CONFIG_ACPI_VIDEO on Thinkpad blanks display.

[carbonated beverage]

On Wed, Sep 24, 2008 at 11:02:44PM -0700, carbonated beverage wrote:
> I just upgraded from 2.6.25.17 to 2.6.26.5 on my Thinkpad Z61t, and found
> the brightness keys will cause the X server to die.  When using the
> brightness up/down keys, the screen will go blank -- Control+Alt+F# will
> still switch to a different virtual console, but switching back will not
> restore the video state.

(Subject changed to match the observed cause)

Figured out what the change was -- in 2.6.25.x, the brightness keys worked
without setting CONFIG_ACPI_VIDEO.  However, in 2.6.26.x, the brightness keys
do not work on the console without that enabled.

If 2.6.25.x has that config option enabled, I still get the same blank screen
symptoms -- with the following in the X logs:

(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) I810(0): Next ACPI _DGS [0] 0x80000100
(II) I810(0): ACPI Toggle devices 0x1
(II) I810(0): ACPI Toggle to 0x1
(II) I810(0): Hotkey switch to 0x800.
(II) I810(0): Attachable device 0x80000100.
(II) I810(0): Attachable device 0x80000240.
(II) I810(0): Attachable device 0x80000410.
(II) I810(0): Requested display devices 0x800.
(II) I810(0): Toggle (1) 0x1
(II) I810(0): Detected duplicate devices. Toggling (0x1)
(II) I810(0): Detected display change operation (0x0, 0x800, 0x1).
(II) I810(0): Clearing Clone mode
(II) I810(0): Primary pipe is now A.
(--) I810(0): A non-CRT device is attached to pipe A.
        No refresh rate overrides will be attempted.
(II) I810(0): Display plane A is enabled and connected to Pipe A.
(II) I810(0): Display plane B is disabled and connected to Pipe B.
(II) I810(0): Enabling plane A.
(II) I810(0): Display plane A is now enabled and connected to Pipe A.
(II) I810(0): Display plane B is now disabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x80000000
(II) I810(0): PIPEBCONF is 0x00000000
(II) I810(0): Mode bandwidth is 58 Mpixel/s
(II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 48 Mbyte/s, 0 Mb
yte/s
(WW) I810(0): Changing XVideo pipe (1 to 0).

Without CONFIG_ACPI_VIDEO, the above message don't appear.  From this point,
any pointers on figuring out why the ACPI features makes the screen go blank?

-- DN
Daniel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/