Re: libata badness

From: Ben Dooks
Date: Thu Jul 31 2008 - 15:03:22 EST

Next message: Dmitry Torokhov: "Re: linux-next: Tree for July 30"
Previous message: Linus Torvalds: "Re: [patch v3] splice: fix race with page invalidation"
In reply to: Kumar Gala: "libata badness"
Next in thread: Kumar Gala: "Re: libata badness"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, Jul 31, 2008 at 01:53:45PM -0500, Kumar Gala wrote:
> I'm getting the following badness with top of tree on a embedded
> PowerPC w/a ULI 1575 bridge (M5229 IDE):
>
> 02:1f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c8)
>
> If you need more info let me know.
>
> - k
>
> ahci 0000:02:1f.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl
> SATA mode
> ahci 0000:02:1f.1: flags: ncq sntf ilck pm led clo pmp pio slum part
> ------------[ cut here ]------------
> Badness at c021e700 [verbose debug info unavailable]

it would be helpful to compile a kernel with verbose fault information
turned on.

> NIP: c021e700 LR: c021e6e8 CTR: c022ce90
> REGS: ef82bca0 TRAP: 0700 Not tainted (2.6.27-rc1-00495-g33bd9fe-
> dirty)
> MSR: 00029032 <EE,ME,IR,DR> CR: 22044022 XER: 20000000
> TASK = ef830000[1] 'swapper' THREAD: ef82a000 CPU: 1
> GPR00: 00000001 ef82bd50 ef830000 00000000 00009032 00000000 ef0b64fc
> 00000000
> GPR08: ef937c10 c022f93f efbfc8e0 ef900b60 22044028 fffdd3ff 0ffe8700
> c044c17c
> GPR16: c04d52ec ef82f458 ef82f4f4 ef82f4f4 c044c234 c044c5d8 c044c5d8
> c044c220
> GPR24: c044c218 c04d52f0 00000080 c022f940 00000000 c044c244 efbec490
> 00000000
> NIP [c021e700] ata_host_activate+0x40/0x10c
> LR [c021e6e8] ata_host_activate+0x28/0x10c
> Call Trace:
> [ef82bd50] [c021e6e8] ata_host_activate+0x28/0x10c (unreliable)
> [ef82bd80] [c022f48c] ahci_init_one+0x8b4/0xd68
> [ef82be30] [c01b69c0] pci_device_probe+0x84/0xa8
> [ef82be50] [c01e5438] driver_probe_device+0xb4/0x1e8
> [ef82be70] [c01e55f0] __driver_attach+0x84/0x88
> [ef82be90] [c01e4ba0] bus_for_each_dev+0x5c/0xa4
> [ef82bec0] [c01e5254] driver_attach+0x24/0x34
> [ef82bed0] [c01e44b8] bus_add_driver+0x1d8/0x24c
> [ef82bef0] [c01e5810] driver_register+0x70/0x160
> [ef82bf10] [c01b6c54] __pci_register_driver+0x64/0xc4
> [ef82bf30] [c04aaa60] ahci_init+0x28/0x38
> [ef82bf40] [c048717c] do_one_initcall+0x38/0x1ac
> [ef82bfb0] [c04874e0] kernel_init+0x1f0/0x1fc
> [ef82bff0] [c0013b04] kernel_thread+0x44/0x60
> Instruction dump:
> 7cbb2b78 90010034 7cda3378 7cf93b78 7c7e1b78 4bff9dbd 7c7f1b79 408200c8
> 2f9c0000 409e002c 313bffff 7c09d910 <0f000000> 80010034 7fc3f378
> 7f24cb78
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> ata1: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006100
> ata2: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006180
> ata3: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006200
> ata4: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006280
> ata1: SATA link down (SStatus 0 SControl 300)
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: qc timeout (cmd 0xec)
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: qc timeout (cmd 0xec)
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: qc timeout (cmd 0xec)
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata3: SATA link down (SStatus 0 SControl 300)
> ata4: SATA link down (SStatus 0 SControl 300)
> scsi4 : pata_ali
> scsi5 : pata_ali
> ata5: PATA max UDMA/133 cmd 0x1200 ctl 0x1208 bmdma 0x1220
> ata6: PATA max UDMA/133 cmd 0x1210 ctl 0x1218 bmdma 0x1228

Looks like you're running into the same problem as I did, with the
fact that the M5529 is in native mode, but doesn't have any IRQ
available. Do you know if the bridge chip in it is in routes the
IRQs internally?

> ata5.00: ATAPI: TSSTcorp CDW/DVD SH-M522C, TS06, max UDMA/33
> ata5.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be
> enabled
> ata5.00: WARNING: via pata_ali.atapi_dma modparam or corresponding
> sysfs node.
> ata5.00: configured for UDMA/33
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for UDMA/33
> ata5: EH complete
> ata5.00: limiting speed to UDMA/25:PIO4
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for UDMA/25
> ata5: EH complete
> ata5.00: limiting speed to PIO4
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO4
> ata5: EH complete
> ata5.00: limiting speed to PIO3
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO3
> ata5: EH complete
> ata5.00: limiting speed to PIO0
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
> cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata5.00: status: { DRDY }
> ata5: soft resetting link
> ata5.00: configured for PIO0
> ata5: EH complete
> ata5: WARNING: synchronous SCSI scan failed without making any progress,
> switching to async
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
--
Ben

Q: What's a light-year?
A: One-third less calories than a regular year.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Dmitry Torokhov: "Re: linux-next: Tree for July 30"
Previous message: Linus Torvalds: "Re: [patch v3] splice: fix race with page invalidation"
In reply to: Kumar Gala: "libata badness"
Next in thread: Kumar Gala: "Re: libata badness"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]