forcedeth: option to disable 100Hz timer

[Mikhail Kshevetskiy]

On some hardware no TX done interrupts are generated, thus special
100Hz timer interrupt is required to handle this situation properly.
Other device do not require that timer interrupt feature.

Patch add a "disable_timerirq" option to disable interrupt timer 
mentioned above. This may be extremely usefull for laptop users.

Mikhail Kshevetskiy
--- linux-2.6.27-rc5/drivers/net/forcedeth.c.orig	2008-09-02 00:58:07.000000000 +0400
+++ linux-2.6.27-rc5/drivers/net/forcedeth.c	2008-09-02 02:02:34.000000000 +0400
@@ -842,6 +842,16 @@
 static int poll_interval = -1;
 
 /*
+ * On some hardware no TX done interrupts are generated, thus special
+ * timer interrupt is required to handle this situation properly.
+ *
+ * Setting this variable to 1 leads to removing DEV_NEED_TIMERIRQ from
+ * the driver_data flags and thus disable 100Hz timer mentioned above.
+ * This may be extremely usefull for laptop users.
+ */
+static int disable_timerirq = 0;
+
+/*
  * MSI interrupts
  */
 enum {
@@ -5704,7 +5714,7 @@
 			np->msi_flags |= 0x0001;
 	}
 
-	if (id->driver_data & DEV_NEED_TIMERIRQ)
+	if (id->driver_data & DEV_NEED_TIMERIRQ && !disable_timerirq)
 		np->irqmask |= NVREG_IRQ_TIMER;
 	if (id->driver_data & DEV_NEED_LINKTIMER) {
 		dprintk(KERN_INFO "%s: link timer on.\n", pci_name(pci_dev));
@@ -6180,6 +6190,8 @@
 MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0.");
 module_param(phy_cross, int, 0);
 MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
+module_param(disable_timerirq, int, 0);
+MODULE_PARM_DESC(disable_timerirq, "100Hz timer required for some hardware is disabled by setting to 1 and enabled by setting to 0.");
 
 MODULE_AUTHOR("Manfred Spraul <manfred@xxxxxxxxxxxxxxxx>");
 MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");