Re: exception Emask 0x0 SAct 0x1 / SErr 0x0 action 0x2 frozen

[Christian]

I'm also experiencing the same issue..

These messages have been coming in from time to time (sometimes a couple per day).  I've tried getting around with this with various kernel settings such as noapic with no luck.

The drives are running on a Supermicro 8 port SATA card (AOC-SAT2-MV8) that's plugged into a standard PCI slot (not pci-x).

01:07.0 SCSI storage controller: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller (rev 09)



ata10.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
ata10.00: cmd 61/08:00:3f:59:70/00:00:74:00:00/40 tag 0 ncq 4096 out
         res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata10.00: status: { DRDY }
ata10: hard resetting link
ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata10.00: max_sectors limited to 256 for NCQ
ata10.00: max_sectors limited to 256 for NCQ
ata10.00: configured for UDMA/133
ata10: EH complete
sd 9:0:0:0: [sdg] 1953525168 512-byte hardware sectors (1000205 MB)
sd 9:0:0:0: [sdg] Write Protect is off
sd 9:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

ata11.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
ata11.00: cmd 60/18:00:bf:61:58/00:00:35:00:00/40 tag 0 ncq 12288 in
         res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata11.00: status: { DRDY }
ata11: hard resetting link
ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata11.00: max_sectors limited to 256 for NCQ
ata11.00: max_sectors limited to 256 for NCQ
ata11.00: configured for UDMA/133
ata11: EH complete
sd 10:0:0:0: [sdh] 1953525168 512-byte hardware sectors (1000205 MB)
sd 10:0:0:0: [sdh] Write Protect is off
sd 10:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

ata9.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
ata9.00: cmd 61/08:00:3f:59:70/00:00:74:00:00/40 tag 0 ncq 4096 out
         res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata9.00: status: { DRDY }
ata9: hard resetting link
ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9.00: max_sectors limited to 256 for NCQ
ata9.00: max_sectors limited to 256 for NCQ
ata9.00: configured for UDMA/133
ata9: EH complete
sd 8:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB)
sd 8:0:0:0: [sdf] Write Protect is off
sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/