exception Emask 0x0 SAct 0x1 / SErr 0x0 action 0x2 frozen
From: Justin Piszcz
Date: Mon Sep 22 2008 - 09:19:42 EST
I could not agree more.
CC'ing the relevant mailing lists to see if someone out there has any idea
what more we could do as this has been affecting you (more so than myself,
but I would still like to get some sort of resolution as well, as it still
happens to me too):
Similar, but not the same issue:
Sep 17 20:20:05 p34 kernel: [1422169.440538] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Sep 17 20:20:05 p34 kernel: [1422169.440549] ata5.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0
Sep 17 20:20:05 p34 kernel: [1422169.440551] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Sep 17 20:20:05 p34 kernel: [1422169.440556] ata5.00: status: { DRDY }
Sep 17 20:20:05 p34 kernel: [1422169.440561] ata5: hard resetting link
Sep 17 20:20:06 p34 kernel: [1422169.744980] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 17 20:20:06 p34 kernel: [1422169.770448] ata5.00: configured for UDMA/133
Sep 17 20:20:06 p34 kernel: [1422169.770461] ata5: EH complete
(2.6.23.3) above
On Mon, 22 Sep 2008, Brian Rademacher wrote:
Works fine...Also works under heavy load with only 4 drives. I could only
get it to fail by doing a raid resync with 4 drives, except for the newer
kernel, which dies pretty easily..
What is really frustrating about it is that short of the bugzilla bug I
submitted, I don't know who would be willing to listen...A lot of the google
hits when searching "action 0x2 frozen" are related to a particular CDROM
drive, or general hardware failure. I really don't think that is the case
here, but I bet most of the kernel people think the same thing, so they have
no reason to care...
Sent: Monday, September 22, 2008 7:04 AM
Subject: Re: Hardware RAID
What about if you just 'stress' one drive?
1. dd if=/dev/sda of=/dev/null bs=1M &
Does it do it?
2. Same thing for sdb?
Justin.
On Mon, 22 Sep 2008, Brian Rademacher wrote:
I killed smartd for testing. Other than that, it seems entirely load
based. Anything disk intensive (backups, raid resync, a bunch of spam
comes in at once, etc.) makes it fail...
Sent: Monday, September 22, 2008 6:29 AM
Subject: Re: Hardware RAID
While the error happens for me as well it does NOT happen with that much
consistency, if I were you, I would start testing different kernels and
run it in single user mode (or as close to it as you can) to see if you
can narrow down what is causing it, also boot knoppix and see if it
occurs-- ?
Justin.
On Mon, 22 Sep 2008, Brian Rademacher wrote:
Doesn't look like a very powerful RAID card, so I may pass on it. I
don't think it will have the BW to run as fast as the software RAID
currently does since it's only a 64bit/66mhz PCI slot...
I hate to do the hardware RAID thing, but this error is killing me:
Sep 21 12:05:19 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
Sep 21 12:32:12 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
Sep 21 12:41:34 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
Sep 21 12:58:22 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
Sep 21 13:11:04 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
Sep 21 13:23:55 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
Sep 21 13:54:23 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
Sep 21 15:15:04 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
Sep 21 15:44:06 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
Sep 21 21:15:12 radfiles kernel: ata1.00: exception Emask 0x0 SAct 0x1
SErr 0x0 action 0x2 frozen
And at this point, I can either regress to a 4 drive RAID and don't
update the kernel, or move forward with hardware...
I don't see a fix coming any time soon, but maybe I'll try one of the
latest F10 kernels just to see if anything has changed...
----- Original Message ----- From: "Justin Piszcz"
Sent: Monday, September 22, 2008 2:05 AM
Subject: Re: Hardware RAID
On Sun, 21 Sep 2008, Brian Rademacher wrote:
The RAID gods must have been thinking about me. My MB has one of
these funny slots and supports ZCR, so for the price I'm going to jump
ship. I would guess (and hope) this solves the problem, especially
since I'll have to reconstruct the entire array...
http://cgi.ebay.com/2113600-R-Adaptec-Serial-ATA-RAID-2025SA-Storage_W0QQitemZ250295938636QQihZ015QQcategoryZ167QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Hm cool-- let me know how it goes.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/