2.6.27-rc7, freezes with > 1 s2ram cycle
From: Soeren Sonnenburg
Date: Mon Sep 29 2008 - 07:33:15 EST
Dear all,
my macbook pro1,1 works rock solid with -rc7 when it is freshly booted.
However as soon as I perform a suspend to ram + wakeup cycle, it might
freeze in the middle of some operation (e.g. backup or updatedb etc).
This is now with all the drivers being open source (xorg-ati, ath5k) but
exactly what I was observing before when only the closed source drivers
were available (so this is not a regression but a long standing bug > 1
year now).
Is anyone else observing this or has an idea how to isolate the problem?
Dmesg and lspci are attached.
Soeren
Linux version 2.6.27-rc7-sonne (sonne@no) (gcc version 4.3.2 (Debian 4.3.2-1) ) #2 SMP PREEMPT Wed Sep 24 14:08:03 CEST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f05f000 (usable)
BIOS-e820: 000000007f05f000 - 000000007f260000 (ACPI NVS)
BIOS-e820: 000000007f260000 - 000000007febf000 (ACPI data)
BIOS-e820: 000000007febf000 - 000000007feef000 (ACPI NVS)
BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data)
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
last_pfn = 0x7f05f max_arch_pfn = 0x100000
kernel direct mapping tables up to 38000000 @ 7000-c000
RAMDISK: 37dfc000 - 37ff0000
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 APPLE )
ACPI: XSDT 7FEFD120, 0074 (r1 APPLE Apple00 55 1000013)
ACPI: FACP 7FEFB000, 00F4 (r3 APPLE Apple00 55 Loki 5F)
ACPI: DSDT 7FEF0000, 48C0 (r1 APPLE MacBookP 10001 INTL 20050309)
ACPI: FACS 7FEC1000, 0040
ACPI: HPET 7FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
ACPI: APIC 7FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
ACPI: MCFG 7FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
ACPI: ASF! 7FEF7000, 009C (r32 APPLE Apple00 1 Loki 5F)
ACPI: SBST 7FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
ACPI: ECDT 7FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
ACPI: SSDT 7FEBC000, 064F (r1 APPLE SataPri 1000 INTL 20050309)
ACPI: SSDT 7FEBB000, 069C (r1 APPLE SataSec 1000 INTL 20050309)
ACPI: SSDT 7FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
ACPI: DMI detected: Apple
1136MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00008000 - 0000f000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00006586f4] TEXT DATA BSS ==> [0000100000 - 00006586f4]
#4 [0037dfc000 - 0037ff0000] RAMDISK ==> [0037dfc000 - 0037ff0000]
#5 [0000659000 - 000065c000] INIT_PG_TABLE ==> [0000659000 - 000065c000]
#6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x0007f05f
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007f05f
On node 0 totalpages: 520190
free_area_init_node: node 0, pgdat c0589f00, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 288638 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ee000
PM: Registered nosave memory: 00000000000ee000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
PERCPU: Allocating 39900 bytes of per cpu data
NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516125
Kernel command line: root=/dev/sda3 resume=/dev/sda5 rw
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2163.757 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2055004k/2081148k available (3314k kernel code, 24844k reserved, 1401k data, 300k init, 1163644k highmem)
virtual kernel memory layout:
fixmap : 0xfff9f000 - 0xfffff000 ( 384 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05a2000 - 0xc05ed000 ( 300 kB)
.data : 0xc043c96a - 0xc059aee8 (1401 kB)
.text : 0xc0100000 - 0xc043c96a (3314 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 4329.82 BogoMIPS (lpj=7212523)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Genuine Intel(R) CPU 1600 @ 2.16GHz stepping 08
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4329.86 BogoMIPS (lpj=7212582)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU 1600 @ 2.16GHz stepping 08
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8658.69 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 812 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:07.0 reg 10 32bit mmio: [98404000, 98404fff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [98400000, 98403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [40a0, 40bf]
PCI: 0000:00:1d.1 reg 20 io port: [4080, 409f]
PCI: 0000:00:1d.2 reg 20 io port: [4060, 407f]
PCI: 0000:00:1d.3 reg 20 io port: [4040, 405f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [98405400, 984057ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [40e8, 40ef]
PCI: 0000:00:1f.1 reg 14 io port: [40fc, 40ff]
PCI: 0000:00:1f.1 reg 18 io port: [40e0, 40e7]
PCI: 0000:00:1f.1 reg 1c io port: [40f8, 40fb]
PCI: 0000:00:1f.1 reg 20 io port: [40c0, 40cf]
PCI: 0000:00:1f.2 reg 10 io port: [40d8, 40df]
PCI: 0000:00:1f.2 reg 14 io port: [40f4, 40f7]
PCI: 0000:00:1f.2 reg 18 io port: [40d0, 40d7]
PCI: 0000:00:1f.2 reg 1c io port: [40f0, 40f3]
PCI: 0000:00:1f.2 reg 20 io port: [4020, 402f]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [98405000, 984053ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [efa0, efbf]
PCI: 0000:01:00.0 reg 10 32bit mmio: [80000000, 8fffffff]
PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [98300000, 9830ffff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
PCI: bridge 0000:00:01.0 32bit mmio: [98300000, 983fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [80000000, 8fffffff]
PCI: 0000:02:00.0 reg 10 64bit mmio: [98200000, 98203fff]
PCI: 0000:02:00.0 reg 18 io port: [2000, 20ff]
PCI: 0000:02:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [98200000, 982fffff]
PCI: 0000:03:00.0 reg 10 64bit mmio: [98100000, 9810ffff]
PCI: bridge 0000:00:1c.1 32bit mmio: [98100000, 981fffff]
PCI: bridge 0000:00:1c.2 io port: [1000, 1fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [94100000, 980fffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [90000000, 93ffffff]
PCI: 0000:0c:03.0 reg 10 32bit mmio: [94000000, 94000fff]
pci 0000:0c:03.0: supports D1
pci 0000:0c:03.0: supports D2
pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0c:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [94000000, 940fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x1640-0x164f) overlaps 0000:00:1c.2 BAR 7 (0x1000-0x1fff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:08: ioport range 0x680-0x6ef has been reserved
system 00:08: ioport range 0x800-0x80f has been reserved
system 00:08: ioport range 0x810-0x817 has been reserved
system 00:08: ioport range 0x400-0x47f has been reserved
system 00:08: ioport range 0x500-0x53f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x3000-0x3fff
pci 0000:00:01.0: MEM window: 0x98300000-0x983fffff
pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x0000008fffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0x98200000-0x982fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000098500000-0x000000985fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0x98100000-0x981fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: 0x1000-0x1fff
pci 0000:00:1c.2: MEM window: 0x94100000-0x980fffff
pci 0000:00:1c.2: PREFETCH window: 0x00000090000000-0x00000093ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0x94000000-0x940fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: power state changed by ACPI to D0
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [3000, 3fff]
bus: 01 index 1 mmio: [98300000, 983fffff]
bus: 01 index 2 mmio: [80000000, 8fffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [2000, 2fff]
bus: 02 index 1 mmio: [98200000, 982fffff]
bus: 02 index 2 mmio: [98500000, 985fffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [98100000, 981fffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [1000, 1fff]
bus: 04 index 1 mmio: [94100000, 980fffff]
bus: 04 index 2 mmio: [90000000, 93ffffff]
bus: 04 index 3 mmio: [0, 0]
bus: 0c index 0 mmio: [0, 0]
bus: 0c index 1 mmio: [94000000, 940fffff]
bus: 0c index 2 mmio: [0, 0]
bus: 0c index 3 io port: [0, ffff]
bus: 0c index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 2000k freed
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1746
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
ACPI: SSDT 7FEB9C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
ACPI: SSDT 7FEB9910, 02C3 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FEB9F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
ACPI: SSDT 7FEB8F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: power state changed by ACPI to D0
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
ata1.00: ATAPI: HL-DT-ST DVDRW GWA4080MA, AE38, max UDMA/33
ata1.00: failed to set xfermode (err_mask=0x100)
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRW GWA4080MA AE38 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x40d8 ctl 0x40f4 bmdma 0x4020 irq 19
ata4: SATA max UDMA/133 cmd 0x40d0 ctl 0x40f0 bmdma 0x4028 irq 19
ata3.01: ATA-7: ST9120821AS, 7.01, max UDMA/133
ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: configured for UDMA/133
scsi 2:0:1:0: Direct-Access ATA ST9120821AS 7.01 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 2:0:1:0: [sda] Attached SCSI disk
sd 2:0:1:0: Attached scsi generic sg1 type 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x98405400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-rc7-sonne ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-rc7-sonne uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-rc7-sonne uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27-rc7-sonne uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27-rc7-sonne uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: New USB device found, idVendor=05ac, idProduct=0218
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Apple Internal Keyboard / Trackpad
usb 2-2: Manufacturer: Apple Computer
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: IR Receiver
usb 4-2: Manufacturer: Apple Computer, Inc.
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
usbcore: registered new interface driver hiddev
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input2
input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input3
input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input4
input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI No-Shortcut mode
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2000KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Clocksource tsc unstable (delta = -158574020 ns)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
ext3_orphan_cleanup: deleting unreferenced inode 1229335
ext3_orphan_cleanup: deleting unreferenced inode 1229333
ext3_orphan_cleanup: deleting unreferenced inode 1229312
ext3_orphan_cleanup: deleting unreferenced inode 1229309
ext3_orphan_cleanup: deleting unreferenced inode 1229294
ext3_orphan_cleanup: deleting unreferenced inode 1229262
ext3_orphan_cleanup: deleting unreferenced inode 1229260
ext3_orphan_cleanup: deleting unreferenced inode 1229253
ext3_orphan_cleanup: deleting unreferenced inode 1229248
ext3_orphan_cleanup: deleting unreferenced inode 1229245
ext3_orphan_cleanup: deleting unreferenced inode 1229241
ext3_orphan_cleanup: deleting unreferenced inode 1229240
ext3_orphan_cleanup: deleting unreferenced inode 1229233
ext3_orphan_cleanup: deleting unreferenced inode 1229232
ext3_orphan_cleanup: deleting unreferenced inode 1229229
ext3_orphan_cleanup: deleting unreferenced inode 1229227
ext3_orphan_cleanup: deleting unreferenced inode 1229226
ext3_orphan_cleanup: deleting unreferenced inode 1229225
ext3_orphan_cleanup: deleting unreferenced inode 1229224
ext3_orphan_cleanup: deleting unreferenced inode 1229223
ext3_orphan_cleanup: deleting unreferenced inode 1229221
ext3_orphan_cleanup: deleting unreferenced inode 1229210
ext3_orphan_cleanup: deleting unreferenced inode 1229166
ext3_orphan_cleanup: deleting unreferenced inode 1229160
ext3_orphan_cleanup: deleting unreferenced inode 1229118
ext3_orphan_cleanup: deleting unreferenced inode 1229052
ext3_orphan_cleanup: deleting unreferenced inode 1807741
ext3_orphan_cleanup: deleting unreferenced inode 1814617
ext3_orphan_cleanup: deleting unreferenced inode 426194
ext3_orphan_cleanup: deleting unreferenced inode 1770196
ext3_orphan_cleanup: deleting unreferenced inode 1229247
ext3_orphan_cleanup: deleting unreferenced inode 1228811
ext3_orphan_cleanup: deleting unreferenced inode 1312401
ext3_orphan_cleanup: deleting unreferenced inode 1312296
ext3_orphan_cleanup: deleting unreferenced inode 1312329
ext3_orphan_cleanup: deleting unreferenced inode 1312342
ext3_orphan_cleanup: deleting unreferenced inode 1312364
ext3_orphan_cleanup: deleting unreferenced inode 1935478
EXT3-fs: sda3: 38 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 300k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on dm-0, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2099140k swap on /dev/sda5. Priority:-1 extents:1 across:2099140k
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8
ACPI: Sleep Button (CM) [SLPB]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input9
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
ACPI: Device needs an ACPI driver
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: v1.22 addr 0x98200000 irq 16 Yukon-2 EC rev 2
sky2 eth0: addr 00:16:cb:9b:35:cc
udev: renamed network interface eth0 to wired
firmware: requesting isight.fw
usbcore: registered new interface driver isight_firmware
appletouch: Geyser mode initialized.
input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input10
usbcore: registered new interface driver appletouch
Linux agpgart interface v0.103
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: STAC922x, Apple subsys_id=106b0200
EXT3 FS on sda3, internal journal
applesmc: Apple MacBook Pro detected:
applesmc: - Model with accelerometer
applesmc: - Model with light sensors and backlight
applesmc: - Model with 12 temperature sensors
applesmc: device successfully initialized (0xe0, 0x00).
applesmc: device successfully initialized.
applesmc: 2 fans found.
input: applesmc as /devices/platform/applesmc.768/input/input11
Registered led device: smc::kbd_backlight
applesmc: driver successfully loaded.
coretemp coretemp.0: Errata AE18 not fixed, update BIOS or microcode of the CPU!
coretemp coretemp.1: Errata AE18 not fixed, update BIOS or microcode of the CPU!
ath5k_pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath5k_pci 0000:03:00.0: setting latency timer to 64
ath5k_pci 0000:03:00.0: registered as 'phy0'
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR5424 chip found (MAC: 0xa3, PHY: 0x61)
udev: renamed network interface wlan0 to airport
fuse init (API version 7.9)
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level CPU
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level CPU
groups: 0-1
microcode: CPU0 updated from revision 0x0 to 0x39, date = 11152005
microcode: CPU1 updated from revision 0x0 to 0x39, date = 11152005
usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -75
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
usb 5-1: USB disconnect, address 2
usb 5-1: new full speed USB device using uhci_hcd and address 3
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: New USB device found, idVendor=05ac, idProduct=8205
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: HCI USB driver ver 2.10
usbcore: registered new interface driver hci_usb
usb 1-4: USB disconnect, address 3
usb 1-4: new high speed USB device using ehci_hcd and address 7
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: New USB device found, idVendor=05ac, idProduct=8501
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Built-in iSight
usb 1-4: Manufacturer: Micron
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
input: Built-in iSight as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ADDRCONF(NETDEV_UP): airport: link is not ready
sky2 wired: enabling interface
ADDRCONF(NETDEV_UP): wired: link is not ready
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: setting latency timer to 64
[drm] Initialized radeon 1.29.0 20080528 on minor 0
sky2 wired: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): wired: link becomes ready
[drm] Setting GART location based on new memory map
[drm] Loading R500 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 2 usecs
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
ALSA sound/pci/hda/hda_intel.c:605: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x001f1500
usb 1-3: new high speed USB device using ehci_hcd and address 8
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: New USB device found, idVendor=2040, idProduct=7050
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Nova-T Stick
usb 1-3: Manufacturer: Hauppauge
usb 1-3: SerialNumber: 4027524939
dib0700: loaded with support for 7 different device-types
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
firmware: requesting dvb-usb-dib0700-1.10.fw
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick)
DVB: registering frontend 0 (DiBcom 7000MA/MB/PA/PB/MC)...
MT2060: successfully identified (IF1 = 1240)
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input13
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
usb 1-3: USB disconnect, address 8
dvb-usb: Hauppauge Nova-T Stick successfully deinitialized and disconnected.
ACPI: EC: GPE storm detected, disabling EC GPE
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:07.0 Performance counters: Intel Corporation Device 27a3 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
0c:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)