Re: 2.6.27rc1 cannot boot more than 8CPUs
From: Jeff Chua
Date: Sun Aug 17 2008 - 23:07:28 EST
On Fri, Aug 15, 2008 at 10:07 PM, Ingo Molnar <mingo@xxxxxxx> wrote:
> thanks. To make sure it's all sorted out you might want to boot today's
> tip/master and check whether it just does the right thing by default.
> (it really should)
Yes, verified and it's working now. The warnings show up.
Short dmesg here. Detailed dmesg attached.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
More than 8 CPUs detected - skipping them.
Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b
CPU 1 irqstacks, hard=c0527000 soft=c0517000
Booting processor 1/8 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3723.84 BogoMIPS (lpj=7447688)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
Thank you YingHai and Ingo for your great help! Sorry it look at while to reply.
Jeff.
Linux version 2.6.27-rc3 (root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.2.2) #2 SMP PREEMPT Mon Aug 18 10:31:19 SGT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000007fab0000 (usable)
BIOS-e820: 000000007fab0000 - 000000007fac4000 (reserved)
BIOS-e820: 000000007fac4000 - 000000007fac6000 (usable)
BIOS-e820: 000000007fac6000 - 000000007fad5c00 (ACPI data)
BIOS-e820: 000000007fad5c00 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000880000000 (usable)
last_pfn = 0x880000 max_arch_pfn = 0x1000000
kernel direct mapping tables up to 38000000 @ 7000-c000
NX (Execute Disable) protection: active
DMI 2.5 present.
ACPI: RSDP 000F26F0, 0024 (r2 DELL )
ACPI: XSDT 000F27E8, 007C (r1 DELL PE_SC3 1 DELL 1)
ACPI: FACP 000F29E0, 00F4 (r3 DELL PE_SC3 1 DELL 1)
ACPI: DSDT 7FAC6000, 2ECB (r1 DELL PE_SC3 1 INTL 20050624)
ACPI: FACS 7FAD5C00, 0040
ACPI: APIC 000F2AD4, 015E (r1 DELL PE_SC3 1 DELL 1)
ACPI: SPCR 000F2C33, 0050 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HPET 000F2C83, 0038 (r1 DELL PE_SC3 1 DELL 1)
ACPI: MCFG 000F2CBB, 003C (r1 DELL PE_SC3 1 DELL 1)
ACPI: SLIC 000F2CF7, 0024 (r1 DELL PE_SC3 1 DELL 1)
ACPI: ERST 7FAC904C, 0210 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HEST 7FAC925C, 027C (r1 DELL PE_SC3 1 DELL 1)
ACPI: BERT 7FAC8ECC, 0030 (r1 DELL PE_SC3 1 DELL 1)
ACPI: EINJ 7FAC8EFC, 0150 (r1 DELL PE_SC3 1 DELL 1)
ACPI: TCPA 000F2E79, 0064 (r1 DELL PE_SC3 1 DELL 1)
33920MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00008000 - 0000f000
(8 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005dcd28] TEXT DATA BSS ==> [0000100000 - 00005dcd28]
#4 [00005dd000 - 00005e5000] INIT_PG_TABLE ==> [00005dd000 - 00005e5000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x00880000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x000000a0
0: 0x00000100 -> 0x0007fab0
0: 0x0007fac4 -> 0x0007fac6
0: 0x00100000 -> 0x00880000
On node 0 totalpages: 8387154
DMA zone: 3968 pages, LIFO batch:0
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 8090034 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x1a] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x19] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x1b] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x1f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x20] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x22] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x28] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x29] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x2a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x2c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x2e] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec81000] gsi_base[32])
IOAPIC[1]: apic_id 7, version 32, address 0xfec81000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
mapped IOAPIC to ffff9000 (fec81000)
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
PERCPU: Allocating 39684 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 16, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8317522
Kernel command line: BOOT_IMAGE=(hd0,14)/safe/bzc1 root=/dev/sda2 resume=/dev/sda3 reboot=bios maxcpus=8
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
CPU 0 irqstacks, hard=c0526000 soft=c0516000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
Detected 1861.912 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 33262724k/35651584k available (2654k kernel code, 285080k reserved, 1241k data, 260k init, 32631496k highmem)
virtual kernel memory layout:
fixmap : 0xffee9000 - 0xfffff000 (1112 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04d2000 - 0xc0513000 ( 260 kB)
.data : 0xc0397a33 - 0xc04cde88 (1241 kB)
.text : 0xc0100000 - 0xc0397a33 (2654 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.82 BogoMIPS (lpj=7447648)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
More than 8 CPUs detected - skipping them.
Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b
CPU 1 irqstacks, hard=c0527000 soft=c0517000
Booting processor 1/8 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3723.84 BogoMIPS (lpj=7447688)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU1: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
CPU 2 irqstacks, hard=c0528000 soft=c0518000
Booting processor 2/16 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3723.85 BogoMIPS (lpj=7447701)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 4
CPU: Processor Core ID: 0
CPU2: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
CPU 3 irqstacks, hard=c0529000 soft=c0519000
Booting processor 3/24 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3723.86 BogoMIPS (lpj=7447726)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 6
CPU: Processor Core ID: 0
CPU3: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
CPU 4 irqstacks, hard=c052a000 soft=c051a000
Booting processor 4/2 ip 6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 3723.78 BogoMIPS (lpj=7447570)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU4: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
CPU 5 irqstacks, hard=c052b000 soft=c051b000
Booting processor 5/10 ip 6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 3723.83 BogoMIPS (lpj=7447663)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 2
CPU5: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
CPU 6 irqstacks, hard=c052c000 soft=c051c000
Booting processor 6/18 ip 6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 3723.82 BogoMIPS (lpj=7447658)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 4
CPU: Processor Core ID: 2
CPU6: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
CPU 7 irqstacks, hard=c052d000 soft=c051d000
Booting processor 7/26 ip 6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 3723.83 BogoMIPS (lpj=7447673)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 6
CPU: Processor Core ID: 2
CPU7: Intel(R) Xeon(R) CPU L7345 @ 1.86GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (29790.66 BogoMIPS).
net_namespace: 596 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
No dock devices found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
PCI: Dell PowerEdge R900 detected, enabling pci=bfsort.
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: Dell Inc.
ACPI: DMI Product Name: PowerEdge R900
ACPI: DMI Product Version:
ACPI: DMI Board Name: 0C764H
ACPI: DMI BIOS Vendor: Dell Inc.
ACPI: DMI BIOS Date: 03/23/2008
ACPI: Please send DMI info above to linux-acpi@xxxxxxxxxxxxxxx
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@xxxxxxxxxxxxxxx
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:16:00.0: PME# supported from D0 D3hot D3cold
pci 0000:16:00.0: PME# disabled
pci 0000:16:00.3: PME# supported from D0 D3hot D3cold
pci 0000:16:00.3: PME# disabled
pci 0000:17:00.0: PME# supported from D0 D3hot D3cold
pci 0000:17:00.0: PME# disabled
pci 0000:17:01.0: PME# supported from D0 D3hot D3cold
pci 0000:17:01.0: PME# disabled
pci 0000:19:00.0: supports D1
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: PME# disabled
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:0b:00.0: PME# supported from D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:0d:02.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:02.0: PME# disabled
pci 0000:0d:04.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:04.0: PME# disabled
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
pci 0000:11:02.0: PME# supported from D0 D3hot D3cold
pci 0000:11:02.0: PME# disabled
pci 0000:11:04.0: PME# supported from D0 D3hot D3cold
pci 0000:11:04.0: PME# disabled
pci 0000:1b:0c.0: supports D1
pci 0000:1b:0c.0: supports D2
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN2.BCOM._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN3.BCOM._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN4.BCOM._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.UPST.DWN5.BCOM._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.UPST.DWNC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.UPST.DWNC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 4
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 6
Switched to high resolution mode on CPU 7
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x880-0x8bf has been reserved
system 00:07: ioport range 0x8c0-0x8df has been reserved
system 00:07: ioport range 0x8e0-0x8e3 has been reserved
system 00:07: ioport range 0x8f0-0x8f1 has been reserved
system 00:07: ioport range 0x900-0x900 has been reserved
system 00:07: ioport range 0xc00-0xc7f has been reserved
system 00:07: ioport range 0xca0-0xca7 has been reserved
system 00:07: ioport range 0xca9-0xcab has been reserved
system 00:07: ioport range 0xcad-0xcaf has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:14
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: disabled
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:17:00.0: PCI bridge, secondary bus 0000:19
pci 0000:17:00.0: IO window: 0xe000-0xefff
pci 0000:17:00.0: MEM window: 0xde200000-0xde3fffff
pci 0000:17:00.0: PREFETCH window: disabled
pci 0000:17:01.0: PCI bridge, secondary bus 0000:18
pci 0000:17:01.0: IO window: disabled
pci 0000:17:01.0: MEM window: disabled
pci 0000:17:01.0: PREFETCH window: disabled
pci 0000:16:00.0: PCI bridge, secondary bus 0000:17
pci 0000:16:00.0: IO window: 0xe000-0xefff
pci 0000:16:00.0: MEM window: 0xde200000-0xde3fffff
pci 0000:16:00.0: PREFETCH window: disabled
pci 0000:16:00.3: PCI bridge, secondary bus 0000:1a
pci 0000:16:00.3: IO window: disabled
pci 0000:16:00.3: MEM window: disabled
pci 0000:16:00.3: PREFETCH window: disabled
pci 0000:00:02.0: PCI bridge, secondary bus 0000:16
pci 0000:00:02.0: IO window: 0xe000-0xefff
pci 0000:00:02.0: MEM window: 0xde100000-0xde3fffff
pci 0000:00:02.0: PREFETCH window: disabled
pci 0000:02:01.0: PCI bridge, secondary bus 0000:03
pci 0000:02:01.0: IO window: disabled
pci 0000:02:01.0: MEM window: disabled
pci 0000:02:01.0: PREFETCH window: disabled
pci 0000:0a:00.0: PCI bridge, secondary bus 0000:0b
pci 0000:0a:00.0: IO window: disabled
pci 0000:0a:00.0: MEM window: 0xd6000000-0xd7ffffff
pci 0000:0a:00.0: PREFETCH window: disabled
pci 0000:02:02.0: PCI bridge, secondary bus 0000:0a
pci 0000:02:02.0: IO window: disabled
pci 0000:02:02.0: MEM window: 0xd6000000-0xd7ffffff
pci 0000:02:02.0: PREFETCH window: disabled
pci 0000:08:00.0: PCI bridge, secondary bus 0000:09
pci 0000:08:00.0: IO window: disabled
pci 0000:08:00.0: MEM window: 0xd8000000-0xd9ffffff
pci 0000:08:00.0: PREFETCH window: disabled
pci 0000:02:03.0: PCI bridge, secondary bus 0000:08
pci 0000:02:03.0: IO window: disabled
pci 0000:02:03.0: MEM window: 0xd8000000-0xd9ffffff
pci 0000:02:03.0: PREFETCH window: disabled
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: IO window: disabled
pci 0000:06:00.0: MEM window: 0xda000000-0xdbffffff
pci 0000:06:00.0: PREFETCH window: disabled
pci 0000:02:04.0: PCI bridge, secondary bus 0000:06
pci 0000:02:04.0: IO window: disabled
pci 0000:02:04.0: MEM window: 0xda000000-0xdbffffff
pci 0000:02:04.0: PREFETCH window: disabled
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: IO window: disabled
pci 0000:04:00.0: MEM window: 0xdc000000-0xddffffff
pci 0000:04:00.0: PREFETCH window: disabled
pci 0000:02:05.0: PCI bridge, secondary bus 0000:04
pci 0000:02:05.0: IO window: disabled
pci 0000:02:05.0: MEM window: 0xdc000000-0xddffffff
pci 0000:02:05.0: PREFETCH window: disabled
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0: IO window: disabled
pci 0000:01:00.0: MEM window: 0xd6000000-0xddffffff
pci 0000:01:00.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: 0xd6000000-0xddffffff
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:0d:02.0: PCI bridge, secondary bus 0000:0f
pci 0000:0d:02.0: IO window: disabled
pci 0000:0d:02.0: MEM window: disabled
pci 0000:0d:02.0: PREFETCH window: disabled
pci 0000:0d:04.0: PCI bridge, secondary bus 0000:0e
pci 0000:0d:04.0: IO window: disabled
pci 0000:0d:04.0: MEM window: disabled
pci 0000:0d:04.0: PREFETCH window: disabled
pci 0000:0c:00.0: PCI bridge, secondary bus 0000:0d
pci 0000:0c:00.0: IO window: disabled
pci 0000:0c:00.0: MEM window: disabled
pci 0000:0c:00.0: PREFETCH window: disabled
pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:11:02.0: PCI bridge, secondary bus 0000:13
pci 0000:11:02.0: IO window: disabled
pci 0000:11:02.0: MEM window: disabled
pci 0000:11:02.0: PREFETCH window: disabled
pci 0000:11:04.0: PCI bridge, secondary bus 0000:12
pci 0000:11:04.0: IO window: disabled
pci 0000:11:04.0: MEM window: disabled
pci 0000:11:04.0: PREFETCH window: disabled
pci 0000:10:00.0: PCI bridge, secondary bus 0000:11
pci 0000:10:00.0: IO window: disabled
pci 0000:10:00.0: MEM window: disabled
pci 0000:10:00.0: PREFETCH window: disabled
pci 0000:00:06.0: PCI bridge, secondary bus 0000:10
pci 0000:00:06.0: IO window: disabled
pci 0000:00:06.0: MEM window: disabled
pci 0000:00:06.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:1b
pci 0000:00:1e.0: IO window: 0xd000-0xdfff
pci 0000:00:1e.0: MEM window: 0xde400000-0xde4fffff
pci 0000:00:1e.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
pci 0000:00:01.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:02.0: setting latency timer to 64
pci 0000:16:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:16:00.0: setting latency timer to 64
pci 0000:17:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:17:00.0: setting latency timer to 64
pci 0000:17:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:17:01.0: setting latency timer to 64
pci 0000:16:00.3: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37
pci 0000:00:03.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:02:01.0: setting latency timer to 64
pci 0000:02:02.0: setting latency timer to 64
pci 0000:0a:00.0: setting latency timer to 64
pci 0000:02:03.0: setting latency timer to 64
pci 0000:08:00.0: setting latency timer to 64
pci 0000:02:04.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:02:05.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:04.0: setting latency timer to 64
pci 0000:0c:00.0: setting latency timer to 64
pci 0000:0d:02.0: setting latency timer to 64
pci 0000:0d:04.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
pci 0000:00:06.0: setting latency timer to 64
pci 0000:10:00.0: setting latency timer to 64
pci 0000:11:02.0: setting latency timer to 64
pci 0000:11:04.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 1234
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
pci 0000:1b:0c.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pcieport-driver 0000:00:03.0: setting latency timer to 64
pcieport-driver 0000:00:03.0: found MSI capability
pci_express 0000:00:03.0:pcie00: allocate port service
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: found MSI capability
pci_express 0000:00:04.0:pcie00: allocate port service
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: found MSI capability
pci_express 0000:00:06.0:pcie00: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pcieport-driver 0000:01:00.0: setting latency timer to 64
pcieport-driver 0000:02:01.0: setting latency timer to 64
pcieport-driver 0000:02:01.0: found MSI capability
pcieport-driver 0000:02:02.0: setting latency timer to 64
pcieport-driver 0000:02:02.0: found MSI capability
pcieport-driver 0000:02:03.0: setting latency timer to 64
pcieport-driver 0000:02:03.0: found MSI capability
pcieport-driver 0000:02:04.0: setting latency timer to 64
pcieport-driver 0000:02:04.0: found MSI capability
pcieport-driver 0000:02:05.0: setting latency timer to 64
pcieport-driver 0000:02:05.0: found MSI capability
pcieport-driver 0000:0c:00.0: setting latency timer to 64
pcieport-driver 0000:0d:02.0: setting latency timer to 64
pcieport-driver 0000:0d:02.0: found MSI capability
pcieport-driver 0000:0d:04.0: setting latency timer to 64
pcieport-driver 0000:0d:04.0: found MSI capability
pcieport-driver 0000:10:00.0: setting latency timer to 64
pcieport-driver 0000:11:02.0: setting latency timer to 64
pcieport-driver 0000:11:02.0: found MSI capability
pcieport-driver 0000:11:04.0: setting latency timer to 64
pcieport-driver 0000:11:04.0: found MSI capability
pcieport-driver 0000:16:00.0: setting latency timer to 64
pcieport-driver 0000:17:00.0: setting latency timer to 64
pcieport-driver 0000:17:00.0: found MSI capability
pcieport-driver 0000:17:01.0: setting latency timer to 64
pcieport-driver 0000:17:01.0: found MSI capability
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
processor ACPI0007:00: registered as cooling_device0
processor ACPI0007:01: registered as cooling_device1
processor ACPI0007:02: registered as cooling_device2
processor ACPI0007:03: registered as cooling_device3
processor ACPI0007:04: registered as cooling_device4
processor ACPI0007:05: registered as cooling_device5
processor ACPI0007:06: registered as cooling_device6
processor ACPI0007:07: registered as cooling_device7
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.9 (July 18, 2008)
bnx2 0000:05:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem dc000000, IRQ 38, node addr 00:1e:c9:d9:84:57
bnx2 0000:07:00.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem da000000, IRQ 37, node addr 00:1e:c9:d9:84:59
bnx2 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d8000000, IRQ 19, node addr 00:1e:c9:d9:84:5b
bnx2 0000:0b:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
eth3: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d6000000, IRQ 18, node addr 00:1e:c9:d9:84:5d
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
hda: TSSTcorpDVD-ROM TS-L333A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 25:slot 0:func 0
megaraid_sas 0000:19:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
megaraid_sas 0000:19:00.0: setting latency timer to 64
megasas: FW now in Ready state
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5
scsi 0:0:2:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5
scsi 0:0:3:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5
scsi 0:0:4:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5
scsi 0:0:5:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5
scsi 0:0:6:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5
scsi 0:0:7:0: Direct-Access SEAGATE ST973451SS SM04 PQ: 0 ANSI: 5
scsi 0:0:32:0: Enclosure DP BACKPLANE 1.06 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access DELL PERC 6/i 1.11 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:2:0:0: [sda] 710410240 512-byte hardware sectors (363730 MB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:2:0:0: [sda] 710410240 512-byte hardware sectors (363730 MB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
sd 0:2:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: BAR 0: can't reserve I/O region [0x1f0-0x1f7]
ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16)
ata_piix 0000:00:1f.2: BAR 2: can't reserve I/O region [0x170-0x177]
ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16)
ata_piix 0000:00:1f.2: no available native port
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xde0ffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-rc3 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000cc80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-rc3 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cca0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-rc3 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ccc0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: New USB device found, idVendor=413c, idProduct=a001
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-rc3 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000cce0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-7: new high speed USB device using ehci_hcd and address 4
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-rc3 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usb 1-7: configuration #1 chosen from 1 choice
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 2 ports detected
input: PC Speaker as /devices/platform/pcspkr/input/input1
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
coretemp coretemp.4: Using relative temperature scale!
coretemp coretemp.5: Using relative temperature scale!
coretemp coretemp.6: Using relative temperature scale!
coretemp coretemp.7: Using relative temperature scale!
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
EDAC MC: Ver: 2.1.0 Aug 18 2008
usb 1-7: New USB device found, idVendor=04b4, idProduct=6560
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=0624, idProduct=0294
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Dell 03R874
usb 3-1: Manufacturer: Avocent
usb 1-2.1: new full speed USB device using ehci_hcd and address 5
usb 1-2.1: configuration #1 chosen from 1 choice
usb 1-2.1: New USB device found, idVendor=413c, idProduct=0000
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.1: Product: DRAC5
usb 1-2.1: Manufacturer: Dell
usb 1-2.1: SerialNumber: 0000000
usb 1-7.1: new high speed USB device using ehci_hcd and address 6
usb 1-7.1: configuration #1 chosen from 1 choice
hub 1-7.1:1.0: USB hub found
hub 1-7.1:1.0: 2 ports detected
usb 1-7.1: New USB device found, idVendor=04b4, idProduct=6560
usb 1-7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver hiddev
input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
input: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.1-1
input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3
input: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.1-1
input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input4
input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-2.1
input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.1/input/input5
input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-2.1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
ALSA device list:
No soundcards found.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 260k freed
Adding 27350652k swap on /dev/sda3. Priority:-1 extents:1 across:27350652k
bnx2: eth0: using MSI
bnx2: eth1: using MSI
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex