{
- struct bchannel *bch;
- int ch;
-
- if (!test_bit(rq->adr.channel, &dch->dev.channelmap[0]))
- return -EINVAL;
- if (rq->protocol == ISDN_P_NONE)
- return -EINVAL;
- if (hc->type == 1)
- ch = rq->adr.channel;
- else
- ch = (rq->adr.channel - 1) + (dch->slot - 2);
- bch = hc->chan[ch].bch;
- if (!bch) {
- printk(KERN_ERR "%s:internal error ch %d has no bch\n",
- __func__, ch);
- return -EINVAL;
- }
- if (test_and_set_bit(FLG_OPEN, &bch->Flags))
- return -EBUSY; /* b-channel can be only open once */
- bch->ch.protocol = rq->protocol;
- hc->chan[ch].rx_off = 0;
- rq->ch = &bch->ch;
- if (!try_module_get(THIS_MODULE))
- printk(KERN_WARNING "%s:cannot get module\n", __func__);
- return 0;
-}
-
-/*
- * device control function
- */
-static int
-channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
-{
- int ret = 0;
-
- switch (cq->op) {
- case MISDN_CTRL_GETOP:
- cq->op = 0;
- break;
- default:
- printk(KERN_WARNING "%s: unknown Op %x\n",
- __func__, cq->op);
- ret = -EINVAL;
- break;
- }
- return ret;
-}
-
-static int
-hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
-{
- struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
- struct dchannel *dch = container_of(dev, struct dchannel, dev);
- struct hfc_multi *hc = dch->hw;
- struct channel_req *rq;
- int err = 0;
- u_long flags;
-
- if (dch->debug & DEBUG_HW)
- printk(KERN_DEBUG "%s: cmd:%x %p\n",
- __func__, cmd, arg);
- switch (cmd) {
- case OPEN_CHANNEL:
- rq = arg;
- switch (rq->protocol) {
- case ISDN_P_TE_S0:
- case ISDN_P_NT_S0:
- if (hc->type == 1) {
- err = -EINVAL;
- break;
- }
- err = open_dchannel(hc, dch, rq); /* locked there */
- break;
- case ISDN_P_TE_E1:
- case ISDN_P_NT_E1:
- if (hc->type != 1) {
- err = -EINVAL;
- break;
- }
- err = open_dchannel(hc, dch, rq); /* locked there */
- break;
- default:
- spin_lock_irqsave(&hc->lock, flags);
- err = open_bchannel(hc, dch, rq);
- spin_unlock_irqrestore(&hc->lock, flags);
- }
- break;
- case CLOSE_CHANNEL:
- if (debug & DEBUG_HW_OPEN)
- printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
- __func__, dch->dev.id,
- __builtin_return_address(0));
- module_put(THIS_MODULE);
- break;
- case CONTROL_CHANNEL:
- spin_lock_irqsave(&hc->lock, flags);
- err = channel_dctrl(dch, arg);
- spin_unlock_irqrestore(&hc->lock, flags);
- break;
- default:
- if (dch->debug & DEBUG_HW)
- printk(KERN_DEBUG "%s: unknown command %x\n",
- __func__, cmd);
- err = -EINVAL;
- }
- return err;
-}
-
-/*
- * initialize the card
- */
-
-/*
- * start timer irq, wait some time and check if we have interrupts.
- * if not, reset chip and try again.
- */
-static int
-init_card(struct hfc_multi *hc)
-{
- int err = -EIO;
- u_long flags;
- u_short *plx_acc;
- u_long plx_flags;
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: entered\n", __func__);
-
- spin_lock_irqsave(&hc->lock, flags);
- /* set interrupts but leave global interrupt disabled */
- hc->hw.r_irq_ctrl = V_FIFO_IRQ;
- disable_hwirq(hc);
- spin_unlock_irqrestore(&hc->lock, flags);
-
- if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
- "HFC-multi", hc)) {
- printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
- hc->pci_dev->irq);
- return -EIO;
- }
- hc->irq = hc->pci_dev->irq;
-
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
- writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE),
- plx_acc); /* enable PCI & LINT1 irq */
- spin_unlock_irqrestore(&plx_lock, plx_flags);
- }
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: IRQ %d count %d\n",
- __func__, hc->irq, hc->irqcnt);
- err = init_chip(hc);
- if (err)
- goto error;
- /*
- * Finally enable IRQ output
- * this is only allowed, if an IRQ routine is allready
- * established for this HFC, so don't do that earlier
- */
- spin_lock_irqsave(&hc->lock, flags);
- enable_hwirq(hc);
- spin_unlock_irqrestore(&hc->lock, flags);
- /* printk(KERN_DEBUG "no master irq set!!!\n"); */
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout((100*HZ)/1000); /* Timeout 100ms */
- /* turn IRQ off until chip is completely initialized */
- spin_lock_irqsave(&hc->lock, flags);
- disable_hwirq(hc);
- spin_unlock_irqrestore(&hc->lock, flags);
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: IRQ %d count %d\n",
- __func__, hc->irq, hc->irqcnt);
- if (hc->irqcnt) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: done\n", __func__);
-
- return 0;
- }
- if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
- printk(KERN_INFO "ignoring missing interrupts\n");
- return 0;
- }
-
- printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n",
- hc->irq);
-
- err = -EIO;
-
-error:
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
- writew(0x00, plx_acc); /*disable IRQs*/
- spin_unlock_irqrestore(&plx_lock, plx_flags);
- }
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
- if (hc->irq) {
- free_irq(hc->irq, hc);
- hc->irq = 0;
- }
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err);
- return err;
-}
-
-/*
- * find pci device and set it up
- */
-
-static int
-setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct hm_map *m = (struct hm_map *)ent->driver_data;
-
- printk(KERN_INFO
- "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
- m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
-
- hc->pci_dev = pdev;
- if (m->clock2)
- test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
-
- if (ent->device == 0xB410) {
- test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
- test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
- test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
- hc->slots = 32;
- }
-
- if (hc->pci_dev->irq <= 0) {
- printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n");
- return -EIO;
- }
- if (pci_enable_device(hc->pci_dev)) {
- printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n");
- return -EIO;
- }
- hc->leds = m->leds;
- hc->ledstate = 0xAFFEAFFE;
- hc->opticalsupport = m->opticalsupport;
-
- /* set memory access methods */
- if (m->io_mode) /* use mode from card config */
- hc->io_mode = m->io_mode;
- switch (hc->io_mode) {
- case HFC_IO_MODE_PLXSD:
- test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
- hc->slots = 128; /* required */
- /* fall through */
- case HFC_IO_MODE_PCIMEM:
- hc->HFC_outb = HFC_outb_pcimem;
- hc->HFC_inb = HFC_inb_pcimem;
- hc->HFC_inw = HFC_inw_pcimem;
- hc->HFC_wait = HFC_wait_pcimem;
- hc->read_fifo = read_fifo_pcimem;
- hc->write_fifo = write_fifo_pcimem;
- break;
- case HFC_IO_MODE_REGIO:
- hc->HFC_outb = HFC_outb_regio;
- hc->HFC_inb = HFC_inb_regio;
- hc->HFC_inw = HFC_inw_regio;
- hc->HFC_wait = HFC_wait_regio;
- hc->read_fifo = read_fifo_regio;
- hc->write_fifo = write_fifo_regio;
- break;
- default:
- printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
- hc->HFC_outb_nodebug = hc->HFC_outb;
- hc->HFC_inb_nodebug = hc->HFC_inb;
- hc->HFC_inw_nodebug = hc->HFC_inw;
- hc->HFC_wait_nodebug = hc->HFC_wait;
-#ifdef HFC_REGISTER_DEBUG
- hc->HFC_outb = HFC_outb_debug;
- hc->HFC_inb = HFC_inb_debug;
- hc->HFC_inw = HFC_inw_debug;
- hc->HFC_wait = HFC_wait_debug;
-#endif
- hc->pci_iobase = 0;
- hc->pci_membase = NULL;
- hc->plx_membase = NULL;
-
- switch (hc->io_mode) {
- case HFC_IO_MODE_PLXSD:
- hc->plx_origmembase = hc->pci_dev->resource[0].start;
- /* MEMBASE 1 is PLX PCI Bridge */
-
- if (!hc->plx_origmembase) {
- printk(KERN_WARNING
- "HFC-multi: No IO-Memory for PCI PLX bridge found\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
-
- hc->plx_membase = ioremap(hc->plx_origmembase, 0x80);
- if (!hc->plx_membase) {
- printk(KERN_WARNING
- "HFC-multi: failed to remap plx address space. "
- "(internal error)\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
- printk(KERN_INFO
- "HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n",
- (u_long)hc->plx_membase, hc->plx_origmembase);
-
- hc->pci_origmembase = hc->pci_dev->resource[2].start;
- /* MEMBASE 1 is PLX PCI Bridge */
- if (!hc->pci_origmembase) {
- printk(KERN_WARNING
- "HFC-multi: No IO-Memory for PCI card found\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
-
- hc->pci_membase = ioremap(hc->pci_origmembase, 0x400);
- if (!hc->pci_membase) {
- printk(KERN_WARNING "HFC-multi: failed to remap io "
- "address space. (internal error)\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
-
- printk(KERN_INFO
- "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d "
- "leds-type %d\n",
- hc->id, (u_long)hc->pci_membase, hc->pci_origmembase,
- hc->pci_dev->irq, HZ, hc->leds);
- pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
- break;
- case HFC_IO_MODE_PCIMEM:
- hc->pci_origmembase = hc->pci_dev->resource[1].start;
- if (!hc->pci_origmembase) {
- printk(KERN_WARNING
- "HFC-multi: No IO-Memory for PCI card found\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
-
- hc->pci_membase = ioremap(hc->pci_origmembase, 256);
- if (!hc->pci_membase) {
- printk(KERN_WARNING
- "HFC-multi: failed to remap io address space. "
- "(internal error)\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
- printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
- "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
- hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
- pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
- break;
- case HFC_IO_MODE_REGIO:
- hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
- if (!hc->pci_iobase) {
- printk(KERN_WARNING
- "HFC-multi: No IO for PCI card found\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
-
- if (!request_region(hc->pci_iobase, 8, "hfcmulti")) {
- printk(KERN_WARNING "HFC-multi: failed to request "
- "address space at 0x%08lx (internal error)\n",
- hc->pci_iobase);
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
-
- printk(KERN_INFO
- "%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n",
- m->vendor_name, m->card_name, (u_int) hc->pci_iobase,
- hc->pci_dev->irq, HZ, hc->leds);
- pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO);
- break;
- default:
- printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
-
- pci_set_drvdata(hc->pci_dev, hc);
-
- /* At this point the needed PCI config is done */
- /* fifos are still not enabled */
- return 0;
-}
-
-
-/*
- * remove port
- */
-
-static void
-release_port(struct hfc_multi *hc, struct dchannel *dch)
-{
- int pt, ci, i = 0;
- u_long flags;
- struct bchannel *pb;
-
- ci = dch->slot;
- pt = hc->chan[ci].port;
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: entered for port %d\n",
- __func__, pt + 1);
-
- if (pt >= hc->ports) {
- printk(KERN_WARNING "%s: ERROR port out of range (%d).\n",
- __func__, pt + 1);
- return;
- }
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: releasing port=%d\n",
- __func__, pt + 1);
-
- if (dch->dev.D.protocol == ISDN_P_TE_S0)
- l1_event(dch->l1, CLOSE_CHANNEL);
-
- hc->chan[ci].dch = NULL;
-
- if (hc->created[pt]) {
- hc->created[pt] = 0;
- mISDN_unregister_device(&dch->dev);
- }
-
- spin_lock_irqsave(&hc->lock, flags);
-
- if (dch->timer.function) {
- del_timer(&dch->timer);
- dch->timer.function = NULL;
- }
-
- if (hc->type == 1) { /* E1 */
- /* remove sync */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- hc->syncronized = 0;
- plxsd_checksync(hc, 1);
- }
- /* free channels */
- for (i = 0; i <= 31; i++) {
- if (hc->chan[i].bch) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: free port %d channel %d\n",
- __func__, hc->chan[i].port+1, i);
- pb = hc->chan[i].bch;
- hc->chan[i].bch = NULL;
- spin_unlock_irqrestore(&hc->lock, flags);
- mISDN_freebchannel(pb);
- kfree(pb);
- kfree(hc->chan[i].coeff);
- spin_lock_irqsave(&hc->lock, flags);
- }
- }
- } else {
- /* remove sync */
- if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- hc->syncronized &=
- ~(1 << hc->chan[ci].port);
- plxsd_checksync(hc, 1);
- }
- /* free channels */
- if (hc->chan[ci - 2].bch) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: free port %d channel %d\n",
- __func__, hc->chan[ci - 2].port+1,
- ci - 2);
- pb = hc->chan[ci - 2].bch;
- hc->chan[ci - 2].bch = NULL;
- spin_unlock_irqrestore(&hc->lock, flags);
- mISDN_freebchannel(pb);
- kfree(pb);
- kfree(hc->chan[ci - 2].coeff);
- spin_lock_irqsave(&hc->lock, flags);
- }
- if (hc->chan[ci - 1].bch) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: free port %d channel %d\n",
- __func__, hc->chan[ci - 1].port+1,
- ci - 1);
- pb = hc->chan[ci - 1].bch;
- hc->chan[ci - 1].bch = NULL;
- spin_unlock_irqrestore(&hc->lock, flags);
- mISDN_freebchannel(pb);
- kfree(pb);
- kfree(hc->chan[ci - 1].coeff);
- spin_lock_irqsave(&hc->lock, flags);
- }
- }
-
- spin_unlock_irqrestore(&hc->lock, flags);
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt);
- mISDN_freedchannel(dch);
- kfree(dch);
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: done!\n", __func__);
-}
-
-static void
-release_card(struct hfc_multi *hc)
-{
- u_long flags;
- int ch;
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: release card (%d) entered\n",
- __func__, hc->id);
-
- spin_lock_irqsave(&hc->lock, flags);
- disable_hwirq(hc);
- spin_unlock_irqrestore(&hc->lock, flags);
-
- udelay(1000);
-
- /* dimm leds */
- if (hc->leds)
- hfcmulti_leds(hc);
-
- /* disable D-channels & B-channels */
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: disable all channels (d and b)\n",
- __func__);
- for (ch = 0; ch <= 31; ch++) {
- if (hc->chan[ch].dch)
- release_port(hc, hc->chan[ch].dch);
- }
-
- /* release hardware & irq */
- if (hc->irq) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: free irq %d\n",
- __func__, hc->irq);
- free_irq(hc->irq, hc);
- hc->irq = 0;
-
- }
- release_io_hfcmulti(hc);
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: remove instance from list\n",
- __func__);
- list_del(&hc->list);
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: delete instance\n", __func__);
- if (hc == syncmaster)
- syncmaster = NULL;
- kfree(hc);
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: card successfully removed\n",
- __func__);
-}
-
-static int
-init_e1_port(struct hfc_multi *hc, struct hm_map *m)
-{
- struct dchannel *dch;
- struct bchannel *bch;
- int ch, ret = 0;
- char name[MISDN_MAX_IDLEN];
-
- dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
- if (!dch)
- return -ENOMEM;
- dch->debug = debug;
- mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
- dch->hw = hc;
- dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
- dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
- (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
- dch->dev.D.send = handle_dmsg;
- dch->dev.D.ctrl = hfcm_dctrl;
- dch->dev.nrbchan = (hc->dslot)?30:31;
- dch->slot = hc->dslot;
- hc->chan[hc->dslot].dch = dch;
- hc->chan[hc->dslot].port = 0;
- hc->chan[hc->dslot].nt_timer = -1;
- for (ch = 1; ch <= 31; ch++) {
- if (ch == hc->dslot) /* skip dchannel */
- continue;
- bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
- if (!bch) {
- printk(KERN_ERR "%s: no memory for bchannel\n",
- __func__);
- ret = -ENOMEM;
- goto free_chan;
- }
- hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL);
- if (!hc->chan[ch].coeff) {
- printk(KERN_ERR "%s: no memory for coeffs\n",
- __func__);
- ret = -ENOMEM;
- goto free_chan;
- }
- bch->nr = ch;
- bch->slot = ch;
- bch->debug = debug;
- mISDN_initbchannel(bch, MAX_DATA_MEM);
- bch->hw = hc;
- bch->ch.send = handle_bmsg;
- bch->ch.ctrl = hfcm_bctrl;
- bch->ch.nr = ch;
- list_add(&bch->ch.list, &dch->dev.bchannels);
- hc->chan[ch].bch = bch;
- hc->chan[ch].port = 0;
- test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
- }
- /* set optical line type */
- if (port[Port_cnt] & 0x001) {
- if (!m->opticalsupport) {
- printk(KERN_INFO
- "This board has no optical "
- "support\n");
- } else {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: PORT set optical "
- "interfacs: card(%d) "
- "port(%d)\n",
- __func__,
- HFC_cnt + 1, 1);
- test_and_set_bit(HFC_CFG_OPTICAL,
- &hc->chan[hc->dslot].cfg);
- }
- }
- /* set LOS report */
- if (port[Port_cnt] & 0x004) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: PORT set "
- "LOS report: card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, 1);
- test_and_set_bit(HFC_CFG_REPORT_LOS,
- &hc->chan[hc->dslot].cfg);
- }
- /* set AIS report */
- if (port[Port_cnt] & 0x008) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: PORT set "
- "AIS report: card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, 1);
- test_and_set_bit(HFC_CFG_REPORT_AIS,
- &hc->chan[hc->dslot].cfg);
- }
- /* set SLIP report */
- if (port[Port_cnt] & 0x010) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: PORT set SLIP report: "
- "card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, 1);
- test_and_set_bit(HFC_CFG_REPORT_SLIP,
- &hc->chan[hc->dslot].cfg);
- }
- /* set RDI report */
- if (port[Port_cnt] & 0x020) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: PORT set RDI report: "
- "card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, 1);
- test_and_set_bit(HFC_CFG_REPORT_RDI,
- &hc->chan[hc->dslot].cfg);
- }
- /* set CRC-4 Mode */
- if (!(port[Port_cnt] & 0x100)) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: PORT turn on CRC4 report:"
- " card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, 1);
- test_and_set_bit(HFC_CFG_CRC4,
- &hc->chan[hc->dslot].cfg);
- } else {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: PORT turn off CRC4"
- " report: card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, 1);
- }
- /* set forced clock */
- if (port[Port_cnt] & 0x0200) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: PORT force getting clock from "
- "E1: card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, 1);
- test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip);
- } else
- if (port[Port_cnt] & 0x0400) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: PORT force putting clock to "
- "E1: card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, 1);
- test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip);
- }
- /* set JATT PLL */
- if (port[Port_cnt] & 0x0800) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: PORT disable JATT PLL on "
- "E1: card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, 1);
- test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip);
- }
- /* set elastic jitter buffer */
- if (port[Port_cnt] & 0x3000) {
- hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3;
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: PORT set elastic "
- "buffer to %d: card(%d) port(%d)\n",
- __func__, hc->chan[hc->dslot].jitter,
- HFC_cnt + 1, 1);
- } else
- hc->chan[hc->dslot].jitter = 2; /* default */
- snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
- ret = mISDN_register_device(&dch->dev, name);
- if (ret)
- goto free_chan;
- hc->created[0] = 1;
- return ret;
-free_chan:
- release_port(hc, dch);
- return ret;
-}
-
-static int
-init_multi_port(struct hfc_multi *hc, int pt)
-{
- struct dchannel *dch;
- struct bchannel *bch;
- int ch, i, ret = 0;
- char name[MISDN_MAX_IDLEN];
-
- dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
- if (!dch)
- return -ENOMEM;
- dch->debug = debug;
- mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
- dch->hw = hc;
- dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
- dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
- (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
- dch->dev.D.send = handle_dmsg;
- dch->dev.D.ctrl = hfcm_dctrl;
- dch->dev.nrbchan = 2;
- i = pt << 2;
- dch->slot = i + 2;
- hc->chan[i + 2].dch = dch;
- hc->chan[i + 2].port = pt;
- hc->chan[i + 2].nt_timer = -1;
- for (ch = 0; ch < dch->dev.nrbchan; ch++) {
- bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
- if (!bch) {
- printk(KERN_ERR "%s: no memory for bchannel\n",
- __func__);
- ret = -ENOMEM;
- goto free_chan;
- }
- hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL);
- if (!hc->chan[i + ch].coeff) {
- printk(KERN_ERR "%s: no memory for coeffs\n",
- __func__);
- ret = -ENOMEM;
- goto free_chan;
- }
- bch->nr = ch + 1;
- bch->slot = i + ch;
- bch->debug = debug;
- mISDN_initbchannel(bch, MAX_DATA_MEM);
- bch->hw = hc;
- bch->ch.send = handle_bmsg;
- bch->ch.ctrl = hfcm_bctrl;
- bch->ch.nr = ch + 1;
- list_add(&bch->ch.list, &dch->dev.bchannels);
- hc->chan[i + ch].bch = bch;
- hc->chan[i + ch].port = pt;
- test_and_set_bit(bch->nr, &dch->dev.channelmap[0]);
- }
- /* set master clock */
- if (port[Port_cnt] & 0x001) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: PROTOCOL set master clock: "
- "card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, pt + 1);
- if (dch->dev.D.protocol != ISDN_P_TE_S0) {
- printk(KERN_ERR "Error: Master clock "
- "for port(%d) of card(%d) is only"
- " possible with TE-mode\n",
- pt + 1, HFC_cnt + 1);
- ret = -EINVAL;
- goto free_chan;
- }
- if (hc->masterclk >= 0) {
- printk(KERN_ERR "Error: Master clock "
- "for port(%d) of card(%d) already "
- "defined for port(%d)\n",
- pt + 1, HFC_cnt + 1, hc->masterclk+1);
- ret = -EINVAL;
- goto free_chan;
- }
- hc->masterclk = pt;
- }
- /* set transmitter line to non capacitive */
- if (port[Port_cnt] & 0x002) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: PROTOCOL set non capacitive "
- "transmitter: card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, pt + 1);
- test_and_set_bit(HFC_CFG_NONCAP_TX,
- &hc->chan[i + 2].cfg);
- }
- /* disable E-channel */
- if (port[Port_cnt] & 0x004) {
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: PROTOCOL disable E-channel: "
- "card(%d) port(%d)\n",
- __func__, HFC_cnt + 1, pt + 1);
- test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
- &hc->chan[i + 2].cfg);
- }
- snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d/%d",
- hc->type, HFC_cnt + 1, pt + 1);
- ret = mISDN_register_device(&dch->dev, name);
- if (ret)
- goto free_chan;
- hc->created[pt] = 1;
- return ret;
-free_chan:
- release_port(hc, dch);
- return ret;
-}
-
-static int
-hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- struct hm_map *m = (struct hm_map *)ent->driver_data;
- int ret_err = 0;
- int pt;
- struct hfc_multi *hc;
- u_long flags;
- u_char dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
-
- if (HFC_cnt >= MAX_CARDS) {
- printk(KERN_ERR "too many cards (max=%d).\n",
- MAX_CARDS);
- return -EINVAL;
- }
- if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) {
- printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but "
- "type[%d] %d was supplied as module parameter\n",
- m->vendor_name, m->card_name, m->type, HFC_cnt,
- type[HFC_cnt] & 0xff);
- printk(KERN_WARNING "HFC-MULTI: Load module without parameters "
- "first, to see cards and their types.");
- return -EINVAL;
- }
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n",
- __func__, m->vendor_name, m->card_name, m->type,
- type[HFC_cnt]);
-
- /* allocate card+fifo structure */
- hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL);
- if (!hc) {
- printk(KERN_ERR "No kmem for HFC-Multi card\n");
- return -ENOMEM;
- }
- spin_lock_init(&hc->lock);
- hc->mtyp = m;
- hc->type = m->type;
- hc->ports = m->ports;
- hc->id = HFC_cnt;
- hc->pcm = pcm[HFC_cnt];
- hc->io_mode = iomode[HFC_cnt];
- if (dslot[HFC_cnt] < 0) {
- hc->dslot = 0;
- printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
- "31 B-channels\n");
- } if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32) {
- hc->dslot = dslot[HFC_cnt];
- printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
- "time slot %d\n", dslot[HFC_cnt]);
- } else
- hc->dslot = 16;
-
- /* set chip specific features */
- hc->masterclk = -1;
- if (type[HFC_cnt] & 0x100) {
- test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
- silence = 0xff; /* ulaw silence */
- } else
- silence = 0x2a; /* alaw silence */
- if (!(type[HFC_cnt] & 0x200))
- test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
-
- if (type[HFC_cnt] & 0x800)
- test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
- if (type[HFC_cnt] & 0x1000) {
- test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
- test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
- }
- if (type[HFC_cnt] & 0x4000)
- test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip);
- if (type[HFC_cnt] & 0x8000)
- test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip);
- hc->slots = 32;
- if (type[HFC_cnt] & 0x10000)
- hc->slots = 64;
- if (type[HFC_cnt] & 0x20000)
- hc->slots = 128;
- if (type[HFC_cnt] & 0x80000) {
- test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip);
- hc->wdcount = 0;
- hc->wdbyte = V_GPIO_OUT2;
- printk(KERN_NOTICE "Watchdog enabled\n");
- }
-
- /* setup pci, hc->slots may change due to PLXSD */
- ret_err = setup_pci(hc, pdev, ent);
- if (ret_err) {
- if (hc == syncmaster)
- syncmaster = NULL;
- kfree(hc);
- return ret_err;
- }
-
- /* crate channels */
- for (pt = 0; pt < hc->ports; pt++) {
- if (Port_cnt >= MAX_PORTS) {
- printk(KERN_ERR "too many ports (max=%d).\n",
- MAX_PORTS);
- ret_err = -EINVAL;
- goto free_card;
- }
- if (hc->type == 1)
- ret_err = init_e1_port(hc, m);
- else
- ret_err = init_multi_port(hc, pt);
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG
- "%s: Registering D-channel, card(%d) port(%d)"
- "result %d\n",
- __func__, HFC_cnt + 1, pt, ret_err);
-
- if (ret_err) {
- while (pt) { /* release already registered ports */
- pt--;
- release_port(hc, hc->chan[(pt << 2) + 2].dch);
- }
- goto free_card;
- }
- Port_cnt++;
- }
-
- /* disp switches */
- switch (m->dip_type) {
- case DIP_4S:
- /*
- * get DIP Setting for beroNet 1S/2S/4S cards
- * check if Port Jumper config matches
- * module param 'protocol'
- * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
- * GPI 19/23 (R_GPI_IN2))
- */
- dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) |
- ((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) |
- (~HFC_inb(hc, R_GPI_IN2) & 0x08);
-
- /* Port mode (TE/NT) jumpers */
- pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4) & 0xf);
-
- if (test_bit(HFC_CHIP_B410P, &hc->chip))
- pmj = ~pmj & 0xf;
-
- printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n",
- m->vendor_name, m->card_name, dips, pmj);
- break;
- case DIP_8S:
- /*
- * get DIP Setting for beroNet 8S0+ cards
- *
- * enable PCI auxbridge function
- */
- HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
- /* prepare access to auxport */
- outw(0x4000, hc->pci_iobase + 4);
- /*
- * some dummy reads are required to
- * read valid DIP switch data
- */
- dips = inb(hc->pci_iobase);
- dips = inb(hc->pci_iobase);
- dips = inb(hc->pci_iobase);
- dips = ~inb(hc->pci_iobase) & 0x3F;
- outw(0x0, hc->pci_iobase + 4);
- /* disable PCI auxbridge function */
- HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
- printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
- m->vendor_name, m->card_name, dips);
- break;
- case DIP_E1:
- /*
- * get DIP Setting for beroNet E1 cards
- * DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0)
- */
- dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0)>>4;
- printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
- m->vendor_name, m->card_name, dips);
- break;
- }
-
- /* add to list */
- spin_lock_irqsave(&HFClock, flags);
- list_add_tail(&hc->list, &HFClist);
- spin_unlock_irqrestore(&HFClock, flags);
-
- /* initialize hardware */
- ret_err = init_card(hc);
- if (ret_err) {
- printk(KERN_ERR "init card returns %d\n", ret_err);
- release_card(hc);
- return ret_err;
- }
-
- /* start IRQ and return */
- spin_lock_irqsave(&hc->lock, flags);
- enable_hwirq(hc);
- spin_unlock_irqrestore(&hc->lock, flags);
- return 0;
-
-free_card:
- release_io_hfcmulti(hc);
- if (hc == syncmaster)
- syncmaster = NULL;
- kfree(hc);
- return ret_err;
-}
-
-static void __devexit hfc_remove_pci(struct pci_dev *pdev)
-{
- struct hfc_multi *card = pci_get_drvdata(pdev);
- u_long flags;
-
- if (debug)
- printk(KERN_INFO "removing hfc_multi card vendor:%x "
- "device:%x subvendor:%x subdevice:%x\n",
- pdev->vendor, pdev->device,
- pdev->subsystem_vendor, pdev->subsystem_device);
-
- if (card) {
- spin_lock_irqsave(&HFClock, flags);
- release_card(card);
- spin_unlock_irqrestore(&HFClock, flags);
- } else {
- if (debug)
- printk(KERN_WARNING "%s: drvdata allready removed\n",
- __func__);
- }
-}
-
-#define VENDOR_CCD "Cologne Chip AG"
-#define VENDOR_BN "beroNet GmbH"
-#define VENDOR_DIG "Digium Inc."
-#define VENDOR_JH "Junghanns.NET GmbH"
-#define VENDOR_PRIM "PrimuX"
-
-static const struct hm_map hfcm_map[] = {
-/*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
-/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S},
-/*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
-/*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
-/*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
-/*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
-/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, 0, 0},
-/*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
-/*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
-/*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
-/*10*/ {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
-/*11*/ {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
-
-/*12*/ {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
-/*13*/ {VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
- HFC_IO_MODE_REGIO},
-/*14*/ {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
-/*15*/ {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
-
-/*16*/ {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
-/*17*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
-/*18*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
-
-/*19*/ {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
-/*20*/ {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
-/*21*/ {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
-/*22*/ {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
-
-/*23*/ {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
-/*24*/ {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
-/*25*/ {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
-
-/*26*/ {VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
- HFC_IO_MODE_PLXSD},
-/*27*/ {VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
- HFC_IO_MODE_PLXSD},
-/*28*/ {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
-/*29*/ {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
-/*30*/ {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
-};
-
-#undef H
-#define H(x) ((unsigned long)&hfcm_map[x])
-static struct pci_device_id hfmultipci_ids[] __devinitdata = {
-
- /* Cards with HFC-4S Chip */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */
- { PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S,
- PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)},
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)},
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
-
- /* Cards with HFC-8S Chip */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)},
- /* IOB8ST Recording */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
-
-
- /* Cards with HFC-E1 Chip */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */
-
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
- PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */
-
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
- { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
- 0, 0, 0},
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
- 0, 0, 0},
- { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_ANY_ID, PCI_ANY_ID,
- 0, 0, 0},
- {0, }
-};
-#undef H
-
-MODULE_DEVICE_TABLE(pci, hfmultipci_ids);
-
-static int
-hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- struct hm_map *m = (struct hm_map *)ent->driver_data;
- int ret;
-
- if (m == NULL) {
- if (ent->vendor == PCI_VENDOR_ID_CCD)
- if (ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
- ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
- ent->device == PCI_DEVICE_ID_CCD_HFCE1)
- printk(KERN_ERR
- "unknown HFC multiport controller "
- "(vendor:%x device:%x subvendor:%x "
- "subdevice:%x) Please contact the "
- "driver maintainer for support.\n",
- ent->vendor, ent->device,
- ent->subvendor, ent->subdevice);
- return -ENODEV;
- }
- ret = hfcmulti_init(pdev, ent);
- if (ret)
- return ret;
- HFC_cnt++;
- printk(KERN_INFO "%d devices registered\n", HFC_cnt);
- return 0;
-}
-
-static struct pci_driver hfcmultipci_driver = {
- .name = "hfc_multi",
- .probe = hfcmulti_probe,
- .remove = __devexit_p(hfc_remove_pci),
- .id_table = hfmultipci_ids,
-};
-
-static void __exit
-HFCmulti_cleanup(void)
-{
- struct hfc_multi *card, *next;
-
- /* unload interrupt function symbol */
- if (hfc_interrupt)
- symbol_put(ztdummy_extern_interrupt);
- if (register_interrupt)
- symbol_put(ztdummy_register_interrupt);
- if (unregister_interrupt) {
- if (interrupt_registered) {
- interrupt_registered = 0;
- unregister_interrupt();
- }
- symbol_put(ztdummy_unregister_interrupt);
- }
-
- list_for_each_entry_safe(card, next, &HFClist, list)
- release_card(card);
- /* get rid of all devices of this driver */
- pci_unregister_driver(&hfcmultipci_driver);
-}
-
-static int __init
-HFCmulti_init(void)
-{
- int err;
-
-#ifdef IRQ_DEBUG
- printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
-#endif
-
- spin_lock_init(&HFClock);
- spin_lock_init(&plx_lock);
-
- if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_DEBUG "%s: init entered\n", __func__);
-
-#ifdef __BIG_ENDIAN
-#error "not running on big endian machines now"
-#endif
- hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
- register_interrupt = symbol_get(ztdummy_register_interrupt);
- unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
- printk(KERN_INFO "mISDN: HFC-multi driver %s\n",
- hfcmulti_revision);
-
- switch (poll) {
- case 0:
- poll_timer = 6;
- poll = 128;
- break;
- /*
- * wenn dieses break nochmal verschwindet,
- * gibt es heisse ohren :-)
- * "without the break you will get hot ears ???"
- */
- case 8:
- poll_timer = 2;
- break;
- case 16:
- poll_timer = 3;
- break;
- case 32:
- poll_timer = 4;
- break;
- case 64:
- poll_timer = 5;
- break;
- case 128:
- poll_timer = 6;
- break;
- case 256:
- poll_timer = 7;
- break;
- default:
- printk(KERN_ERR
- "%s: Wrong poll value (%d).\n", __func__, poll);
- err = -EINVAL;
- return err;
-
- }
-
- err = pci_register_driver(&hfcmultipci_driver);
- if (err < 0) {
- printk(KERN_ERR "error registering pci driver: %x\n", err);
- if (hfc_interrupt)
- symbol_put(ztdummy_extern_interrupt);
- if (register_interrupt)
- symbol_put(ztdummy_register_interrupt);
- if (unregister_interrupt) {
- if (interrupt_registered) {
- interrupt_registered = 0;
- unregister_interrupt();
- }
- symbol_put(ztdummy_unregister_interrupt);
- }
- return err;
- }
- return 0;
-}
-
-
-module_init(HFCmulti_init);
-module_exit(HFCmulti_cleanup);

--
David Woodhouse Open Source Technology Centre
David.Woodhouse@xxxxxxxxx Intel Corporation

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Peter Oruba: "Re: [patch 0/4] x86: AMD microcode patch loading v2 fixes"
Previous message: Andrew Morton: "Re: BUG: unable to handle kernel NULL pointer dereference at00000002"
Next in thread: Karsten Keil: "Re: [PATCH] Remove broken hfcmulti driver."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]